r: 02832541 p: 49.752 pid: 42498 b: WERA q: 0 st: lt: 9 ean: 4013288134479 sr: WERA 05018283001 sr_no_br: 05018283001 sr_no_br_cl: 05018283001 sr_cl: WERA05018283001 sr_dash: sold: 796.032 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 6 Product Range Wera Kraftform n: WERA 932 S/6 Kraftform Wera screwdriver set: Screwdriver chisel + holder, 6-piece - 05018283001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description Wera Chiseldriver for fastening, chiselling and loosening seized screws. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. A hexagon blade out of high quality bit material that extends right through the blade ensures full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Comes with an impact cap for enhanced service life and reduced risk of splintering. More torque can be transferred with the help of an open-end or ring spanner applied to the integrated hexagonal bolster. In some cases equipped with a square take-up in the impact cap that enables higher torque transfer when screwdriving with the T-handle, Zyklop ratchet or Mini ratchet. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Chiseldriver for fastening, chiselling and loosening For both slotted and Phillips screws Hexagonal blade extending through the handle Impact cap with integrated square and bolster for the transfer of higher torque Storage rack for wall-mounting Application Slotted and Phillips screws, impact cap with integrated square socket for insertion of 1/4" blades for higher torque Content 6-piece set and rack in display carton Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. Even higher torque can be transferred by connecting the square drive version to a T-handle or Zyklop ratchet. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 932 S/6 Screwdriver set Kraftform Wera: Chiseldriver and rack, 6 pieces 2x 917 SPHS Screwdriver for Phillips screws: PH 1x90 mm, PH 2x113 mm 1x 932 A Screwdriver for slotted screws: 0.6 x 3.5 x 80 mm 3x 932 AS Screwdriver for slotted screws: 0.8x4.5x100 mm, 1x5.5x113 mm, 1.2x7x138 mm kts: Kraftform Wera screwdriver set: Screwdriver chisel + holder, 6-piece kpn: 932 S/6 kpn_dash: kpn_clear: 932S6 bkpn: WERA 932 S/6 bkpn_clear: WERA 932S6 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05018283001 sr_ns: WERA05018283001
r: 02835764 p: 43.966 pid: 41699 b: WERA q: 0 st: lt: 12 ean: 4013288118073 sr: WERA 05022728001 sr_no_br: 05022728001 sr_no_br_cl: 05022728001 sr_cl: WERA05022728001 sr_dash: sold: 791.388 p_range: none type: standard act: 1 avo: 1 av: Drive type Slotted VDE approved Yes With safety colour code 1000V No Quantity per set 7 n: WERA 3160 i/7 Rack screwdriver set stainless steel + holder, 7-piece - 05022728001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description High quality Kraftform Plus VDE screwdriver set out of stainless steel by Wera. The stainless tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. They can be used for industrial application without hesitation. The individual testing of the Kraftform Stainless VDE screwdrivers in a water bath at 10,000 volts as per DIN EN 60900 (IEC 60900) ensures safe working with voltages of up to 1,000 volts. Secure working is also ensured under extreme conditions and verified with the proven cold impact resistance at -40° C. Mainly with Lasertip: the Lasertip tip literally bites into the screw head and prevents any slipping out of the screw recess. Multi-component Kraftform handle for fast and low-fatigue working. Take it easy Tool Finder: colour coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Includes a practical rack for tidy storage of the screwdrivers. Insulated blades for secure work at 1,000 volts Multi-component Kraftform handle for high working speeds and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tip, stainless to prevent extraneous rust Kraftform stainless: the safety screwdriver for stainless steel screws, Lasertip blade + single-pole phase tester + rack. Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted and Phillips screws Contents Stainless steel, 7-piece set and rack in display carton Features and benefits Why are stainless elements so often affected by rust? One reason: screwdriving jobs are often carried out with a tool out of made from conventional steel which can result in extraneous rust forming. This is annoying. We were confident that this could be prevented by using tools likewise out of stainless steel and meeting the required standard of industrial hardness. A tool series out of stainless steel. The forming of extraneous rust is prevented and a special vacuum ice-hardening process ensures the required degree of hardness - and they are even VDE-tested, too. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 3160 i/7 Screwdriver set, stainless and rack, 7 pieces 1x 3247 Single-pole phase tester, stainless: 0.5 x 3 x 70 mm 4x 3160 i VDE Insulated screwdriver for slotted screws, stainless: 0.5x3x80 mm, 0.6x3.5x100 mm, 0.8x4x100 mm, 1x5.5x125 mm 2x 3162 i PH VDE Insulated screwdriver for Phillips screws, stainless: PH 2x100 mm, PH 1x80 mm kts: screwdriver set stainless steel + holder, 7-piece kpn: 3160 i/7 Rack kpn_dash: kpn_clear: 3160i7Rack bkpn: WERA 3160 i/7 Rack bkpn_clear: WERA 3160i7Rack c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set sr_no_br_cl_ns: 05022728001 sr_ns: WERA05022728001
r: 87010220 p: 5.17 pid: 70816 b: WERA q: 5 st: 1 lt: 1 ean: 4013288034014 sr: WERA 05056702001 sr_no_br: 05056702001 sr_no_br_cl: 05056702001 sr_cl: WERA05056702001 sr_dash: sold: 785.84 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ2 n: WERA 855/1 BDC PZ bit Pozidriv, PZ 2 x 25 mm - 05056702001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Bits for Pozidriv* screws with tiny diamond particles on the bit tip. This ensures a secure fit of the bit in the screw, reduces the contact pressure required and lowers the risk of slipping. Comes with Torsion zone where kinetic energy is diverted from peak loads . This greatly extends the product service life; 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. * Pozidriv = registered trademark of European Industrial Service Ltd. Suitable for Pozidriv screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out 1/4" hexagon drive (Wera connecting series 1) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design BiTorsion for long service life, diamond-coated for secure screw fit. Take it easy tool finder: Output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located. Features and benefits Particularly when applications involve sensitive materials or high quality surfaces are involved, bits with a diamond coating ensure that work is done safer, faster and at lower cost. Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. One of the greatest problems with power tool applications is that the conventional bit easily slips out of the head of the screw (cam-out). This often destroys both the head of the screw and the tool. High resulting costs are incurred e.g. from damaged surfaces and screw connections that can no longer be loosened. Screwdriving will become safer and more economic if this problem of slipping can be minimised. Today, the Wera diamond bit - manufactured with the technology specifically developed by Wera for this application - still sets the standard in terms of resilience and functionality. Wera bits with a diamond coating ensure a secure fit of the bit in the screw head. The minute diamond particles applied to the tip of the tool literally "bite" into the screw and ensure an exact, anti-slip fit in the head of the screw. This secure fit protects the screw. The cam-out forces which compel the user to apply greater pressure to the screw are considerably reduced. Ideal for sensitive materials The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 855/1 BDC bits, PZ 2 x 25 mm kts: bit Pozidriv, PZ 2 x 25 mm kpn: 855/1 BDC PZ kpn_dash: kpn_clear: 8551BDCPZ bkpn: WERA 855/1 BDC PZ bkpn_clear: WERA 8551BDCPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056702001 sr_ns: WERA05056702001
r: 41071339 p: 12.066 pid: 71931 b: WERA q: 2 st: 1 lt: 1 ean: 4013288121035 sr: WERA 05003529001 sr_no_br: 05003529001 sr_no_br_cl: 05003529001 sr_cl: WERA05003529001 sr_dash: sold: 772.224 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Connection size (machine) 1/4" Connection type (machine) Inner square With lock No Magnetic No Length 37 mm Product Range Wera Zyklop n: WERA 8784 A1 Zyklop adapter, 1/4" x 37 mm - 05003529001 cn: BIT HOLDER cn2: BIT HOLDER cn_clear: BITHOLDER d: Product description Connector from square head to hexagonal. For 1/4" hexagon bits as per DIN ISO 1173-C 6.3 and E 6.3 and Wera connection series 1 and 4. With quick-release chuck. 1/4" Zyklop adaptor with quick-release chuck for rapid bit change Suitable for 1/4" hex bits (Wera connecting series 1 and 4) Chrome vanadium steel Application Suitable for 1/4" hex bits as per DIN ISO 1173-C 6.3 and E 6.3 and Wera series 1 and 4 Design Quick-release chuck for fast bit changes, chromium vanadium Features and benefits Due to the ever-more confined working environment, space is becoming more and more an issue for the application of ratchets. Our product developers therefore intensively occupied themselves with the issue of confined working spaces, and Wera has now solved this problem. The extremely slim and robust Zyklop Metal ratchet with a long lever was what emerged. When the change in direction needs to be quick, the Zyklop Metal Switch ratchet is the right tool. When the socket must not get lost and a coincidental change of direction has to be avoided at all cost, the Zyklop Metal Push is the correct choice. ds: dsc: Scope of delivery 8784 A1 Zyklop bit adaptor, 1/4", 1/4" x 37 mm kts: Zyklop adapter, 1/4" x 37 mm kpn: 8784 A1 kpn_dash: kpn_clear: 8784A1 bkpn: WERA 8784 A1 bkpn_clear: WERA 8784A1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Bit holder | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera bit holder | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003529001 sr_ns: WERA05003529001
r: 03061484 p: 50.909 pid: 31860 b: WERA q: 0 st: lt: 9 ean: 4013288214591 sr: WERA 05057480001 sr_no_br: 05057480001 sr_no_br_cl: 05057480001 sr_cl: WERA05057480001 sr_dash: sold: 763.635 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch VDE approved No With safety colour code 1000V ESD No Non-sparking No Product Range Wera Kraftform n: WERA 826 T Kraftform Turbo bit holder with Rapidaptor quick-change function, 1/4" x 146 mm - 05057480001 cn: BIT SCREWDRIVER cn2: BIT SCREWDRIVER cn_clear: BITSCREWDRIVER d: Product description Many users would like to be able to carry out screwdriving processes faster without compromise. With a screwdriver that is precise, allows powerful screwdriving, and is much faster than a conventional screwdriver. A part-time universal gear is the solution: Integrated in the screwdriver handle, it quadruples the working speed with smooth couplings - purely mechanically. One hand holds the front part of the handle, the other hand turns the rear part of the handle. The turbo function can be switched on or off at the push of a button. Turning it off is recommended for tightening and loosening with high torque, e.g. for screw connections in wood, as well as for fine adjustments. Robust, maintenance-free gear made of steel with a maximum torque of 14Nm when the turbo function is deactivated. Thanks to the Rapidaptor bit holder, the Kraftform Turbo can be used with all conventional 1/4" hexagon bits for a wide variety of screw profiles. With the Rapidaptor function the bits can be inserted directly and can be easily removed by pushing the sleeve forward. 4 times the screwdriving speed thanks to the turbo function (purely mechanical - without battery) Activate and deactivate the turbo function by a simple push of a button Turbo function especially for smooth couplings Can be used without the turbo function like a normal screwdriver for couplings with steadily increasing torque, e.g. for screw connections in wood Robust, maintenance-free gear made of steel Application Suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6,3 and E 6,3 and Wera connection series 1 and 4 Design Connectable mechanic turbo function for quadrupling the screwdriving speed; robust, maintenance-free gear made of steel; 1/4" - hexagon socket mounting with Rapidaptor technology with rapid-in, rapid-out, rapid-spin, chuck-all and single-hand functions, magnetic Handle Kraftform with anti-roll protection, multi-component Features and benefits The construction of the Kraftform Turbo allows the speed of manual screwdriving to be quadrupled, especially for smooth couplings - without electricity! The turbo function can be activated as needed by pressing a button. Turning it off is recommended for tightening and loosening with high torque, e.g. for screw connections in wood as well as for fine adjustments. The robust steel design is maintenance-free and ensures a long product life. Thanks to the Rapidaptor bit holder, the Kraftform Turbo can be used with all conventional 1/4" bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. ds: dsc: Scope of delivery 826 T Kraftform Turbo bitholding handle with Rapidaptor quick-release chuck, 1/4" x 146 mm kts: bit holder with Rapidaptor quick-change function, 1/4" x 146 mm kpn: 826 T Kraftform Turbo kpn_dash: kpn_clear: 826TKraftformTurbo bkpn: WERA 826 T Kraftform Turbo bkpn_clear: WERA 826TKraftformTurbo c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Bit screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera bit screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05057480001 sr_ns: WERA05057480001
r: 41070399 p: 19.669 pid: 70624 b: WERA q: 3 st: 1 lt: 1 ean: 4013288018069 sr: WERA 05018272001 sr_no_br: 05018272001 sr_no_br_cl: 05018272001 sr_cl: WERA05018272001 sr_dash: sold: 747.422 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 12 mm Blade length 200 mm Blade thickness 2 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 932 A cutting screwdriver, 2 x 12 x 200 mm - 05018272001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera Chiseldriver for fastening, chiselling and loosening seized screws. Single-component Kraftfrom handle for fast and low-fatigue working. A hexagon blade out of high quality bit material that extends right through the blade ensures full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Comes with an impact cap for durability and reduced risk of splintering. More torque can be transferred with the help of an open-end or ring spanner applied to the integrated hexagonal bolster. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Chiseldriver for fastening, chiselling and loosening Hexagonal blade extending through the handle Single-component, ergonomic Kraftform handle Impact cap and bolster for the transfer of higher torque The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Slotted screws Blade Hexagonal throughout with impact cap, hexagonal bolster from 0.8 x 4.5 Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, sizes 2.0 x 12.0, 2.5 x 14.0: Kraftform with non-roll feature, single-component Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 932 A Screwdriver for slotted screws, 2 x 12 x 200 mm kts: cutting screwdriver, 2 x 12 x 200 mm kpn: 932 A kpn_dash: kpn_clear: 932A bkpn: WERA 932 A bkpn_clear: WERA 932A c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05018272001 sr_ns: WERA05018272001
r: 02829186 p: 39.173 pid: 42750 b: WERA q: 0 st: lt: 12 ean: 4013288178343 sr: WERA 05135938001 sr_no_br: 05135938001 sr_no_br_cl: 05135938001 sr_cl: WERA05135938001 sr_dash: sold: 744.287 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder type Halfmoon/HIOS VDE approved No With safety colour code 1000V ESD No Quantity per set 11 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt Micro 11 Universal 1 screwdriver handle fine mechanical applications, with interchangeable blades 11-piece - 05135938001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Kraftform Kompakt Micro Set for precision mechanical applications; suitable for the take-up of bits with 4 mm halfmoon drive (Wera series 9) and bits with 4 mm HIOS drive (Wera series 21); handle/interchangeable blade system for rapid blade change; Kaftform Micro handle with twist cap and free-turning zone for rapid twisting, making any time-consuming repositioning of the fingers unnecessary; power zone with integrated soft zones for the transfer of higher tightening and loosening torque; precision zone directly above the blade for the right angle for adjustment work; comes with 10 bits for manual as well as power tool operations; rapid fixing of the bit: just push the bit into the insert for automatic locking and a secure fit. To change the bit, simply push the sleeve forward and remove; free-turning sleeve for simple guidance of the tool during the screwdriving process. Kraftform Micro bit holder for precision mechanical work Handle/Interchangeable blade system for rapid exchange of the blade Multi-component Kraftform Micro handle with anti-roll feature and rotating cap Suitable for take-up of bits with 4 mm halfmoon drive and bits with 4 mm HIOS drive Applications e.g. on smartphones, mobile phones, cameras, electronic equipment 11-piece setPouch with 44 mm bits1 Kraftform Micro bitholding screwdriver 1013 Features and benefits Applications e.g. on smartphones, mobile phones, cameras, electronic equipment Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. ds: dsc: Scope of delivery Kraftform Kompakt Micro 11 Universal 1, 11 pieces 1x 1013 Kraftform Micro Bitholding screwdriver: 97 mm 3x 851/9 C J PH bits, halfmoon: PH 00 x 44x1.8 mm, PH 0 x 44x2.2 mm, PH 1 x 44x3 mm 2x 840/9 C bits Hex-Plus: 1.5x44 mm, 2x44 mm 3x 800/9 C bits: 0.23x1.5x44 mm, 0.40x2x44 mm, 0.50x3x44 mm 2x 867/9 C TORX® bits, halfmoon: TX 5x44 mm, TX 6x44 mm kts: screwdriver handle fine mechanical applications, with interchangeable blades 11-piece kpn: Kraftform Kompakt Micro 11 Universal 1 kpn_dash: kpn_clear: KraftformKompaktMicro11Universal1 bkpn: WERA Kraftform Kompakt Micro 11 Universal 1 bkpn_clear: WERA KraftformKompaktMicro11Universal1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05135938001 sr_ns: WERA05135938001
r: 03166842 p: 20 pid: 31922 b: WERA q: 1 st: 1 lt: 1 ean: 4013288212344 sr: WERA 05008871001 sr_no_br: 05008871001 sr_no_br_cl: 05008871001 sr_cl: WERA05008871001 sr_dash: sold: 720 p_range: none type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 5 n: WERA Stubby Set 2 screwdriver set 5-piece - 05008871001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description Especially small screwdrivers with short blades for hard to reach areas. The 2-component Kraftform handle with its practical combination of hard and soft zones allows for a firm grip and precise working. The blades have all the benefits of the Wera Bit technology. Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head. The hexagon anti-roll protection prevents annoying rolling away of bits in the workplace. Short compact shape for working in confined spaces Ergonomic 2-component Kraftform handle for precise work Blades with the benefits of the Wera Bit technology Hexagonal anti-roll feature against rolling away Take it easy tool finder: colour coding according to profile and size With Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted and Pozidriv screws Design 5-piece set in display carton Features and benefits With its compact handle shape and the short blade, the Kraftform Stubbies are particularly suitable for working in confined screwdriving situations. The 2-component Kraftform handle allows high power transmission due to the non-slip, softer grip areas and high working speeds due to the hard grip areas, which allow a quick hand switch. The special surface treatment of the blades sees to a high level of corrosion protection and optimum fitting accuracy of the screw. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery Stubby Set 2 Screwdriver set, 5 pieces 2x 355 PZ Pozidriv-head Stubby/carburetor screwdriver: PZ 1x25 mm, PZ 2x25 mm 3x 335 Stubby/carburetor screwdriver: 0.6x3.5x24.5 mm, 0.8x4x24.5 mm, 1x5.5x24.5 mm kts: screwdriver set 5-piece kpn: Stubby Set 2 kpn_dash: kpn_clear: StubbySet2 bkpn: WERA Stubby Set 2 bkpn_clear: WERA StubbySet2 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set sr_no_br_cl_ns: 05008871001 sr_ns: WERA05008871001
r: 03166837 p: 18.842 pid: 31326 b: WERA q: 1 st: 1 lt: 1 ean: 4013288212337 sr: WERA 05008870001 sr_no_br: 05008870001 sr_no_br_cl: 05008870001 sr_cl: WERA05008870001 sr_dash: sold: 715.996 p_range: none type: standard act: 1 avo: 1 av: Drive type Phillips; Slotted VDE approved No With safety colour code 1000V No Quantity per set 5 n: WERA Stubby Set 1 screwdriver set 5-piece - 05008870001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description Especially small screwdrivers with short blades for hard to reach areas. The 2-component Kraftform handle with its practical combination of hard and soft zones allows for a firm grip and precise working. The blades have all the benefits of the Wera Bit technology. Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head. The hexagon anti-roll protection prevents annoying rolling away of bits in the workplace. Short compact shape for working in confined spaces Ergonomic 2-component Kraftform handle for precise work Blades with the benefits of the Wera Bit technology Hexagonal anti-roll feature against rolling away Take it easy tool finder: colour coding according to profile and size With Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted and Phillips screws Design 5-piece set in display carton Features and benefits With its compact handle shape and the short blade, the Kraftform Stubbies are particularly suitable for working in confined screwdriving situations. The 2-component Kraftform handle allows high power transmission due to the non-slip, softer grip areas and high working speeds due to the hard grip areas, which allow a quick hand switch. The special surface treatment of the blades sees to a high level of corrosion protection and optimum fitting accuracy of the screw. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery Stubby Set 1 Screwdriver set, 5 pieces 2x 350 PH Phillips-head Stubby/carburetor screwdriver: PH 1x25 mm, PH 2x25 mm 3x 335 Stubby/carburetor screwdriver: 0.6x3.5x24.5 mm, 0.8x4x24.5 mm, 1x5.5x24.5 mm kts: screwdriver set 5-piece kpn: Stubby Set 1 kpn_dash: kpn_clear: StubbySet1 bkpn: WERA Stubby Set 1 bkpn_clear: WERA StubbySet1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Promotions / Promotions / Black friday / Black friday hand tools / Black friday hand tools screwdriver set | Home / Promotions / Promotions / Black friday / Wera black friday / Wera black friday hand tools sr_no_br_cl_ns: 05008870001 sr_ns: WERA05008870001
r: 87992229 p: 11.71 pid: 76604 b: WERA q: 109 st: 1 lt: 1 ean: 4013288017673 sr: WERA 05053457001 sr_no_br: 05053457001 sr_no_br_cl: 05053457001 sr_cl: WERA05053457001 sr_dash: sold: 714.31 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Connection size (machine) 1/4" Connection type (machine) Outer hexagon With lock No Magnetic Yes Length 50 mm n: WERA 899/4/1 universal bit holder, 1/4" x 50 mm - 05053457001 cn: BIT HOLDER cn2: BIT HOLDER cn_clear: BITHOLDER d: Product description Universal holder for mounting bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3. Stainless steel sleeve for outstanding corrosion protection. The retaining ring guarantees optimal fit of the tool in the holder. The strong permanent magnet holds the bits firmly. 1/4" hexagon, suitable for machine use with mounting as per DIN ISO 1173-F 6.3. Universal holder for the take-up of bits with 1/4" hexagon head drive Stainless sleeve, retaining ring and strong permanent magnet 1/4" hexagon drive (Wera connecting series 4) Application Suitable for 1/4" DIN ISO 1173-C 6,3 hexagon insert bits and Wera Series 1 Design With stainless steel sleeve, retaining ring, and strong permanent magnet Drive 1/4" hexagon, suitable for power tools with DIN ISO 1173-F 6,3 receiver Features and benefits The retaining ring and the strong permanent magnet ensure a particularly secure fitting of the bit in the holder. ds: dsc: Scope of delivery 899/4/1 Universal Bit Holder, 1/4" x 50 mm kts: universal bit holder, 1/4" x 50 mm kpn: 899/4/1 kpn_dash: kpn_clear: 89941 bkpn: WERA 899/4/1 bkpn_clear: WERA 89941 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Bit holder | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera bit holder sr_no_br_cl_ns: 05053457001 sr_ns: WERA05053457001
r: 41070397 p: 12.231 pid: 72450 b: WERA q: 1 st: 1 lt: 1 ean: 4013288018045 sr: WERA 05018268001 sr_no_br: 05018268001 sr_no_br_cl: 05018268001 sr_cl: WERA05018268001 sr_dash: sold: 709.398 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 9 mm Blade length 150 mm Blade thickness 1,6 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 932 A saw-cut screwdriver, 1.6 x 9 x 150 mm - 05018268001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera chiseldriver for screwdriving, chiseling, mortising and slackening stuck screws. With multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The pound-thru hexagonal blade made of premium bit material ensures power transmission without loss even at hammer blows. Tough tempered material to prevent the blade from splintering or breaking. With integrated impact cap to increase service life and reduce risk of splintering. Higher torques can be transmitted with open-end or ring spanners using the integrated hexagon bolster. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. With hexagon anti-roll protection to avoid bits from rolling away annoyingly in the workplace. Chiseldriver for fastening, chiselling and loosening Hexagonal blade extending through the handle Multi-component Kraftform handle for fast and ergonomic screwdriving Impact cap and bolster for the transfer of higher torque The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Slotted screws Blade Hexagonal throughout with impact cap, hexagonal bolster from 0.8 x 4.5 Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, sizes 2.0 x 12.0, 2.5 x 14.0: Kraftform with non-roll feature, single-component Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 932 A Screwdriver for slotted screws, 1.6 x 9 x 150 mm kts: saw-cut screwdriver, 1.6 x 9 x 150 mm kpn: 932 A kpn_dash: kpn_clear: 932A bkpn: WERA 932 A bkpn_clear: WERA 932A c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05018268001 sr_ns: WERA05018268001
r: 02098164 p: 33.719 pid: 43563 b: WERA q: 0 st: lt: 9 ean: 4013288028907 sr: WERA 05138250001 sr_no_br: 05138250001 sr_no_br_cl: 05138250001 sr_cl: WERA05138250001 sr_dash: sold: 708.099 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive type Torx Tamper Resistant VDE approved No With safety colour code 1000V No Supplied in Storage box Quantity per set 6 Product Range Wera Kraftform n: WERA 367/6 TORX BO Kraftform screwdriver set in holder 6-piece - 05138250001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 6-piece screwdriver set with Kraftform handle for pleasant, ergonomic working that prevents blisters and calluses. TORX® BO screws have a protruding pin in their drive profile. This prevents any unauthorised loosening since the "normal" hex tools cannot move these screws. Only special TORX® BO tools have a bore hole which can slip over the pin. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Handle markings for simplified finding and sorting of the tool. Includes a practical rack for tidy storage of the screwdrivers Screwdrivers for recessed TORX® screws with safety pin Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away The Wera Black Point tip offers an exact fit and optimum corrosion protection Application TORX® screws with safety pin (BO = with bore hole) Content 6-piece set and rack in display carton Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that "normal" TORX® tools cannot be used. This pin fits into the borehole of TORX® BO tools allowing safety screws to be unfastened. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 367/6 TORX® BO Kraftform Screwdriver set and rack, 6 pieces 6x 367 TORX® BO Screwdriver for tamper-proof TORX® screws: TX 10x80 mm, TX 15x80 mm, TX 20x100 mm, TX 25x100 mm, TX 30x115 mm, TX 40x130 mm kts: Kraftform screwdriver set in holder 6-piece kpn: 367/6 TORX BO kpn_dash: kpn_clear: 3676TORXBO bkpn: WERA 367/6 TORX BO bkpn_clear: WERA 3676TORXBO c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05138250001 sr_ns: WERA05138250001
r: 03176969 p: 14.71 pid: 31966 b: WERA q: 0 st: lt: 8 ean: 4013288217769 sr: WERA 05008873001 sr_no_br: 05008873001 sr_no_br_cl: 05008873001 sr_cl: WERA05008873001 sr_dash: sold: 706.08 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved No ESD No Quantity per set 6 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt Stubby Magazin 1 compact screwdriver with internal bit magazine 6-piece - 05008873001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Particularly small bitholding screwdriver with short bit mounting for hard to reach areas. Includes 6 bits, which are located in a magazine in the handle. With only 65mm total length, the Kraftform Kompakt Stubby is a real mini screwdriving workshop. The strong permanent magnet in the bit mounting ensures secure holding of the bit. The 2-component handle with the practical combination of hard and soft zones allows for a firm grip and precise working. Take it easy tool finder: With size stamping and colour coding by output to find the required bit easily. Short, compact Stubby shape for working in tight installation spaces, with 6 bits in the integrated magazine Ergonomic 2-component Kraftform handle for precise work 1/4" bit mounting with strong permanent magnet Captive and swivelling bit magazine for easy removal and safe storage of bits Take it easy tool finder: colour coding according to profile and size Application Suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and Wera connection series 1 Design Bit holder with strong permanent magnet; BiTorsion bits for long service life, tough, for universal use. Take it easy tool finder: Size stamping and tips with colour coding to find the required bit quickly. Handle Kraftform Stubby with anti-roll protection, multi-component, integrated magazine Features and benefits The handle can be opened and thus gives access to the six bits contained in the magazine. With its compact handle shape and the short blade, the Kraftform Stubbies are particularly suitable for working in confined screwdriving situations. The swivelling bit magazine allows for the bits to be removed easily in almost any situation and cannot be lost. The bits are safely stored. Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. With softer BiTorsion zone to prevent the bit tip from twisting at high loads. This significantly increases product life. Tough design for universal use. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The magnet ensures that the bit is securely seated in the holder. ds: dsc: Scope of delivery Kraftform Kompakt Stubby magazine 1, 6 pieces 2x 851/1 BTZ bits: PH 1x25 mm, PH 2x25 mm 3x 867/1 BTZ TORX® bits: TX 15x25 mm, TX 20x25 mm, TX 25x25 mm 1x 800/1 BTZ bits: 0.8 x 5.5 x 25 mm kts: compact screwdriver with internal bit magazine 6-piece kpn: Kraftform Kompakt Stubby Magazin 1 kpn_dash: kpn_clear: KraftformKompaktStubbyMagazin1 bkpn: WERA Kraftform Kompakt Stubby Magazin 1 bkpn_clear: WERA KraftformKompaktStubbyMagazin1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05008873001 sr_ns: WERA05008873001
r: 02833948 p: 43.966 pid: 41540 b: WERA q: 0 st: lt: 12 ean: 4013288094803 sr: WERA 05024410001 sr_no_br: 05024410001 sr_no_br_cl: 05024410001 sr_cl: WERA05024410001 sr_dash: sold: 703.456 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive type Torx VDE approved No With safety colour code 1000V No Supplied in Storage box Quantity per set 6 Product Range Wera Kraftform n: WERA 977/6 TORX Kraftform screwdriver set for screwing, chiselling and tightening in holder 6-piece - 05024410001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description Wera Chiseldriver set for fastening, chiselling and loosening seized recessed TORX® screws. Multi-component Kraftform handle for fast and low-fatigue working. A hexagon blade out of high quality bit material that extends right through the blade ensures full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Comes with an impact cap for durability and reduced risk of splintering. More torque can be transferred with the help of an open-end or ring spanner applied to the integrated hexagonal bolster. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Chiseldriver for fastening, chiselling and loosening For recessed TORX® screws Hexagonal blade extending through the handle Impact cap and bolster for the transfer of higher torque Storage rack for wall-mounting Application TORX® Content 6-piece set and rack in display carton Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Wera makes its Kraftform handles from several materials with different properties. The core is made from a hardwearing plastic that holds the blade securely even when subjected to great forces. The yellow soft zones of the external mantle consist of a softer material with more friction resistance for high torque transfer. The black areas with a harder surface prevent the hand from sticking to the handle enabling you to adjust your grip more quickly. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 977/6 TORX® Screwdriver set Kraftform Wera: Chiseldriver and rack, 6 pieces 6x 977 Screwdriver for TORX® screws: TX 15x80 mm, TX 20x90 mm, TX 25x100 mm, TX 27x125 mm, TX 30x150 mm, TX 40x150 mm kts: Kraftform screwdriver set for screwing, chiselling and tightening in holder 6-piece kpn: 977/6 TORX kpn_dash: kpn_clear: 9776TORX bkpn: WERA 977/6 TORX bkpn_clear: WERA 9776TORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05024410001 sr_ns: WERA05024410001
r: 41071266 p: 39.008 pid: 71861 b: WERA q: 0 st: lt: 15 ean: 4013288111739 sr: WERA 05032063001 sr_no_br: 05032063001 sr_no_br_cl: 05032063001 sr_cl: WERA05032063001 sr_dash: sold: 702.144 p_range: none type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Supplied in Storage box Quantity per set 6 n: WERA 3334/3350/3355/6 screwdriver set stainless steel in holder 6-piece - 05032063001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description High quality Kraftform Plus screwdriver set out of stainless steel. The stainless tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. They can be used for industrial application without hesitation. The Lasertip tip literally bites into the head of the screw and thereby prevents any slipping out of the screw head. Multi-component Kraftform handle for fast and low-fatigue working. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Includes a practical rack for tidy storage of the screwdrivers. Vacuum ice-hardened stainless screwdriver set Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Application Slotted, Phillips and Pozidriv screws Content 6-piece set with Take it easy tool finder: colour coding according to profile and size stamp and rack in display carton Features and benefits Screw stainless steel together with stainless steel! Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery 3334/3350/3355/6 Screwdriver set, stainless and rack, 6 pieces 2x 3350 PH Screwdriver for Phillips screws, stainless: PH 1x80 mm, PH 2x100 mm 2x 3355 PZ Screwdriver for Pozidriv screws, stainless: PZ 1x80 mm, PZ 2x100 mm 1x 3335 Screwdriver for slotted screws, stainless: 0.5 x 3 x 80 mm 1x 3334 Screwdriver for slotted screws, stainless: 1.2 x 6.5 x 150 mm kts: screwdriver set stainless steel in holder 6-piece kpn: 3334/3350/3355/6 kpn_dash: kpn_clear: 3334335033556 bkpn: WERA 3334/3350/3355/6 bkpn_clear: WERA 3334335033556 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set sr_no_br_cl_ns: 05032063001 sr_ns: WERA05032063001
r: 02813936 p: 18.842 pid: 17595 b: WERA q: 0 st: lt: 12 ean: 4013288157737 sr: WERA 05057692001 sr_no_br: 05057692001 sr_no_br_cl: 05057692001 sr_cl: WERA05057692001 sr_dash: sold: 697.154 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Pozidriv ESD No VDE approved No Quantity per set 6 Product Range Wera Bit-Check n: WERA Bit-Check 6 PZ Impaktor 1 screwdriver bit set 6-piece - 05057692001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description 6 Wera Impaktor bits tidily arranged in a minimum of space in a practical Bit-Check. The Impaktor technology offers an above-average service life even under extreme circumstances thanks to the best possible utilisation of the material properties and the optimised geometry. The bit tip is coated with tiny diamond particles; this reduces the risk of any slipping out of the screw head thanks to the enhanced frictional resistance. Upright positionable, multi-component Bit-Check Impaktor technology for above-average service life Particularly suitable for use with customary impact drivers Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out Take it easy tool finder: colour coding according to profile and size 6 Impaktor bits. The Take it easy Bit-Checks have bits with a sleeve which - from its colour and size designation - make it simple to access the right bit quickly. Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. For use with impact screwdrivers. Improve productivity when screwdriving with power tools. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. For an above-average service life. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Another product advantage is the coating of the Impaktor bits with minute diamond particles. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. Torsion zone specially designed to absorb such forces and thereby protect the bit tip. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. The combination of the double torsion zones in the Impaktor holder and the torsion zone in the Impaktor bit results in the so-called TriTorsion system. The Take it easy Bit-Checks have bits with a sleeve which - from its colour (e.g. red = Phillips) and size designation - make it simple to access the right bit quickly. ds: dsc: Scope of delivery Bit-Check 6 PZ Impaktor 1, 6 pieces 6x 855/4 IMP DC Impaktor bits: 4x PZ 2x50 mm, 2x PZ 3x50 mm kts: screwdriver bit set 6-piece kpn: Bit-Check 6 PZ Impaktor 1 kpn_dash: Bit kpn_clear: BitCheck6PZImpaktor1 bkpn: WERA Bit-Check 6 PZ Impaktor 1 bkpn_clear: WERA BitCheck6PZImpaktor1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05057692001 sr_ns: WERA05057692001
r: 03334694 p: 46.115 pid: 159672 b: WERA q: 4 st: 1 lt: 1 ean: 4013288229922 sr: WERA 05006607001 sr_no_br: 05006607001 sr_no_br_cl: 05006607001 sr_cl: WERA05006607001 sr_dash: sold: 691.725 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved Yes With safety colour code 1000V No ESD No Supplied in Case Quantity per set 16 Product Range Wera Kraftform Kompakt n: WERA 05006607001 Kraftform Kompakt VDE 16 Universal 1 Tool Finder, 16-piece cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description One 817 VDE Kraftform bitholding screwdriver, 14 VDE blades with Take it easy Tool finder: Colour coding by profile and laser-engraved size indication - for quick and easy identification of the required tool, one single-pole phase tester. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. In a robust belt pouch. The textile box features a fleece zone at the back. Using the provided self-adhesive hook and loop fastener strips, the textile box can be attached to the Wera 2go components. Or to the wall, shelf or workshop trolley. VDE-insulated Kraftform 817 VDE bladeholding screwdriver with anti-roll protection Hexagonal anti-roll feature against rolling away Individually tested tools as per IEC 60900 at 10,000 V In a robust folding pouch Compatible with Wera 2go 16-piece setOne Kraftform 817 VDE bitholding screwdriver solely for Wera VDE blades14 VDE blades (each 157 mm length) with Take it easy Tool finder with colour coding by profile and laser-engraved size indication, one single-pole phase testerIn a robust belt pouch Features and benefits Why is the right tool so often missing at the workplace? The reason: too many tools and overly-heavy tool bags can make it bothersome to carry keep them with you. So for us it was a clear challenge: to develop a tool that is suitable for a whole host of applications and can be easily taken along to the workplace. Our solution: Kraftform Kompakt tools. A handle into which blades with a range of different profiles can be inserted. Compactly and protectively housed in a light and robust textile pouch - and they are even VDE-tested, too. Each Kraftform Kompakt VDE set has been tested individually at 10,000 volts, in accordance with IEC 60900.This ten-times-higher testing load guarantees safe working at their maximum permitted load of 1,000 volts. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The Kraftform Kompakt VDE blades can be replaced simply by pulling down the yellow ring on the handle. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE 16 Universal 1 Tool finder, 16 pieces 1x 817 VDE Kraftform blade-holding handle: 9 x 98 mm 2x Kraftform Kompakt VDE 62 i Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 65 i Take it easy: PZ 1x157 mm, PZ 2x157 mm 2x Kraftform Kompakt VDE 65 i PZ/S Take it easy: # 1x157 mm, # 2x157 mm 4x Kraftform Kompakt VDE 67 i TORX® Take it easy: TX 10x157 mm, TX 15x157 mm, TX 20x157 mm, TX 25x157 mm 4x Kraftform Kompakt VDE 60 i Take it easy: 0.4x2.5x157 mm, 0.6x3.5x157 mm, 0.8x4x157 mm, 1x5.5x157 mm 1x 247 Single-pole phase tester: 0.5 x 3 x 70 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: Kraftform Kompakt VDE 16 Universal 1 Tool Finder, 16-piece kpn: 05006607001 kpn_dash: kpn_clear: 05006607001 bkpn: WERA 05006607001 bkpn_clear: WERA 05006607001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006607001 sr_ns: WERA05006607001
r: 03226508 p: 29.917 pid: 70166 b: WERA q: 0 st: lt: 7 ean: 4013288194794 sr: WERA 05030181001 sr_no_br: 05030181001 sr_no_br_cl: 05030181001 sr_cl: WERA05030181001 sr_dash: sold: 688.091 p_range: none type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 6 n: WERA 2050/6 Micro screwdriver set in holder 6-piece - 05030181001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description High quality Wera Micro screwdriver set for precision mechanical work. Rapid twisting is possible by fixing the hand on the twist cap and using the fast-turning zone just below it. This makes time-consuming grip adjustments unnecessary. Power zone with integrated soft zones ensure the transfer of higher tightening and loosening torque. Precision zone for the right angle for adjustment work. The Wera Black Point tip offers high corrosion protection and an exact fit. Includes practical rack for tidy storage of the screwdrivers. Kraftform Micro screwdriver for slotted, Phillips-Recess, IPR and Microstix® screws Multi-component Kraftform Micro handles for fast and ergonomic screwdriving Anti-roll feature and rotating cap for rapid twisting The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted, Phillips, TORX PLUS® IPR and Microstix® screws Content 6-piece set and rack in display carton Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2050/6 Screwdriver set and rack for electronic applications, 6 pieces 3x 2050 PH Screwdriver for Phillips screws for electronic applications: PH 000x40 mm, PH 00x40 mm, PH 0x40 mm 1x 2067 IPR TORX PLUS® Screwdriver for electronic applications: 1 IPR x 40 mm 1x 2072 Kraftform Micro screwdriver for Microstix® screws: m x 40 mm 1x 2035 Screwdriver for slotted screws for electronic applications: 0.35 x 2.5 x 40 mm kts: screwdriver set in holder 6-piece kpn: 2050/6 Micro kpn_dash: kpn_clear: 20506Micro bkpn: WERA 2050/6 Micro bkpn_clear: WERA 20506Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set sr_no_br_cl_ns: 05030181001 sr_ns: WERA05030181001
r: 02814910 p: 36.198 pid: 17202 b: WERA q: 1 st: 1 lt: 1 ean: 4013288179951 sr: WERA 05057450001 sr_no_br: 05057450001 sr_no_br_cl: 05057450001 sr_cl: WERA05057450001 sr_dash: sold: 687.762 p_range: none type: standard act: 1 avo: 1 av: Type of drive profile (bit) Mixed; Phillips; Pozidriv; Torx Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 43 n: WERA Bit-Safe 43 Universal 1 screwdriver bit set 43-piece - 05057450001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description 43-piece; robust textile box with bits for universal applications. 1 universal holder 899/4/1 with stainless sleeve, retaining ring and strong permanent magnet for insertion in the power screwdriver or for use in the chuck of the electric drill. The Bit-Safes in textile box convince due to their functionality in a minimum of space Bits with Torsion design (T) preventing premature wear Universal holder with stainless sleeve Tough viscous bits for universal use 1 universal bit holder with stainless steel sleeve, retaining ring, and strong permanent magnet, 42 bits, Torsion-style (T) design to reduce premature wear, tough (Z), for universal use. Features and benefits The new Bit-Safes provide users with comprehensive bit and holder ranges in a surface-protecting, compact textile box. TZ-Bits are tough viscous bits with a torsion zone. Torsion bits absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. The retaining ring and the strong permanent magnet ensure a particularly secure fitting of the bit in the holder. ds: dsc: Scope of delivery Bit-Safe 43 Universal 1, 43 pieces 1x 899/4/1 Universal Bit Holder: 1/4" x 50 mm 1x 851/1 Z bits: PH 2 x 25 mm 3x 851/4 TZ bits: PH 1x50 mm, 2x PH 2x50 mm 9x 855/1 Z bits: 2x PZ 1x25 mm, 5x PZ 2x25 mm, 2x PZ 3x25 mm 3x 855/4 TZ bits: PZ 1x50 mm, 2x PZ 2x50 mm 20x 867/1 TORX® bits: 3x TX 10x25 mm, 4x TX 15x25 mm, 4x TX 20x25 mm, 4x TX 25x25 mm, 4x TX 30x25 mm, TX 40x25 mm 6x 867/4 Z TORX® bits: TX 10x50 mm, TX 15x50 mm, TX 20x50 mm, TX 25x50 mm, TX 30x50 mm, TX 40x50 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: screwdriver bit set 43-piece kpn: Bit-Safe 43 Universal 1 kpn_dash: Bit kpn_clear: BitSafe43Universal1 bkpn: WERA Bit-Safe 43 Universal 1 bkpn_clear: WERA BitSafe43Universal1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set sr_no_br_cl_ns: 05057450001 sr_ns: WERA05057450001
r: 08107992 p: 137.52 pid: 159689 b: WERA q: 1 st: 1 lt: 1 ean: 4013288229915 sr: WERA 05006605001 sr_no_br: 05006605001 sr_no_br_cl: 05006605001 sr_cl: WERA05006605001 sr_dash: sold: 687.6 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved Yes ESD No Product Range Wera Kraftform Kompakt n: WERA 05006605001 Kraftform Kompakt VDE 15 Torque 1.2-3.0 Nm extra slim 1 Tool Finder, 15-piece cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description 15-piece torque VDE blade set. One torque VDE bladeholding screwdriver with adjustable torque value from 1.2-3.0 Nm. With ergonomic Kraftform Plus handle, with hard handle zones ensuring high working speeds while soft handle zones guarantee a high torque transfer. Includes 14 blades (12 of which with reduced blade diameter) with integrated protective insulation. With Take it easy Tool finder: Colour coding by profile and laser-engraved size indication - for quick and easy identification of the required tool. In a robust belt pouch. The textile box features a fleece zone at the back. Using the provided self-adhesive hook and loop fastener strips, the textile box can be attached to the Wera 2go components. Or to the wall, shelf or workshop trolley. Kraftform Kompakt VDE torque screwdriver set with adjustable torque Adjustable Kraftform VDE torque holder exclusively for Wera VDE interchangeable blades VDE blades (157 mm length) with practical spinning function, anti-roll protection and Take it easy tool finder: colour coding by profile and laser-engraved size indication Individually tested tools as per IEC 60900 In a robust folding pouch 15-piece setOne series 7400 VDE Kraftform adjustable torque bitholding screwdriver (1.2 - 3.0 Nm) solely for Wera VDE blades14 VDE blades (each 157 mm length) with Take it easy Tool finder with colour coding by profile and laser-engraved size indication; with reduced blade diameter (items Kraftform Kompakt 60 i Take it easy 0.4x2.5 and Kraftform Kompakt 67 i Take it easy TX 10 standard blade diameter) with integrated protective insulation, low-lying screw and spring elements can be easily reached and operatedIn a robust belt pouch Features and benefits Each Kraftform Kompakt VDE set has been tested individually at 10,000 volts, in accordance with IEC 60900.This ten-times-higher testing load guarantees safe working at their maximum permitted load of 1,000 volts. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Easy-to-read scale value. Measurement accuracy is ± 6 % in accordance with the standard EN ISO 6789. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. Simple setting of the required torque by hand. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. ds: dsc: Scope of delivery Kraftform Kompakt VDE 15 Torque 1.2-3.0 Nm extra slim 1 Tool Finder, 15 pieces 1x Series 7400 VDE Kraftform adjustable torque handle (0.3-3.5 Nm): 7441 VDE x 1.2-3.0 Nm 2x Kraftform Kompakt VDE 62 iS Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 65 iS Take it easy: PZ 1x157 mm, PZ 2x157 mm 2x Kraftform Kompakt VDE 65 iS PZ/S Take it easy: # 1x157 mm, # 2x157 mm 1x Kraftform Kompakt VDE 67 i TORX® Take it easy: TX 10 x 157 mm 3x Kraftform Kompakt VDE 67 iS TORX® Take it easy: TX 15x157 mm, TX 20x157 mm, TX 25x157 mm 1x Kraftform Kompakt VDE 60 i Take it easy: 0.4 x 2.5 x 157 mm 3x Kraftform Kompakt VDE 60 iS Take it easy: 0.6x3.5x157 mm, 0.8x4x157 mm, 1x5.5x157 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: Kraftform Kompakt VDE 15 Torque 1.2-3.0 Nm extra slim 1 Tool Finder, 15-piece kpn: 05006605001 kpn_dash: kpn_clear: 05006605001 bkpn: WERA 05006605001 bkpn_clear: WERA 05006605001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006605001 sr_ns: WERA05006605001
