r: 02828375 p: 9.752 pid: 42871 b: WERA q: 0 st: lt: 10 ean: 4013288115560 sr: WERA 05071091001 sr_no_br: 05071091001 sr_no_br_cl: 05071091001 sr_cl: WERA05071091001 sr_dash: sold: 243.8 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 20 Blade thickness Type of drive profile (bit) Torx Tamper Resistant Connection size (bit) 1/4" VDE approved No Bit tip TT20 n: WERA 3867/4 TORX BO bit with bore, stainless steel, TX 20 x 89 mm - 05071091001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits out of stainless steel for recessed TORX® screws. Wera stainless are made out of stainless steel which prevents the formation of unsightly extraneous rust. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For recessed TORX® screws with securing pin TORX® bit with bore hole on the output side Stainless Steel Bits Solution to the extraneous rust problem: fasten stainless screws with stainless tools Vacuum ice-hardened Application TORX® socket screws with safety pin (BO = with bore hole) Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Stainless steel for minimising rust Features and benefits TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that "normal" TORX® tools cannot be used. This pin fits into the borehole of TORX® BO tools allowing safety screws to be unfastened. Wera stainless steel bits are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel bits from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. ds: dsc: Scope of delivery 3867/4 TORX® BO bits with bore hole, stainless, TX 20 x 89 mm kts: bit with bore, stainless steel, TX 20 x 89 mm kpn: 3867/4 TORX BO kpn_dash: kpn_clear: 38674TORXBO bkpn: WERA 3867/4 TORX BO bkpn_clear: WERA 38674TORXBO c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05071091001 sr_ns: WERA05071091001
r: 02830757 p: 30.413 pid: 42829 b: WERA q: 1 st: 1 lt: 1 ean: 4013288094704 sr: WERA 05320540001 sr_no_br: 05320540001 sr_no_br_cl: 05320540001 sr_cl: WERA05320540001 sr_dash: sold: 243.304 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 7 Product Range Wera Kraftform n: WERA 335/350/367/7 screwdriver set Kraftform Plus laser tip in holder 7-piece - 05320540001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 7-piece screwdriver set with Kraftform handle for pleasant, ergonomic working that prevents blisters and calluses. The Lasertip tip literally bites into the head of the screw and thereby prevents any slipping out of the screw head. Take it easy Tool Finder: colour coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Includes a practical rack for tidy storage of the screwdrivers. Screwdrivers for slotted, cross-recess Phillips and Pozidriv screws and TORX® Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Lasertip round blades and rack. Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted, cross, Phillips-Recess, Pozidriv and TORX® screws Content 7-piece set and rack in display carton Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 335/350/367/7 Rack Screwdriver set Kraftform Plus Lasertip and rack, 7 pieces 1x 350 PH Screwdriver for Phillips screws: PH 2 x 100 mm 2x 355 PZ Screwdriver for Pozidriv screws: PZ 1x80 mm, PZ 2x100 mm 1x 335 Screwdriver for slotted screws: 0.8 x 4 x 100 mm 3x 367 Screwdriver for TORX® screws: TX 15x80 mm, TX 20x100 mm, TX 25x100 mm kts: screwdriver set Kraftform Plus laser tip in holder 7-piece kpn: 335/350/367/7 kpn_dash: kpn_clear: 3353503677 bkpn: WERA 335/350/367/7 bkpn_clear: WERA 3353503677 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05320540001 sr_ns: WERA05320540001
r: 03229609 p: 34.545 pid: 21045 b: WERA q: 0 st: lt: 12 ean: 4013288213976 sr: WERA 05136392001 sr_no_br: 05136392001 sr_no_br_cl: 05136392001 sr_cl: WERA05136392001 sr_dash: sold: 241.815 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Mixed; Phillips; Pozidriv; Torx Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 12 Product Range Wera Bit-Check n: WERA Bit-Check 12 Diamond 1 SB screwdriver bit set 12-piece - 05136392001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Bits with tiny diamond particles on the bit tip. This ensures a secure fit in the screw head, reduces the contact pressure required and lowers the risk of slipping. BiTorsion bits with a torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. Comes with Rapidaptor technology, which allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward - for rapid bit change with just one hand. For insertion in the power screwdriver or into the chuck of the power drill. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera Take it easy Tool Finder with its colour coding and clearly visible imprint. Upright positionable Bit-Checks convince due to their functionality in a minimum of space BiTorsion bits for long service life Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out Rapidaptor holder for rapid bit change Take it easy tool finder: colour coding according to profile and size 1 bit holder Rapidaptor with quick-release chuck, 11 BiTorsion bits for long service life, diamond-coated (BDC) for secure screw fit. The Take it easy Bit-Checks have bits with a sleeve which - from its colour and size designation - make it simple to access the right bit quickly. Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The diamond coating of the DC bits lowers the danger of slipping as the minute diamond particles literally "bite" themselves into the screw head. The minute diamond particles applied to the tip of the tool literally "bite" into the screw and ensure an exact, anti-slip fit in the head of the screw. This secure fit protects the screw. The cam-out forces which compel the user to apply greater pressure to the screw are considerably reduced. Ideal for sensitive materials Lightning-fast bit change without any extra tools. One-handed operation. With fast-rotating sleeve for easy wielding of the screwdriver. Bitholders, magnetic, for easier application of the screw The Take it easy Bit-Checks have bits with a sleeve which - from its colour (e.g. red = Phillips) and size designation - make it simple to access the right bit quickly. ds: dsc: Scope of delivery Bit-Check 12 Diamond 1 SB, 12 pieces 1x 889/4/1 K Rapidaptor Universal Bit Holder: 1/4" x 50 mm 3x 851/1 BDC bits: PH 1x25 mm, 2x PH 2x25 mm 3x 855/1 BDC bits: PZ 1x25 mm, 2x PZ 2x25 mm 5x 867/1 BDC TORX® bits: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm kts: screwdriver bit set 12-piece kpn: Bit-Check 12 Diamond 1 SB kpn_dash: Bit kpn_clear: BitCheck12Diamond1SB bkpn: WERA Bit-Check 12 Diamond 1 SB bkpn_clear: WERA BitCheck12Diamond1SB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05136392001 sr_ns: WERA05136392001
r: 02829014 p: 12.727 pid: 31760 b: WERA q: 0 st: lt: 7 ean: 4013288169341 sr: WERA 05671385001 sr_no_br: 05671385001 sr_no_br_cl: 05671385001 sr_cl: WERA05671385001 sr_dash: sold: 241.813 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Accessory/Part type Case For Kraftform Kompakt (12 pieces) Product Range Wera Kraftform n: WERA 9454 folding case for Kraftform Micro screwdrivers, maximum 12 parts, empty, 235 x 115 mm - 05671385001 cn: ACCESSORY/PART SCREWING cn2: ACCESSORY/PART SCREWING cn_clear: ACCESSORYPARTSCREWING d: Product description Robust pouch for 12 Kraftform Micro screwdrivers with strong Velcro closure, belt loop and hanging loop, empty. Pouch for Kraftform Micro screwdrivers Robust pouch with strong Velcro closure, belt loop and hanging loop Offers space for 12 Kraftform Micro screwdrivers Features and benefits ds: dsc: Scope of delivery 9454 Pouch for up to 12-piece sets Kraftform Micro screwdrivers, empty, 235 x 115 mm kts: folding case for Kraftform Micro screwdrivers, maximum 12 parts, empty, 235 x 115 mm kpn: 9454 kpn_dash: kpn_clear: 9454 bkpn: WERA 9454 bkpn_clear: WERA 9454 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Accessory/part screwing | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera accessory/part screwing | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05671385001 sr_ns: WERA05671385001
r: 08085373 p: 40.165 pid: 69882 b: WERA q: 0 st: lt: 11 ean: 4013288222824 sr: WERA 05023461001 sr_no_br: 05023461001 sr_no_br_cl: 05023461001 sr_cl: WERA05023461001 sr_dash: sold: 240.99 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch VDE approved No With safety colour code 1000V ESD No Non-sparking No n: WERA 416 RA T-handle bit holder with ratchet function and Rapidaptor quick-change function, 1/4" x 45 mm - 05023461001 cn: BIT SCREWDRIVER cn2: BIT SCREWDRIVER cn_clear: BITSCREWDRIVER d: Product description The integrated ratchet with fine toothing (80 teeth/return angle 4.5°) eases and accelerates screwdriving without having to reposition the tool. The ratchet mechanism completely embedded in the handle ensures very handy and comfortable work. With reversing lever for comfortable clockwise/counterclockwise direction change in one-hand operation. The ergonomic shape of the handle fills the ball of the hand well, the fingers lie securely in the softly rounded recessed grips. The whole hand comes into contact with the handle, friction loss between hand and handle is avoided. Bit holder for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3. With Rapidaptor technology for lightning-fast bit changes. The integrated ratchet with fine toothing ensures fast and safe working Reversing lever for comfortable clockwise/counterclockwise direction change Convenient working thanks to the ratchet mechanism fully embedded in the handle Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working Fast-rotating sleeve for extremely high working speed Application Suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 and Wera connection series 1 and 4 Design Ratchet with fine toothing integrated in the handle (80 teeth, return angle 4.5°) and clockwise/counterclockwise reversing lever; 1/4" hexagonal socket mounting with Rapidaptor technology with rapid-in, rapid-out, rapid-spin, chuck-all and single-hand function for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 and Wera series 1 and 4, magnetic Handle T-shape, 2 components, hole for hanging Features and benefits The ratchet mechanism of the 416 RA T-handle bitholding screwdriver is completely embedded in the handle. The compact shape of the tool allows convenient working. The integrated ratchet with fine toothing (80 teeth) and a return angle of 4.5° eases and accelerates screwdriving without having to reposition the tool. The ratchet mechanism of the 416 RA T-handle bitholding screwdriver is completely embedded in the handle. The compact shape of the tool allows convenient working. The change of direction can easily be made using the reversing lever. The ergonomically shaped 2-component T-handle with finger recesses and pleasant surface facilitates very high power transmission and fatigue-free working. The fast-rotating sleeve allows the tool to be guided safely while screwdriving and increases the working speed. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. ds: dsc: Scope of delivery 416 RA T-handle bitholding screwdriver with ratchet function and Rapidaptor quick-release chuck, 1/4" x 45 mm kts: T-handle bit holder with ratchet function and Rapidaptor quick-change function, 1/4" x 45 mm kpn: 416 RA kpn_dash: kpn_clear: 416RA bkpn: WERA 416 RA bkpn_clear: WERA 416RA c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Bit screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera bit screwdriver sr_no_br_cl_ns: 05023461001 sr_ns: WERA05023461001
r: 87010014 p: 9.19 pid: 72817 b: WERA q: 96 st: 1 lt: 1 ean: 4013288013828 sr: WERA 05059780001 sr_no_br: 05059780001 sr_no_br_cl: 05059780001 sr_cl: WERA05059780001 sr_dash: sold: 238.94 p_range: none type: standard act: 1 avo: 1 av: Length 110 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 n: WERA 851/4 Z PH bit Phillips, PH 2 x 110 mm - 05059780001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for Phillips screws. Tough, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For Phillips screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 851/4 Z bits, PH 2 x 110 mm kts: bit Phillips, PH 2 x 110 mm kpn: 851/4 Z PH kpn_dash: kpn_clear: 8514ZPH bkpn: WERA 851/4 Z PH bkpn_clear: WERA 8514ZPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059780001 sr_ns: WERA05059780001
r: 02059339 p: 11.83 pid: 42820 b: WERA q: 0 st: lt: 11 ean: 4013288031488 sr: WERA 05059453001 sr_no_br: 05059453001 sr_no_br_cl: 05059453001 sr_cl: WERA05059453001 sr_dash: sold: 236.6 p_range: none type: standard act: 1 avo: 1 av: Length 152 mm Blade thickness 1,2 mm Type of drive profile (bit) Slotted Connection size (bit) 1/4" VDE approved No Bit tip Slotted 6,5 mm Drive profile size (bit) 6,5 mm n: WERA 800/4 Z slotted screw bit, 1.2 x 6.5 x 152 mm - 05059453001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for slotted screws, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For slotted screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Slotted screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 800/4 Z bits, 1.2 x 6.5 x 152 mm kts: slotted screw bit, 1.2 x 6.5 x 152 mm kpn: 800/4 Z kpn_dash: kpn_clear: 8004Z bkpn: WERA 800/4 Z bkpn_clear: WERA 8004Z c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059453001 sr_ns: WERA05059453001
r: 08085383 p: 78.842 pid: 71208 b: WERA q: 0 st: lt: 8 ean: 4013288221841 sr: WERA 05004282001 sr_no_br: 05004282001 sr_no_br_cl: 05004282001 sr_cl: WERA05004282001 sr_dash: sold: 236.526 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Bit holder type Inner hexagon; Outer square VDE approved No With safety colour code 1000V ESD No Product Range Wera Zyklop n: WERA 8009 Zyklop Pocket Set Imperial 1 ratchet with integrated bit magazine 13-piece - 05004282001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Compact Zyklop ratchet with bit magazine for the pocket. Magnetic direct mounting for 1/4" bits and 3/8" sockets. Rapid tool change thanks to the non-locking mounting. As the head is lockable at 0°, 15° and 90°, the tool can be used as a ratchet and as a ratchet screwdriver. The fine toothing with 72 teeth allows for a low return angle of 5°. Wide range of applications thanks to 12 bits integrated in the handle. The robust ratchet mechanism allows for ample torque. Perfect combination of a Zyklop ratchet with a 12-piece screwdriver set. Compact Zyklop ratchet with integrated bit magazine The magnetic direct mounting simultaneously turns the 3/8" ratchet into a bit ratchet screwdriver with 1/4" bit mounting Freely pivoting ratchet head with 5 predefined locking positions Fine tooth reversible ratchet (72 teeth) for a low return angle of only 5° Captive and freely swivelling bit magazine for easy removal and secure storage of the bits 13-piece set; 1 Zyklop Pocket 8009 for 3/8" sockets as well as 3/8" connectors with square head drive; also suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 and Wera connection series 1 and 4. 3/8" ratchet and 1/4" bit ratchet screwdriver; freely swivelling ratchet head; pre-defined positions at 0°, 15° and 90° to the left and right; can be used as a conventional screwdriver in the 0° position; clockwise/counterclockwise switching, fine-toothed, small return angle of 5°; magnetic direct mounting. Multi-component Kraftform handle for fatigue-free working; captive, freely swivelling magazine with 12 bits integrated in the handle, 1/4", 25 mm length. Features and benefits Compact Zyklop ratchet with integrated bit magazine The magnetic direct mounting is suitable for 3/8" sockets as well as 1/4" bits without the need for an adapter. A captive, freely swivelling bit magazine for 12 bits (1/4", 25 mm length) is integrated in the handle of the compact Zyklop ratchet. The swivelling bit magazine allows for the bits to be removed easily in almost any situation and cannot be lost. The bits are safely stored. The ratchet head pivots freely and can be locked into any defined position by using the slide switch that is positioned on either side. It is even possible to work in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking at 0°, 15° and 90°, both to the right and left, ensure safe working without any slipping of the ratchet head. Thanks to the sliding switch on both sides, the ratchet head can be locked at the pre-defined positions 0° as well as 15° and 90° to the right and left. The fine toothing with 72 teeth allows for a low return angle of only 5° for working in constricted screwdriving situations. The Zyklop Pocket ratchet can be quickly and easily reversed for clockwise/anti-clockwise rotation in any position using the knurl. ds: dsc: Scope of delivery 8009 Zyklop Pocket Imperial Set 1, 13 pieces 1x 8009 Zyklop Pocket: 3/8" x 1/4" x 133 mm 2x 851/1 BTZ bits: PH 1x25 mm, PH 2x25 mm 4x 867/1 BTZ TORX® bits: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm 4x 840/1 Z bits: 1/8"x25 mm, 5/32"x25 mm, 3/16"x25 mm, 1/4"x25 mm 2x 868/1 Z Square-Plus bits: # 1x25 mm, # 2x25 mm kts: ratchet with integrated bit magazine 13-piece kpn: 8009 Zyklop Pocket Set Imperial 1 kpn_dash: kpn_clear: 8009ZyklopPocketSetImperial1 bkpn: WERA 8009 Zyklop Pocket Set Imperial 1 bkpn_clear: WERA 8009ZyklopPocketSetImperial1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05004282001 sr_ns: WERA05004282001
r: 02822805 p: 0.94 pid: 45512 b: WERA q: 18 st: 1 lt: 1 ean: 4013288014665 sr: WERA 05072082001 sr_no_br: 05072082001 sr_no_br_cl: 05072082001 sr_cl: WERA05072082001 sr_dash: sold: 235.94 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ2 n: WERA 855/1 Z PZ bit Pozidriv, PZ 2 x 25 mm - 05072082001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for Pozidriv screws. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. Suitable for Pozidriv screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 855/1 Z bits, PZ 2 x 25 mm kts: bit Pozidriv, PZ 2 x 25 mm kpn: 855/1 Z PZ kpn_dash: kpn_clear: 8551ZPZ bkpn: WERA 855/1 Z PZ bkpn_clear: WERA 8551ZPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05072082001 sr_ns: WERA05072082001
r: 02141364 p: 6.48 pid: 45741 b: WERA q: 3 st: 1 lt: 1 ean: 4013288031891 sr: WERA 05118006001 sr_no_br: 05118006001 sr_no_br_cl: 05118006001 sr_cl: WERA05118006001 sr_dash: sold: 233.28 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size Slotted 2 mm Blade length 60 mm Blade thickness 0,4 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted Product Range Wera Kraftform n: WERA 2035 Micro Kraftform saw cut screwdriver, 0.40 x 2 x 60 mm - 05118006001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for slotted screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Anti-roll feature and rotating cap for rapid twisting The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Application Slotted screws Blade Round Design Chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Indispensable for many users, including electronics technicians, opticians, precision engineers, jewellers, EDP hardware fitters and model-makers ds: dsc: Scope of delivery 2035 Screwdriver for slotted screws for electronic applications, 0.40 x 2 x 60 mm kts: Kraftform saw cut screwdriver, 0.40 x 2 x 60 mm kpn: 2035 Micro kpn_dash: kpn_clear: 2035Micro bkpn: WERA 2035 Micro bkpn_clear: WERA 2035Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118006001 sr_ns: WERA05118006001
r: 41070259 p: 12.066 pid: 72324 b: WERA q: 9 st: 1 lt: 1 ean: 4013288003102 sr: WERA 05110104001 sr_no_br: 05110104001 sr_no_br_cl: 05110104001 sr_cl: WERA05110104001 sr_dash: sold: 229.254 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 10 mm Blade length 200 mm Blade thickness 1,6 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 334 saw blade screwdriver, garage blade, 1.6 x 10 x 200 mm - 05110104001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform Plus handle for comfortable ergonomic screwdriving, avoiding blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head and unintentional slipping is a thing of the past. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Slotted screwdriver - workshop blade Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Application Slotted screws Blade Round Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component, sizes 2.0 x 12.0, 2.5 x 14.0: Kraftform with non-roll feature, single-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. ds: dsc: Scope of delivery 334 Screwdriver for slotted screws, 1.6 x 10 x 200 mm kts: saw blade screwdriver, garage blade, 1.6 x 10 x 200 mm kpn: 334 kpn_dash: kpn_clear: 334 bkpn: WERA 334 bkpn_clear: WERA 334 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05110104001 sr_ns: WERA05110104001
r: 41070205 p: 10.909 pid: 72305 b: WERA q: 5 st: 1 lt: 1 ean: 4013288027320 sr: WERA 05006156001 sr_no_br: 05006156001 sr_no_br_cl: 05006156001 sr_cl: WERA05006156001 sr_dash: sold: 229.089 p_range: none type: standard act: 1 avo: 1 av: Drive size PH3 Blade length 150 mm Blade thickness ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Phillips n: WERA 162 i PH VDE insulated Phillips screwdriver, PH 3 x 150 mm - 05006156001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera VDE screwdrivers with multi-component Kraftform handle for fast and smooth work: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head and unintentional slipping is a thing of the past. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Application Phillips screws Blade Insulated, individually tested as per IEC 60900 Design Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (red = Phillips) and size stamp. Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces - resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. ds: dsc: Scope of delivery 162 i PH VDE Insulated screwdriver for Phillips screws, PH 3 x 150 mm kts: insulated Phillips screwdriver, PH 3 x 150 mm kpn: 162 i PH VDE kpn_dash: kpn_clear: 162iPHVDE bkpn: WERA 162 i PH VDE bkpn_clear: WERA 162iPHVDE c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05006156001 sr_ns: WERA05006156001
r: 03229217 p: 32.727 pid: 71012 b: WERA q: 1 st: 1 lt: 1 ean: 4013288187888 sr: WERA 05057775001 sr_no_br: 05057775001 sr_no_br_cl: 05057775001 sr_cl: WERA05057775001 sr_dash: sold: 229.089 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 25 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T25 Quantity per box 15 n: WERA Bit-Box 15 Impaktor TX Bit-Box 15 Impaktor TX, TX 25 x 25 mm (15 pcs) - 05057775001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX® screws in a practical Bit-Box. The Impaktor technology ensures above-average service life even under very demanding circumstances. The enhanced friction resistance from the rough diamond-particle coating on the tip of the bit prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers; 1/4" hex, appropriate for holders as per DIN ISO 1173-D 6.3. Come with Take it easy tool finder: colour coding according to profile and size stamp. Impaktor technology for above-average service life Particularly suitable for use with customary impact drivers Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out 1/4" hexagon drive (Wera connecting series 1) Take it easy tool finder: colour coding according to profile and size Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design The Impaktor technology ensures an above-average service life even under extreme conditions thanks to a best-possible utilisation of the material properties and optimally designed geometry, particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance. Take it easy tool finder: Output colour coding (green = TORX®) and large stamp to enable the desired bit to be easily located. Features and benefits Impaktor technology for an above-average service life even under extreme demands The slide switch allows a simple and gradual removal and reinsertion of the bits. The transparent reverse side means that it is easy to know how many bits are still in the box. For an above-average service life. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Another product advantage is the coating of the Impaktor bits with minute diamond particles. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. For use with impact screwdrivers. Improve productivity when screwdriving with power tools. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Particularly high strength. Reduce the danger of premature bit breakage. Torsion zone specially designed to absorb such forces and thereby protect the bit tip. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. ds: dsc: Scope of delivery Bit-Box 15 Impaktor TX, TX 25 x 25 mm, 15 pieces 15x 867/1 IMP DC Impaktor TORX® bits: TX 25 x 25 mm kts: Bit-Box 15 Impaktor TX, TX 25 x 25 mm (15 pcs) kpn: Bit-Box 15 Impaktor TX kpn_dash: Bit kpn_clear: BitBox15ImpaktorTX bkpn: WERA Bit-Box 15 Impaktor TX bkpn_clear: WERA BitBox15ImpaktorTX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05057775001 sr_ns: WERA05057775001
r: 02835781 p: 32.561 pid: 41702 b: WERA q: 0 st: lt: 11 ean: 4013288184207 sr: WERA 05022745001 sr_no_br: 05022745001 sr_no_br_cl: 05022745001 sr_cl: WERA05022745001 sr_dash: sold: 227.927 p_range: none type: standard act: 1 avo: 1 av: VDE approved Yes With safety colour code 1000V No Quantity per set 7 n: WERA 3165 i/6 Rack screwdriver set stainless steel + holder, 6-piece - 05022745001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description High quality Kraftform Plus VDE screwdriver set out of stainless steel by Wera. The stainless tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. They can be used for industrial application without hesitation. The individual testing of the Kraftform Stainless VDE screwdrivers in a water bath at 10,000 volts as per DIN EN 60900 (IEC 60900) ensures safe working with voltages of up to 1,000 volts. Secure working is also ensured under extreme conditions and verified with the proven cold impact resistance at -40° C. Mainly with Lasertip: the Lasertip tip literally bites into the screw head and prevents any slipping out of the screw recess. Multi-component Kraftform handle for fast and low-fatigue working. Take it easy Tool Finder: colour coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Includes a practical rack for tidy storage of the screwdrivers. Insulated VDE stainless blades for secure work at 1,000 volts Multi-component Kraftform handle for high working speeds and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Conical blade, Lasertip tip, stainless to prevent extraneous rust Kraftform stainless: the safety screwdriver for stainless steel screws, Lasertip blade + rack. Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted and Pozidriv screws Contents Stainless steel, 6-piece set and rack in display carton Features and benefits Why are stainless elements so often affected by rust? One reason: screwdriving jobs are often carried out with a tool out of made from conventional steel which can result in extraneous rust forming. This is annoying. We were confident that this could be prevented by using tools likewise out of stainless steel and meeting the required standard of industrial hardness. A tool series out of stainless steel. The forming of extraneous rust is prevented and a special vacuum ice-hardening process ensures the required degree of hardness - and they are even VDE-tested, too. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 3165 i/6 Screwdriver set, stainless and rack, 6 pieces 2x 3165 i PZ VDE Insulated screwdriver for Pozidriv screws, stainless: PZ 1x80 mm, PZ 2x100 mm 4x 3160 i VDE Insulated screwdriver for slotted screws, stainless: 0.5x3x80 mm, 0.6x3.5x100 mm, 0.8x4x100 mm, 1x5.5x125 mm kts: screwdriver set stainless steel + holder, 6-piece kpn: 3165 i/6 Rack kpn_dash: kpn_clear: 3165i6Rack bkpn: WERA 3165 i/6 Rack bkpn_clear: WERA 3165i6Rack c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set sr_no_br_cl_ns: 05022745001 sr_ns: WERA05022745001
r: 02373022 p: 22.644 pid: 44275 b: WERA q: 0 st: lt: 9 ean: 4013288032560 sr: WERA 05005340001 sr_no_br: 05005340001 sr_no_br_cl: 05005340001 sr_cl: WERA05005340001 sr_dash: sold: 226.44 p_range: none type: standard act: 1 avo: 1 av: Width across flats 13 mm With safety colour code 1000V ESD No Handle type Screwdriver handle Overall length 237 mm Blade length 125 mm VDE approved Yes n: WERA 190I VDE insulated cap screwdriver 13.0 x 125 mm - 05005340001 cn: NUT DRIVER cn2: NUT DRIVER cn_clear: NUTDRIVER d: Product description Wera VDE socket wrenches with multi-component Kraftform for fast and low-fatigue working: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Individual testing at 10,000 volts so as to ensure safe working at the permitted voltage of 1,000 volts. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Insulated blades for secure work at 1,000 volts Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Zinc phosphate plated Application Hexagon headed bolts, screws and nuts Blade Insulated, individually inspected as per IEC 60900 Design Zinc-phosphated Handle Kraftform with non-roll feature, multi-component Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces - resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 190 i VDE Insulated nutdriver, 13 x 125 mm kts: VDE insulated cap screwdriver 13.0 x 125 mm kpn: 190I kpn_dash: kpn_clear: 190I bkpn: WERA 190I bkpn_clear: WERA 190I c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Nut driver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera nut driver sr_no_br_cl_ns: 05005340001 sr_ns: WERA05005340001
r: 02646683 p: 11.27 pid: 43692 b: WERA q: 0 st: lt: 12 ean: 4013288033130 sr: WERA 05066630001 sr_no_br: 05066630001 sr_no_br_cl: 05066630001 sr_cl: WERA05066630001 sr_dash: sold: 225.4 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Blade thickness Type of drive profile (bit) Torq-set Connection size (bit) 1/4" VDE approved No Bit tip Torq-set 8 Drive profile size (bit) 8 mm n: WERA 871/1 TORQ-SET Mplus 25 mm bit, 25 mm, 8 x 25 mm - 05066630001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for TORQ-SET® screws. The stronger flanks - when compared with the conventional TORQ-SET® profile - result in 70% more breaking torque and thereby enhanced durability whilst at the same time providing a perfect fit in the screw head. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For TORQ-SET® screws Mplus for more breaking torque and longer service life Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application TORQ-SET® screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Mplus for higher breaking torque and longer service life, tough, for universal use Features and benefits Wera developed the Mplus profile with stronger flanks compared with tools with a conventional TORQ-SET® profile. This results in approximately 70 % extra torsional strength and greatly extends the service life of Wera Mplus tools. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 871/1 TORQ-SET® Mplus bits, 25 mm, 8 x 25 mm kts: bit, 25 mm, 8 x 25 mm kpn: 871/1 TORQ-SET Mplus 25 mm kpn_dash: 871/1 TORQ kpn_clear: 8711TORQSETMplus25mm bkpn: WERA 871/1 TORQ-SET Mplus 25 mm bkpn_clear: WERA 8711TORQSETMplus25mm c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066630001 sr_ns: WERA05066630001
r: 02646675 p: 11.27 pid: 43683 b: WERA q: 0 st: lt: 12 ean: 4013288033086 sr: WERA 05066620001 sr_no_br: 05066620001 sr_no_br_cl: 05066620001 sr_cl: WERA05066620001 sr_dash: sold: 225.4 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Blade thickness Type of drive profile (bit) Torq-set Connection size (bit) 1/4" VDE approved No Bit tip Torq-set 2 Drive profile size (bit) 2 mm n: WERA 871/1 TORQ-SET Mplus 25 mm bit, 25 mm, 2 x 25 mm - 05066620001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for TORQ-SET® screws. The stronger flanks - when compared with the conventional TORQ-SET® profile - result in 70% more breaking torque and thereby enhanced durability whilst at the same time providing a perfect fit in the screw head. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For TORQ-SET® screws Mplus for more breaking torque and longer service life Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application TORQ-SET® screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Mplus for higher breaking torque and longer service life, tough, for universal use Features and benefits Wera developed the Mplus profile with stronger flanks compared with tools with a conventional TORQ-SET® profile. This results in approximately 70 % extra torsional strength and greatly extends the service life of Wera Mplus tools. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 871/1 TORQ-SET® Mplus bits, 25 mm, 2 x 25 mm kts: bit, 25 mm, 2 x 25 mm kpn: 871/1 TORQ-SET Mplus 25 mm kpn_dash: 871/1 TORQ kpn_clear: 8711TORQSETMplus25mm bkpn: WERA 871/1 TORQ-SET Mplus 25 mm bkpn_clear: WERA 8711TORQSETMplus25mm c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066620001 sr_ns: WERA05066620001
r: 02646685 p: 11.27 pid: 44604 b: WERA q: 0 st: lt: 12 ean: 4013288033147 sr: WERA 05066632001 sr_no_br: 05066632001 sr_no_br_cl: 05066632001 sr_cl: WERA05066632001 sr_dash: sold: 225.4 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Blade thickness Type of drive profile (bit) Torq-set Connection size (bit) 1/4" VDE approved No Bit tip Torq-set 10 Drive profile size (bit) 10 mm n: WERA 871/1 TORQ-SET Mplus 25 mm bit, 25 mm, 10 x 25 mm - 05066632001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for TORQ-SET® screws. The stronger flanks - when compared with the conventional TORQ-SET® profile - result in 70% more breaking torque and thereby enhanced durability whilst at the same time providing a perfect fit in the screw head. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For TORQ-SET® screws Mplus for more breaking torque and longer service life Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application TORQ-SET® screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Mplus for higher breaking torque and longer service life, tough, for universal use Features and benefits Wera developed the Mplus profile with stronger flanks compared with tools with a conventional TORQ-SET® profile. This results in approximately 70 % extra torsional strength and greatly extends the service life of Wera Mplus tools. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 871/1 TORQ-SET® Mplus bits, 25 mm, 10 x 25 mm kts: bit, 25 mm, 10 x 25 mm kpn: 871/1 TORQ-SET Mplus 25 mm kpn_dash: 871/1 TORQ kpn_clear: 8711TORQSETMplus25mm bkpn: WERA 871/1 TORQ-SET Mplus 25 mm bkpn_clear: WERA 8711TORQSETMplus25mm c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066632001 sr_ns: WERA05066632001
r: 02815724 p: 9.69 pid: 44268 b: WERA q: 0 st: lt: 12 ean: 4013288168313 sr: WERA 05135269001 sr_no_br: 05135269001 sr_no_br_cl: 05135269001 sr_cl: WERA05135269001 sr_dash: sold: 222.87 p_range: none type: standard act: 1 avo: 1 av: Length 44 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 4 mm Connection profile (bit) Halfmoon VDE approved No Bit tip HEX 2 mm Drive profile size (bit) 2 mm n: WERA 840/9 C hexagon bit, 2 x 44 mm - 05135269001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Hard bits for hexagon socket screws. Come with a Hex-Plus profile that prevents any rounding of the screw head. Drive: 4 mm halfmoon for direct power tool connection. For hexagonal socket head screws Tough for hard materials Hex-Plus allows socket head screws to live longer 4 mm halfmoon drive Application Hexagon socket screws Drive Halfmoon, 4 mm Design Hard Features and benefits Halfmoon, 4mm, Wera Series 9. Drive: For direct machine drive. Suitable for: Delvo, Densei etc. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! ds: dsc: Scope of delivery 840/9 C bits Hex-Plus, 2 x 44 mm kts: hexagon bit, 2 x 44 mm kpn: 840/9 C kpn_dash: kpn_clear: 8409C bkpn: WERA 840/9 C bkpn_clear: WERA 8409C c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05135269001 sr_ns: WERA05135269001
r: 02830525 p: 13.057 pid: 42411 b: WERA q: 0 st: lt: 11 ean: 4013288102645 sr: WERA 05006191001 sr_no_br: 05006191001 sr_no_br_cl: 05006191001 sr_cl: WERA05006191001 sr_dash: sold: 221.969 p_range: none type: standard act: 1 avo: 1 av: Drive size PZ/S 2 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Pozidriv/Slotted n: WERA 165 i PZ/S VDE insulated screwdriver for PlusMinus screws, square 2 x 100 mm - 05006191001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera VDE screwdriver with multi-component Kraftform Plus handle for fast and smooth work: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Combination profile slotted and Pozidriv*, especially for use with terminal strips, fuse boxes, switches, relays. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Combination profile - Pozidriv/slotted Application For PlusMinus screws (Pozidriv/slotted) Blade Insulated, individually tested as per IEC 60900 Design PlusMinus (Pozidriv/slotted) Handle Kraftform with non-roll feature, multi-component Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces - resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. ds: dsc: Scope of delivery 165 i PZ/S VDE Insulated screwdriver for PlusMinus screws (Pozidriv/slotted), # 2 x 100 mm kts: insulated screwdriver for PlusMinus screws, square 2 x 100 mm kpn: 165 i PZ/S VDE kpn_dash: kpn_clear: 165iPZSVDE bkpn: WERA 165 i PZ/S VDE bkpn_clear: WERA 165iPZSVDE c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05006191001 sr_ns: WERA05006191001
