r: 02832527 p: 10.413 pid: 43289 b: WERA q: 0 st: lt: 16 ean: 4013288181602 sr: WERA 05100086001 sr_no_br: 05100086001 sr_no_br_cl: 05100086001 sr_cl: WERA05100086001 sr_dash: sold: 93.717 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 7 mm Drive type Slotted Blade length 125 mm Blade thickness 1,2 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V n: WERA 932 A SB cutting screwdriver, 1.2 x 7 x 125 mm - 05100086001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera chiseldriver for screwdriving, chiseling, mortising and slackening stuck screws. With multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The pound-thru hexagonal blade made of premium bit material ensures power transmission without loss even at hammer blows. Tough tempered material to prevent the blade from splintering or breaking. With integrated impact cap to increase service life and reduce risk of splintering. Higher torques can be transmitted with open-end or ring spanners using the integrated hexagon bolster. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. With hexagon anti-roll protection to avoid bits from rolling away annoyingly in the workplace. Chiseldriver for fastening, chiselling and loosening Smooth hard zones for high speed turning, soft grip zones for high torque transfer Multi-component Kraftform handle for fast and ergonomic screwdriving Hexagonal blade extending through the handle, impact cap with integrated square and bolster The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Slotted screws Blade Hexagonal throughout with impact cap, hexagonal bolster from 0.8 x 4.5 Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, sizes 2.0 x 12.0, 2.5 x 14.0: Kraftform with non-roll feature, single-component Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 932 A SB Screwdriver for slotted screws, 1.2 x 7 x 125 mm kts: cutting screwdriver, 1.2 x 7 x 125 mm kpn: 932 A SB kpn_dash: kpn_clear: 932ASB bkpn: WERA 932 A SB bkpn_clear: WERA 932ASB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05100086001 sr_ns: WERA05100086001
r: 02094534 p: 10.41 pid: 42153 b: WERA q: 0 st: lt: 9 ean: 4013288032072 sr: WERA 05118060001 sr_no_br: 05118060001 sr_no_br_cl: 05118060001 sr_cl: WERA05118060001 sr_dash: sold: 93.69 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size HEX 0,7 mm Blade length 40 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Hexagon Product Range Wera Kraftform n: WERA 2054 Micro Kraftform hexagonal screwdriver, 0.7 x 40 mm - 05118060001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for hexagon socket screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving The Wera Black Point tip offers an exact fit and optimum corrosion protection Hex-Plus allows socket head screws to live longer Take it easy tool finder: colour coding according to profile and size Application Hexagon socket screws Blade Round Design Hex-Plus, chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (blue = hexagon) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2054 Screwdriver for hexagon socket screws for electronic applications, 0.7 x 40 mm kts: Kraftform hexagonal screwdriver, 0.7 x 40 mm kpn: 2054 Micro kpn_dash: kpn_clear: 2054Micro bkpn: WERA 2054 Micro bkpn_clear: WERA 2054Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118060001 sr_ns: WERA05118060001
r: 02818581 p: 18.677 pid: 45449 b: WERA q: 0 st: lt: 12 ean: 4013288105554 sr: WERA 05160896001 sr_no_br: 05160896001 sr_no_br_cl: 05160896001 sr_cl: WERA05160896001 sr_dash: sold: 93.385 p_range: none type: standard act: 1 avo: 1 av: Length 152 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 n: WERA 851/4 R PH bit Phillips with reduced shank, PH 2 x 152 mm - 05160896001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits with reduced shaft diameter for low-lying screw connections, enabling countersinking of screws without any surface damage. Profiled version. Extra-hard. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For Phillips screws With reduced shaft diameter Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Reduced shaft diameter Features and benefits Bits with reduced shaft diameter ensure that screws can be sunk without damaging the surface. This is particularly necessary in drywall construction applications. ds: dsc: Scope of delivery 851/4 R Reduced tip bits, PH 2 x 152 mm kts: bit Phillips with reduced shank, PH 2 x 152 mm kpn: 851/4 R PH kpn_dash: kpn_clear: 8514RPH bkpn: WERA 851/4 R PH bkpn_clear: WERA 8514RPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05160896001 sr_ns: WERA05160896001
r: 87010018 p: 4.64 pid: 71440 b: WERA q: 0 st: lt: 11 ean: 4013288013675 sr: WERA 05057710001 sr_no_br: 05057710001 sr_no_br_cl: 05057710001 sr_cl: WERA05057710001 sr_dash: sold: 92.8 p_range: none type: standard act: 1 avo: 1 av: Length 32 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 n: WERA 851/2 Z PH bit Phillips, PH 2 x 32 mm - 05057710001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough viscous Wera bits bits for Phillips screws and universal use. 5/16" hexagon, suitable for holders as per DIN ISO 1173-D 8. For Phillips screws Tough for hard materials 5/16" hexagon drive (Wera connecting series 2) Application Phillips screws Drive 5/16" hexagon, suitable for DIN ISO 1173-D 8 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 851/2 Z bits, PH 2 x 32 mm kts: bit Phillips, PH 2 x 32 mm kpn: 851/2 Z PH kpn_dash: kpn_clear: 8512ZPH bkpn: WERA 851/2 Z PH bkpn_clear: WERA 8512ZPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05057710001 sr_ns: WERA05057710001
r: 02835737 p: 8.429 pid: 42110 b: WERA q: 0 st: lt: 12 ean: 4013288178749 sr: WERA 05030160001 sr_no_br: 05030160001 sr_no_br_cl: 05030160001 sr_cl: WERA05030160001 sr_dash: sold: 92.719 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size IPR1 Blade length 40 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Plus Tamper Resistant Product Range Wera Kraftform n: WERA 2067 TORX PLUS IPR Micro Kraftform screwdriver, 1 IPR x 40 mm - 05030160001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for recessed IPR TORX PLUS® screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Anti-roll feature and rotating cap for rapid twisting The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Application TORX PLUS® IPR socket screws Blade Round Design Chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (purple= TORX PLUS® IPR) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2067 IPR TORX PLUS® Screwdriver for electronic applications, 1 IPR x 40 mm kts: Kraftform screwdriver, 1 IPR x 40 mm kpn: 2067 TORX PLUS IPR Micro kpn_dash: kpn_clear: 2067TORXPLUSIPRMicro bkpn: WERA 2067 TORX PLUS IPR Micro bkpn_clear: WERA 2067TORXPLUSIPRMicro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05030160001 sr_ns: WERA05030160001
r: 02827417 p: 18.512 pid: 44642 b: WERA q: 0 st: lt: 8 ean: 4013288113597 sr: WERA 05345352001 sr_no_br: 05345352001 sr_no_br_cl: 05345352001 sr_cl: WERA05345352001 sr_dash: sold: 92.56 p_range: none type: standard act: 1 avo: 1 av: Length 44 mm Blade thickness Type of drive profile (bit) Torx Connection size (bit) 4 mm Connection profile (bit) Halfmoon VDE approved No Bit tip T4 Drive profile size (bit) 4 n: WERA 867/9 C TORX bit, Halfmoon, TX 4 x 44 mm - 05345352001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Hard bits for recessed TORX® screws. Drive: 4 mm halfmoon for direct power tool connection. For recessed TORX® screws Hard design 4 mm halfmoon drive (Wera connecting series 9) Direct power tool insertion Application TORX® socket screws Drive Halfmoon, 4 mm Design Precision hardened for sensitive applications Features and benefits Halfmoon, 4mm, Wera Series 9. Drive: For direct machine drive. Suitable for: Delvo, Densei etc. ds: dsc: Scope of delivery 867/9 C TORX® bits, halfmoon, TX 4 x 44 mm kts: bit, Halfmoon, TX 4 x 44 mm kpn: 867/9 C TORX kpn_dash: kpn_clear: 8679CTORX bkpn: WERA 867/9 C TORX bkpn_clear: WERA 8679CTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05345352001 sr_ns: WERA05345352001
r: 41070406 p: 23.12 pid: 72461 b: WERA q: 3 st: 1 lt: 1 ean: sr: WERA 105007 sr_no_br: 105007 sr_no_br_cl: 105007 sr_cl: WERA105007 sr_dash: sold: 92.48 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 9 mm Drive type Slotted Blade length 150 mm Blade thickness 1,6 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V n: WERA 330SK screwdriver flat 9.0 x 150 mm - 105007 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: ds: dsc: kts: screwdriver flat 9.0 x 150 mm kpn: 330SK kpn_dash: kpn_clear: 330SK bkpn: WERA 330SK bkpn_clear: WERA 330SK c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 105007 sr_ns: WERA105007
r: 87990672 p: 8.4 pid: 71565 b: WERA q: 0 st: lt: 12 ean: 4013288016232 sr: WERA 05060130001 sr_no_br: 05060130001 sr_no_br_cl: 05060130001 sr_cl: WERA05060130001 sr_dash: sold: 92.4 p_range: none type: standard act: 1 avo: 1 av: Length 70 mm Drive profile size (bit) 40 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T40 n: WERA 867/4 Z TORX bit, TX 40 x 70 mm - 05060130001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for TORX® socket screws. Tough, for universal use. 1/4" hexagonal, suitable for bitholding screwdrivers as per DIN ISO 1173-F 6.3. For recessed TORX® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 Z TORX® bits, TX 40 x 70 mm kts: bit, TX 40 x 70 mm kpn: 867/4 Z TORX kpn_dash: kpn_clear: 8674ZTORX bkpn: WERA 867/4 Z TORX bkpn_clear: WERA 8674ZTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05060130001 sr_ns: WERA05060130001
r: 03177053 p: 18.347 pid: 33907 b: WERA q: 0 st: lt: 10 ean: 4013288202611 sr: WERA 05073071001 sr_no_br: 05073071001 sr_no_br_cl: 05073071001 sr_cl: WERA05073071001 sr_dash: sold: 91.735 p_range: none type: standard act: 1 avo: 1 av: Length 70 mm Drive profile size (bit) 25 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T25 n: WERA 867/4 Z TORX BO SB bits with bore SB, TX 25 x 70 mm (2 pcs) - 05073071001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for TORX® socket screws. The hole in the bit and the pin in the TORX® BO screw prevent unauthorized loosening. Safety connection. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For recessed TORX® screws with securing pin TORX® bit with bore hole on the output side Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX® socket screws with safety pin (BO = with bore hole) Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design TORX® with bore hole, tough, for universal use Features and benefits TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that "normal" TORX® tools cannot be used. This pin fits into the borehole of TORX® BO tools allowing safety screws to be unfastened. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 Z TORX® BO SB bits with bore hole, TX 25 x 70 mm, 2 pieces 2x 867/4 Z TORX® BO bits with bore hole: TX 25 x 70 mm kts: bits with bore SB, TX 25 x 70 mm (2 pcs) kpn: 867/4 Z TORX BO SB kpn_dash: kpn_clear: 8674ZTORXBOSB bkpn: WERA 867/4 Z TORX BO SB bkpn_clear: WERA 8674ZTORXBOSB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073071001 sr_ns: WERA05073071001
r: 03177051 p: 18.347 pid: 31398 b: WERA q: 0 st: lt: 10 ean: 4013288202604 sr: WERA 05073070001 sr_no_br: 05073070001 sr_no_br_cl: 05073070001 sr_cl: WERA05073070001 sr_dash: sold: 91.735 p_range: none type: standard act: 1 avo: 1 av: Length 70 mm Drive profile size (bit) 20 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T20 n: WERA 867/4 Z TORX BO SB bits with bore SB, TX 20 x 70 mm (2 pcs) - 05073070001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for TORX® socket screws. The hole in the bit and the pin in the TORX® BO screw prevent unauthorized loosening. Safety connection. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For recessed TORX® screws with securing pin TORX® bit with bore hole on the output side Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX® socket screws with safety pin (BO = with bore hole) Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design TORX® with bore hole, tough, for universal use Features and benefits TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that "normal" TORX® tools cannot be used. This pin fits into the borehole of TORX® BO tools allowing safety screws to be unfastened. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 Z TORX® BO SB bits with bore hole, TX 20 x 70 mm, 2 pieces 2x 867/4 Z TORX® BO bits with bore hole: TX 20 x 70 mm kts: bits with bore SB, TX 20 x 70 mm (2 pcs) kpn: 867/4 Z TORX BO SB kpn_dash: kpn_clear: 8674ZTORXBOSB bkpn: WERA 867/4 Z TORX BO SB bkpn_clear: WERA 8674ZTORXBOSB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073070001 sr_ns: WERA05073070001
r: 02815741 p: 6.1 pid: 43816 b: WERA q: 0 st: lt: 10 ean: 4013288034694 sr: WERA 05059603001 sr_no_br: 05059603001 sr_no_br_cl: 05059603001 sr_cl: WERA05059603001 sr_dash: sold: 91.5 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 50 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 2 mm Drive profile size (bit) 2 mm Product Range Wera Hex-Plus n: WERA 840/4 Z Hex-Plus hexagon bit, 2 x 50 mm - 05059603001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z bits, 2 x 50 mm kts: hexagon bit, 2 x 50 mm kpn: 840/4 Z Hex-Plus kpn_dash: 840/4 Z Hex kpn_clear: 8404ZHexPlus bkpn: WERA 840/4 Z Hex-Plus bkpn_clear: WERA 8404ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05059603001 sr_ns: WERA05059603001
r: 02828531 p: 11.404 pid: 44435 b: WERA q: 0 st: lt: 15 ean: 4013288160881 sr: WERA 05259135001 sr_no_br: 05259135001 sr_no_br_cl: 05259135001 sr_cl: WERA05259135001 sr_dash: sold: 91.232 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 20 Blade thickness Type of drive profile (bit) Torx Plus Tamper Resistant Connection size (bit) 1/4" VDE approved No Bit tip IPR20 n: WERA 867/4 IPR TORX PLUS bit with bore, 20 IPR x 89 mm - 05259135001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX PLUS® screws with safety pin. A 5-flank TORX PLUS® profile with bore hole. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For recessed TORX PLUS® IPR screws with safety pin TORX PLUS® IPR bit with bore hole on the output side Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX PLUS® IPR socket screws with safety pin Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits A 5-flank TORX PLUS® profile with a borehole. This drive geometry has only five flanks instead of the usual six and a borehole to protect safety screws against unauthorised unfastening. The screws cannot be turned with conventional, widely available tools. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 IPR TORX PLUS® bits with bore hole, 20 IPR x 89 mm kts: bit with bore, 20 IPR x 89 mm kpn: 867/4 IPR TORX PLUS kpn_dash: kpn_clear: 8674IPRTORXPLUS bkpn: WERA 867/4 IPR TORX PLUS bkpn_clear: WERA 8674IPRTORXPLUS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05259135001 sr_ns: WERA05259135001
r: 41989094 p: 10.12 pid: 70673 b: WERA q: 0 st: lt: 11 ean: 4013288028761 sr: WERA 05117684001 sr_no_br: 05117684001 sr_no_br_cl: 05117684001 sr_cl: WERA05117684001 sr_dash: sold: 91.08 p_range: none type: standard act: 1 avo: 1 av: Drive size #2 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Square n: WERA 368 screwdriver for internal square screws, square 2 x 100 mm - 05117684001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver for square socket screws. The colour coding system allows the user to quickly find and identify the size needed. Multi-component Kraftform handle for fast and low-fatigue working. The Wera Black Point tip offers optimised corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Handle markings for simplified finding and sorting of the tool. Screwdriver for square socket screws Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Square socket screws Blade Round Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, # 2/300: single-component Features and benefits The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The hexagonal non-roll feature prevents any rolling away at the workplace. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 368 Screwdriver for square socket head screws, # 2 x 100 mm kts: screwdriver for internal square screws, square 2 x 100 mm kpn: 368 kpn_dash: kpn_clear: 368 bkpn: WERA 368 bkpn_clear: WERA 368 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05117684001 sr_ns: WERA05117684001
r: 41070347 p: 9.049 pid: 72395 b: WERA q: 0 st: lt: 16 ean: 4013288003812 sr: WERA 05022825001 sr_no_br: 05022825001 sr_no_br_cl: 05022825001 sr_cl: WERA05022825001 sr_dash: sold: 90.49 p_range: none type: standard act: 1 avo: 1 av: Drive size HEX 8 mm Blade length 150 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Ball-end hexagon n: WERA 352 hexagonal ball head screwdriver, 8 x 150 mm - 05022825001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. The ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Hexagonal ballpoint screwdriver Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal blade and ballpoint for secure working even in difficult installation situations The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Hexagon socket screws Blade Hexagonal Design Ball end hexagon, chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, sizes W/F 12.0, W/F 1/2": Kraftform with non-roll feature, single-component. Take it easy tool finder: colour coding according to profile (blue = hexagon) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 352 Ball end screwdriver for hexagon socket screws, 8 x 150 mm kts: hexagonal ball head screwdriver, 8 x 150 mm kpn: 352 kpn_dash: kpn_clear: 352 bkpn: WERA 352 bkpn_clear: WERA 352 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05022825001 sr_ns: WERA05022825001
r: 02824977 p: 6.942 pid: 44627 b: WERA q: 0 st: lt: 10 ean: 4013288030528 sr: WERA 05060195001 sr_no_br: 05060195001 sr_no_br_cl: 05060195001 sr_cl: WERA05060195001 sr_dash: sold: 90.246 p_range: none type: standard act: 1 avo: 1 av: Length 152 mm Drive profile size (bit) 8 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T8 n: WERA 867/4 Z TORX bit, TX 8 x 152 mm - 05060195001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for TORX® socket screws. Tough, for universal use. 1/4" hexagonal, suitable for bitholding screwdrivers as per DIN ISO 1173-F 6.3. For recessed TORX® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 Z TORX® bits, TX 8 x 152 mm kts: bit, TX 8 x 152 mm kpn: 867/4 Z TORX kpn_dash: kpn_clear: 8674ZTORX bkpn: WERA 867/4 Z TORX bkpn_clear: WERA 8674ZTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05060195001 sr_ns: WERA05060195001
r: 02814973 p: 18.016 pid: 18993 b: WERA q: 0 st: lt: 12 ean: 4013288178657 sr: WERA 05136011001 sr_no_br: 05136011001 sr_no_br_cl: 05136011001 sr_cl: WERA05136011001 sr_dash: sold: 90.08 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Phillips Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 10 Product Range Wera Bit-Check n: WERA Bit-Check 10 Drywall 1 screwdriver bit set for drywall 10-piece - 05136011001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Bit-Check for drywall construction. High quality spacer out of aluminium; the screwdriving depth can be infinitely adjusted and allows the flush-mounting of screws; 9 drywall bits with modified output shaft, 25 mm in length. Upright positionable, multi-component Bit-Check High quality aluminium spacer with infinite adjustment Flush-mounting of screws Drywall bits with modified output shaft 1 bit holder 896/4/1 out of Aluminium with adjustable depth stop suitable for power tools and electronic drills; screw depth can be infinitely adjusted and enables flush alignment of sunken screws; 9 drywall construction bits with modified drive shaft; length 25mm Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. The screw installation depth can be infinitely adjusted and allows the desired degree of countersinking of the screws. Bits with reduced shaft diameter ensure that screws can be sunk without damaging the surface. This is particularly necessary in drywall construction applications. ds: dsc: Scope of delivery Bit-Check 10 Drywall 1, 10 pieces 1x 896/4/1 Bit Holder with adjustable depth stop: 1/4" x 50 mm 9x 851/1 RZ bits: PH 2 x 25 mm kts: screwdriver bit set for drywall 10-piece kpn: Bit-Check 10 Drywall 1 kpn_dash: Bit kpn_clear: BitCheck10Drywall1 bkpn: WERA Bit-Check 10 Drywall 1 bkpn_clear: WERA BitCheck10Drywall1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05136011001 sr_ns: WERA05136011001
r: 02827590 p: 11.239 pid: 45838 b: WERA q: 0 st: lt: 12 ean: 4013288032980 sr: WERA 05064175001 sr_no_br: 05064175001 sr_no_br_cl: 05064175001 sr_cl: WERA05064175001 sr_dash: sold: 89.912 p_range: none type: standard act: 1 avo: 1 av: Length 45 mm Blade thickness Type of drive profile (bit) Torx Connection size (bit) M6 Connection profile (bit) Outer thread VDE approved No Bit tip T25 Drive profile size (bit) 25 n: WERA 867/15 TORX bit, TX 25 x 45 mm - 05064175001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX® screws. Tough viscous for universal use. Thread drive M 6. For recessed TORX® screws Tough for hard materials Thread drive M 6 (Wera connecting series 15) Application TORX® screws Drive Thread drive M 6 Design Tough, for universal use Features and benefits Thread drive M 6 (Wera connecting series 15). Drive: For direct machine drive. Suitable for: Böllhoff/Uniquick, Holz-Her, Weber. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/15 TORX® bits M 6, TX 25 x 45 mm kts: bit, TX 25 x 45 mm kpn: 867/15 TORX kpn_dash: kpn_clear: 86715TORX bkpn: WERA 867/15 TORX bkpn_clear: WERA 86715TORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05064175001 sr_ns: WERA05064175001
r: 02832282 p: 14.834 pid: 21409 b: WERA q: 0 st: lt: 8 ean: 4013288098016 sr: WERA 05052503001 sr_no_br: 05052503001 sr_no_br_cl: 05052503001 sr_cl: WERA05052503001 sr_dash: sold: 89.004 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Connection size (machine) 1/4" Connection type (machine) External hexagon With lock Yes Magnetic Yes Length 75 mm n: WERA 889/4/1 Rapidaptor universal bit holder, 1/4" x 75 mm - 05052503001 cn: BIT HOLDER cn2: BIT HOLDER cn_clear: BITHOLDER d: Product description Rapidaptor universal holder for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). The Rapidaptor allows mounting the bits without using the sleeve. The bit is removed by simply pushing it forward - for lightning-fast bit changes, even with just one hand. The strong permanent magnet holds the bits firmly. 1/4" hexagon, suitable for machine use with mounting as per DIN ISO 1173-F 6.3. Rapidaptor technology for rapid bit change Rapidaptor universal holder with ring magnet for bits with 1/4" hexagon drive 1/4" hexagon drive Application Suitable for 1/4" DIN ISO 1173-C 6,3 and E 6,3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor easy-in, easy-out, rapid-spin, chuck-all, and single-hand technology, with strong permanent magnet Drive 1/4" hexagon suitable for power tools with DIN ISO 1173-F 6,3 receiver Features and benefits Bitholders, magnetic, for easier application of the screw Rapid bit change without needing any additional tools. One-hand operation with a freely spinning sleeve for simplified guidance of the tool. Also available in a BiTorsion design. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The free-turning sleeve allows screw steadying at the start of the screwdriving process. This makes it easier to apply the tool to the screw and prevents slipping. It can also be used as a short extension for 1/4" applications e.g. in combination with the Wera Zyklop Ratchets. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery 889/4/1 Rapidaptor Universal Bit Holder, 1/4" x 75 mm kts: Rapidaptor universal bit holder, 1/4" x 75 mm kpn: 889/4/1 kpn_dash: kpn_clear: 88941 bkpn: WERA 889/4/1 bkpn_clear: WERA 88941 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Bit holder | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera bit holder sr_no_br_cl_ns: 05052503001 sr_ns: WERA05052503001
r: 02829039 p: 29.586 pid: 42634 b: WERA q: 0 st: lt: 12 ean: 4013288155887 sr: WERA 05135942001 sr_no_br: 05135942001 sr_no_br_cl: 05135942001 sr_cl: WERA05135942001 sr_dash: sold: 88.758 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder type Internal hexagon VDE approved No With safety colour code 1000V ESD No Quantity per set 10 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 12 screwdriver handle with bit set 10-piece - 05135942001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description 9 Wera bits. 1 holder 813 R Kraftform with Rapidaptor quick-release chuck, multi-component for high working speeds and particularly ergonomic screwdriving. A screwdriver set cannot be more compact Kraftform holder with Rapidaptor quick-release chuck Torsion design of the bits against premature wear Tough viscous bits for universal use Convenient and robust storage 10-piece set1 bitholding screwdriver 813 R Kraftform with quick-release chuck Rapidaptor Features and benefits Why is the right tool so often not at hand? The reason: too many tools and overly-heavy tool bags can make it bothersome to carry them onsite. So for us it was a clear challenge: to design a tool that is suitable for a whole host of applications and can be easily taken along to jobs at other sites. Our solution: Kraftform Kompakt tools. A handle into which blades with a range of different profiles can be inserted. Compactly and protectively housed in a light and robust textile pouch or plastic box. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The sets come with a Kraftform handle, quick-release chuck and bits for manual and power tool operations. Lightning-fast bit change without any extra tools. One-handed operation. With fast-rotating sleeve for easy wielding of the screwdriver. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. In a robust storage box. ds: dsc: Scope of delivery Kraftform Kompakt 12, 10 pieces 1x 813 R Bitholding screwdriver with Rapidaptor quick-release chuck: 1/4" x 90 mm 3x 851/1 J bits: PH 00 x 25x2 mm, PH 0 x 25x2.5 mm, PH 1 x 25x3 mm 1x 851/1 TZ bits: PH 2 x 25 mm 5x 867/1 TZ TORX® bits: TX 6x25 mm, TX 5x25 mm, TX 7x25 mm, TX 8x25 mm, TX 9x25 mm kts: screwdriver handle with bit set 10-piece kpn: Kraftform Kompakt 12 kpn_dash: kpn_clear: KraftformKompakt12 bkpn: WERA Kraftform Kompakt 12 bkpn_clear: WERA KraftformKompakt12 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05135942001 sr_ns: WERA05135942001
r: 87011027 p: 29.586 pid: 19801 b: WERA q: 3 st: 1 lt: 1 ean: 4013288033802 sr: WERA 05056164001 sr_no_br: 05056164001 sr_no_br_cl: 05056164001 sr_cl: WERA05056164001 sr_dash: sold: 88.758 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Torx Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 10 Product Range Wera Bit-Check n: WERA Bit-Check 10 TX Universal 1 screwdriver bit set 10-piece - 05056164001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Robust Bit-Check by Wera. Bit-Checks provide a quick overview of the tools available. Bits not needed are simply reinserted into the set and do not get lost. Simple transportation e.g. in the shirt pocket. Includes universal holder with quick-release chuck. For the take-up of bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3. Can be inserted in the power screwdriver or for use in the chuck of the electric drill. Comes with tough viscous TORX® bits for universal use. Upright positionable Bit-Checks convince due to their functionality in a minimum of space Universal holder with quick-release chuck for rapid bit change Torsion design against premature wear Tough viscous bits for universal use In handy and robust Bit-Check 1 bit holder with quick-release chuck, 9 bits, Torsion-style (T) design to reduce premature wear, tough (Z), for universal use. Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. TZ-Bits are tough bits with a torsion zone. Torsion bits absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. For a firm, wobble-free connection between holder and bit with quick-release action. Simply push sleeve forward to change bits. The non-magnetic version prevents any unwanted attraction of metal filings. ds: dsc: Scope of delivery Bit-Check 10 TX Universal 1, 10 pieces 1x 894/4/1 K Universal Bit Holder: 1/4" x 51 mm 9x 867/1 TZ TORX® bits: TX 8x25 mm, TX 9x25 mm, TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 27x25 mm, TX 30x25 mm, TX 40x25 mm kts: screwdriver bit set 10-piece kpn: Bit-Check 10 TX Universal 1 kpn_dash: Bit kpn_clear: BitCheck10TXUniversal1 bkpn: WERA Bit-Check 10 TX Universal 1 bkpn_clear: WERA BitCheck10TXUniversal1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05056164001 sr_ns: WERA05056164001
