r: 02059745 p: 7.107 pid: 42442 b: WERA q: 0 st: lt: 12 ean: 4013288039989 sr: WERA 05138259001 sr_no_br: 05138259001 sr_no_br_cl: 05138259001 sr_cl: WERA05138259001 sr_dash: sold: 14.214 p_range: none type: standard act: 1 avo: 1 av: Drive size TT9 Blade length 60 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Tamper Resistant n: WERA 367 TORX BO screwdriver with bore, TX 9 x 60 mm - 05138259001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low-fatigue working. TORX® BO screws have a protruding pin in their drive profile. This prevents any unauthorised loosening since the "normal" hex tools cannot move these screws. Only special TORX® BO tools have a bore hole which can slip over the pin. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Handle markings for simplified finding and sorting of the tool. Screwdrivers for recessed TORX® screws with safety pin Multi-component Kraftform handle for fast and ergonomic screwdriving For TORX® socket screws with safety pin Handle markings simplify finding and sorting of tools The Wera Black Point tip offers an exact fit and optimum corrosion protection Application TORX® screws with safety pin (BO = with bore hole) Blade Round Design Bore hole in TORX® section, chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that "normal" TORX® tools cannot be used. This pin fits into the borehole of TORX® BO tools allowing safety screws to be unfastened. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 367 TORX® BO Screwdriver for tamper-proof TORX® screws, TX 9 x 60 mm kts: screwdriver with bore, TX 9 x 60 mm kpn: 367 TORX BO kpn_dash: kpn_clear: 367TORXBO bkpn: WERA 367 TORX BO bkpn_clear: WERA 367TORXBO c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05138259001 sr_ns: WERA05138259001
r: 02830870 p: 6.942 pid: 42796 b: WERA q: 0 st: lt: 16 ean: 4013288181350 sr: WERA 05100060001 sr_no_br: 05100060001 sr_no_br_cl: 05100060001 sr_cl: WERA05100060001 sr_dash: sold: 13.884 p_range: none type: standard act: 1 avo: 1 av: Drive size T10 Drive type Torx Blade length 80 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V n: WERA 367 SB Torx screwdriver, TX 10 x 80 mm - 05100060001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and gentle work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Screwdriver for recessed TORX® screws Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away The Wera Black Point tip offers an exact fit and optimum corrosion protection Application TORX® socket screws Blade Round Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (green = TORX®) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 367 SB Screwdriver for TORX® screws, TX 10 x 80 mm kts: Torx screwdriver, TX 10 x 80 mm kpn: 367 SB kpn_dash: kpn_clear: 367SB bkpn: WERA 367 SB bkpn_clear: WERA 367SB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05100060001 sr_ns: WERA05100060001
r: 02828521 p: 6.942 pid: 42495 b: WERA q: 0 st: lt: 15 ean: 4013288155641 sr: WERA 05134654001 sr_no_br: 05134654001 sr_no_br_cl: 05134654001 sr_cl: WERA05134654001 sr_dash: sold: 13.884 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 15 Blade thickness Type of drive profile (bit) Torx Plus Tamper Resistant Connection size (bit) 1/4" VDE approved No Bit tip IPR15 n: WERA 867/4 IPR TORX PLUS bit with bore, 15 IPR x 50 mm - 05134654001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX PLUS® screws with safety pin. A 5-flank TORX PLUS® profile with bore hole. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For recessed TORX PLUS® IPR screws with safety pin TORX PLUS® IPR bit with bore hole on the output side Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX PLUS® IPR socket screws with safety pin Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits A 5-flank TORX PLUS® profile with a borehole. This drive geometry has only five flanks instead of the usual six and a borehole to protect safety screws against unauthorised unfastening. The screws cannot be turned with conventional, widely available tools. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 IPR TORX PLUS® bits with bore hole, 15 IPR x 50 mm kts: bit with bore, 15 IPR x 50 mm kpn: 867/4 IPR TORX PLUS kpn_dash: kpn_clear: 8674IPRTORXPLUS bkpn: WERA 867/4 IPR TORX PLUS bkpn_clear: WERA 8674IPRTORXPLUS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05134654001 sr_ns: WERA05134654001
r: 87010148 p: 6.89 pid: 72168 b: WERA q: 0 st: lt: 13 ean: 4013288011596 sr: WERA 05059486001 sr_no_br: 05059486001 sr_no_br_cl: 05059486001 sr_cl: WERA05059486001 sr_dash: sold: 13.78 p_range: none type: standard act: 1 avo: 1 av: Length 70 mm Blade thickness 1 mm Type of drive profile (bit) Slotted Connection size (bit) 1/4" VDE approved No Bit tip Slotted 5,5 mm Drive profile size (bit) 5,5 mm n: WERA 800/4 Z slotted screw bit, 1 x 5.5 x 70 mm - 05059486001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for slotted screws, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For slotted screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Slotted screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 800/4 Z bits, 1 x 5.5 x 70 mm kts: slotted screw bit, 1 x 5.5 x 70 mm kpn: 800/4 Z kpn_dash: kpn_clear: 8004Z bkpn: WERA 800/4 Z bkpn_clear: WERA 8004Z c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059486001 sr_ns: WERA05059486001
r: 41071184 p: 6.776 pid: 71805 b: WERA q: 0 st: lt: 12 ean: 4013288108180 sr: WERA 05009340001 sr_no_br: 05009340001 sr_no_br_cl: 05009340001 sr_cl: WERA05009340001 sr_dash: sold: 13.552 p_range: none type: standard act: 1 avo: 1 av: Drive size PZ0 Blade length 60 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Pozidriv n: WERA 355 SK PZ Pozidriv screwdriver, PZ 0 x 60 mm - 05009340001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver with hexagonal blade. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer for fast and low-fatigue working. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdriver, for cross-recess screws, Pozidriv Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal blade Chrome-plated Application Suitable for Pozidriv screws Blade Hexagonal, sizes 1 - 3 with bolster Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (black = Pozidriv) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Hexagonal blade and bolster for higher torque transfer. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 355 SK PZ Screwdriver for Pozidriv screws, PZ 0 x 60 mm kts: Pozidriv screwdriver, PZ 0 x 60 mm kpn: 355 SK PZ kpn_dash: kpn_clear: 355SKPZ bkpn: WERA 355 SK PZ bkpn_clear: WERA 355SKPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05009340001 sr_ns: WERA05009340001
r: 02830875 p: 6.776 pid: 42801 b: WERA q: 0 st: lt: 16 ean: 4013288181367 sr: WERA 05100061001 sr_no_br: 05100061001 sr_no_br_cl: 05100061001 sr_cl: WERA05100061001 sr_dash: sold: 13.552 p_range: none type: standard act: 1 avo: 1 av: Drive size T15 Drive type Torx Blade length 80 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V n: WERA 367 SB Torx screwdriver, TX 15 x 80 mm - 05100061001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and gentle work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Screwdriver for recessed TORX® screws Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away The Wera Black Point tip offers an exact fit and optimum corrosion protection Application TORX® socket screws Blade Round Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (green = TORX®) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 367 SB Screwdriver for TORX® screws, TX 15 x 80 mm kts: Torx screwdriver, TX 15 x 80 mm kpn: 367 SB kpn_dash: kpn_clear: 367SB bkpn: WERA 367 SB bkpn_clear: WERA 367SB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05100061001 sr_ns: WERA05100061001
r: 02824926 p: 6.776 pid: 45269 b: WERA q: 0 st: lt: 9 ean: 4013288104007 sr: WERA 05066941001 sr_no_br: 05066941001 sr_no_br_cl: 05066941001 sr_cl: WERA05066941001 sr_dash: sold: 13.552 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 50 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 5/16" VDE approved No Bit tip T50 n: WERA 867/2 Z TORX bit, TX 50 x 50 mm - 05066941001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX® screws. Tough viscous for universal use. 5/16" hexagon, suitable for holders as per DIN ISO 1173-D 8. For recessed TORX® screws Tough for hard materials 5/16" hexagon drive (Wera connecting series 2) Application TORX® socket screws Drive 5/16" hexagon, suitable for DIN ISO 1173-D 8 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/2 Z TORX® bits, TX 50 x 50 mm kts: bit, TX 50 x 50 mm kpn: 867/2 Z TORX kpn_dash: kpn_clear: 8672ZTORX bkpn: WERA 867/2 Z TORX bkpn_clear: WERA 8672ZTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066941001 sr_ns: WERA05066941001
r: 41071241 p: 6.776 pid: 72595 b: WERA q: 0 st: lt: 12 ean: 4013288107343 sr: WERA 05032003001 sr_no_br: 05032003001 sr_no_br_cl: 05032003001 sr_cl: WERA05032003001 sr_dash: sold: 13.552 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 4 mm Blade length 100 mm Blade thickness 0,8 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 3335 saw-cut screwdriver, stainless steel, 0.8 x 4 x 100 mm - 05032003001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver out of stainless steel. The stainless tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. They can be used for industrial application without hesitation. The Lasertip tip literally bites into the head of the screw and thereby prevents any slipping out of the screw head. Multi-component Kraftform handle for fast and low-fatigue working. Take it easy Tool Finder: colour coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Slotted screwdriver -electrician's blade Stainless screwdriver for slotted screws Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Application Slotted screws Blade Round Design Lasertip stainless steel for minimising rust Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Screw stainless steel together with stainless steel! Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 3335 Screwdriver for slotted screws, stainless, 0.8 x 4 x 100 mm kts: saw-cut screwdriver, stainless steel, 0.8 x 4 x 100 mm kpn: 3335 kpn_dash: kpn_clear: 3335 bkpn: WERA 3335 bkpn_clear: WERA 3335 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05032003001 sr_ns: WERA05032003001
r: 02818562 p: 6.69 pid: 44536 b: WERA q: 0 st: lt: 12 ean: 4013288156228 sr: WERA 05380202001 sr_no_br: 05380202001 sr_no_br_cl: 05380202001 sr_cl: WERA05380202001 sr_dash: sold: 13.38 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH1 n: WERA 851/4 J bit Phillips, PH 1 x 89 mm - 05380202001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits, optimised for Asian PH screws. In particular, for applications with very small dimensions pursuant to the Japanese Camera Industrial Standard. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For Phillips screws Optimised for Japanese Phillips screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits J stands for Japan. J bits have been optimised to suit Asian PH screws. In particular, they are for use with very small dimensions as set out in the Japanese Camera Standard. ds: dsc: Scope of delivery 851/4 J bits, PH 1 x 89 mm kts: bit Phillips, PH 1 x 89 mm kpn: 851/4 J kpn_dash: kpn_clear: 8514J bkpn: WERA 851/4 J bkpn_clear: WERA 8514J c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05380202001 sr_ns: WERA05380202001
r: 02669001 p: 6.57 pid: 45900 b: WERA q: 0 st: lt: 6 ean: 4013288110596 sr: WERA 05118135001 sr_no_br: 05118135001 sr_no_br_cl: 05118135001 sr_cl: WERA05118135001 sr_dash: sold: 13.14 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Width across flats 3/16" With safety colour code 1000V ESD No Handle type Screwdriver handle Blade length 60 mm VDE approved No Product Range Wera Kraftform n: WERA 2069 kraftform micro cap screwdriver 3/16" x 60 mm - 05118135001 cn: NUT DRIVER cn2: NUT DRIVER cn_clear: NUTDRIVER d: Product description Premium Wera Micro insert wrench for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro nutsetter for hex head screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Anti-roll feature and rotating cap for rapid twisting E.g. for electricians, opticians, precision mechanics, jewellers or IT hardware fitters Application Hexagon headed bolts, screws and nuts Blade Round Design Chrome-plated Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (gray = external hexagon) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Indispensable for many users, including electronics technicians, opticians, precision engineers, jewellers, EDP hardware fitters and model-makers ds: dsc: Scope of delivery 2069 Nutdriver for electronic applications, 3/16" x 60 mm kts: kraftform micro cap screwdriver 3/16" x 60 mm kpn: 2069 kpn_dash: kpn_clear: 2069 bkpn: WERA 2069 bkpn_clear: WERA 2069 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Nut driver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera nut driver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118135001 sr_ns: WERA05118135001
r: 02835197 p: 6.57 pid: 42023 b: WERA q: 0 st: lt: 12 ean: 4013288184030 sr: WERA 05030406001 sr_no_br: 05030406001 sr_no_br_cl: 05030406001 sr_cl: WERA05030406001 sr_dash: sold: 13.14 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size T10 Blade length 60 mm Blade thickness ESD Yes Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Product Range Wera Kraftform n: WERA 1567 TORX HF ESD Micro Kraftform screwdriver with holding function, TX 10 x 60 mm - 05030406001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description ESD-safe Micro screwdriver. Dependable protection against electrostatic energy and associated damage. Holding function: the wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screw on the tool. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. The Black Point tip offers optimised corrosion protection and an exact fit. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. Kraftform Micro screwdriver for TORX® screws ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Holding function for TORX® screws Take it easy tool finder: colour coding according to profile and size Application TORX® socket screws Blade Round Design Holding function for TORX® screws made according to Acument Global Technologies Inc. specifications, chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (green = TORX®) and size stamp. Features and benefits The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! Multi-component screwdriver handle for ergonomic working. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allow rapid twisting. This makes time-consuming grip adjustments as with other conventional precision screwdrivers unnecessary. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 1567 TORX® HF ESD Kraftform Micro screwdriver with holding function for TORX® screws, TX 10 x 60 mm kts: Kraftform screwdriver with holding function, TX 10 x 60 mm kpn: 1567 TORX HF ESD Micro kpn_dash: kpn_clear: 1567TORXHFESDMicro bkpn: WERA 1567 TORX HF ESD Micro bkpn_clear: WERA 1567TORXHFESDMicro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05030406001 sr_ns: WERA05030406001
r: 02818178 p: 6.57 pid: 44470 b: WERA q: 0 st: lt: 13 ean: 4013288156730 sr: WERA 05380045001 sr_no_br: 05380045001 sr_no_br_cl: 05380045001 sr_cl: WERA05380045001 sr_dash: sold: 13.14 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 152 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 1/8" Drive profile size (bit) 1/8" Product Range Wera Hex-Plus n: WERA 840/4 Z Hex-Plus hexagon bit, 1/8" x 152 mm - 05380045001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z bits, 1/8" x 152 mm kts: hexagon bit, 1/8" x 152 mm kpn: 840/4 Z Hex-Plus kpn_dash: 840/4 Z Hex kpn_clear: 8404ZHexPlus bkpn: WERA 840/4 Z Hex-Plus bkpn_clear: WERA 8404ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05380045001 sr_ns: WERA05380045001
r: 02832320 p: 13.057 pid: 31207 b: WERA q: 0 st: lt: 16 ean: 4013288017505 sr: WERA 05053520001 sr_no_br: 05053520001 sr_no_br_cl: 05053520001 sr_cl: WERA05053520001 sr_dash: sold: 13.057 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Connection size (machine) 1/4" Connection type (machine) External hexagon With lock No Magnetic No Length 75 mm n: WERA 894/4/1 universal bit holder, 1/4" x 75 mm - 05053520001 cn: BIT HOLDER cn2: BIT HOLDER cn_clear: BITHOLDER d: Product description Universal holder for the take-up of bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3. Quick-release chuck for rapid bit change. 1/4" hexagonal, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3. Universal holder for the take-up of bits with 1/4" hexagon head drive Quick-release chuck for rapid bit change Non-magnetic design 1/4" hexagon drive (Wera connecting series 4) Application Suitable for 1/4" DIN ISO 1173-C 6,3 hexagon insert bits and Wera Series 1 Design With quick-release chuck Drive 1/4" hexagon, suitable for power tools with DIN ISO 1173-F 6,3 receiver Features and benefits For a firm, wobble-free connection between holder and bit with quick-release action. Simply push sleeve forward to change bits. The non-magnetic version prevents any unwanted attraction of metal filings. ds: dsc: Scope of delivery 894/4/1 Universal Bit Holder, 1/4" x 75 mm kts: universal bit holder, 1/4" x 75 mm kpn: 894/4/1 kpn_dash: kpn_clear: 89441 bkpn: WERA 894/4/1 bkpn_clear: WERA 89441 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Bit holder | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera bit holder sr_no_br_cl_ns: 05053520001 sr_ns: WERA05053520001
r: 41071196 p: 13.057 pid: 70707 b: WERA q: 0 st: lt: 7 ean: 4013288108104 sr: WERA 05007677001 sr_no_br: 05007677001 sr_no_br_cl: 05007677001 sr_cl: WERA05007677001 sr_dash: sold: 13.057 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 10 mm Blade length 175 mm Blade thickness 1,6 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 334 SK saw blade screwdriver, hexagonal key blade, 1.6 x 10 x 175 mm - 05007677001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdrivers with hexagonal blades. Multi-component Kraftform Plus handle. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Lasertip tips: microscopically roughened surface which bites firmly into the screw head. This means less slipping and less contact pressure being required. Comes with bolster to enable higher torque to be applied. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdriver for slotted screws Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal blade and bolster for higher torque transfer Lasertip tips for more secure fit in the screw head Application Slotted screws Blade Hexagonal with bolster from 0.8 x 4.5 Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Hexagonal blade and bolster for higher torque transfer. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery 334 SK Screwdriver for slotted screws, 1.6 x 10 x 175 mm kts: saw blade screwdriver, hexagonal key blade, 1.6 x 10 x 175 mm kpn: 334 SK kpn_dash: kpn_clear: 334SK bkpn: WERA 334 SK bkpn_clear: WERA 334SK c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05007677001 sr_ns: WERA05007677001
r: 02835456 p: 6.48 pid: 42073 b: WERA q: 0 st: lt: 11 ean: 4013288151704 sr: WERA 05118017001 sr_no_br: 05118017001 sr_no_br_cl: 05118017001 sr_cl: WERA05118017001 sr_dash: sold: 12.96 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size Slotted 2 mm Blade length 50 mm Blade thickness 0,3 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted Product Range Wera Kraftform n: WERA 2035 Micro Kraftform saw cut screwdriver, 0.30 x 2 x 50 mm - 05118017001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for slotted screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Anti-roll feature and rotating cap for rapid twisting The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Application Slotted screws Blade Round Design Chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Indispensable for many users, including electronics technicians, opticians, precision engineers, jewellers, EDP hardware fitters and model-makers ds: dsc: Scope of delivery 2035 Screwdriver for slotted screws for electronic applications, 0.30 x 2 x 50 mm kts: Kraftform saw cut screwdriver, 0.30 x 2 x 50 mm kpn: 2035 Micro kpn_dash: kpn_clear: 2035Micro bkpn: WERA 2035 Micro bkpn_clear: WERA 2035Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118017001 sr_ns: WERA05118017001
r: 08131806 p: 12.892 pid: 173617 b: WERA q: 0 st: lt: 8 ean: 4013288222725 sr: WERA 05007910001 sr_no_br: 05007910001 sr_no_br_cl: 05007910001 sr_cl: WERA05007910001 sr_dash: sold: 12.892 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size PZ2 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Pozidriv Product Range Wera Kraftform n: WERA 1855 PZ Kraftform Ball-Grip cross-head screwdriver - workplace sling, PZ 2 x 100 mm - 05007910001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Screwdriver with Kraftform series 1800 handle for Pozidriv screws. The handle fits perfectly in the hand. The convex shape allows the transmission of high torques. The soft handle zones ensure a good grip and low-loss power transmission. The hard handle zones allow a high power transmission, even when pressure is applied with the ball of the hand. The recesses at the upper end of the handle facilitate fine adjustment while screwdriving. Due to the narrow transition between handle and blade, even sunken screws in narrow areas can be easily reached. The anti-roll protection at the rear end of the handle hinders the tool from rolling away annoyingly at the workplace. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head which avoids unintentional slipping out of the screw. Screwdriver, for cross-recess screws, Pozidriv Kraftform series 1800 handle for high torques Soft handle zones for high power transmission Hard handle zones for palm pressure Handle recesses for your fingers allow fine adjustment Application Suitable for Pozidriv screws Blade Round Design Nicro matt, Lasertip Handle Kraftform Ball-Grip with anti-roll protection, multi-component. With Take it easy tool finder: Colour coding by profile (black = Pozidriv) and size stamping. Features and benefits It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The ergonomically shaped Kraftform Ball-Grip fits perfectly in the hand. Its convex shape allows the transmission of high torque transfer. The material used for the soft zones of the Kraftform Ball-Grip handle ensures a good grip and low-loss power transmission. The hard handle zones of the Kraftform Ball-Grip allow high power transmission, even when pressure is applied with the ball of the hand. The recesses at the upper end of the Kraftform Ball-Grip allow fine adjustment while screwdriving. Due to the narrow transition between handle and blade, even sunken screws in narrow areas can be easily reached. ds: dsc: Scope of delivery 1855 PZ Kraftform Ball-Grip Pozidriv-head screwdriver, PZ 2 x 100 mm kts: Kraftform Ball-Grip cross-head screwdriver - workplace sling, PZ 2 x 100 mm kpn: 1855 PZ kpn_dash: kpn_clear: 1855PZ bkpn: WERA 1855 PZ bkpn_clear: WERA 1855PZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05007910001 sr_ns: WERA05007910001
r: 41071191 p: 6.446 pid: 71813 b: WERA q: 0 st: lt: 12 ean: 4013288108050 sr: WERA 05007672001 sr_no_br: 05007672001 sr_no_br_cl: 05007672001 sr_cl: WERA05007672001 sr_dash: sold: 12.892 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 4,5 mm Blade length 90 mm Blade thickness 0,8 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 334 SK saw blade screwdriver, hexagonal key blade, 0.8 x 4.5 x 90 mm - 05007672001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdrivers with hexagonal blades. Multi-component Kraftform Plus handle. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Lasertip tips: microscopically roughened surface which bites firmly into the screw head. This means less slipping and less contact pressure being required. Comes with bolster to enable higher torque to be applied. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdriver for slotted screws Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal blade and bolster for higher torque transfer Lasertip tips for more secure fit in the screw head Application Slotted screws Blade Hexagonal with bolster from 0.8 x 4.5 Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Hexagonal blade and bolster for higher torque transfer. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery 334 SK Screwdriver for slotted screws, 0.8 x 4.5 x 90 mm kts: saw blade screwdriver, hexagonal key blade, 0.8 x 4.5 x 90 mm kpn: 334 SK kpn_dash: kpn_clear: 334SK bkpn: WERA 334 SK bkpn_clear: WERA 334SK c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05007672001 sr_ns: WERA05007672001
r: 02835713 p: 6.446 pid: 42032 b: WERA q: 0 st: lt: 8 ean: 4013288150189 sr: WERA 05345281001 sr_no_br: 05345281001 sr_no_br_cl: 05345281001 sr_cl: WERA05345281001 sr_dash: sold: 12.892 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Width across flats 6 mm With safety colour code 1000V ESD No Handle type Screwdriver handle Blade length 60 mm VDE approved No Product Range Wera Kraftform n: WERA 2069 kraftform micro cap screwdriver 6.0 x 60 mm - 05345281001 cn: NUT DRIVER cn2: NUT DRIVER cn_clear: NUTDRIVER d: Product description Premium Wera Micro insert wrench for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro nutsetter for hex head screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Anti-roll feature and rotating cap for rapid twisting E.g. for electricians, opticians, precision mechanics, jewellers or IT hardware fitters Application Hexagon headed bolts, screws and nuts Blade Round Design Chrome-plated Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (gray = external hexagon) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Indispensable for many users, including electronics technicians, opticians, precision engineers, jewellers, EDP hardware fitters and model-makers ds: dsc: Scope of delivery 2069 Nutdriver for electronic applications, 6 x 60 mm kts: kraftform micro cap screwdriver 6.0 x 60 mm kpn: 2069 kpn_dash: kpn_clear: 2069 bkpn: WERA 2069 bkpn_clear: WERA 2069 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Nut driver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera nut driver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05345281001 sr_ns: WERA05345281001
r: 02830658 p: 12.561 pid: 43173 b: WERA q: 0 st: lt: 10 ean: 4013288181220 sr: WERA 05100031001 sr_no_br: 05100031001 sr_no_br_cl: 05100031001 sr_cl: WERA05100031001 sr_dash: sold: 12.561 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 8 mm Drive type Slotted Blade length 175 mm Blade thickness 1,2 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V n: WERA 334 SB saw blade screwdriver, garage blade, 1.2 x 8 x 175 mm - 05100031001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform Plus handle for comfortable ergonomic screwdriving, avoiding blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head and unintentional slipping is a thing of the past. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Screwdriver for slotted screws Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal blade and bolster for higher torque transfer Lasertip tips for more secure fit in the screw head Application Slotted screws Blade Round Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component, sizes 2.0 x 12.0, 2.5 x 14.0: Kraftform with non-roll feature, single-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. ds: dsc: Scope of delivery 334 SB Screwdriver for slotted screws, 1.2 x 8 x 175 mm kts: saw blade screwdriver, garage blade, 1.2 x 8 x 175 mm kpn: 334 SB kpn_dash: kpn_clear: 334SB bkpn: WERA 334 SB bkpn_clear: WERA 334SB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05100031001 sr_ns: WERA05100031001
r: 02829546 p: 12.33 pid: 19020 b: WERA q: 0 st: lt: 12 ean: 4013288100061 sr: WERA 05002980001 sr_no_br: 05002980001 sr_no_br_cl: 05002980001 sr_cl: WERA05002980001 sr_dash: sold: 12.33 p_range: none type: standard act: 1 avo: 1 av: Length 175 mm Connection size (bit) 6 mm Drive profile size 1 (bit) 1 Bit tip 1 #1 Connection profile (bit) Hexagonal Bit tip 2 #2 Blade thickness 2 Blade thickness 1 Type of drive profile 2 (bit) Square Type of drive profile 1 (bit) Square Drive profile size 2 (bit) 2 n: WERA 68 combikling, square 1 x 175 mm - 05002980001 cn: DOUBLE-ENDED BIT cn2: DOUBLE-ENDED BIT cn_clear: DOUBLEENDEDBIT d: Product description Combination blade for Vario handles. The double-ended blades are made out of high quality bit material and are therefore particularly durable. The Wera Black Point tip offers a perfect fit and optimised corrosion protection. Combination blade square/square for Vario handle Chrome-plated hexagonal material, 6 mm Black Point tip offers a perfect fit with optimised corrosion protection 2 different drive sizes on one blade Application For square socket screws Blade 6 mm hexagon Design Chrome-plated, Black Point Features and benefits The 6 mm double-ended blades of 175 mm length are out of high quality bit material which gives them a particularly long service life. ds: dsc: Scope of delivery 68 Combination blade for square socket head screws, # 1 x 175 mm kts: combikling, square 1 x 175 mm kpn: 68 kpn_dash: kpn_clear: 68 bkpn: WERA 68 bkpn_clear: WERA 68 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Double-ended bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera double-ended bit sr_no_br_cl_ns: 05002980001 sr_ns: WERA05002980001
