r: 02830543 p: 14.545 pid: 44617 b: WERA q: 0 st: lt: 12 ean: 4013288181558 sr: WERA 05100026001 sr_no_br: 05100026001 sr_no_br_cl: 05100026001 sr_cl: WERA05100026001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size #3 Drive type Square Blade length 150 mm Blade thickness ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No n: WERA 168 i SB VDE insulated screwdriver for inside square, square 3 x 150 mm - 05100026001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera VDE screwdrivers with multi-component Kraftform Plus handle for fast and low-fatigue working: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Individually tested in water bath at 10,000 volts for secure work at the permissible voltage of 1,000 volts. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Square socket head screws Blade Insulated, individually tested as per IEC 60900 Design Zinc-phosphated Handle Kraftform with non-roll feature, multi-component Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces - resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 168 i SB VDE Insulated screwdriver for square socket head screws, # 3 x 150 mm kts: VDE insulated screwdriver for inside square, square 3 x 150 mm kpn: 168 i SB kpn_dash: kpn_clear: 168iSB bkpn: WERA 168 i SB bkpn_clear: WERA 168iSB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05100026001 sr_ns: WERA05100026001
r: 41071194 p: 13.057 pid: 71816 b: WERA q: 0 st: lt: 12 ean: 4013288108081 sr: WERA 05007675001 sr_no_br: 05007675001 sr_no_br_cl: 05007675001 sr_cl: WERA05007675001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 7 mm Blade length 125 mm Blade thickness 1,2 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 334 SK saw blade screwdriver, hexagonal key blade, 1.2 x 7 x 125 mm - 05007675001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdrivers with hexagonal blades. Multi-component Kraftform Plus handle. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Lasertip tips: microscopically roughened surface which bites firmly into the screw head. This means less slipping and less contact pressure being required. Comes with bolster to enable higher torque to be applied. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdriver for slotted screws Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal blade and bolster for higher torque transfer Lasertip tips for more secure fit in the screw head Application Slotted screws Blade Hexagonal with bolster from 0.8 x 4.5 Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Hexagonal blade and bolster for higher torque transfer. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery 334 SK Screwdriver for slotted screws, 1.2 x 7 x 125 mm kts: saw blade screwdriver, hexagonal key blade, 1.2 x 7 x 125 mm kpn: 334 SK kpn_dash: kpn_clear: 334SK bkpn: WERA 334 SK bkpn_clear: WERA 334SK c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05007675001 sr_ns: WERA05007675001
r: 41071165 p: 12.561 pid: 70680 b: WERA q: 0 st: lt: 13 ean: 4013288040909 sr: WERA 05004782001 sr_no_br: 05004782001 sr_no_br_cl: 05004782001 sr_cl: WERA05004782001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size #3 Blade length 150 mm Blade thickness ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Square n: WERA 168 i VDE insulated screwdriver for inside square, square 3 x 150 mm - 05004782001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera VDE screwdriver with multi-component Kraftform handle for fast and smooth work: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Colour-coded. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Zinc phosphate plated Application Square socket head screws Blade Insulated, individually tested as per IEC 60900 Design Zinc-phosphated Handle Kraftform with non-roll feature, multi-component Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces - resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 168 i VDE Insulated screwdriver for square socket head screws, # 3 x 150 mm kts: insulated screwdriver for inside square, square 3 x 150 mm kpn: 168 i VDE kpn_dash: kpn_clear: 168iVDE bkpn: WERA 168 i VDE bkpn_clear: WERA 168iVDE c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05004782001 sr_ns: WERA05004782001
r: 08131757 p: 12.231 pid: 173544 b: WERA q: 0 st: lt: 8 ean: 4013288222688 sr: WERA 05007901001 sr_no_br: 05007901001 sr_no_br_cl: 05007901001 sr_cl: WERA05007901001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size Slotted 6 mm Blade length 150 mm Blade thickness 1 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted Product Range Wera Kraftform n: WERA 1834 Kraftform Ball-Grip slotted screwdriver - workshop handle, 1 x 6 x 150 mm - 05007901001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Screwdriver with Kraftform series 1800 handle for slotted screws. The handle fits perfectly in the hand. The convex shape allows the transmission of high torques. The soft handle zones ensure a good grip and low-loss power transmission. The hard handle zones allow a high power transmission, even when pressure is applied with the ball of the hand. The recesses at the upper end of the handle facilitate fine adjustment while screwdriving. Due to the narrow transition between handle and blade, even sunken screws in narrow areas can be easily reached. The anti-roll protection at the rear end of the handle hinders the tool from rolling away annoyingly at the workplace. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head which avoids unintentional slipping out of the screw. Slotted screwdriver - workshop blade Kraftform series 1800 handle for high torques Soft handle zones for high power transmission Hard handle zones for palm pressure Handle recesses for your fingers allow fine adjustment Application Slotted screws Blade Round Design Nicro matt, Lasertip Handle Kraftform Ball-Grip with anti-roll protection, multi-component. With Take it easy tool finder: Colour coding by profile (yellow = slotted) and size stamping. Features and benefits It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The ergonomically shaped Kraftform Ball-Grip fits perfectly in the hand. Its convex shape allows the transmission of high torque transfer. The material used for the soft zones of the Kraftform Ball-Grip handle ensures a good grip and low-loss power transmission. The hard handle zones of the Kraftform Ball-Grip allow high power transmission, even when pressure is applied with the ball of the hand. The recesses at the upper end of the Kraftform Ball-Grip allow fine adjustment while screwdriving. Due to the narrow transition between handle and blade, even sunken screws in narrow areas can be easily reached. ds: dsc: Scope of delivery 1834 Kraftform Ball-Grip Slotted screwdriver - workshop blade, 1 x 6 x 150 mm kts: Kraftform Ball-Grip slotted screwdriver - workshop handle, 1 x 6 x 150 mm kpn: 1834 kpn_dash: kpn_clear: 1834 bkpn: WERA 1834 bkpn_clear: WERA 1834 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05007901001 sr_ns: WERA05007901001
r: 08131802 p: 12.231 pid: 173627 b: WERA q: 0 st: lt: 8 ean: 4013288222701 sr: WERA 05007907001 sr_no_br: 05007907001 sr_no_br_cl: 05007907001 sr_cl: WERA05007907001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size PH2 Blade length 150 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Phillips Product Range Wera Kraftform n: WERA 1850 PH Kraftform Ball-Grip cross-head screwdriver - Workplace King, PH 2 x 150 mm - 05007907001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Screwdriver with Kraftform handle series 1800 for Phillips-head screws. The handle fits perfectly in the hand. The convex shape allows the transmission of high torques. The soft handle zones ensure a good grip and low-loss power transmission. The hard handle zones allow a high power transmission, even when pressure is applied with the ball of the hand. The recesses at the upper end of the handle facilitate fine adjustment while screwdriving. Due to the narrow transition between handle and blade, even sunken screws in narrow areas can be easily reached. The anti-roll protection at the rear end of the handle hinders the tool from rolling away annoyingly at the workplace. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head which avoids unintentional slipping out of the screw. Screwdriver for cross-recess screws, Phillips Kraftform series 1800 handle for high torques Soft handle zones for high power transmission Hard handle zones for palm pressure Handle recesses for your fingers allow fine adjustment Application Phillips-head screws Phillips-Recess Blade Round Design Nicro matt, Lasertip Handle Kraftform Ball-Grip with anti-roll protection, multi-component. With Take it easy tool finder: Colour coding by profile (red = Phillips) and size stamping. Features and benefits It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The ergonomically shaped Kraftform Ball-Grip fits perfectly in the hand. Its convex shape allows the transmission of high torque transfer. The material used for the soft zones of the Kraftform Ball-Grip handle ensures a good grip and low-loss power transmission. The hard handle zones of the Kraftform Ball-Grip allow high power transmission, even when pressure is applied with the ball of the hand. The recesses at the upper end of the Kraftform Ball-Grip allow fine adjustment while screwdriving. Due to the narrow transition between handle and blade, even sunken screws in narrow areas can be easily reached. ds: dsc: Scope of delivery 1850 PH Kraftform Ball-Grip Phillips-head screwdriver, PH 2 x 150 mm kts: Kraftform Ball-Grip cross-head screwdriver - Workplace King, PH 2 x 150 mm kpn: 1850 PH kpn_dash: kpn_clear: 1850PH bkpn: WERA 1850 PH bkpn_clear: WERA 1850PH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05007907001 sr_ns: WERA05007907001
r: 02125907 p: 11.97 pid: 44436 b: WERA q: 0 st: lt: 8 ean: 4013288032034 sr: WERA 05118098001 sr_no_br: 05118098001 sr_no_br_cl: 05118098001 sr_cl: WERA05118098001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size HEX 1/16" Blade length 60 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Ball-end hexagon Product Range Wera Kraftform n: WERA 2052 Micro Kraftform hexagonal ball head screwdriver, 1/16" x 60 mm - 05118098001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Wera Micro screwdriver for precision mechanical work. Ballpoint profile: the ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. Rapid twisting is possible by fixing the hand on the twist cap and using the fast-turning zone just below it. This makes time-consuming grip adjustments unnecessary. Power zone with integrated soft zones ensure the transfer of higher tightening and loosening torque. Precision zone for the right angle for adjustment work. The Wera Black Point tip offers high corrosion protection and an exact fit. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. Kraftform Micro screwdriver with ballpoint for hexagon socket screws Multi-component Kraftform Micro handle with anti-roll feature and rotating cap The Wera Black Point tip offers an exact fit and optimum corrosion protection Ballpoint for dependable working even in difficult installation situations Take it easy tool finder: colour coding according to profile and size Application Hexagon socket screws Blade Round Design Hexagon ball end, chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (blue = hexagon) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Multi-component screwdriver handle for ergonomic working. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2052 Ball end hexagon screwdriver for electronic applications, 1/16" x 60 mm kts: Kraftform hexagonal ball head screwdriver, 1/16" x 60 mm kpn: 2052 Micro kpn_dash: kpn_clear: 2052Micro bkpn: WERA 2052 Micro bkpn_clear: WERA 2052Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118098001 sr_ns: WERA05118098001
r: 02831669 p: 11.404 pid: 44651 b: WERA q: 0 st: lt: 12 ean: 4013288138385 sr: WERA 05028073001 sr_no_br: 05028073001 sr_no_br_cl: 05028073001 sr_cl: WERA05028073001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size T30 Blade length 300 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx n: WERA 367 TORX HF screwdriver with holding function, TX 30 x 300 mm - 05028073001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. With holding function: The clamping force resulting from the seating stress between the tip and the screw profile keeps the screws securely on the tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Handles marked for easy identification and sorting of tools. Screwdriver for recessed TORX® screws Holding function for TORX® screws Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Application TORX® socket screws Blade Round Design Holding function for TORX® screws made according to Acument Intellectual Properties specifications, chrome-plated Handle Kraftform with non-roll feature, multi-component Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. ds: dsc: Scope of delivery 367 TORX® HF Screwdriver with holding function for TORX® screws, TX 30 x 300 mm kts: screwdriver with holding function, TX 30 x 300 mm kpn: 367 TORX HF kpn_dash: kpn_clear: 367TORXHF bkpn: WERA 367 TORX HF bkpn_clear: WERA 367TORXHF c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05028073001 sr_ns: WERA05028073001
r: 03226624 p: 11.074 pid: 71455 b: WERA q: 0 st: lt: 8 ean: 4013288186560 sr: WERA 05100019001 sr_no_br: 05100019001 sr_no_br_cl: 05100019001 sr_cl: WERA05100019001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size PH/S 1 Drive type Phillips/Slotted Blade length 80 mm Blade thickness ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No n: WERA 162 i PH/S SB VDE insulated screwdriver for PlusMinus screws, square 1 x 80 mm - 05100019001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera VDE screwdrivers with multi-component Kraftform Plus handle for fast and low-fatigue working: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Combination profile - slotted and Phillips particularly for jobs on terminal blocks, fuse boxes, switches and relays. Individually tested in water bath at 10,000 volts for secure work at the permissible voltage of 1,000 volts. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Combination profile Phillips / slotted Application PlusMinus screws (Phillips/slotted) Blade Insulated, individually tested as per IEC 60900 Design PlusMinus (Phillips/slotted) Handle Kraftform with non-roll feature, multi-component Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces - resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. All Kraftform Plus screwdrivers are marked with their drive profile and size. This enables faster and more reliable selection of the correct tool from the tool case. ds: dsc: Scope of delivery 162 i PH/S SB VDE Insulated screwdriver for PlusMinus screws (Phillips/slotted), # 1 x 80 mm kts: VDE insulated screwdriver for PlusMinus screws, square 1 x 80 mm kpn: 162 i PH/S SB kpn_dash: kpn_clear: 162iPHSSB bkpn: WERA 162 i PH/S SB bkpn_clear: WERA 162iPHSSB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05100019001 sr_ns: WERA05100019001
r: 03230339 p: 10.702 pid: 71153 b: WERA q: 0 st: lt: 13 ean: 4013288222251 sr: WERA 05051613001 sr_no_br: 05051613001 sr_no_br_cl: 05051613001 sr_cl: WERA05051613001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size PZ2 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Pozidriv Product Range Wera Kraftform n: WERA 1065 i PZ VDE Kraftform insulated Pozidriv screwdriver, PZ 2 x 100 mm - 05051613001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform VDE screwdriver. Multi-component Kraftform handle for fast and gentle work. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Handles marked for easy identification and sorting of tools. Insulated screwdriver for safe working up to 1,000 volts Individually tested Multi-component Kraftform handle for fast and low-fatigue working Handle markings simplify finding and sorting of tools The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Suitable for Pozidriv screws Blade Insulated, individually tested as per IEC 60900 Design Zinc phosphate-treated, Black Point tip Handle Kraftform with anti-roll protection, multi-component Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The multi-component Kraftform handle for quick and low-fatigue working. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 1065 i PZ VDE-insulated Kraftform Phillips-head screwdriver, PZ 2 x 100 mm kts: Kraftform insulated Pozidriv screwdriver, PZ 2 x 100 mm kpn: 1065 i PZ VDE kpn_dash: kpn_clear: 1065iPZVDE bkpn: WERA 1065 i PZ VDE bkpn_clear: WERA 1065iPZVDE c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05051613001 sr_ns: WERA05051613001
r: 03226385 p: 10.7 pid: 70155 b: WERA q: 0 st: lt: 16 ean: 4013288212306 sr: WERA 05008862001 sr_no_br: 05008862001 sr_no_br_cl: 05008862001 sr_cl: WERA05008862001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size T40 Blade length 25 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx n: WERA 367 TORX Stubby screwdriver, TX 40 x 25 mm - 05008862001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Particularly small screwdriver with short blade for hard-to-reach areas. The 2-component Kraftform handle with its handy combination of hard and soft zones allows for a firm grip and precise working. The blades have all the advantages of the Wera bit technology. Special surface treatment of the blades for high corrosion protection and optimum fitting accuracy in the screw. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Short compact shape for working in confined spaces Ergonomic 2-component Kraftform handle for precise work Blades with the benefits of the Wera Bit technology Hexagonal anti-roll feature against rolling away Take it easy tool finder: colour coding according to profile and size Application TORX® screws Blade Hexagonal, turned Handle Kraftform with anti-roll protection, 2 components. With Take it easy tool finder: Colour coding by profiles (green = TORX®) and size stamping. Features and benefits With its compact handle shape and the short blade, the Kraftform Stubbies are particularly suitable for working in confined screwdriving situations. The 2-component Kraftform handle allows high power transmission due to the non-slip, softer grip areas and high working speeds due to the hard grip areas, which allow a quick hand switch. The special surface treatment of the blades sees to a high level of corrosion protection and optimum fitting accuracy of the screw. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 367 TORX® Stubby screwdriver, TX 40 x 25 mm kts: screwdriver, TX 40 x 25 mm kpn: 367 TORX Stubby kpn_dash: kpn_clear: 367TORXStubby bkpn: WERA 367 TORX Stubby bkpn_clear: WERA 367TORXStubby c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05008862001 sr_ns: WERA05008862001
r: 02835649 p: 10.63 pid: 42062 b: WERA q: 0 st: lt: 8 ean: 4013288032256 sr: WERA 05118048001 sr_no_br: 05118048001 sr_no_br_cl: 05118048001 sr_cl: WERA05118048001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size TT9 Blade length 60 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Tamper Resistant Product Range Wera Kraftform n: WERA 2067 TORX BO Micro Kraftform screwdriver, TX 9 x 60 mm - 05118048001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Wera Micro screwdriver for precision mechanical work. Suitable for TORX® BO safety screw connections: TORX® BO screws have a protruding pin in their drive profile. This prevents any unauthorised loosening since the "normal" hex tools cannot move these screws. Only special TORX® BO tools have a bore hole which can slip over the pin. Rapid twisting is possible by fixing the hand on the twist cap and using the fast-turning zone just below it. This makes time-consuming grip adjustments unnecessary. Power zone with integrated soft zones ensure the transfer of higher tightening and loosening torque. Precision zone for the right angle for adjustment work. The Wera Black Point tip offers high corrosion protection and an exact fit. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. Kraftform Micro screwdriver for recessed TORX® screws with safety pin Multi-component Kraftform Micro handle for fast and ergonomic screwdriving The Wera Black Point tip offers an exact fit and optimum corrosion protection For TORX® socket screws with safety pin Take it easy tool finder: colour coding according to profile and size Application TORX® socket screws with safety pin (BO = with bore hole) Blade Round Design Bore hole in TORX® section, chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (green = TORX®) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Multi-component screwdriver handle for ergonomic working. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Indispensable for many users, including electronics technicians, opticians, precision engineers, jewellers, EDP hardware fitters and model-makers ds: dsc: Scope of delivery 2067 TORX® BO Screwdriver for tamper-proof TORX® screws for electronic applications, TX 9 x 60 mm kts: Kraftform screwdriver, TX 9 x 60 mm kpn: 2067 TORX BO Micro kpn_dash: kpn_clear: 2067TORXBOMicro bkpn: WERA 2067 TORX BO Micro bkpn_clear: WERA 2067TORXBOMicro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118048001 sr_ns: WERA05118048001
r: 41071178 p: 10.578 pid: 70687 b: WERA q: 0 st: lt: 13 ean: 4013288105486 sr: WERA 05004783001 sr_no_br: 05004783001 sr_no_br_cl: 05004783001 sr_cl: WERA05004783001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size #1 Blade length 150 mm Blade thickness ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Square n: WERA 168 i VDE insulated screwdriver for inside square, square 1 x 150 mm - 05004783001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera VDE screwdriver with multi-component Kraftform handle for fast and smooth work: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Colour-coded. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Zinc phosphate plated Application Square socket head screws Blade Insulated, individually tested as per IEC 60900 Design Zinc-phosphated Handle Kraftform with non-roll feature, multi-component Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces - resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 168 i VDE Insulated screwdriver for square socket head screws, # 1 x 150 mm kts: insulated screwdriver for inside square, square 1 x 150 mm kpn: 168 i VDE kpn_dash: kpn_clear: 168iVDE bkpn: WERA 168 i VDE bkpn_clear: WERA 168iVDE c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05004783001 sr_ns: WERA05004783001
r: 02831667 p: 10.578 pid: 42842 b: WERA q: 0 st: lt: 6 ean: 4013288138392 sr: WERA 05028072001 sr_no_br: 05028072001 sr_no_br_cl: 05028072001 sr_cl: WERA05028072001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size T27 Blade length 300 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx n: WERA 367 TORX HF screwdriver with holding function, TX 27 x 300 mm - 05028072001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. With holding function: The clamping force resulting from the seating stress between the tip and the screw profile keeps the screws securely on the tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Handles marked for easy identification and sorting of tools. Screwdriver for recessed TORX® screws Holding function for TORX® screws Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Application TORX® socket screws Blade Round Design Holding function for TORX® screws made according to Acument Intellectual Properties specifications, chrome-plated Handle Kraftform with non-roll feature, multi-component Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. ds: dsc: Scope of delivery 367 TORX® HF Screwdriver with holding function for TORX® screws, TX 27 x 300 mm kts: screwdriver with holding function, TX 27 x 300 mm kpn: 367 TORX HF kpn_dash: kpn_clear: 367TORXHF bkpn: WERA 367 TORX HF bkpn_clear: WERA 367TORXHF c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05028072001 sr_ns: WERA05028072001
r: 03057726 p: 10.28 pid: 31801 b: WERA q: 0 st: lt: 12 ean: 4013288212320 sr: WERA 05008864001 sr_no_br: 05008864001 sr_no_br_cl: 05008864001 sr_cl: WERA05008864001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size #2 Blade length 25 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Square n: WERA 368 Stubby screwdriver for internal square screws, square 2 x 25 mm - 05008864001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Particularly small screwdriver with short blade for hard-to-reach areas. The 2-component Kraftform handle with its handy combination of hard and soft zones allows for a firm grip and precise working. The blades have all the advantages of the Wera bit technology. Special surface treatment of the blades for high corrosion protection and optimum fitting accuracy in the screw. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Short compact shape for working in confined spaces Ergonomic 2-component Kraftform handle for precise work Blades with the benefits of the Wera Bit technology Hexagonal anti-roll feature against rolling away With colour coding and size stamping Application Square head socket screws Blade Hexagonal, turned Handle Kraftform with anti-roll protection, 2 components, with colour coding and size stamping Features and benefits With its compact handle shape and the short blade, the Kraftform Stubbies are particularly suitable for working in confined screwdriving situations. The 2-component Kraftform handle allows high power transmission due to the non-slip, softer grip areas and high working speeds due to the hard grip areas, which allow a quick hand switch. The special surface treatment of the blades sees to a high level of corrosion protection and optimum fitting accuracy of the screw. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 368 Stubby screwdriver for square head socket screws, # 2 x 25 mm kts: screwdriver for internal square screws, square 2 x 25 mm kpn: 368 Stubby kpn_dash: kpn_clear: 368Stubby bkpn: WERA 368 Stubby bkpn_clear: WERA 368Stubby c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05008864001 sr_ns: WERA05008864001
r: 02835494 p: 10.28 pid: 42095 b: WERA q: 0 st: lt: 8 ean: 4013288108821 sr: WERA 05118103001 sr_no_br: 05118103001 sr_no_br_cl: 05118103001 sr_cl: WERA05118103001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size HEX 1/8" Blade length 60 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Ball-end hexagon Product Range Wera Kraftform n: WERA 2052 Micro Kraftform hexagonal ball head screwdriver, 1/8" x 60 mm - 05118103001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Wera Micro screwdriver for precision mechanical work. Ballpoint profile: the ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. Rapid twisting is possible by fixing the hand on the twist cap and using the fast-turning zone just below it. This makes time-consuming grip adjustments unnecessary. Power zone with integrated soft zones ensure the transfer of higher tightening and loosening torque. Precision zone for the right angle for adjustment work. The Wera Black Point tip offers high corrosion protection and an exact fit. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. Kraftform Micro screwdriver with ballpoint for hexagon socket screws Multi-component Kraftform Micro handle with anti-roll feature and rotating cap The Wera Black Point tip offers an exact fit and optimum corrosion protection Ballpoint for dependable working even in difficult installation situations Take it easy tool finder: colour coding according to profile and size Application Hexagon socket screws Blade Round Design Hexagon ball end, chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (blue = hexagon) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Multi-component screwdriver handle for ergonomic working. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2052 Ball end hexagon screwdriver for electronic applications, 1/8" x 60 mm kts: Kraftform hexagonal ball head screwdriver, 1/8" x 60 mm kpn: 2052 Micro kpn_dash: kpn_clear: 2052Micro bkpn: WERA 2052 Micro bkpn_clear: WERA 2052Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118103001 sr_ns: WERA05118103001
r: 02061831 p: 10.247 pid: 42831 b: WERA q: 0 st: lt: 15 ean: 4013288025920 sr: WERA 05138266001 sr_no_br: 05138266001 sr_no_br_cl: 05138266001 sr_cl: WERA05138266001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size TT40 Blade length 130 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Tamper Resistant n: WERA 367 TORX BO screwdriver with bore, TX 40 x 130 mm - 05138266001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low-fatigue working. TORX® BO screws have a protruding pin in their drive profile. This prevents any unauthorised loosening since the "normal" hex tools cannot move these screws. Only special TORX® BO tools have a bore hole which can slip over the pin. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Handle markings for simplified finding and sorting of the tool. Screwdrivers for recessed TORX® screws with safety pin Multi-component Kraftform handle for fast and ergonomic screwdriving For TORX® socket screws with safety pin Handle markings simplify finding and sorting of tools The Wera Black Point tip offers an exact fit and optimum corrosion protection Application TORX® screws with safety pin (BO = with bore hole) Blade Round Design Bore hole in TORX® section, chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that "normal" TORX® tools cannot be used. This pin fits into the borehole of TORX® BO tools allowing safety screws to be unfastened. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 367 TORX® BO Screwdriver for tamper-proof TORX® screws, TX 40 x 130 mm kts: screwdriver with bore, TX 40 x 130 mm kpn: 367 TORX BO kpn_dash: kpn_clear: 367TORXBO bkpn: WERA 367 TORX BO bkpn_clear: WERA 367TORXBO c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05138266001 sr_ns: WERA05138266001
r: 02831666 p: 10.247 pid: 42840 b: WERA q: 0 st: lt: 12 ean: 4013288138408 sr: WERA 05028071001 sr_no_br: 05028071001 sr_no_br_cl: 05028071001 sr_cl: WERA05028071001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size T25 Blade length 300 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx n: WERA 367 TORX HF screwdriver with holding function, TX 25 x 300 mm - 05028071001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. With holding function: The clamping force resulting from the seating stress between the tip and the screw profile keeps the screws securely on the tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Handles marked for easy identification and sorting of tools. Screwdriver for recessed TORX® screws Holding function for TORX® screws Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Application TORX® socket screws Blade Round Design Holding function for TORX® screws made according to Acument Intellectual Properties specifications, chrome-plated Handle Kraftform with non-roll feature, multi-component Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. ds: dsc: Scope of delivery 367 TORX® HF Screwdriver with holding function for TORX® screws, TX 25 x 300 mm kts: screwdriver with holding function, TX 25 x 300 mm kpn: 367 TORX HF kpn_dash: kpn_clear: 367TORXHF bkpn: WERA 367 TORX HF bkpn_clear: WERA 367TORXHF c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05028071001 sr_ns: WERA05028071001
r: 02094540 p: 10.12 pid: 42839 b: WERA q: 0 st: lt: 12 ean: 4013288003843 sr: WERA 05022905001 sr_no_br: 05022905001 sr_no_br_cl: 05022905001 sr_cl: WERA05022905001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size HEX 5/32" Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Ball-end hexagon n: WERA 352 hexagonal ball head screwdriver, 5/32" x 100 mm - 05022905001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. The ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Hexagonal ballpoint screwdriver Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal blade and ballpoint for secure working even in difficult installation situations The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Hexagon socket screws Blade Hexagonal Design Ball end hexagon, chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, sizes W/F 12.0, W/F 1/2": Kraftform with non-roll feature, single-component. Take it easy tool finder: colour coding according to profile (blue = hexagon) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 352 Ball end screwdriver for hexagon socket screws, 5/32" x 100 mm kts: hexagonal ball head screwdriver, 5/32" x 100 mm kpn: 352 kpn_dash: kpn_clear: 352 bkpn: WERA 352 bkpn_clear: WERA 352 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05022905001 sr_ns: WERA05022905001
r: 02835490 p: 10.06 pid: 42089 b: WERA q: 0 st: lt: 8 ean: 4013288032041 sr: WERA 05118100001 sr_no_br: 05118100001 sr_no_br_cl: 05118100001 sr_cl: WERA05118100001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size HEX 5/64" Blade length 60 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Ball-end hexagon Product Range Wera Kraftform n: WERA 2052 Micro Kraftform hexagonal ball head screwdriver, 5/64" x 60 mm - 05118100001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Wera Micro screwdriver for precision mechanical work. Ballpoint profile: the ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. Rapid twisting is possible by fixing the hand on the twist cap and using the fast-turning zone just below it. This makes time-consuming grip adjustments unnecessary. Power zone with integrated soft zones ensure the transfer of higher tightening and loosening torque. Precision zone for the right angle for adjustment work. The Wera Black Point tip offers high corrosion protection and an exact fit. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. Kraftform Micro screwdriver with ballpoint for hexagon socket screws Multi-component Kraftform Micro handle with anti-roll feature and rotating cap The Wera Black Point tip offers an exact fit and optimum corrosion protection Ballpoint for dependable working even in difficult installation situations Take it easy tool finder: colour coding according to profile and size Application Hexagon socket screws Blade Round Design Hexagon ball end, chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (blue = hexagon) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Multi-component screwdriver handle for ergonomic working. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2052 Ball end hexagon screwdriver for electronic applications, 5/64" x 60 mm kts: Kraftform hexagonal ball head screwdriver, 5/64" x 60 mm kpn: 2052 Micro kpn_dash: kpn_clear: 2052Micro bkpn: WERA 2052 Micro bkpn_clear: WERA 2052Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118100001 sr_ns: WERA05118100001
r: 03057724 p: 9.97 pid: 31799 b: WERA q: 0 st: lt: 12 ean: 4013288212313 sr: WERA 05008863001 sr_no_br: 05008863001 sr_no_br_cl: 05008863001 sr_cl: WERA05008863001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size #1 Blade length 25 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Square n: WERA 368 Stubby screwdriver for internal square screws, square 1 x 25 mm - 05008863001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Particularly small screwdriver with short blade for hard-to-reach areas. The 2-component Kraftform handle with its handy combination of hard and soft zones allows for a firm grip and precise working. The blades have all the advantages of the Wera bit technology. Special surface treatment of the blades for high corrosion protection and optimum fitting accuracy in the screw. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Short compact shape for working in confined spaces Ergonomic 2-component Kraftform handle for precise work Blades with the benefits of the Wera Bit technology Hexagonal anti-roll feature against rolling away With colour coding and size stamping Application Square head socket screws Blade Hexagonal, turned Handle Kraftform with anti-roll protection, 2 components, with colour coding and size stamping Features and benefits With its compact handle shape and the short blade, the Kraftform Stubbies are particularly suitable for working in confined screwdriving situations. The 2-component Kraftform handle allows high power transmission due to the non-slip, softer grip areas and high working speeds due to the hard grip areas, which allow a quick hand switch. The special surface treatment of the blades sees to a high level of corrosion protection and optimum fitting accuracy of the screw. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 368 Stubby screwdriver for square head socket screws, # 1 x 25 mm kts: screwdriver for internal square screws, square 1 x 25 mm kpn: 368 Stubby kpn_dash: kpn_clear: 368Stubby bkpn: WERA 368 Stubby bkpn_clear: WERA 368Stubby c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05008863001 sr_ns: WERA05008863001
