r: 87992859 p: 8.4 pid: 71047 b: WERA q: 0 st: lt: 12 ean: 4013288016201 sr: WERA 05060115001 sr_no_br: 05060115001 sr_no_br_cl: 05060115001 sr_cl: WERA05060115001 sr_dash: sold: 25.2 p_range: none type: standard act: 1 avo: 1 av: Length 70 mm Drive profile size (bit) 25 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T25 n: WERA 867/4 Z TORX bit, TX 25 x 70 mm - 05060115001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for TORX® socket screws. Tough, for universal use. 1/4" hexagonal, suitable for bitholding screwdrivers as per DIN ISO 1173-F 6.3. For recessed TORX® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 Z TORX® bits, TX 25 x 70 mm kts: bit, TX 25 x 70 mm kpn: 867/4 Z TORX kpn_dash: kpn_clear: 8674ZTORX bkpn: WERA 867/4 Z TORX bkpn_clear: WERA 8674ZTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05060115001 sr_ns: WERA05060115001
r: 08103735 p: 25.123 pid: 72187 b: WERA q: 0 st: lt: 9 ean: 4013288226594 sr: WERA 05051512001 sr_no_br: 05051512001 sr_no_br_cl: 05051512001 sr_cl: WERA05051512001 sr_dash: sold: 25.123 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Bit holder type Internal hexagon Type of drive profile (bit) Mixed VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 7 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 27 Imperial Set 1 bit handle with bit magazine 7-piece - 05051512001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Wera compact tool with multi-component Kraftform handle for high working speeds and particularly ergonomic screwdriving. Bit magazine integrated in the handle, 6 tough bits for universal use. Bit holder with strong permanent magnet for secure seating of the bit. Bitholding handle with bit magazine Bit holder with strong permanent magnet which holds bits firmly Magazine integrated in the handle for bit storage With 6 bits in the magazine: cross recess Phillips, slotted and square head (Robertson); tough Application Suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and Wera connection series 1 Design Hexagonal blade, nicromatt, stainless steel bit holder, with strong permanent magnet; 6 bits, tough, for universal use. Handle Kraftform with anti-roll protection, multi-component, integrated magazine with 6 bits Features and benefits The handle can be opened via an operating button. A magazine for 6 bits is integrated in the handle. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. With stainless steel sleeve and strong permanent magnet. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery Kraftform Kompakt 27 Imperial Set 1, 7 pieces 1x 828/1 Bitholding screwdriver, with strong permanent magnet; magazine for 6 bits in the handle: 1/4" 2x 851/1 Z bits: PH 1x25 mm, PH 2x25 mm 2x 800/1 Z bits: 1x5.5x25 mm, 1.2x6.5x25 mm 2x 868/1 Z Square-Plus bits: # 1x25 mm, # 2x25 mm kts: bit handle with bit magazine 7-piece kpn: Kraftform Kompakt 27 Imperial Set 1 kpn_dash: kpn_clear: KraftformKompakt27ImperialSet1 bkpn: WERA Kraftform Kompakt 27 Imperial Set 1 bkpn_clear: WERA KraftformKompakt27ImperialSet1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05051512001 sr_ns: WERA05051512001
r: 02317705 p: 2.49 pid: 45791 b: WERA q: 36 st: 1 lt: 1 ean: 4013288040992 sr: WERA 05480172001 sr_no_br: 05480172001 sr_no_br_cl: 05480172001 sr_cl: WERA05480172001 sr_dash: sold: 24.9 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 n: WERA 851/1 TiN PH bit Phillips, PH 2 x 25 mm - 05480172001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for Phillips screws. Extra-hard titanium nitride (TiN) coating for withstanding permanent loads such as e.g. in industrial applications. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For Phillips screws Extremely hard titanium nitride coating (TiN) for permanent loads Particularly suitable for industrial applications 1/4" hexagon drive (Wera connecting series 1) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design TiN coating for the hardness needed e.g. in series screwdriving operations Features and benefits TiN stands for titanium-nitrite. An extremely hard coating to withstand permanent loads such as during continual screwdriving operations in series manufacturing. ds: dsc: Scope of delivery 851/1 TiN bits, PH 2 x 25 mm kts: bit Phillips, PH 2 x 25 mm kpn: 851/1 TiN PH kpn_dash: kpn_clear: 8511TiNPH bkpn: WERA 851/1 TiN PH bkpn_clear: WERA 8511TiNPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05480172001 sr_ns: WERA05480172001
r: 87010164 p: 3.55 pid: 72185 b: WERA q: 10 st: 1 lt: 1 ean: 4013288014559 sr: WERA 05056820001 sr_no_br: 05056820001 sr_no_br_cl: 05056820001 sr_cl: WERA05056820001 sr_dash: sold: 24.85 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ2 n: WERA 855/1 Z PZ bit Pozidriv, PZ 2 x 50 mm - 05056820001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for Pozidriv screws. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. Suitable for Pozidriv screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 855/1 Z bits, PZ 2 x 50 mm kts: bit Pozidriv, PZ 2 x 50 mm kpn: 855/1 Z PZ kpn_dash: kpn_clear: 8551ZPZ bkpn: WERA 855/1 Z PZ bkpn_clear: WERA 8551ZPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056820001 sr_ns: WERA05056820001
r: 03229276 p: 8.223 pid: 70492 b: WERA q: 0 st: lt: 12 ean: 4013288213914 sr: WERA 05136313001 sr_no_br: 05136313001 sr_no_br_cl: 05136313001 sr_cl: WERA05136313001 sr_dash: sold: 24.669 p_range: none type: standard act: 1 avo: 1 av: Length 152 mm Drive profile size (bit) 20 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T20 n: WERA 867/4 Z SB bit, TX 20 x 152 mm - 05136313001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bit for TORX® socket screws. Tough, for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For recessed TORX® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 Z SB TORX® Bits, TX 20 x 152 mm kts: bit, TX 20 x 152 mm kpn: 867/4 Z SB kpn_dash: kpn_clear: 8674ZSB bkpn: WERA 867/4 Z SB bkpn_clear: WERA 8674ZSB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05136313001 sr_ns: WERA05136313001
r: 41071128 p: 12.33 pid: 17374 b: WERA q: 0 st: lt: 13 ean: 4013288000538 sr: WERA 05002933001 sr_no_br: 05002933001 sr_no_br_cl: 05002933001 sr_cl: WERA05002933001 sr_dash: sold: 24.66 p_range: none type: standard act: 1 avo: 1 av: Length 175 mm Connection size (bit) 6 mm Drive profile size 1 (bit) 2 Bit tip 1 PH2 Connection profile (bit) Hexagonal Bit tip 2 PZ2 Blade thickness 2 Blade thickness 1 Type of drive profile 2 (bit) Pozidriv Type of drive profile 1 (bit) Phillips Drive profile size 2 (bit) 2 n: WERA 83 combination blade, PH 2 x PZ 2 x 175 mm - 05002933001 cn: DOUBLE-ENDED BIT cn2: DOUBLE-ENDED BIT cn_clear: DOUBLEENDEDBIT d: Product description Combination blade for Vario handles. The double-ended blades are made out of high quality bit material and are therefore particularly durable. The Wera Black Point tip offers a perfect fit and optimised corrosion protection. Combination blade cross-recess Phillips/cross-recess Pozidriv for Vario handle Chrome-plated hexagonal material, 6 mm Black Point tip offers a perfect fit with optimised corrosion protection 2 different drives on one blade Application Phillips screws and Pozidriv screws Blade 6 mm hexagon Design Chrome-plated, Black Point Features and benefits The 6 mm double-ended blades of 175 mm length are out of high quality bit material which gives them a particularly long service life. ds: dsc: Scope of delivery 83 Combination blade for Phillips/Pozidriv screws, PH 2 x PZ 2 x 175 mm kts: combination blade, PH 2 x PZ 2 x 175 mm kpn: 83 kpn_dash: kpn_clear: 83 bkpn: WERA 83 bkpn_clear: WERA 83 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Double-ended bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera double-ended bit sr_no_br_cl_ns: 05002933001 sr_ns: WERA05002933001
r: 02815577 p: 12.33 pid: 17218 b: WERA q: 0 st: lt: 12 ean: 4013288155436 sr: WERA 05002948001 sr_no_br: 05002948001 sr_no_br_cl: 05002948001 sr_cl: WERA05002948001 sr_dash: sold: 24.66 p_range: none type: standard act: 1 avo: 1 av: Length 175 mm Connection size (bit) 6 mm Drive profile size 1 (bit) 4 mm Bit tip 1 HEX 4 mm Connection profile (bit) Hexagonal Bit tip 2 HEX 5 mm Blade thickness 2 Blade thickness 1 Type of drive profile 2 (bit) Hex Type of drive profile 1 (bit) Hex ball end Drive profile size 2 (bit) 5 mm n: WERA 84 combikling, 4 x 5 x 175 mm - 05002948001 cn: DOUBLE-ENDED BIT cn2: DOUBLE-ENDED BIT cn_clear: DOUBLEENDEDBIT d: Product description Combination blade for Vario handles. The double-ended blades are made out of high quality bit material and are therefore particularly durable. The Wera Black Point tip offers a perfect fit and optimised corrosion protection. Combination blade hex ball point/hex for Vario handle Chrome-plated hexagonal material, 6 mm Black Point tip offers a perfect fit with optimised corrosion protection 2 drives on one blade Application Hexagon socket screws Blade 6 mm hexagon Design Chrome-plated, Black Point Features and benefits The 6 mm double-ended blades of 175 mm length are out of high quality bit material which gives them a particularly long service life. ds: dsc: Scope of delivery 84 Combination blade for hexagon socket screws, 4 x 5 x 175 mm kts: combikling, 4 x 5 x 175 mm kpn: 84 kpn_dash: kpn_clear: 84 bkpn: WERA 84 bkpn_clear: WERA 84 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Double-ended bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera double-ended bit sr_no_br_cl_ns: 05002948001 sr_ns: WERA05002948001
r: 41071126 p: 12.33 pid: 19051 b: WERA q: 0 st: lt: 13 ean: 4013288000514 sr: WERA 05002926001 sr_no_br: 05002926001 sr_no_br_cl: 05002926001 sr_cl: WERA05002926001 sr_dash: sold: 24.66 p_range: none type: standard act: 1 avo: 1 av: Length 175 mm Drive profile size 2 (bit) 1 Type of drive profile 1 (bit) Slotted Type of drive profile 2 (bit) Phillips Blade thickness 1 0,6 mm Blade thickness 2 Connection size (bit) 6 mm Connection profile (bit) Hexagonal Bit tip 1 Slotted 4 mm Bit tip 2 PH1 Drive profile size 1 (bit) 7 mm n: WERA 82 combination blade, PH 3 x 1.2 x 7 x 175 mm - 05002926001 cn: DOUBLE-ENDED BIT cn2: DOUBLE-ENDED BIT cn_clear: DOUBLEENDEDBIT d: Product description Combination blade for Vario handles. The double-ended blades are made out of high quality bit material and are therefore particularly durable. The Wera Black Point tip offers a perfect fit and optimised corrosion protection. Combination blade cross-recess Phillips/slotted for Vario handle Chrome-plated hexagonal material, 6 mm Black Point tip offers a perfect fit with optimised corrosion protection 2 different drives on one blade Application Slotted screws and Phillips screws Blade 6 mm hexagon Design Chrome-plated, Black Point Features and benefits The 6 mm double-ended blades of 175 mm length are out of high quality bit material which gives them a particularly long service life. ds: dsc: Scope of delivery 82 Combination blade for slotted/Phillips screws, PH 3 x 1.2 x 7 x 175 mm kts: combination blade, PH 3 x 1.2 x 7 x 175 mm kpn: 82 kpn_dash: kpn_clear: 82 bkpn: WERA 82 bkpn_clear: WERA 82 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Double-ended bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera double-ended bit sr_no_br_cl_ns: 05002926001 sr_ns: WERA05002926001
r: 41071134 p: 12.33 pid: 19338 b: WERA q: 0 st: lt: 13 ean: 4013288000590 sr: WERA 05002950001 sr_no_br: 05002950001 sr_no_br_cl: 05002950001 sr_cl: WERA05002950001 sr_dash: sold: 24.66 p_range: none type: standard act: 1 avo: 1 av: Length 175 mm Connection size (bit) 6 mm Drive profile size 1 (bit) 1 Bit tip 1 PH1 Connection profile (bit) Hexagonal Bit tip 2 PH2 Blade thickness 2 Blade thickness 1 Type of drive profile 2 (bit) Phillips Type of drive profile 1 (bit) Phillips Drive profile size 2 (bit) 2 n: WERA 85 combination blade, PH 1 x PH 2 x 175 mm - 05002950001 cn: DOUBLE-ENDED BIT cn2: DOUBLE-ENDED BIT cn_clear: DOUBLEENDEDBIT d: Product description Combination blade for Vario handles. The double-ended blades are made out of high quality bit material and are therefore particularly durable. The Wera Black Point tip offers a perfect fit and optimised corrosion protection. Combination blade cross-recess Phillips/cross-recess Phillips for Vario handle Chrome-plated hexagonal material, 6 mm Black Point tip offers a perfect fit with optimised corrosion protection 2 different drive sizes on one blade Application Phillips screws Blade 6 mm hexagon Design Chrome-plated, Black Point Features and benefits The 6 mm double-ended blades of 175 mm length are out of high quality bit material which gives them a particularly long service life. ds: dsc: Scope of delivery 85 Combination blade for Phillips screws, PH 1 x PH 2 x 175 mm kts: combination blade, PH 1 x PH 2 x 175 mm kpn: 85 kpn_dash: kpn_clear: 85 bkpn: WERA 85 bkpn_clear: WERA 85 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Double-ended bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera double-ended bit sr_no_br_cl_ns: 05002950001 sr_ns: WERA05002950001
r: 41071127 p: 12.33 pid: 17379 b: WERA q: 0 st: lt: 12 ean: 4013288000521 sr: WERA 05002930001 sr_no_br: 05002930001 sr_no_br_cl: 05002930001 sr_cl: WERA05002930001 sr_dash: sold: 24.66 p_range: none type: standard act: 1 avo: 1 av: Length 175 mm Connection size (bit) 6 mm Drive profile size 1 (bit) 1 Bit tip 1 PH1 Connection profile (bit) Hexagonal Bit tip 2 PZ1 Blade thickness 2 Blade thickness 1 Type of drive profile 2 (bit) Pozidriv Type of drive profile 1 (bit) Phillips Drive profile size 2 (bit) 1 n: WERA 83 combination blade, PH 1 x PZ 1 x 175 mm - 05002930001 cn: DOUBLE-ENDED BIT cn2: DOUBLE-ENDED BIT cn_clear: DOUBLEENDEDBIT d: Product description Combination blade for Vario handles. The double-ended blades are made out of high quality bit material and are therefore particularly durable. The Wera Black Point tip offers a perfect fit and optimised corrosion protection. Combination blade cross-recess Phillips/cross-recess Pozidriv for Vario handle Chrome-plated hexagonal material, 6 mm Black Point tip offers a perfect fit with optimised corrosion protection 2 different drives on one blade Application Phillips screws and Pozidriv screws Blade 6 mm hexagon Design Chrome-plated, Black Point Features and benefits The 6 mm double-ended blades of 175 mm length are out of high quality bit material which gives them a particularly long service life. ds: dsc: Scope of delivery 83 Combination blade for Phillips/Pozidriv screws, PH 1 x PZ 1 x 175 mm kts: combination blade, PH 1 x PZ 1 x 175 mm kpn: 83 kpn_dash: kpn_clear: 83 bkpn: WERA 83 bkpn_clear: WERA 83 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Double-ended bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera double-ended bit sr_no_br_cl_ns: 05002930001 sr_ns: WERA05002930001
r: 02953438 p: 12.25 pid: 33623 b: WERA q: 29 st: 1 lt: 1 ean: 4013288204318 sr: WERA 05134860001 sr_no_br: 05134860001 sr_no_br_cl: 05134860001 sr_cl: WERA05134860001 sr_dash: sold: 24.5 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 30 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T30 n: WERA 3867/4 TORX bit, stainless steel, TX 30 x 89 mm - 05134860001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits out of stainless steel for recessed TORX® screws. Wera stainless are made out of stainless steel which prevents the formation of unsightly extraneous rust. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For recessed TORX® screws Stainless Steel Bits Solution to the extraneous rust problem: fasten stainless screws with stainless tools Vacuum ice-hardened 1/4" hexagon drive (Wera connecting series 4) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Stainless steel for minimising rust. Take it easy tool finder: Output colour coding (green = TORX®) and large stamp to enable the desired bit to be easily located. Features and benefits Wera stainless steel bits are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel bits from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 3867/4 TORX®, stainless, TX 30 x 89 mm kts: bit, stainless steel, TX 30 x 89 mm kpn: 3867/4 TORX kpn_dash: kpn_clear: 38674TORX bkpn: WERA 3867/4 TORX bkpn_clear: WERA 38674TORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05134860001 sr_ns: WERA05134860001
r: 02818542 p: 6.12 pid: 45133 b: WERA q: 0 st: lt: 12 ean: 4013288034328 sr: WERA 05059544001 sr_no_br: 05059544001 sr_no_br_cl: 05059544001 sr_cl: WERA05059544001 sr_dash: sold: 24.48 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 3 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH3 n: WERA 851/4 BTH PH bit Phillips, PH 3 x 50 mm - 05059544001 cn: BIT cn2: BIT cn_clear: BIT d: Product description BiTorsion bits for Phillips screws with Torsion zone where kinetic energy is diverted from peak loads. This greatly extends the product service life; 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For Phillips screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Particularly hard for semi-hard materials 1/4" hexagon drive (Wera connecting series 4) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design BiTorsion for long service life, extra-hard. Take it easy tool finder: Output colour coding (red = Phillips) and large stamp to enable the desired bit to be easily located. Features and benefits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. The BiTorsion holder and the BiTorsion bit can, of course, be used independently of one another. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 851/4 BTH bits, PH 3 x 50 mm kts: bit Phillips, PH 3 x 50 mm kpn: 851/4 BTH PH kpn_dash: kpn_clear: 8514BTHPH bkpn: WERA 851/4 BTH PH bkpn_clear: WERA 8514BTHPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059544001 sr_ns: WERA05059544001
r: 02818546 p: 6.12 pid: 45017 b: WERA q: 0 st: lt: 12 ean: 4013288034588 sr: WERA 05059552001 sr_no_br: 05059552001 sr_no_br_cl: 05059552001 sr_cl: WERA05059552001 sr_dash: sold: 24.48 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 n: WERA 851/4 BTZ PH bit Phillips, PH 2 x 50 mm - 05059552001 cn: BIT cn2: BIT cn_clear: BIT d: Product description BiTorsion bits for Phillips screws with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Tough, for universal use. 1/4" hexagonal, suitable for bitholding screwdrivers as per DIN ISO 1173-F 6.3. For Phillips screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design BiTorsion for long service life, extra-tough, for universal use. Take it easy tool finder: Output colour coding (red = Phillips) and large stamp to enable the desired bit to be easily located. Features and benefits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. The BiTorsion holder and the BiTorsion bit can, of course, be used independently of one another. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 851/4 BTZ bits, PH 2 x 50 mm kts: bit Phillips, PH 2 x 50 mm kpn: 851/4 BTZ PH kpn_dash: kpn_clear: 8514BTZPH bkpn: WERA 851/4 BTZ PH bkpn_clear: WERA 8514BTZPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059552001 sr_ns: WERA05059552001
r: 02818543 p: 6.12 pid: 45137 b: WERA q: 0 st: lt: 12 ean: 4013288034571 sr: WERA 05059550001 sr_no_br: 05059550001 sr_no_br_cl: 05059550001 sr_cl: WERA05059550001 sr_dash: sold: 24.48 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH1 n: WERA 851/4 BTZ PH bit Phillips, PH 1 x 50 mm - 05059550001 cn: BIT cn2: BIT cn_clear: BIT d: Product description BiTorsion bits for Phillips screws with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Tough, for universal use. 1/4" hexagonal, suitable for bitholding screwdrivers as per DIN ISO 1173-F 6.3. For Phillips screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design BiTorsion for long service life, extra-tough, for universal use. Take it easy tool finder: Output colour coding (red = Phillips) and large stamp to enable the desired bit to be easily located. Features and benefits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. The BiTorsion holder and the BiTorsion bit can, of course, be used independently of one another. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 851/4 BTZ bits, PH 1 x 50 mm kts: bit Phillips, PH 1 x 50 mm kpn: 851/4 BTZ PH kpn_dash: kpn_clear: 8514BTZPH bkpn: WERA 851/4 BTZ PH bkpn_clear: WERA 8514BTZPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059550001 sr_ns: WERA05059550001
r: 02823065 p: 6.12 pid: 46812 b: WERA q: 0 st: lt: 16 ean: 4013288034601 sr: WERA 05059920001 sr_no_br: 05059920001 sr_no_br_cl: 05059920001 sr_cl: WERA05059920001 sr_dash: sold: 24.48 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ1 n: WERA 855/4 BTZ PZ bit Pozidriv, PZ 1 x 50 mm - 05059920001 cn: BIT cn2: BIT cn_clear: BIT d: Product description BiTorsion bits for Pozidriv* screws with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-F 6.3. Suitable for Pozidriv screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design BiTorsion for long service life, extra-tough, for universal use. Take it easy tool finder: Output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located. Features and benefits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. The BiTorsion holder and the BiTorsion bit can, of course, be used independently of one another. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 855/4 BTZ bits, PZ 1 x 50 mm kts: bit Pozidriv, PZ 1 x 50 mm kpn: 855/4 BTZ PZ kpn_dash: kpn_clear: 8554BTZPZ bkpn: WERA 855/4 BTZ PZ bkpn_clear: WERA 8554BTZPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059920001 sr_ns: WERA05059920001
r: 02832528 p: 12.231 pid: 42957 b: WERA q: 0 st: lt: 9 ean: 4013288181619 sr: WERA 05100087001 sr_no_br: 05100087001 sr_no_br_cl: 05100087001 sr_cl: WERA05100087001 sr_dash: sold: 24.462 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 9 mm Drive type Slotted Blade length 150 mm Blade thickness 1,6 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V n: WERA 932 A SB saw-cut screwdriver, 1.6 x 9 x 150 mm - 05100087001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera chiseldriver for screwdriving, chiseling, mortising and slackening stuck screws. With multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The pound-thru hexagonal blade made of premium bit material ensures power transmission without loss even at hammer blows. Tough tempered material to prevent the blade from splintering or breaking. With integrated impact cap to increase service life and reduce risk of splintering. Higher torques can be transmitted with open-end or ring spanners using the integrated hexagon bolster. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. With hexagon anti-roll protection to avoid bits from rolling away annoyingly in the workplace. Chiseldriver for fastening, chiselling and loosening Smooth hard zones for high speed turning, soft grip zones for high torque transfer Multi-component Kraftform handle for fast and ergonomic screwdriving Hexagonal blade extending through the handle, impact cap with integrated square and bolster The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Slotted screws Blade Hexagonal throughout with impact cap, hexagonal bolster from 0.8 x 4.5 Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, sizes 2.0 x 12.0, 2.5 x 14.0: Kraftform with non-roll feature, single-component Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 932 A SB Screwdriver for slotted screws, 1.6 x 9 x 150 mm kts: saw-cut screwdriver, 1.6 x 9 x 150 mm kpn: 932 A SB kpn_dash: kpn_clear: 932ASB bkpn: WERA 932 A SB bkpn_clear: WERA 932ASB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05100087001 sr_ns: WERA05100087001
r: 87010189 p: 12.2 pid: 70979 b: WERA q: 0 st: lt: 13 ean: 4013288011299 sr: WERA 05057235001 sr_no_br: 05057235001 sr_no_br_cl: 05057235001 sr_cl: WERA05057235001 sr_dash: sold: 24.4 p_range: none type: standard act: 1 avo: 1 av: Length 41 mm Blade thickness 1,6 mm Type of drive profile (bit) Slotted Connection size (bit) 5/16" VDE approved No Bit tip Slotted 10 mm Drive profile size (bit) 10 mm n: WERA 800/2 Z slotted screw bit, 1.6 x 10 x 41 mm - 05057235001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough viscous bits for slotted screws for universal use. 5/16" hexagon, suitable for holders as per DIN ISO 1173-D 8. For slotted screws Tough for hard materials 5/16" hexagon drive (Wera connecting series 2) Application Slotted screws Drive 5/16" hexagon, suitable for DIN ISO 1173-D 8 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 800/2 Z bits, 1.6 x 10 x 41 mm kts: slotted screw bit, 1.6 x 10 x 41 mm kpn: 800/2 Z kpn_dash: kpn_clear: 8002Z bkpn: WERA 800/2 Z bkpn_clear: WERA 8002Z c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05057235001 sr_ns: WERA05057235001
r: 03336537 p: 12.18 pid: 159564 b: WERA q: 0 st: lt: 9 ean: 4013288228475 sr: WERA 05006505001 sr_no_br: 05006505001 sr_no_br_cl: 05006505001 sr_cl: WERA05006505001 sr_dash: sold: 24.36 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness 1,2 mm Type of drive profile (bit) Slotted Connection size (bit) 9 mm Connection profile (bit) Hexagonal VDE approved Yes Bit tip Slotted 6,5 mm Drive profile size (bit) 6,5 mm Product Range Wera Kraftform Kompakt n: WERA 05006505001 Kraftform Kompakt VDE insert for slotted screws 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE blade for the Kraftform Kompakt handle/interchangeable blade system for lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. With anti-roll protection and Take it easy tool finder: colour coding by profile and laser-engraved size indication. Kraftform Kompakt VDE interchangeable blades for slotted screws Insulated, individually tested as per IEC 60900 9 mm hex drive with with entry chamfer Conical blade The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Slotted screws Blade Insulated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Conical cutting edge, burnished, Black Point tip, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Testing the tool for dielectric strength at 10,000 volt gives the user the peace of mind that their tool has been tested for its most important property, insulation. Wera VDE tools are subjected to this test piece by piece which guarantees safe working at up to 1,000 volt. The 157 mm length blades are suitable for Wera Kraftform bitholding screwdrivers 7400 VDE, 837 i RA, 827 T i and 817 VDE. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE 60 i Take it easy, 1.2 x 6.5 x 157 mm kts: Kraftform Kompakt VDE insert for slotted screws 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006505001 kpn_dash: kpn_clear: 05006505001 bkpn: WERA 05006505001 bkpn_clear: WERA 05006505001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006505001 sr_ns: WERA05006505001
r: 41071162 p: 8.099 pid: 72571 b: WERA q: 0 st: lt: 11 ean: 4013288036476 sr: WERA 05006179001 sr_no_br: 05006179001 sr_no_br_cl: 05006179001 sr_cl: WERA05006179001 sr_dash: sold: 24.297 p_range: none type: standard act: 1 avo: 1 av: Drive size T40 Blade length 150 mm Blade thickness ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Torx n: WERA 167 i TORX VDE 167 i VDE insulated screwdriver Torx TX 40 x 150 mm - 05006179001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera VDE screwdriver with multi-component Kraftform Plus handle for fast and smooth work: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Zinc phosphate plated Application TORX® socket screws Blade Insulated, individually tested as per IEC 60900 Design Zinc-phosphated Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (green = TORX®) and size stamp. Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces - resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 167 i VDE Insulated screwdriver for TORX® screws, TX 40 x 150 mm kts: 167 i VDE insulated screwdriver Torx TX 40 x 150 mm kpn: 167 i TORX VDE kpn_dash: kpn_clear: 167iTORXVDE bkpn: WERA 167 i TORX VDE bkpn_clear: WERA 167iTORXVDE c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05006179001 sr_ns: WERA05006179001
r: 02827186 p: 8.099 pid: 44633 b: WERA q: 0 st: lt: 12 ean: 4013288094643 sr: WERA 05060057001 sr_no_br: 05060057001 sr_no_br_cl: 05060057001 sr_cl: WERA05060057001 sr_dash: sold: 24.297 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 27 Blade thickness Type of drive profile (bit) Torx Tamper Resistant Connection size (bit) 1/4" VDE approved No Bit tip TT27 n: WERA 867/4 Z TORX BO bit with bore, TX 27 x 89 mm - 05060057001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for TORX® BO socket screws. TORX® BO screws have a protruding pin in their drive profile. This prevents unauthorized loosening, as these screws cannot be operated with "normal" TORX® tools. Only special TORX® BO tools have a bore which can mount the pin. Tough, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For recessed TORX® screws with securing pin TORX® bit with bore hole on the output side Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX® socket screws with safety pin (BO = with bore hole) Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design TORX® with bore hole, tough, for universal use Features and benefits TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that "normal" TORX® tools cannot be used. This pin fits into the borehole of TORX® BO tools allowing safety screws to be unfastened. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 Z TORX® BO bits with bore hole, TX 27 x 89 mm kts: bit with bore, TX 27 x 89 mm kpn: 867/4 Z TORX BO kpn_dash: kpn_clear: 8674ZTORXBO bkpn: WERA 867/4 Z TORX BO bkpn_clear: WERA 8674ZTORXBO c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05060057001 sr_ns: WERA05060057001
