r: 41071119 p: 8.099 pid: 71148 b: WERA q: 0 st: lt: 9 ean: 4013288000460 sr: WERA 05002900001 sr_no_br: 05002900001 sr_no_br_cl: 05002900001 sr_cl: WERA05002900001 sr_dash: sold: 105.287 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 6 mm Bit holder type Internal hexagon VDE approved No With safety colour code 1000V ESD No Non-sparking No n: WERA 80 vario-handle, 6 x 98 mm - 05002900001 cn: BIT SCREWDRIVER cn2: BIT SCREWDRIVER cn_clear: BITSCREWDRIVER d: Product description 6 mm Vario blade adaptor. Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. The hexagonal non-roll feature prevents any annoying rolling away at the workplace. The integrated hex bolster allows higher torque to be applied with an open-end or ring spanner. Kraftform handle with 10 mm hex bolster Not suitable for bits with 1/4" hex drive Kraftform handle for high working speeds and ergonomic screwdriving Hexagonal anti-roll feature against rolling away Suitable for insertion of 6 mm Vario blades or a Vario adaptor Application 6 mm Vario blades and adaptors Handle Kraftform with non-roll feature, multi-component, 10 mm bolster Features and benefits The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery 80 Vario handle, 6 x 98 mm kts: vario-handle, 6 x 98 mm kpn: 80 kpn_dash: kpn_clear: 80 bkpn: WERA 80 bkpn_clear: WERA 80 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Bit screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera bit screwdriver sr_no_br_cl_ns: 05002900001 sr_ns: WERA05002900001
r: 41070258 p: 8.76 pid: 70335 b: WERA q: 3 st: 1 lt: 1 ean: 4013288003096 sr: WERA 05110011001 sr_no_br: 05110011001 sr_no_br_cl: 05110011001 sr_cl: WERA05110011001 sr_dash: sold: 105.12 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 8 mm Blade length 175 mm Blade thickness 1,2 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 334 saw blade screwdriver, garage blade, 1.2 x 8 x 175 mm - 05110011001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform Plus handle for comfortable ergonomic screwdriving, avoiding blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head and unintentional slipping is a thing of the past. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Slotted screwdriver - workshop blade Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Application Slotted screws Blade Round Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component, sizes 2.0 x 12.0, 2.5 x 14.0: Kraftform with non-roll feature, single-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. ds: dsc: Scope of delivery 334 Screwdriver for slotted screws, 1.2 x 8 x 175 mm kts: saw blade screwdriver, garage blade, 1.2 x 8 x 175 mm kpn: 334 kpn_dash: kpn_clear: 334 bkpn: WERA 334 bkpn_clear: WERA 334 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05110011001 sr_ns: WERA05110011001
r: 02694282 p: 6.99 pid: 44792 b: WERA q: 0 st: lt: 13 ean: 4013288032126 sr: WERA 05118070001 sr_no_br: 05118070001 sr_no_br_cl: 05118070001 sr_cl: WERA05118070001 sr_dash: sold: 104.85 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size HEX 2,5 mm Blade length 60 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Hexagon Product Range Wera Kraftform n: WERA 2054 Micro Kraftform hexagonal screwdriver, 2.5 x 60 mm - 05118070001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for hexagon socket screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving The Wera Black Point tip offers an exact fit and optimum corrosion protection Hex-Plus allows socket head screws to live longer Take it easy tool finder: colour coding according to profile and size Application Hexagon socket screws Blade Round Design Hex-Plus, chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (blue = hexagon) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2054 Screwdriver for hexagon socket screws for electronic applications, 2.5 x 60 mm kts: Kraftform hexagonal screwdriver, 2.5 x 60 mm kpn: 2054 Micro kpn_dash: kpn_clear: 2054Micro bkpn: WERA 2054 Micro bkpn_clear: WERA 2054Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118070001 sr_ns: WERA05118070001
r: 41071198 p: 34.876 pid: 71196 b: WERA q: 0 st: lt: 17 ean: 4013288111425 sr: WERA 05007681001 sr_no_br: 05007681001 sr_no_br_cl: 05007681001 sr_cl: WERA05007681001 sr_dash: sold: 104.628 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 6 Product Range Wera Kraftform n: WERA 334/355 SK/6 screwdriver set Kraftform Plus Lasertip in holder, 6-piece - 05007681001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 6-piece screwdriver set with Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. The Lasertip tip literally bites into the head of the screw and thereby prevents any slipping. More torque can be transferred with the help of an open-end or ring spanner applied to the hexagonal blade and the integrated bolster. Take it easy Tool Finder: colour coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Including a practical rack for tidy storage of the screwdrivers. Screwdriver for slotted and Pozidriv screws Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal blade and bolster for higher torque transfer Lasertip tips for more secure fit in the screw head Lasertip hexagonal blades and rack. Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted and Pozidriv screws Content 6-piece set and rack in display carton Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Hexagonal blade and bolster for higher torque transfer. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 334/355 SK/6 Screwdriver set Kraftform Plus Lasertip and rack, 6 pieces 2x 355 SK PZ Screwdriver for Pozidriv screws: PZ 1x80 mm, PZ 2x100 mm 4x 334 SK Screwdriver for slotted screws: 0.6x3.5x75 mm, 0.8x4x90 mm, 1x5.5x100 mm, 1.2x6.5x125 mm kts: screwdriver set Kraftform Plus Lasertip in holder, 6-piece kpn: 334/355 SK/6 kpn_dash: kpn_clear: 334355SK6 bkpn: WERA 334/355 SK/6 bkpn_clear: WERA 334355SK6 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05007681001 sr_ns: WERA05007681001
r: 02628049 p: 5.228 pid: 44331 b: WERA q: 0 st: lt: 6 ean: 4013288157638 sr: WERA 05057616001 sr_no_br: 05057616001 sr_no_br_cl: 05057616001 sr_cl: WERA05057616001 sr_dash: sold: 104.56 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 n: WERA 851/1 IMP DC PH DIY bit, PH 2 x 25 mm - 05057616001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for Phillips screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For Phillips screws Impaktor technology for above-average service life Particularly suitable for use with customary impact drivers Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out Take it easy tool finder: colour coding according to profile and size Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design The Impaktor technology ensures an above-average service life even under extreme conditions thanks to a best-possible utilisation of the material properties and optimally designed geometry, particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance. Take it easy tool finder: Output colour coding (red = Phillips) and large stamp to enable the desired bit to be easily located. Features and benefits Impaktor technology for an above-average service life even under extreme demands For an above-average service life. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Another product advantage is the coating of the Impaktor bits with minute diamond particles. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. For use with impact screwdrivers. Improve productivity when screwdriving with power tools. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Particularly high strength. Reduce the danger of premature bit breakage. Torsion zone specially designed to absorb such forces and thereby protect the bit tip. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 1x 851/1 IMP DC Impaktor Bits Phillips: PH 2 x 25 mm kts: bit, PH 2 x 25 mm kpn: 851/1 IMP DC PH DIY kpn_dash: kpn_clear: 8511IMPDCPHDIY bkpn: WERA 851/1 IMP DC PH DIY bkpn_clear: WERA 8511IMPDCPHDIY c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05057616001 sr_ns: WERA05057616001
r: 02835262 p: 7.44 pid: 41642 b: WERA q: 1 st: 1 lt: 1 ean: 4013288039071 sr: WERA 05030104001 sr_no_br: 05030104001 sr_no_br_cl: 05030104001 sr_cl: WERA05030104001 sr_dash: sold: 104.16 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size Slotted 2,5 mm Blade length 80 mm Blade thickness 0,4 mm ESD Yes Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted Product Range Wera Kraftform n: WERA 1578 A ESD Micro Kraftform saw-cut screwdriver, 0.40 x 2.5 x 80 mm - 05030104001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description ESD-safe Micro screwdriver. Dependable protection against electrostatic energy and associated damage. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. The Black Point tip offers optimised corrosion protection and an exact fit. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. Kraftform Micro screwdriver for slotted screws ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Multi-component Kraftform Micro handle for fast and ergonomic screwdriving The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Application Slotted screws Blade Round Design Chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Multi-component screwdriver handle for ergonomic working. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allow rapid twisting. This makes time-consuming grip adjustments as with other conventional precision screwdrivers unnecessary. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 1578 A ESD Kraftform Micro screwdriver for slotted screws, 0.40 x 2.5 x 80 mm kts: Kraftform saw-cut screwdriver, 0.40 x 2.5 x 80 mm kpn: 1578 A ESD Micro kpn_dash: kpn_clear: 1578AESDMicro bkpn: WERA 1578 A ESD Micro bkpn_clear: WERA 1578AESDMicro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05030104001 sr_ns: WERA05030104001
r: 87010240 p: 25.785 pid: 19704 b: WERA q: 1 st: 1 lt: 1 ean: 4013288033772 sr: WERA 05056161001 sr_no_br: 05056161001 sr_no_br_cl: 05056161001 sr_cl: WERA05056161001 sr_dash: sold: 103.14 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 10 Product Range Wera Bit-Check n: WERA Bit-Check 10 Universal 1 screwdriver bit set 10-piece - 05056161001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Robust Bit-Check by Wera. Bit-Checks provide a quick overview of the tools available. Bits not needed are simply reinserted into the set and do not get lost. Simple transportation e.g. in the shirt pocket. Includes universal holder with strong permanent magnet and quick-release chuck for the take-up of bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3. Can be inserted in the power screwdriver or for use in the chuck of the electric drill. Comes with Torsion bits to combat premature wear; tough viscous for universal use. Upright positionable Bit-Checks convince due to their functionality in a minimum of space Universal holder with quick-release chuck for rapid bit change Torsion design against premature wear Tough viscous bits for universal use In handy and robust Bit-Check 1 bit holder with strong permanent magnet and quick-release chuck, 9 bits, Torsion-style (T) design to reduce premature wear, tough (Z), for universal use. Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. TZ-Bits are tough viscous bits with a torsion zone. Torsion bits absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. For a firm, wobble-free connection between holder and bit with quick-release action. Simply push sleeve forward to change bits. The magnetic design enables simplified positioning of the screw. ds: dsc: Scope of delivery Bit-Check 10 Universal 1, 10 pieces 1x 895/4/1 K Universal Bit Holder: 1/4" x 52 mm 3x 851/1 TZ bits: PH 1x25 mm, PH 2x25 mm, PH 3x25 mm 3x 855/1 TZ bits: PZ 1x25 mm, PZ 2x25 mm, PZ 3x25 mm 3x 800/1 TZ bits: 0.8x5.5x25 mm, 1x5.5x25 mm, 1.2x6.5x25 mm kts: screwdriver bit set 10-piece kpn: Bit-Check 10 Universal 1 kpn_dash: Bit kpn_clear: BitCheck10Universal1 bkpn: WERA Bit-Check 10 Universal 1 bkpn_clear: WERA BitCheck10Universal1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05056161001 sr_ns: WERA05056161001
r: 02823118 p: 10.247 pid: 45200 b: WERA q: 0 st: lt: 12 ean: 4013288015426 sr: WERA 05065096001 sr_no_br: 05065096001 sr_no_br_cl: 05065096001 sr_cl: WERA05065096001 sr_dash: sold: 102.47 p_range: none type: standard act: 1 avo: 1 av: Length 33 mm Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) M4 Connection profile (bit) Outer thread VDE approved No Bit tip PZ2 Drive profile size (bit) 2 n: WERA 855/11 PZ bit Pozidriv, PZ 2 x 33 mm - 05065096001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough viscous Wera bits for Pozidriv screws for universal use, with thread drive M 4. Suitable for Pozidriv screws Tough for hard materials Thread drive M 4 (Wera connecting series 11) Application Suitable for Pozidriv screws Drive Thread drive M 4 Design Tough, for universal use Features and benefits Thread drive M 4 (Wera connecting series 11). Drive: For direct machine drive. Suitable for: Böllhoff/Uniquick, Weber. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 855/11 Bits M 4, PZ 2 x 33 mm kts: bit Pozidriv, PZ 2 x 33 mm kpn: 855/11 PZ kpn_dash: kpn_clear: 85511PZ bkpn: WERA 855/11 PZ bkpn_clear: WERA 85511PZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05065096001 sr_ns: WERA05065096001
r: 02832470 p: 10.247 pid: 42936 b: WERA q: 1 st: 1 lt: 1 ean: 4013288017789 sr: WERA 05017052001 sr_no_br: 05017052001 sr_no_br_cl: 05017052001 sr_cl: WERA05017052001 sr_dash: sold: 102.47 p_range: none type: standard act: 1 avo: 1 av: Drive size PZ2 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Pozidriv n: WERA 918 SPZ Pozidriv screwdriver, PZ 2 x 100 mm - 05017052001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera chiseldriver for screwdriving, chiseling, mortising and slackening stuck screws. With multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The pound-thru hexagonal blade made of premium bit material ensures power transmission without loss even at hammer blows. Tough tempered material to prevent the blade from splintering or breaking. With integrated impact cap to increase service life and reduce risk of splintering. Higher torques can be transmitted with open-end or ring spanners using the integrated hexagon bolster. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. With hexagon anti-roll protection to avoid bits from rolling away annoyingly in the workplace. Chiseldriver for fastening, chiselling and loosening Hexagonal blade extending through the handle Multi-component Kraftform handle for fast and ergonomic screwdriving Impact cap and bolster for the transfer of higher torque The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Suitable for Pozidriv screws Blade Hexagonal throughout with impact cap, hexagonal bolster for sizes 1 - 4 Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, size 4/200: Kraftform with non-roll feature, single-component Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 918 SPZ Screwdriver for Pozidriv screws, PZ 2 x 100 mm kts: Pozidriv screwdriver, PZ 2 x 100 mm kpn: 918 SPZ kpn_dash: kpn_clear: 918SPZ bkpn: WERA 918 SPZ bkpn_clear: WERA 918SPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05017052001 sr_ns: WERA05017052001
r: 02468266 p: 7.272 pid: 44550 b: WERA q: 0 st: lt: 14 ean: 4013288108326 sr: WERA 05029463001 sr_no_br: 05029463001 sr_no_br_cl: 05029463001 sr_cl: WERA05029463001 sr_dash: sold: 101.808 p_range: none type: standard act: 1 avo: 1 av: Width across flats 7 mm With safety colour code 1000V ESD No Handle type Screwdriver handle Overall length 195 mm Blade length 90 mm VDE approved No n: WERA 395 cap screwdriver hollow shank 7.0 x 90 mm - 05029463001 cn: NUT DRIVER cn2: NUT DRIVER cn_clear: NUTDRIVER d: Product description Premium Wera insert wrench screwdriver with hollow shaft for screwdriving on thread rods, because only then can the thread rod penetrate through the bolt into the hollow shaft of the screwdriver. Multi-component Kraftform handle for high working speeds and particularly ergonomic screwdriving. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. With hexagon anti-roll protection against rolling away. Handles marked for easy identification and sorting of tools. For external hexagon screws. Nutsetter for hexagon head screws Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Hollow shaft for protruding threaded rods, chrome-plated Application Hexagon headed bolts, screws and nuts Blade Round Design Hollow shaft for protruding threaded rods, chrome-plated Handle Kraftform with non-roll feature, multi-component TIP The hollow shaft enables seized screws or those on long threads to be tightened and loosened Features and benefits Hollow shaft for protruding threaded rods A screwdriver with a hollow shaft is needed whenever there are screwdriving jobs involving threaded rods i.e. the threaded rod can slip into the hollow shaft of the nutsetter. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. ds: dsc: Scope of delivery 395 HO Nutdriver, 7 x 90 mm kts: cap screwdriver hollow shank 7.0 x 90 mm kpn: 395 kpn_dash: kpn_clear: 395 bkpn: WERA 395 bkpn_clear: WERA 395 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Nut driver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera nut driver sr_no_br_cl_ns: 05029463001 sr_ns: WERA05029463001
r: 02307161 p: 6.776 pid: 45779 b: WERA q: 2 st: 1 lt: 1 ean: 4013288100719 sr: WERA 05028052001 sr_no_br: 05028052001 sr_no_br_cl: 05028052001 sr_cl: WERA05028052001 sr_dash: sold: 101.64 p_range: none type: standard act: 1 avo: 1 av: Drive size T20 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx n: WERA 367 TORX HF screwdriver with holding function, TX 20 x 100 mm - 05028052001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. With holding function: The clamping force resulting from the seating stress between the tip and the screw profile keeps the screws securely on the tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Handles marked for easy identification and sorting of tools. Screwdriver for recessed TORX® screws Holding function for TORX® screws Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Application TORX® socket screws Blade Round Design Holding function for TORX® screws made according to Acument Intellectual Properties specifications, chrome-plated Handle Kraftform with non-roll feature, multi-component Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. ds: dsc: Scope of delivery 367 TORX® HF Screwdriver with holding function for TORX® screws, TX 20 x 100 mm kts: screwdriver with holding function, TX 20 x 100 mm kpn: 367 TORX HF kpn_dash: kpn_clear: 367TORXHF bkpn: WERA 367 TORX HF bkpn_clear: WERA 367TORXHF c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05028052001 sr_ns: WERA05028052001
r: 02827852 p: 8.36 pid: 44652 b: WERA q: 0 st: lt: 12 ean: 4013288041296 sr: WERA 05060149001 sr_no_br: 05060149001 sr_no_br_cl: 05060149001 sr_cl: WERA05060149001 sr_dash: sold: 100.32 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 3 Blade thickness Type of drive profile (bit) Square Connection size (bit) 1/4" VDE approved No Bit tip # 3 n: WERA 868/4 BTZ Square-Plus inside square bit, 3 x 50 mm - 05060149001 cn: BIT cn2: BIT cn_clear: BIT d: Product description BiTorsion bits for square head socket screws with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Best possible service life with the matching holder. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-F 6.3. Suitable for square head socket screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Square socket head screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design BiTorsion for long service life, extra-tough, for universal use Features and benefits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. The BiTorsion holder and the BiTorsion bit can, of course, be used independently of one another. ds: dsc: Scope of delivery 868/4 BTZ Square-Plus bits, # 3 x 50 mm kts: inside square bit, # 3 x 50 mm kpn: 868/4 BTZ Square-Plus kpn_dash: 868/4 BTZ Square kpn_clear: 8684BTZSquarePlus bkpn: WERA 868/4 BTZ Square-Plus bkpn_clear: WERA 8684BTZSquarePlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05060149001 sr_ns: WERA05060149001
r: 02835813 p: 16.694 pid: 20061 b: WERA q: 0 st: lt: 8 ean: 4013288111487 sr: WERA 05071100001 sr_no_br: 05071100001 sr_no_br_cl: 05071100001 sr_cl: WERA05071100001 sr_dash: sold: 100.164 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Connection size (machine) 1/4" Connection type (machine) External hexagon With lock No Magnetic No Length 50 mm n: WERA 3888/4/1 K Rapidaptor universal bit holder, stainless steel, 1/4" x 50 mm - 05071100001 cn: BIT HOLDER cn2: BIT HOLDER cn_clear: BITHOLDER d: Product description Universal holder for the take-up of bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 (ISO 1173). Stainless design to prevent extraneous rust. Comes with Rapidaptor technology, which allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward - for rapid bit change with just one hand. 1/4" hexagon, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3. Rapidaptor universal holder, stainless, for bits with 1/4" hexagon head drive Solution to the extraneous rust problem: fasten stainless screws with stainless tools No chance for extraneous rust with stainless steel Rapidaptor technology for rapid bit change 1/4" hexagon drive Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand Technology; stainless steel for minimising rust Drive 1/4" hexagon, suitable for power tools with DIN ISO 1173-F 6.3 chuck Features and benefits Stainless steel has the property of not rusting. However, if tools made out of conventional steel are used for stainless steel components or screws, the particles left behind from these tools can adhere to the surface and then rust. This effect - known as extraneous rust - can impair the visual appearance and even cause structural damage that may result in expensive repair work. The wear particles that cause this rust effect can be prevented by using stainless steel tools. Manufactured out of stainless steel thus preventing the formation of unsightly extraneous rust when working with stainless steel. Additionally, it offers all the advantages of the Rapidaptor technology. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The free-turning sleeve allows screw steadying at the start of the screwdriving process. This makes it easier to apply the tool to the screw and prevents slipping. It can also be used as a short extension for 1/4" applications e.g. in combination with the Wera Zyklop Ratchets. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery 3888/4/1 K Rapidaptor Universal Bit Holder, stainless, 1/4" x 50 mm kts: Rapidaptor universal bit holder, stainless steel, 1/4" x 50 mm kpn: 3888/4/1 K kpn_dash: kpn_clear: 388841K bkpn: WERA 3888/4/1 K bkpn_clear: WERA 388841K c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Bit holder | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera bit holder sr_no_br_cl_ns: 05071100001 sr_ns: WERA05071100001
r: 03226505 p: 7.15 pid: 71429 b: WERA q: 0 st: lt: 8 ean: 4013288194800 sr: WERA 05118026001 sr_no_br: 05118026001 sr_no_br_cl: 05118026001 sr_cl: WERA05118026001 sr_dash: sold: 100.1 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size PH0 Blade length 40 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Phillips Product Range Wera Kraftform n: WERA 2050 PH Micro Kraftform Phillips screwdriver, PH 0 x 40 mm - 05118026001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for cross-recess Phillips screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Anti-roll feature and rotating cap for rapid twisting The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Application Phillips screws Blade Round Design Chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (red = Phillips) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2050 PH Screwdriver for Phillips screws for electronic applications, PH 0 x 40 mm kts: Kraftform Phillips screwdriver, PH 0 x 40 mm kpn: 2050 PH Micro kpn_dash: kpn_clear: 2050PHMicro bkpn: WERA 2050 PH Micro bkpn_clear: WERA 2050PHMicro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118026001 sr_ns: WERA05118026001
r: 08131762 p: 49.545 pid: 173583 b: WERA q: 2 st: 1 lt: 1 ean: 4013288233981 sr: WERA 05051513001 sr_no_br: 05051513001 sr_no_br_cl: 05051513001 sr_cl: WERA05051513001 sr_dash: sold: 99.09 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Bit holder type Internal hexagon Type of drive profile (bit) Mixed VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 6 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 20 RA-R bit set, 6-piece - 05051513001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Kraftform handle with magazine for 6 bits integrated in the handle; with telescopic blade; for 1/4" hex drive bits. The ratchet with fine toothing integrated in the handle allows fast working. Switching the screwdriving direction is intuitive: Turn the ring switch clockwise for clockwise screwdriving, turn it counterclockwise for counterclockwise screwdriving. Use position 0 to deactivate the ratchet mechanism for precise working. The telescopic blade with Rapidaptor quick-release chuck, which can be retracted into the handle, allows quick manual screwdriving even in confined working situations when the blade is retracted. The blade can be extended by simply pressing the locking sleeve. The tool can now be used as a fully-fledged screwdriver. The telescopic blade can be removed and used as a machine adapter, as well as returned to its original position. The Rapidaptor technology of the bit holder makes for a quick bit change. Includes 6 BiTorsion bits for long product life, tough, for universal use; stored in the bit magazine integrated in the handle. The strong permanent magnet in the 1/4" bit mounting ensures a secure hold of the bit. The 2-component Kraftform handle with the combination of hard and soft zones allows for a firm grip and precise working. With a robust pouch. The ratchet with fine toothing integrated in the handle allows fast working The innovative ratchet mechanism also allows fast "spinning". A real problem solver when there is no resistance from the screw Intuitive switching: If I turn the switch clockwise - the ratchet turns clockwise, if I turn the switch counterclockwise - it goes counterclockwise Integrated bit magazine with 6x 25 mm bits BiTorsion Bits Application Suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 and Wera connection series 1 and 4 Design Ratchet with fine toothing integrated in the handle, intuitive switching, use position 0 to deactivate the ratchet mechanism for precise working; 1/4" hexagonal bit mounting, magnetic; connector, telescopic blade, Rapidaptor technology with rapid-in, rapid-out, rapid-spin, chuck-all and single-hand functions. 6 BiTorsion bits for long product life, tough, for universal use. Take it easy toolfinder: with size stamping and colour coding by tip to help you find the required bit easily. Handle Kraftform with anti-roll protection, multi-component, integrated magazine Features and benefits The ratchet with fine toothing integrated in the handle allows fast working. The innovative ratchet mechanism also allows fast "spinning". A real problem solver when there is no resistance from the screw. Intuitive switching of the ratchet mechanism. Turn the switch clockwise for clockwise screwdriving; turn it counterclockwise for counterclockwise screwdriving. Use position 0 to deactivate the ratchet mechanism for precise working. The innovative ratchet mechanism also allows fast "spinning". A real problem solver when there is no resistance from the screw. This set has it all: ratchet integrated in the handle, a telescopic blade that can be retracted into the handle (which can also be removed and used as a bit holder in the screwdriver machine) and a bit magazine integrated in the handle. The Rapidaptor technology guarantees lightning-fast bit changes as well as easy wielding of the tool in machine operations via the fast-rotating sleeve. The sets come with a Kraftform handle, quick-release chuck and bits for manual and power tool operations. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. When the telescopic blade is retracted in the handle, the tool can be used even in confined working situations. The telescopic blade can be extended by simply pressing the locking sleeve. The tool can now be used as a fully-fledged screwdriver. ds: dsc: Scope of delivery Kraftform Kompakt 20 RA-R, 6 pieces 2x 851/1 BTZ bits: PH 1x25 mm, PH 2x25 mm 1x 855/1 BTZ bits: PZ 2 x 25 mm 2x 867/1 BTZ TORX® bits: TX 20x25 mm, TX 25x25 mm 1x 800/1 BTZ bits: 0.8 x 5.5 x 25 mm kts: bit set, 6-piece kpn: Kraftform Kompakt 20 RA-R kpn_dash: Kraftform Kompakt 20 RA kpn_clear: KraftformKompakt20RAR bkpn: WERA Kraftform Kompakt 20 RA-R bkpn_clear: WERA KraftformKompakt20RAR c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05051513001 sr_ns: WERA05051513001
r: 41071195 p: 12.355 pid: 71821 b: WERA q: 1 st: 1 lt: 1 ean: 4013288108098 sr: WERA 05007676001 sr_no_br: 05007676001 sr_no_br_cl: 05007676001 sr_cl: WERA05007676001 sr_dash: sold: 98.84 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 9 mm Blade length 150 mm Blade thickness 1,6 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 334 SK saw blade screwdriver, hexagonal key blade, 1.6 x 9 x 150 mm - 05007676001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdrivers with hexagonal blades. Multi-component Kraftform Plus handle. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Lasertip tips: microscopically roughened surface which bites firmly into the screw head. This means less slipping and less contact pressure being required. Comes with bolster to enable higher torque to be applied. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdriver for slotted screws Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal blade and bolster for higher torque transfer Lasertip tips for more secure fit in the screw head Application Slotted screws Blade Hexagonal with bolster from 0.8 x 4.5 Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Hexagonal blade and bolster for higher torque transfer. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery 334 SK Screwdriver for slotted screws, 1.6 x 9 x 150 mm kts: saw blade screwdriver, hexagonal key blade, 1.6 x 9 x 150 mm kpn: 334 SK kpn_dash: kpn_clear: 334SK bkpn: WERA 334 SK bkpn_clear: WERA 334SK c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05007676001 sr_ns: WERA05007676001
r: 08103737 p: 24.628 pid: 71548 b: WERA q: 0 st: lt: 8 ean: 4013288226587 sr: WERA 05051511001 sr_no_br: 05051511001 sr_no_br_cl: 05051511001 sr_cl: WERA05051511001 sr_dash: sold: 98.512 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved No ESD No Quantity per set 7 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 27 Set 2 bit handle 7-piece - 05051511001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Wera compact tool with multi-component Kraftform handle for high working speeds and particularly ergonomic screwdriving. Bit magazine integrated in the handle, 6 tough bits for universal use. Bit holder with strong permanent magnet for secure seating of the bit. Bitholding handle with bit magazine Bit holder with strong permanent magnet which holds bits firmly Magazine integrated in the handle for bit storage With 6 bits in the magazine: Phillips-head Phillips and slotted; tough Application Suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and Wera connection series 1 Design Hexagonal blade, nicromatt, stainless steel bit holder, with strong permanent magnet; 6 bits, tough, for universal use. Handle Kraftform with anti-roll protection, multi-component, integrated magazine with 6 bits Features and benefits The handle can be opened via an operating button. A magazine for 6 bits is integrated in the handle. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. With stainless steel sleeve and strong permanent magnet. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery Kraftform Kompakt 27 Set 2, 7 pieces 1x 828/1 Bitholding screwdriver, with strong permanent magnet; magazine for 6 bits in the handle: 1/4" 3x 851/1 Z bits: PH 1x25 mm, PH 2x25 mm, PH 3x25 mm 3x 800/1 Z bits: 0.6x4.5x25 mm, 1x5.5x25 mm, 1.2x6.5x25 mm kts: bit handle 7-piece kpn: Kraftform Kompakt 27 Set 2 kpn_dash: kpn_clear: KraftformKompakt27Set2 bkpn: WERA Kraftform Kompakt 27 Set 2 bkpn_clear: WERA KraftformKompakt27Set2 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05051511001 sr_ns: WERA05051511001
r: 02690004 p: 14.008 pid: 44777 b: WERA q: 1 st: 1 lt: 1 ean: 4013288017758 sr: WERA 05017015001 sr_no_br: 05017015001 sr_no_br_cl: 05017015001 sr_cl: WERA05017015001 sr_dash: sold: 98.056 p_range: none type: standard act: 1 avo: 1 av: Drive size PH3 Blade length 150 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Phillips n: WERA 917 SPH Phillips screwdriver, PH 3 x 150 mm - 05017015001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera chiseldriver for screwdriving, chiseling, mortising and slackening stuck screws. With multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The pound-thru hexagonal blade made of premium bit material ensures power transmission without loss even at hammer blows. Tough tempered material to prevent the blade from splintering or breaking. With integrated impact cap to increase service life and reduce risk of splintering. Higher torques can be transmitted with open-end or ring spanners using the integrated hexagon bolster. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. With hexagon anti-roll protection to avoid bits from rolling away annoyingly in the workplace. Chiseldriver for fastening, chiselling and loosening Hexagonal blade extending through the handle Multi-component Kraftform handle for fast and ergonomic screwdriving Impact cap and bolster for the transfer of higher torque The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Phillips screws Blade Hexagonal throughout with impact cap, hexagonal bolster for sizes 1 - 4 Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, size 4/200: Kraftform with non-roll feature, single-component Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 917 SPH Screwdriver for Phillips screws, PH 3 x 150 mm kts: Phillips screwdriver, PH 3 x 150 mm kpn: 917 SPH kpn_dash: kpn_clear: 917SPH bkpn: WERA 917 SPH bkpn_clear: WERA 917SPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05017015001 sr_ns: WERA05017015001
r: 03226370 p: 9.752 pid: 69758 b: WERA q: 0 st: lt: 12 ean: 4013288108173 sr: WERA 05009319001 sr_no_br: 05009319001 sr_no_br_cl: 05009319001 sr_cl: WERA05009319001 sr_dash: sold: 97.52 p_range: none type: standard act: 1 avo: 1 av: Drive size PZ2 Blade length 300 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Pozidriv n: WERA 355 PZ Pozidriv screwdriver, PZ 2 x 300 mm - 05009319001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver by Wera. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer for fast and low-fatigue working. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdriver, for cross-recess screws, Pozidriv Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Chrome-plated Application Suitable for Pozidriv screws Blade Round Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (black = Pozidriv) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 355 PZ Screwdriver for Pozidriv screws, PZ 2 x 300 mm kts: Pozidriv screwdriver, PZ 2 x 300 mm kpn: 355 PZ kpn_dash: kpn_clear: 355PZ bkpn: WERA 355 PZ bkpn_clear: WERA 355PZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05009319001 sr_ns: WERA05009319001
r: 02823111 p: 9.73 pid: 45122 b: WERA q: 0 st: lt: 12 ean: 4013288105905 sr: WERA 05073523001 sr_no_br: 05073523001 sr_no_br_cl: 05073523001 sr_cl: WERA05073523001 sr_dash: sold: 97.3 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ1 Quantity per blister 1 n: WERA 855/4 Z SB bit Pozidriv, PZ 1 x 89 mm - 05073523001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for Pozidriv* screws. Tough, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. * Pozidriv = registered trademark of the company European Industrial Service Ltd. Suitable for Pozidriv screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 855/4 Z SB bits, PZ 1 x 89 mm kts: bit Pozidriv, PZ 1 x 89 mm kpn: 855/4 Z SB kpn_dash: kpn_clear: 8554ZSB bkpn: WERA 855/4 Z SB bkpn_clear: WERA 8554ZSB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073523001 sr_ns: WERA05073523001
