r: 02787431 p: 3.17 pid: 45993 b: WERA q: 0 st: lt: 12 ean: 4013288034250 sr: WERA 05056412001 sr_no_br: 05056412001 sr_no_br_cl: 05056412001 sr_cl: WERA05056412001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 n: WERA 851/1 BTH PH bit Phillips, PH 2 x 25 mm - 05056412001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for Phillips screws with Torsion zone where kinetic energy is diverted from peak loads. This greatly extends the product service life. Extra-hard design, 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For Phillips screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Particularly hard for semi-hard materials 1/4" hexagon drive (Wera connecting series 1) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design BiTorsion for long service life, extra-hard. Take it easy tool finder: Output colour coding (red = Phillips) and large stamp to enable the desired bit to be easily located. Features and benefits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. The BiTorsion holder and the BiTorsion bit can, of course, be used independently of one another. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 851/1 BTH bits, PH 2 x 25 mm kts: bit Phillips, PH 2 x 25 mm kpn: 851/1 BTH PH kpn_dash: kpn_clear: 8511BTHPH bkpn: WERA 851/1 BTH PH bkpn_clear: WERA 8511BTHPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056412001 sr_ns: WERA05056412001
r: 02822835 p: 3.17 pid: 45102 b: WERA q: 0 st: lt: 6 ean: 4013288034502 sr: WERA 05056724001 sr_no_br: 05056724001 sr_no_br_cl: 05056724001 sr_cl: WERA05056724001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 3 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ3 n: WERA 855/1 BTZ PZ bit Pozidriv, PZ 3 x 25 mm - 05056724001 cn: BIT cn2: BIT cn_clear: BIT d: Product description BiTorsion bits for Pozidriv* screws with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Extra-hard design. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. * Pozidriv = registered trademark of the company European Industrial Service Ltd. Suitable for Pozidriv screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design BiTorsion for long service life, extra-tough, for universal use. Take it easy tool finder: Output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located. Features and benefits BTZ-Bits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 855/1 BTZ bits, PZ 3 x 25 mm kts: bit Pozidriv, PZ 3 x 25 mm kpn: 855/1 BTZ PZ kpn_dash: kpn_clear: 8551BTZPZ bkpn: WERA 855/1 BTZ PZ bkpn_clear: WERA 8551BTZPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056724001 sr_ns: WERA05056724001
r: 02818375 p: 3.1 pid: 46721 b: WERA q: 0 st: lt: 6 ean: 4013288112576 sr: WERA 05135041001 sr_no_br: 05135041001 sr_no_br_cl: 05135041001 sr_cl: WERA05135041001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" Connection profile (bit) Hexagonal VDE approved No Bit tip PH0 Drive profile size (bit) 0 n: WERA 851/1 J bit Phillips, PH 0 x 25 x 2.5 mm - 05135041001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for Phillips screws, optimised for Asian PH screws. Similar to JCIS 8-70. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For Phillips screws Optimised for Japanese Phillips screws Tough for hard materials Prevents premature breakage of the drive tip 1/4" hexagon drive (Wera connecting series 1) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits J stands for Japan. J bits have been optimised to suit Asian PH screws. In particular, they are for use with very small dimensions as set out in the Japanese Camera Standard. ds: dsc: Scope of delivery 851/1 J bits, PH 0 x 25 x 2.5 mm kts: bit Phillips, PH 0 x 25 x 2.5 mm kpn: 851/1 J kpn_dash: kpn_clear: 8511J bkpn: WERA 851/1 J bkpn_clear: WERA 8511J c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05135041001 sr_ns: WERA05135041001
r: 02818374 p: 3.1 pid: 45391 b: WERA q: 0 st: lt: 6 ean: 4013288112569 sr: WERA 05135040001 sr_no_br: 05135040001 sr_no_br_cl: 05135040001 sr_cl: WERA05135040001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 00 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH00 n: WERA 851/1 J bit Phillips, PH 00 x 25 x 2 mm - 05135040001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for Phillips screws, optimised for Asian PH screws. Similar to Camera screws. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For Phillips screws Optimised for Japanese Phillips screws Tough for hard materials Prevents premature breakage of the drive tip 1/4" hexagon drive (Wera connecting series 1) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits J stands for Japan. J bits have been optimised to suit Asian PH screws. In particular, they are for use with very small dimensions as set out in the Japanese Camera Standard. ds: dsc: Scope of delivery 851/1 J bits, PH 00 x 25 x 2 mm kts: bit Phillips, PH 00 x 25 x 2 mm kpn: 851/1 J kpn_dash: kpn_clear: 8511J bkpn: WERA 851/1 J bkpn_clear: WERA 8511J c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05135040001 sr_ns: WERA05135040001
r: 02822818 p: 2.95 pid: 45517 b: WERA q: 0 st: lt: 12 ean: 4013288029119 sr: WERA 05073310001 sr_no_br: 05073310001 sr_no_br_cl: 05073310001 sr_cl: WERA05073310001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 3 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ3 Number per blister 2 n: WERA 855/1 Z SB SiS bit Pozidriv, PZ 3 x 25 mm (2 pcs) - 05073310001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for Pozidriv screws. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. Suitable for Pozidriv screws Tough for hard materials In practical 2-piece set 1/4" hexagon drive (Wera connecting series 1) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 855/1 Z SB bits, PZ 3 x 25 mm, 2 pieces 2x 855/1 Z bits: PZ 3 x 25 mm kts: bit Pozidriv, PZ 3 x 25 mm (2 pcs) kpn: 855/1 Z SB SiS kpn_dash: kpn_clear: 8551ZSBSiS bkpn: WERA 855/1 Z SB SiS bkpn_clear: WERA 8551ZSBSiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073310001 sr_ns: WERA05073310001
r: 02822817 p: 2.95 pid: 45086 b: WERA q: 0 st: lt: 12 ean: 4013288029102 sr: WERA 05073309001 sr_no_br: 05073309001 sr_no_br_cl: 05073309001 sr_cl: WERA05073309001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ2 Number per blister 2 n: WERA 855/1 Z SB SiS bit Pozidriv, PZ 2 x 25 mm (2 pcs) - 05073309001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for Pozidriv screws. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. Suitable for Pozidriv screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) In practical 2-piece set Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 855/1 Z SB bits, PZ 2 x 25 mm, 2 pieces 2x 855/1 Z bits: PZ 2 x 25 mm kts: bit Pozidriv, PZ 2 x 25 mm (2 pcs) kpn: 855/1 Z SB SiS kpn_dash: kpn_clear: 8551ZSBSiS bkpn: WERA 855/1 Z SB SiS bkpn_clear: WERA 8551ZSBSiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073309001 sr_ns: WERA05073309001
r: 02818420 p: 2.95 pid: 45005 b: WERA q: 0 st: lt: 12 ean: 4013288029072 sr: WERA 05073306001 sr_no_br: 05073306001 sr_no_br_cl: 05073306001 sr_cl: WERA05073306001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 3 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH3 Number per blister 2 n: WERA 851/1 Z SB SiS bit Phillips, PH 3 x 25 mm (2 pcs) - 05073306001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough viscous Wera bits for hexagon socket screws and universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For Phillips screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) In practical 2-piece set Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 851/1 Z SB bits, PH 3 x 25 mm, 2 pieces 2x 851/1 Z bits: PH 3 x 25 mm kts: bit Phillips, PH 3 x 25 mm (2 pcs) kpn: 851/1 Z SB SiS kpn_dash: kpn_clear: 8511ZSBSiS bkpn: WERA 851/1 Z SB SiS bkpn_clear: WERA 8511ZSBSiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073306001 sr_ns: WERA05073306001
r: 02818417 p: 2.95 pid: 45408 b: WERA q: 0 st: lt: 12 ean: 4013288029058 sr: WERA 05073304001 sr_no_br: 05073304001 sr_no_br_cl: 05073304001 sr_cl: WERA05073304001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH1 Number per blister 2 n: WERA 851/1 Z SB SiS bit Phillips, PH 1 x 25 mm (2 pcs) - 05073304001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough viscous Wera bits for hexagon socket screws and universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For Phillips screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) In practical 2-piece set Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 851/1 Z SB bits, PH 1 x 25 mm, 2 pieces 2x 851/1 Z bits: PH 1 x 25 mm kts: bit Phillips, PH 1 x 25 mm (2 pcs) kpn: 851/1 Z SB SiS kpn_dash: kpn_clear: 8511ZSBSiS bkpn: WERA 851/1 Z SB SiS bkpn_clear: WERA 8511ZSBSiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073304001 sr_ns: WERA05073304001
r: 87010135 p: 2.79 pid: 72851 b: WERA q: 0 st: lt: 13 ean: 4013288015723 sr: WERA 05066302001 sr_no_br: 05066302001 sr_no_br_cl: 05066302001 sr_cl: WERA05066302001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 7 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T7 n: WERA 867/1 TZ TORX bit, TX 7 x 25 mm - 05066302001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For recessed TORX® screws Torsion design against premature wear Prevents premature breakage of the drive tip Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Torsion-style design to reduce premature wear, tough, for universal use Features and benefits TZ-Bits are tough bits with a torsion zone. Torsion bits absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/1 TZ TORX® bits, TX 7 x 25 mm kts: bit, TX 7 x 25 mm kpn: 867/1 TZ TORX kpn_dash: kpn_clear: 8671TZTORX bkpn: WERA 867/1 TZ TORX bkpn_clear: WERA 8671TZTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066302001 sr_ns: WERA05066302001
r: 87010136 p: 2.79 pid: 71490 b: WERA q: 0 st: lt: 11 ean: 4013288015730 sr: WERA 05066303001 sr_no_br: 05066303001 sr_no_br_cl: 05066303001 sr_cl: WERA05066303001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 8 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T8 n: WERA 867/1 TZ TORX bit, TX 8 x 25 mm - 05066303001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For recessed TORX® screws Torsion design against premature wear Prevents premature breakage of the drive tip Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Torsion-style design to reduce premature wear, tough, for universal use Features and benefits TZ-Bits are tough bits with a torsion zone. Torsion bits absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/1 TZ TORX® bits, TX 8 x 25 mm kts: bit, TX 8 x 25 mm kpn: 867/1 TZ TORX kpn_dash: kpn_clear: 8671TZTORX bkpn: WERA 867/1 TZ TORX bkpn_clear: WERA 8671TZTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066303001 sr_ns: WERA05066303001
r: 87010138 p: 2.79 pid: 70924 b: WERA q: 0 st: lt: 12 ean: 4013288015792 sr: WERA 05066313001 sr_no_br: 05066313001 sr_no_br_cl: 05066313001 sr_cl: WERA05066313001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 27 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T27 n: WERA 867/1 TZ TORX bit, TX 27 x 25 mm - 05066313001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For recessed TORX® screws Torsion design against premature wear Prevents premature breakage of the drive tip Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Torsion-style design to reduce premature wear, tough, for universal use Features and benefits TZ-Bits are tough bits with a torsion zone. Torsion bits absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/1 TZ TORX® bits, TX 27 x 25 mm kts: bit, TX 27 x 25 mm kpn: 867/1 TZ TORX kpn_dash: kpn_clear: 8671TZTORX bkpn: WERA 867/1 TZ TORX bkpn_clear: WERA 8671TZTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066313001 sr_ns: WERA05066313001
r: 87010133 p: 2.79 pid: 70921 b: WERA q: 0 st: lt: 16 ean: 4013288015709 sr: WERA 05066300001 sr_no_br: 05066300001 sr_no_br_cl: 05066300001 sr_cl: WERA05066300001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 5 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T5 n: WERA 867/1 TZ TORX bit, TX 5 x 25 mm - 05066300001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For recessed TORX® screws Torsion design against premature wear Prevents premature breakage of the drive tip Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Torsion-style design to reduce premature wear, tough, for universal use Features and benefits TZ-Bits are tough bits with a torsion zone. Torsion bits absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/1 TZ TORX® bits, TX 5 x 25 mm kts: bit, TX 5 x 25 mm kpn: 867/1 TZ TORX kpn_dash: kpn_clear: 8671TZTORX bkpn: WERA 867/1 TZ TORX bkpn_clear: WERA 8671TZTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066300001 sr_ns: WERA05066300001
r: 02317730 p: 2.05 pid: 45794 b: WERA q: 5 st: 1 lt: 1 ean: 4013288041005 sr: WERA 05480173001 sr_no_br: 05480173001 sr_no_br_cl: 05480173001 sr_cl: WERA05480173001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 3 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH3 n: WERA 851/1 TIN bit Phillips, PH 3 x 25 mm - 05480173001 cn: BIT cn2: BIT cn_clear: BIT d: Product description: High-quality bits for Phillips screws Extremely hard titanium-nitride (TiN) coating for continuous loading as in serial screwing 1/4" hexagon, fitting in holders according to DIN ISO 1173-D 6.3 Features: For Phillips Phillips head TiN-coated for required strength, e.g. for serial screwing 1/4" hexagonal drive (Wera connection series 1) Suitable for Bosch, Fein, Holz-Her, Lecreux, Metabo Application: Phillips Phillips head Drive: 1/4" Hexagon, suitable for holder in accordance with DIN ISO 1173-D 6.3 Design: Extremely hard TiN coating for permanent loading, such as for series screws ds: dsc: Scope of delivery 851/1 TIN Bits Phillips, PH 3 x 25 mm kts: bit Phillips, PH 3 x 25 mm kpn: 851/1 TIN kpn_dash: kpn_clear: 8511TIN bkpn: WERA 851/1 TIN bkpn_clear: WERA 8511TIN c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05480173001 sr_ns: WERA05480173001
r: 08131784 p: 2.04 pid: 173558 b: WERA q: 0 st: lt: 8 ean: 4013288234537 sr: WERA 05058108001 sr_no_br: 05058108001 sr_no_br_cl: 05058108001 sr_cl: WERA05058108001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 30 mm Blade thickness Type of drive profile (bit) Hexagon Plus Connection size (bit) 4 mm VDE approved No Bit tip HEX-Plus 0,9 mm Drive profile size (bit) 0,9 mm Product Range Wera Hex-Plus n: WERA 840 Micro Hex-Plus bit 0.9 x 30 mm - 05058108001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Bits for hexagonal socket screws. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw head is almost eliminated. Tough, for universal use. 4 mm hexagonal. For hexagonal socket head screws With Hex-Plus profile (prevents rounding-out of hexagonal socket screws) Tough for hard materials 4 mm hexagonal drive Application Hexagonal socket screws Drive 4 mm hexagonal Design Hex-Plus, tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/0 Hex-Plus Micro bits for hexagonal socket head screws, 0.9 x 30 mm kts: Hex-Plus bit 0.9 x 30 mm kpn: 840 Micro kpn_dash: kpn_clear: 840Micro bkpn: WERA 840 Micro bkpn_clear: WERA 840Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05058108001 sr_ns: WERA05058108001
r: 08131788 p: 2.04 pid: 173584 b: WERA q: 0 st: lt: 8 ean: 4013288234551 sr: WERA 05058112001 sr_no_br: 05058112001 sr_no_br_cl: 05058112001 sr_cl: WERA05058112001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 30 mm Blade thickness Type of drive profile (bit) Hexagon Plus Connection size (bit) 4 mm VDE approved No Bit tip HEX-Plus 2,5 mm Drive profile size (bit) 2,5 mm Product Range Wera Hex-Plus n: WERA 840 Micro Hex-Plus bit 2.5 x 30 mm - 05058112001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Bits for hexagonal socket screws. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw head is almost eliminated. Tough, for universal use. 4 mm hexagonal. For hexagonal socket head screws With Hex-Plus profile (prevents rounding-out of hexagonal socket screws) Tough for hard materials 4 mm hexagonal drive Application Hexagonal socket screws Drive 4 mm hexagonal Design Hex-Plus, tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/0 Hex-Plus Micro bits for hexagonal socket head screws, 2.5 x 30 mm kts: Hex-Plus bit 2.5 x 30 mm kpn: 840 Micro kpn_dash: kpn_clear: 840Micro bkpn: WERA 840 Micro bkpn_clear: WERA 840Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05058112001 sr_ns: WERA05058112001
r: 08131783 p: 2.04 pid: 173553 b: WERA q: 0 st: lt: 8 ean: 4013288234612 sr: WERA 05058141001 sr_no_br: 05058141001 sr_no_br_cl: 05058141001 sr_cl: WERA05058141001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 30 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 4 mm VDE approved No Bit tip PZ1 n: WERA 855 Micro bit PZ 1 x 30 mm - 05058141001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for Pozidriv screws. Tough, for universal use. 4 mm hexagonal. Suitable for Pozidriv screws Tough for hard materials 4 mm hexagonal drive Application Suitable for Pozidriv screws Drive 4 mm hexagonal Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 855/0 Micro bits suitable for Pozidriv screws, PZ 1 x 30 mm kts: bit PZ 1 x 30 mm kpn: 855 Micro kpn_dash: kpn_clear: 855Micro bkpn: WERA 855 Micro bkpn_clear: WERA 855Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05058141001 sr_ns: WERA05058141001
r: 08131798 p: 2.04 pid: 173552 b: WERA q: 0 st: lt: 8 ean: 4013288234575 sr: WERA 05058122001 sr_no_br: 05058122001 sr_no_br_cl: 05058122001 sr_cl: WERA05058122001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 30 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 4 mm VDE approved No Bit tip PH1 n: WERA 851 Micro bit PH 1 x 30 mm - 05058122001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for Phillips screws. Tough, for universal use. 4 mm hexagonal. For Phillips screws Tough for hard materials 4 mm hexagonal drive Application Phillips-head screws Phillips-Recess Drive 4 mm hexagonal Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 851/0 Micro bits for Phillips screws, PH 1 x 30 mm kts: bit PH 1 x 30 mm kpn: 851 Micro kpn_dash: kpn_clear: 851Micro bkpn: WERA 851 Micro bkpn_clear: WERA 851Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05058122001 sr_ns: WERA05058122001
r: 08131787 p: 2.04 pid: 173557 b: WERA q: 0 st: lt: 8 ean: 4013288189615 sr: WERA 05058111001 sr_no_br: 05058111001 sr_no_br_cl: 05058111001 sr_cl: WERA05058111001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 30 mm Blade thickness Type of drive profile (bit) Hexagon Plus Connection size (bit) 4 mm VDE approved No Bit tip HEX-Plus 2 mm Drive profile size (bit) 2 mm Product Range Wera Hex-Plus n: WERA 840 Micro Hex-Plus bit 2.0 x 30 mm - 05058111001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Bits for hexagonal socket screws. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw head is almost eliminated. Tough, for universal use. 4 mm hexagonal. For hexagonal socket head screws With Hex-Plus profile (prevents rounding-out of hexagonal socket screws) Tough for hard materials 4 mm hexagonal drive Application Hexagonal socket screws Drive 4 mm hexagonal Design Hex-Plus, tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/0 Hex-Plus Micro bits for hexagonal socket head screws, 2 x 30 mm kts: Hex-Plus bit 2.0 x 30 mm kpn: 840 Micro kpn_dash: kpn_clear: 840Micro bkpn: WERA 840 Micro bkpn_clear: WERA 840Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05058111001 sr_ns: WERA05058111001
r: 08131785 p: 2.04 pid: 173554 b: WERA q: 0 st: lt: 8 ean: 4013288234544 sr: WERA 05058109001 sr_no_br: 05058109001 sr_no_br_cl: 05058109001 sr_cl: WERA05058109001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 30 mm Blade thickness Type of drive profile (bit) Hexagon Plus Connection size (bit) 4 mm VDE approved No Bit tip HEX-Plus 1,3 mm Drive profile size (bit) 1,3 mm Product Range Wera Hex-Plus n: WERA 840 Micro Hex-Plus bit 1.3 x 30 mm - 05058109001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Bits for hexagonal socket screws. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw head is almost eliminated. Tough, for universal use. 4 mm hexagonal. For hexagonal socket head screws With Hex-Plus profile (prevents rounding-out of hexagonal socket screws) Tough for hard materials 4 mm hexagonal drive Application Hexagonal socket screws Drive 4 mm hexagonal Design Hex-Plus, tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/0 Hex-Plus Micro bits for hexagonal socket head screws, 1.3 x 30 mm kts: Hex-Plus bit 1.3 x 30 mm kpn: 840 Micro kpn_dash: kpn_clear: 840Micro bkpn: WERA 840 Micro bkpn_clear: WERA 840Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05058109001 sr_ns: WERA05058109001
r: 08131796 p: 2.04 pid: 173562 b: WERA q: 0 st: lt: 8 ean: 4013288234568 sr: WERA 05058119001 sr_no_br: 05058119001 sr_no_br_cl: 05058119001 sr_cl: WERA05058119001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 30 mm Drive profile size (bit) 000 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 4 mm VDE approved No Bit tip PH000 n: WERA 851 Micro bit PH 000 x 30 mm - 05058119001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for Phillips screws. Tough, for universal use. 4 mm hexagonal. For Phillips screws Tough for hard materials 4 mm hexagonal drive Application Phillips-head screws Phillips-Recess Drive 4 mm hexagonal Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 851/0 Micro bits for Phillips screws, PH 000 x 30 mm kts: bit PH 000 x 30 mm kpn: 851 Micro kpn_dash: kpn_clear: 851Micro bkpn: WERA 851 Micro bkpn_clear: WERA 851Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05058119001 sr_ns: WERA05058119001
