r: 02307165 p: 6.446 pid: 44495 b: WERA q: 2 st: 1 lt: 1 ean: 4013288100726 sr: WERA 05028053001 sr_no_br: 05028053001 sr_no_br_cl: 05028053001 sr_cl: WERA05028053001 sr_dash: sold: 45.122 p_range: none type: standard act: 1 avo: 1 av: Drive size T25 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx n: WERA 367 TORX HF screwdriver with holding function, TX 25 x 100 mm - 05028053001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. With holding function: The clamping force resulting from the seating stress between the tip and the screw profile keeps the screws securely on the tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Handles marked for easy identification and sorting of tools. Screwdriver for recessed TORX® screws Holding function for TORX® screws Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Application TORX® socket screws Blade Round Design Holding function for TORX® screws made according to Acument Intellectual Properties specifications, chrome-plated Handle Kraftform with non-roll feature, multi-component Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. ds: dsc: Scope of delivery 367 TORX® HF Screwdriver with holding function for TORX® screws, TX 25 x 100 mm kts: screwdriver with holding function, TX 25 x 100 mm kpn: 367 TORX HF kpn_dash: kpn_clear: 367TORXHF bkpn: WERA 367 TORX HF bkpn_clear: WERA 367TORXHF c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05028053001 sr_ns: WERA05028053001
r: 41071190 p: 11.28 pid: 70697 b: WERA q: 0 st: lt: 11 ean: 4013288108043 sr: WERA 05007671001 sr_no_br: 05007671001 sr_no_br_cl: 05007671001 sr_cl: WERA05007671001 sr_dash: sold: 45.12 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 4 mm Blade length 90 mm Blade thickness 0,8 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 334 SK saw blade screwdriver, hexagonal key blade, 0.8 x 4 x 90 mm - 05007671001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver with hexagonal blade. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer for fast and low-fatigue working. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdriver for slotted screws Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal blade Lasertip tips for more secure fit in the screw head Application Slotted screws Blade Hexagonal with bolster from 0.8 x 4.5 Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Hexagonal blade and bolster for higher torque transfer. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery 334 SK Screwdriver for slotted screws, 0.8 x 4 x 90 mm kts: saw blade screwdriver, hexagonal key blade, 0.8 x 4 x 90 mm kpn: 334 SK kpn_dash: kpn_clear: 334SK bkpn: WERA 334 SK bkpn_clear: WERA 334SK c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05007671001 sr_ns: WERA05007671001
r: 87010122 p: 4.09 pid: 72847 b: WERA q: 8 st: 1 lt: 1 ean: 4013288015082 sr: WERA 05060065001 sr_no_br: 05060065001 sr_no_br_cl: 05060065001 sr_cl: WERA05060065001 sr_dash: sold: 44.99 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 3 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ3 n: WERA 855/4 TH PZ bit Pozidriv, PZ 3 x 50 mm - 05060065001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits with Torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. Extra-hard; 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Suitable for Pozidriv screws Torsion design against premature wear Particularly hard for semi-hard materials 1/4" hexagon drive (Wera connecting series 4) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Torsion-style design to reduce premature wear, extra-hard Features and benefits TH-Bits are hard bits with a torsion zone. Torsion bits absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. ds: dsc: Scope of delivery 855/4 TH bits, PZ 3 x 50 mm kts: bit Pozidriv, PZ 3 x 50 mm kpn: 855/4 TH PZ kpn_dash: kpn_clear: 8554THPZ bkpn: WERA 855/4 TH PZ bkpn_clear: WERA 8554THPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05060065001 sr_ns: WERA05060065001
r: 02827828 p: 4.46 pid: 44650 b: WERA q: 0 st: lt: 12 ean: 4013288113603 sr: WERA 05066394001 sr_no_br: 05066394001 sr_no_br_cl: 05066394001 sr_cl: WERA05066394001 sr_dash: sold: 44.6 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Square Connection size (bit) 1/4" VDE approved No Bit tip # 2 n: WERA 868/1 V inside square bit, 2 x 25 mm - 05066394001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for square socket screws with holding function. The wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screw on the tool. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Suitable for square head socket screws V bits for square recess screws Tough for hard materials 1/4" hexagon drive Application Square socket head screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use, with holding function Features and benefits V bits have a conical profile. The clamping forces thus resulting hold Robertson screws securely on the tip of the tool. Ideal for screwdriving at difficult-to-access places. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 868/1 V Square-Plus bits, # 2 x 25 mm kts: inside square bit, # 2 x 25 mm kpn: 868/1 V kpn_dash: kpn_clear: 8681V bkpn: WERA 868/1 V bkpn_clear: WERA 8681V c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066394001 sr_ns: WERA05066394001
r: 87010028 p: 2.62 pid: 72087 b: WERA q: 14 st: 1 lt: 1 ean: 4013288011169 sr: WERA 05056220001 sr_no_br: 05056220001 sr_no_br_cl: 05056220001 sr_cl: WERA05056220001 sr_dash: sold: 44.54 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Blade thickness 0,8 mm Type of drive profile (bit) Slotted Connection size (bit) 1/4" VDE approved No Bit tip Slotted 5,5 mm Drive profile size (bit) 5,5 mm n: WERA 800/1 TZ slotted screw bit, 0.8 x 5.5 x 25 mm - 05056220001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Bits for slotted screws with torsion zone against premature wear. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For slotted screws Torsion design against premature wear Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Slotted screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Torsion-style design to reduce premature wear, tough, for universal use Features and benefits TZ-Bits are tough bits with a torsion zone. Torsion bits absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 800/1 TZ bits, 0.8 x 5.5 x 25 mm kts: slotted screw bit, 0.8 x 5.5 x 25 mm kpn: 800/1 TZ kpn_dash: kpn_clear: 8001TZ bkpn: WERA 800/1 TZ bkpn_clear: WERA 8001TZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056220001 sr_ns: WERA05056220001
r: 41974078 p: 3.17 pid: 70657 b: WERA q: 4 st: 1 lt: 1 ean: 4013288015594 sr: WERA 05056939001 sr_no_br: 05056939001 sr_no_br_cl: 05056939001 sr_cl: WERA05056939001 sr_dash: sold: 44.38 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 3 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ3 n: WERA 856/1 TZ ACR PZ bit Pozidriv, PZ 3 x 25 mm - 05056939001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits with Torsion zone: where kinetic energy is diverted from peak loads. This greatly extends the product service life. Come with rough ribs (anti cam-out feature, ACR®). Tough viscous, for universal use; 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Suitable for Pozidriv screws ACR® (anti cam-out feature) to prevent any slipping out of the screw head Torsion zone for absorption of peak loads Enhanced service life of the bits Tough for hard materials Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Torsion-style design to reduce premature wear, tough, for universal use, ACR® (Anti Cam-Out Ribs) prevents bits from slipping out of screw head Features and benefits ACR® stands for "anti-cam-out ribs". ACR® bits have ribs at the drive tip that protect against slipping out of the screw head. It is recommended that ACR® bits are matched with ribbed ACR® screws for maximum effect. ACR® is a registered trademark of Phillips Screw Company. TZ-Bits are tough viscous bits with a torsion zone. Torsion bits absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. ds: dsc: Scope of delivery 856/1 TZ ACR® bits, PZ 3 x 25 mm kts: bit Pozidriv, PZ 3 x 25 mm kpn: 856/1 TZ ACR PZ kpn_dash: kpn_clear: 8561TZACRPZ bkpn: WERA 856/1 TZ ACR PZ bkpn_clear: WERA 8561TZACRPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056939001 sr_ns: WERA05056939001
r: 41990994 p: 7.39 pid: 72047 b: WERA q: 3 st: 1 lt: 1 ean: 4013288031938 sr: WERA 05118014001 sr_no_br: 05118014001 sr_no_br_cl: 05118014001 sr_cl: WERA05118014001 sr_dash: sold: 44.34 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size Slotted 4 mm Blade length 80 mm Blade thickness 0,8 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted Product Range Wera Kraftform n: WERA 2035 Micro Kraftform saw cut screwdriver, 0.80 x 4 x 80 mm - 05118014001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for slotted screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Anti-roll feature and rotating cap for rapid twisting The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Application Slotted screws Blade Round Design Chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Indispensable for many users, including electronics technicians, opticians, precision engineers, jewellers, EDP hardware fitters and model-makers ds: dsc: Scope of delivery 2035 Screwdriver for slotted screws for electronic applications, 0.80 x 4 x 80 mm kts: Kraftform saw cut screwdriver, 0.80 x 4 x 80 mm kpn: 2035 Micro kpn_dash: kpn_clear: 2035Micro bkpn: WERA 2035 Micro bkpn_clear: WERA 2035Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118014001 sr_ns: WERA05118014001
r: 02831726 p: 11.06 pid: 43243 b: WERA q: 0 st: lt: 13 ean: 4013288181428 sr: WERA 05100071001 sr_no_br: 05100071001 sr_no_br_cl: 05100071001 sr_cl: WERA05100071001 sr_dash: sold: 44.24 p_range: none type: standard act: 1 avo: 1 av: Drive size #2 Drive type Square Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V n: WERA 368 SB screwdriver for internal square screws, square 2 x 100 mm - 05100071001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver for square socket screws. The colour coding system allows the user to quickly find and identify the size needed. Multi-component Kraftform handle for fast and low-fatigue working. The Wera Black Point tip offers optimised corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Handle markings for simplified finding and sorting of the tool. Screwdriver for square socket screws Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Square socket screws Blade Round Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, # 2/300: single-component Features and benefits The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The hexagonal non-roll feature prevents any rolling away at the workplace. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 368 SB Screwdriver for square socket head screws, # 2 x 100 mm kts: screwdriver for internal square screws, square 2 x 100 mm kpn: 368 SB kpn_dash: kpn_clear: 368SB bkpn: WERA 368 SB bkpn_clear: WERA 368SB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05100071001 sr_ns: WERA05100071001
r: 02680182 p: 11.04 pid: 44381 b: WERA q: 2 st: 1 lt: 1 ean: 4013288108685 sr: WERA 05118186001 sr_no_br: 05118186001 sr_no_br_cl: 05118186001 sr_cl: WERA05118186001 sr_dash: sold: 44.16 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size T10 Blade length 60 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Product Range Wera Kraftform n: WERA 2067 TORX HF Kraftform screwdriver with holding function, TX 10 x 60 mm - 05118186001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. With practical holding function: The clamping force resulting from the seating stress between the tip and the screw profile keeps the screws securely on the tool. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro TORX® HF screwdriver with holding function for recessed TORX® screws Multi-component Kraftform Micro handle with anti-roll feature and rotating cap The Wera Black Point tip offers an exact fit and optimum corrosion protection Holding function for TORX® screws, chrome-plated Take it easy tool finder: colour coding according to profile and size Application TORX® socket screws Blade Round Design Holding function for TORX® screws made according to Acument Global Technologies Inc. specifications, chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (green = TORX®) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2067 TORX® HF Screwdriver with holding function for electronic applications, TX 10 x 60 mm kts: Kraftform screwdriver with holding function, TX 10 x 60 mm kpn: 2067 TORX HF kpn_dash: kpn_clear: 2067TORXHF bkpn: WERA 2067 TORX HF bkpn_clear: WERA 2067TORXHF c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118186001 sr_ns: WERA05118186001
r: 02822650 p: 7.35 pid: 173501 b: WERA q: 0 st: lt: 8 ean: 4013288105578 sr: WERA 05346286001 sr_no_br: 05346286001 sr_no_br_cl: 05346286001 sr_cl: WERA05346286001 sr_dash: sold: 44.1 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 n: WERA 853/4 ACR bit PH 2 x 50 mm - 05346286001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits with Torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. Come with rough ribs (anti cam-out feature, ACR®) to prevent any slipping out of the screw head. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For Phillips screws ACR® (anti cam-out feature) to prevent any slipping out of the screw head Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use, ACR® (Anti Cam-Out Ribs) prevents bit from slipping out of screw head Features and benefits ACR® stands for "anti-cam-out ribs". ACR® bits have ribs at the drive tip that protect against slipping out of the screw head. It is recommended that ACR® bits are matched with ribbed ACR® screws for maximum effect. ACR® is a registered trademark of Phillips Screw Company. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 853/4 ACR® bits, PH 2 x 50 mm kts: bit PH 2 x 50 mm kpn: 853/4 ACR kpn_dash: kpn_clear: 8534ACR bkpn: WERA 853/4 ACR bkpn_clear: WERA 8534ACR c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05346286001 sr_ns: WERA05346286001
r: 02835266 p: 8.8 pid: 41648 b: WERA q: 0 st: lt: 12 ean: 4013288039095 sr: WERA 05030106001 sr_no_br: 05030106001 sr_no_br_cl: 05030106001 sr_cl: WERA05030106001 sr_dash: sold: 44 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size Slotted 3,5 mm Blade length 80 mm Blade thickness 0,6 mm ESD Yes Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted Product Range Wera Kraftform n: WERA 1578 A ESD Micro Kraftform saw-cut screwdriver, 0.60 x 3.5 x 80 mm - 05030106001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description ESD-safe Micro screwdriver. Dependable protection against electrostatic energy and associated damage. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. The Black Point tip offers optimised corrosion protection and an exact fit. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. Kraftform Micro screwdriver for slotted screws ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Multi-component Kraftform Micro handle for fast and ergonomic screwdriving The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Application Slotted screws Blade Round Design Chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Multi-component screwdriver handle for ergonomic working. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allow rapid twisting. This makes time-consuming grip adjustments as with other conventional precision screwdrivers unnecessary. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 1578 A ESD Kraftform Micro screwdriver for slotted screws, 0.60 x 3.5 x 80 mm kts: Kraftform saw-cut screwdriver, 0.60 x 3.5 x 80 mm kpn: 1578 A ESD Micro kpn_dash: kpn_clear: 1578AESDMicro bkpn: WERA 1578 A ESD Micro bkpn_clear: WERA 1578AESDMicro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05030106001 sr_ns: WERA05030106001
r: 02043113 p: 8.76 pid: 44372 b: WERA q: 0 st: lt: 9 ean: 4013288115546 sr: WERA 05071089001 sr_no_br: 05071089001 sr_no_br_cl: 05071089001 sr_cl: WERA05071089001 sr_dash: sold: 43.8 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 10 Blade thickness Type of drive profile (bit) Torx Tamper Resistant Connection size (bit) 1/4" VDE approved No Bit tip TT10 n: WERA 3867/4 TORX BO bit with bore, stainless steel, TX 10 x 89 mm - 05071089001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits out of stainless steel for recessed TORX® screws. Wera stainless are made out of stainless steel which prevents the formation of unsightly extraneous rust. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For recessed TORX® screws with securing pin TORX® bit with bore hole on the output side Stainless Steel Bits Solution to the extraneous rust problem: fasten stainless screws with stainless tools Vacuum ice-hardened Application TORX® socket screws with safety pin (BO = with bore hole) Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Stainless steel for minimising rust Features and benefits TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that "normal" TORX® tools cannot be used. This pin fits into the borehole of TORX® BO tools allowing safety screws to be unfastened. Wera stainless steel bits are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel bits from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. ds: dsc: Scope of delivery 3867/4 TORX® BO bits with bore hole, stainless, TX 10 x 89 mm kts: bit with bore, stainless steel, TX 10 x 89 mm kpn: 3867/4 TORX BO kpn_dash: kpn_clear: 38674TORXBO bkpn: WERA 3867/4 TORX BO bkpn_clear: WERA 38674TORXBO c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05071089001 sr_ns: WERA05071089001
r: 02137670 p: 4.37 pid: 43986 b: WERA q: 0 st: lt: 13 ean: 4013288015914 sr: WERA 05066530001 sr_no_br: 05066530001 sr_no_br_cl: 05066530001 sr_cl: WERA05066530001 sr_dash: sold: 43.7 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 40 Blade thickness Type of drive profile (bit) Torx Tamper Resistant Connection size (bit) 1/4" VDE approved No Bit tip TT40 n: WERA 867/1 Z TORX BO bit with bore, TX 40 x 25 mm - 05066530001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for TORX® socket screws. The hole in the bit and the pin in the TORX® BO screw prevent unauthorized loosening. Safety connection. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For recessed TORX® screws with securing pin TORX® bit with bore hole on the output side Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application TORX® socket screws with safety pin (BO = with bore hole) Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design TORX® with bore hole, tough, for universal use Features and benefits TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that "normal" TORX® tools cannot be used. This pin fits into the borehole of TORX® BO tools allowing safety screws to be unfastened. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/1 Z TORX® BO bits with bore hole, TX 40 x 25 mm kts: bit with bore, TX 40 x 25 mm kpn: 867/1 Z TORX BO kpn_dash: kpn_clear: 8671ZTORXBO bkpn: WERA 867/1 Z TORX BO bkpn_clear: WERA 8671ZTORXBO c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066530001 sr_ns: WERA05066530001
r: 03230167 p: 21.818 pid: 70564 b: WERA q: 0 st: lt: 13 ean: 4013288221568 sr: WERA 05136403001 sr_no_br: 05136403001 sr_no_br_cl: 05136403001 sr_cl: WERA05136403001 sr_dash: sold: 43.636 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Accessory/Part type Case For Kraftform Kompakt H 1 Product Range Wera Kraftform Kompakt n: WERA 9463 fabric case for Kraftform Kompakt H 1, empty, 302 x 50 x 120 mm - 05136403001 cn: ACCESSORY/PART SCREWING cn2: ACCESSORY/PART SCREWING cn_clear: ACCESSORYPARTSCREWING d: Product description Features and benefits ds: dsc: Scope of delivery 9463 Textile box Kraftform Kompakt H 1, empty, 302 x 50 x 120 mm kts: fabric case for Kraftform Kompakt H 1, empty, 302 x 50 x 120 mm kpn: 9463 kpn_dash: kpn_clear: 9463 bkpn: WERA 9463 bkpn_clear: WERA 9463 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Accessory/part screwing | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera accessory/part screwing | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05136403001 sr_ns: WERA05136403001
r: 03214190 p: 7.272 pid: 69752 b: WERA q: 0 st: lt: 13 ean: 4013288215031 sr: WERA 05059637001 sr_no_br: 05059637001 sr_no_br_cl: 05059637001 sr_cl: WERA05059637001 sr_dash: sold: 43.632 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 89 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 8 mm Drive profile size (bit) 8 mm Product Range Wera Hex-Plus n: WERA 840/4 Z Hex-Plus hexagon bit, 8 x 89 mm - 05059637001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z bits, 8 x 89 mm kts: hexagon bit, 8 x 89 mm kpn: 840/4 Z Hex-Plus kpn_dash: 840/4 Z Hex kpn_clear: 8404ZHexPlus bkpn: WERA 840/4 Z Hex-Plus bkpn_clear: WERA 8404ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05059637001 sr_ns: WERA05059637001
r: 02757451 p: 7.272 pid: 44187 b: WERA q: 0 st: lt: 9 ean: 4013288108609 sr: WERA 05118036001 sr_no_br: 05118036001 sr_no_br_cl: 05118036001 sr_cl: WERA05118036001 sr_dash: sold: 43.632 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size T2 Blade length 40 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Product Range Wera Kraftform n: WERA 2067 TORX Kraftform screwdriver, TX 2 x 40 mm - 05118036001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for recessed TORX® screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Anti-roll feature and rotating cap for rapid twisting The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Application TORX® socket screws Blade Round Design Chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (green = TORX®) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2067 TORX® Screwdriver for TORX® screws for electronic applications, TX 2 x 40 mm kts: Kraftform screwdriver, TX 2 x 40 mm kpn: 2067 TORX kpn_dash: kpn_clear: 2067TORX bkpn: WERA 2067 TORX bkpn_clear: WERA 2067TORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118036001 sr_ns: WERA05118036001
r: 02833940 p: 7.272 pid: 41904 b: WERA q: 1 st: 1 lt: 1 ean: 4013288094766 sr: WERA 05024402001 sr_no_br: 05024402001 sr_no_br_cl: 05024402001 sr_cl: WERA05024402001 sr_dash: sold: 43.632 p_range: none type: standard act: 1 avo: 1 av: Drive size T25 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx n: WERA 977 TORX screwdriver, TX 25 x 100 mm - 05024402001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera Chiseldriver for fastening, chiselling and loosening seized screws. Multi-component Kraftform handle for fast and low-fatigue working. A hexagon blade out of high quality bit material that extends right through the blade ensures full transfer of force, even when struck with a hammer. Ductile tempered material to prevent the blade from splintering or breaking. Comes with an impact cap for durability and reduced risk of splintering. More torque can be transferred with the help of an open-end or ring spanner applied to the integrated hexagonal bolster. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Chiseldriver for fastening, chiselling and loosening Hexagonal blade extending through the handle Handle markings simplify finding and sorting of tools Impact cap and bolster for the transfer of higher torque The Wera Black Point tip offers an exact fit and optimum corrosion protection Application TORX® socket screws Blade Hexagonal throughout with impact cap, hexagonal bolster Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 977 Screwdriver for TORX® screws, TX 25 x 100 mm kts: screwdriver, TX 25 x 100 mm kpn: 977 TORX kpn_dash: kpn_clear: 977TORX bkpn: WERA 977 TORX bkpn_clear: WERA 977TORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05024402001 sr_ns: WERA05024402001
r: 02454969 p: 7.107 pid: 44062 b: WERA q: 0 st: lt: 11 ean: 4013288110510 sr: WERA 05029502001 sr_no_br: 05029502001 sr_no_br_cl: 05029502001 sr_cl: WERA05029502001 sr_dash: sold: 42.642 p_range: none type: standard act: 1 avo: 1 av: Width across flats 1/4" With safety colour code 1000V ESD No Handle type Screwdriver handle Overall length 188 mm Blade length 90 mm VDE approved No n: WERA 395 cap screwdriver hollow shank 1/4 x 90 mm - 05029502001 cn: NUT DRIVER cn2: NUT DRIVER cn_clear: NUTDRIVER d: Product description Premium Wera insert wrench screwdriver with hollow shaft for screwdriving on thread rods, because only then can the thread rod penetrate through the bolt into the hollow shaft of the screwdriver. Multi-component Kraftform handle for high working speeds and particularly ergonomic screwdriving. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. With hexagon anti-roll protection against rolling away. Handles marked for easy identification and sorting of tools. For external hexagon screws. Nutsetter for hexagon head screws Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Hollow shaft for protruding threaded rods, chrome-plated Application Hexagon headed bolts, screws and nuts Blade Round Design Hollow shaft for protruding threaded rods, chrome-plated Handle Kraftform with non-roll feature, multi-component TIP The hollow shaft enables seized screws or those on long threads to be tightened and loosened Features and benefits Hollow shaft for protruding threaded rods A screwdriver with a hollow shaft is needed whenever there are screwdriving jobs involving threaded rods i.e. the threaded rod can slip into the hollow shaft of the nutsetter. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. ds: dsc: Scope of delivery 395 HO Nutdriver, 1/4" x 90 mm kts: cap screwdriver hollow shank 1/4 x 90 mm kpn: 395 kpn_dash: kpn_clear: 395 bkpn: WERA 395 bkpn_clear: WERA 395 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Nut driver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera nut driver sr_no_br_cl_ns: 05029502001 sr_ns: WERA05029502001
r: 02288900 p: 6.09 pid: 45774 b: WERA q: 0 st: lt: 12 ean: 4013288108517 sr: WERA 05117995001 sr_no_br: 05117995001 sr_no_br_cl: 05117995001 sr_cl: WERA05117995001 sr_dash: sold: 42.63 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size Slotted 3 mm Blade length 50 mm Blade thickness 0,5 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted Product Range Wera Kraftform n: WERA 2035 Micro Kraftform saw cut screwdriver, 0.50 x 3 x 50 mm - 05117995001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for slotted screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Anti-roll feature and rotating cap for rapid twisting The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Application Slotted screws Blade Round Design Chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Indispensable for many users, including electronics technicians, opticians, precision engineers, jewellers, EDP hardware fitters and model-makers ds: dsc: Scope of delivery 2035 Screwdriver for slotted screws for electronic applications, 0.50 x 3 x 50 mm kts: Kraftform saw cut screwdriver, 0.50 x 3 x 50 mm kpn: 2035 Micro kpn_dash: kpn_clear: 2035Micro bkpn: WERA 2035 Micro bkpn_clear: WERA 2035Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05117995001 sr_ns: WERA05117995001
r: 03226621 p: 42.479 pid: 70717 b: WERA q: 0 st: lt: 13 ean: 4013288220172 sr: WERA 05022767001 sr_no_br: 05022767001 sr_no_br_cl: 05022767001 sr_cl: WERA05022767001 sr_dash: sold: 42.479 p_range: none type: standard act: 1 avo: 1 av: VDE approved Yes With safety colour code 1000V No Quantity per set 7 n: WERA 3167 i/7 TORX screwdriver set stainless steel + holder, 7-piece - 05022767001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 7-piece VDE screwdriver set made of stainless steel. Wera's stainless steel tools are vacuum ice tempered and therefore have the hardness and strength properties required for screw connections. Industrial use is possible without restrictions. Safe working at voltages up to 1,000 V is guaranteed by the Kraftform Stainless VDE screwdrivers individually tested at 10,000 V as per DIN EN 60900 (IEC 60900). The tested cold impact resistance at -40° C ensures safety even under extreme operating conditions. Multi-component Kraftform handle for fast and gentle work. Take it easy tool finder with colour coding by profile and size stamping - to help you find the required tool quickly and easily. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. 7-piece VDE Stainless screwdriver set for use in stainless steel couplings Insulated blades for secure work at 1,000 volts Multi-component Kraftform handle for high working speeds and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Blades made of stainless steel to prevent extraneous rust Kraftform Stainless VDE: The safety screwdriver for stainless steel couplings. Plus rack. With Take it easy tool finder: Colour coding by profile and size stamping. Application TORX® socket screws Design 7-piece set in a box plus rack Features and benefits Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hexagonal non-roll feature prevents any rolling away at the workplace. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Colour coding according to profile and size stamp. This enables faster and more reliable selection of the correct tool from the tool case. ds: dsc: Scope of delivery 3167 i/7 TORX® Screwdriver set, stainless and rack, 7 pieces 7x 3167 i VDE insulated TORX® screwdriver, stainless steel: TX 8x80 mm, TX 9x80 mm, TX 10x80 mm, TX 15x80 mm, TX 20x80 mm, TX 25x100 mm, TX 30x100 mm kts: screwdriver set stainless steel + holder, 7-piece kpn: 3167 i/7 TORX kpn_dash: kpn_clear: 3167i7TORX bkpn: WERA 3167 i/7 TORX bkpn_clear: WERA 3167i7TORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set sr_no_br_cl_ns: 05022767001 sr_ns: WERA05022767001
