r: 02953293 p: 110.909 pid: 31161 b: WERA q: 0 st: lt: 8 ean: 4013288204387 sr: WERA 05136026001 sr_no_br: 05136026001 sr_no_br_cl: 05136026001 sr_cl: WERA05136026001 sr_dash: sold: 1552.726 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 15 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt SH 2 plumbing/heating tool kit 15-piece - 05136026001 cn: TOOL SET cn2: TOOL SET cn_clear: TOOLSET d: Product description Compact tool set with 15 important screwdriving tools for the sanitary and heating sectors. With 2 Joker Switch ratcheting combination wrenches, VDE handle with 4 extra-slim blades, voltage tester, 4 L-keys with thermoplastic sleeve, chiseldriver and 2 Kraftform Plus nutspinners with hollow shaft. The details: 2 Joker Switch ratcheting combination wrenches with special retaining plate to prevent slipping/loss of the screw and more torque transfer; one Kraftform 817 VDE bladeholding screwdriver solely for Wera VDE blades; 4 VDE blades (each 157 mm length) with Take it easy tool finder with colour coding by profile and laser-engraved size indication; for safe working at up to 1000 volts (iS with reduced blade diameter and integrated protective insulation for reaching and operating low-lying screw and spring elements); 1 single-pole phase tester 247; 4 L-keys with Hex-Plus profile to prevent rounding out screws; 1 Kraftform chiseldriver 932 A (slotted) with pound-thru hexagonal blade and integrated impact cap for screwdriving and light chiselling; 2 socket wrench nutspinners 395 HO with hollow shaft for tightening or loosening nuts on protruding threaded rods as well as fixed screws. Including tools with Take it easy tool finder with colour coding in accordance to profiles and size stamping - for fast and easy tool selection. 15 screwdriving tools for sanitary or heating applications in compact and robust Wera textile box JOKER combination ratcheting wrench with special holding plate against slipping/loss of the screw VDE-insulated Kraftform 817 VDE bladeholding screwdriver with anti-roll protection VDE blades (157 mm length) with practical spinning function, anti-roll protection and Take it easy tool finder: colour coding by profile and laser-engraved size indication Kraftform Chiseldriver with hex blade extending through handle and integrated impact cap 15-piece set; in a surface-preserving, compact and extremely robust textile box; low volume and weight for simplified mobility.1 Kraftform chiseldriver 932 A (slotted) with pound-thru hexagonal blade and integrated impact cap for screwdriving and light chiselling; 2 socket wrench screwdrivers 395 HO with hollow shaft for tightening or loosening nuts on protruding threaded rods as well as fixed screws; One Kraftform 817 VDE bitholding screwdriver solely for Wera VDE blades; 4 VDE blades (each 157 mm length) with Take it easy toolfinder with colour coding by profile and laser-engraved size indication; with reduced blade diameter and integrated protective insulation, so low-lying screws can be accessed, individually tested as per IEC 60900; 1 single-pole phase tester 247, 2 Joker Switch ratcheting combination wrenches with holding function for nuts and bolts, protecting against slippage, double hexagon geometry and extremely hard tips on the metal plate to protect against slippage at high torques, with a small return angle of 30°, switch lever for a comfortable direction change, ring end angled at 15° from the handle; 4 L-keys with Hex-Plus profile (prevents the rounding of hexagon socket screws), with holding function for hexagon socket screws, hexagonal ball-end on the long arm, BlackLaser surface, plastic sleeve, all L-keys are easily identified by their colour coding and size marking. Features and benefits Compact tool set with 15 important screwdriving tools for the sanitary and heating sectors. Compact tool set with the 15 most important screwdriving tools for plumbing and heating applications. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. The chiseldriver is the solution for jobs that require more than just screwdriving. For fastening, chiselling and loosening seized screws or hose clamps. With an integrated impact cap that extends service live and reduces the risk of splintering. With a pound-thru hexagon blade made from high-grade material for - zero-loss transfer of high forces when struck with a hammer. The tough viscous tempered material prevents the blade from splintering or breaking. More TORQUE can be transferred by attaching an open-jawed or ring spanner to the integrated hexagon bolster. A screwdriver with a hollow shaft is needed whenever there are screwdriving jobs involving threaded rods i.e. the threaded rod can slip into the hollow shaft of the nutsetter. The Kraftform Kompakt VDE blades are equipped with the Take it easy Tool finder. The colour coding by profile and the laser-engraved size indication make it easy to identify the required tool quickly. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. ds: dsc: Scope of delivery Kraftform Kompakt SH 2 PlumbKit, 15 pieces 2x 395 HO Nutdriver: 10x90 mm, 13x90 mm 1x 932 A Screwdriver for slotted screws: 1.2 x 7 x 125 mm 2x 6001 Joker Switch Ratcheting combination wrench, with switch lever: 10x159 mm, 13x179 mm 4x 950 SPKL HF L-key Multicolour, metric, with holding function: 3x123 mm, 4x137 mm, 5x154 mm, 6x172 mm 1x 817 VDE Kraftform blade-holding handle: 9 x 98 mm 2x Kraftform Kompakt VDE 62 iS Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 60 iS Take it easy: 0.6x3.5x157 mm, 1x5.5x157 mm 1x 247 Single-pole phase tester: 0.5 x 3 x 70 mm 1x Hook and Loop Fastener Strip 240: 50 x 240 mm kts: plumbing/heating tool kit 15-piece kpn: Kraftform Kompakt SH 2 kpn_dash: kpn_clear: KraftformKompaktSH2 bkpn: WERA Kraftform Kompakt SH 2 bkpn_clear: WERA KraftformKompaktSH2 c_path: Home / Tools / Hand tools / Mixed sets / Single sets / Tool set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera single sets / Wera tool set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05136026001 sr_ns: WERA05136026001
r: 41071294 p: 64.297 pid: 71876 b: WERA q: 0 st: lt: 9 ean: 4013288115713 sr: WERA 05071116001 sr_no_br: 05071116001 sr_no_br_cl: 05071116001 sr_cl: WERA05071116001 sr_dash: sold: 1478.831 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder type Internal hexagon VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 17 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 60 Stainless screwdriver handle with stainless steel change blades in belt pouch 17-piece - 05071116001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Pouch with bits in a length of 89 mm. Includes Kraftform holder 3816 R with Rapidaptor quick-release chuck and multi-component Kraftform handle for low-fatigue working. Stainless design to prevent the formation of extraneous rust. Solution to the extraneous rust problem: fasten stainless screws with stainless tools Vacuum ice-hardening provides the required hardness and strength Handle/Interchangeable blade system for rapid exchange of the blade Rapidaptor technology for rapid bit change Storage and transport in a robust belt pouch Pouch with 89 mm bits, stainless steel17-piece set1 Kraftform stainless bitholding screwdriver 3816 R with Rapidaptor quick-release chuck Features and benefits Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The tools can be stored and carried in a robust belt pouch, keeping them always to hand. ds: dsc: Scope of delivery Kraftform Kompakt 60, stainless, 17 pieces 1x 3816 R Bitholding screwdriver with Rapidaptor quick-release chuck, stainless: 1/4" x 119 mm 3x 3851/4 Bits, stainless: PH 1x89 mm, PH 2x89 mm, PH 3x89 mm 3x 3855/4 Bits, stainless: PZ 1x89 mm, PZ 2x89 mm, PZ 3x89 mm 5x 3867/4 TORX® BO bits with bore hole, stainless: TX 10x89 mm, TX 15x89 mm, TX 20x89 mm, TX 25x89 mm, TX 30x89 mm 1x 3800/4 Bits, stainless: 1 x 5.5 x 89 mm 4x 3840/4 Bits, stainless: 3x89 mm, 4x89 mm, 5x89 mm, 6x89 mm kts: screwdriver handle with stainless steel change blades in belt pouch 17-piece kpn: Kraftform Kompakt 60 Stainless kpn_dash: kpn_clear: KraftformKompakt60Stainless bkpn: WERA Kraftform Kompakt 60 Stainless bkpn_clear: WERA KraftformKompakt60Stainless c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05071116001 sr_ns: WERA05071116001
r: 02829210 p: 132.066 pid: 42303 b: WERA q: 0 st: lt: 11 ean: 4013288170132 sr: WERA 05135927001 sr_no_br: 05135927001 sr_no_br_cl: 05135927001 sr_cl: WERA05135927001 sr_dash: sold: 1452.726 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 25 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt SH 1 plumbing/heating tool kit 25-piece - 05135927001 cn: TOOL SET cn2: TOOL SET cn_clear: TOOLSET d: Product description Compact tool set with the 25 most important screwdriving tools for plumbing and heating applications. Includes 2 JOKER open-end wrenches, the 1/4" Zyklop ratchet and accessories, 6 x 89 mm bits, 5 multi-component Kraftform Plus screwdrivers and single-pole phase tester. Two JOKER combination ratcheting wrenches with special holding plate against slipping/loss of the screw and more torque transfer; 1 Zyklop ratchet 8000 A (1/4") for fast, powerful working; 3 Zyklop sockets 8790 HMA for manual and power tools usage; 1 Zyklop adaptor 8784 A1 for bits; 6 TORX® HF bits 867/4 with holding function for TORX® screws for secure carry without any loss of the screws; the Wera 867/4 TX HF bits are also suitable for Würth ASSY screws as well as Altenloh SPAX T-STAR plus screws; 1 single-pole phase tester 247; 2 Kraftform series 100 slotted screwdrivers 160 i and 160 iS for safe work up to 1,000 volts (160 iS with reduced shaft diameter and integrated insulation protection for reaching and actuating low-lying screws and spring elements); 1 Kraftform Chiseldriver 932 A (slotted) with hex blade extending right through the handle and integrated impact cap for screwdriving and simpler chiselling work; 2 nutsetters 395 HO with hollow shaft for the tightening or loosening of screws on long bolts as well as seized screws. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. JOKER combination ratcheting wrench with special holding plate against slipping/loss of the screw Zyklop Speed ratchet for fast and powerful working Insulated Kraftform VDE slotted screwdriver for safe work at 1,000 volts Kraftform Chiseldriver with hex blade extending through handle and integrated impact cap Hollow shaft nutspinner for nuts on protruding threaded rods 25-piece set; in a surface-preserving, compact and extremely robust textile box; low volume and weight for simplified mobility.2 Joker combination ratchet wrenches with special retaining plate to prevent slipping/loss of the screw and more power transfer, 1 Zyklop ratchet 8000 A (1/4") for rapid, powerful operation, 3 Zyklop sockets 8790 HMA for manual and power tool applications, 1 Zyklop adapter 8784 A1 for bits, 6 TORX® HF bits 867/4 with holding function for TORX® screws for secure hold without any loss of the screw, 1 single-pole phase tester 247, 2 Kraftform Series 100 VDE slotted screwdrivers 160 i and 160 iS for safe work up to 1,000 volts (160 iS has a reduced blade diameter with integrated protective insulation to allow sunken screw and spring elements to be reached and actuated) with Take it easy tool finder: colour coding according to profile and size stamp, 1 Kraftform chisel driver 932 A (slotted) with hexagon blade throughout and integrated impact cap for screwdriving and simple chiselling jobs, 2 socket wrench screwdrivers 395 HO with hollow shaft for the tightening or loosening of screws on long bolts as well as for jammed screws. Features and benefits Kraftform Kompakt user ranges - the new special sets - compact yet very versatile. Suitable for all sanitary, wood, metal or electrical applications. Compact tool set with the 25 most important screwdriving tools for plumbing and heating applications. When we began to think about open-ended wrenches, we asked ourselves: why does the wrench always have to be flipped over; why does it have an offset design; why does it slip off injuring fingers? The new design of the open end resulted in a real "Joker" that works even when all other trumps have been played. 1. Fine-tooth ratchet 2. Flex-head ratchet 3. Angle ratchet 4. Quick-release ratchet 5. Power ratchet 6. Screwdriver The Zyklop Speed ratchets are really fast movers. The gyrating mass design means that screwdriving is accelerated. The rotation-symmetric structure of the Kraftform handle and the free-turning sleeve reinforce this rapid twisting process, particularly when the ratchet does not engage due to too little resistance in the thread. A screwdriver with a hollow shaft is needed whenever there are screwdriving jobs involving threaded rods i.e. the threaded rod can slip into the hollow shaft of the nutsetter. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. Why is the right tool so often not at hand? The reason: too many tools and overly-heavy tool bags can make it bothersome to carry them onsite. So for us it was a clear challenge: to design a tool that is suitable for a whole host of applications and can be easily taken along to jobs at other sites. Our solution: Kraftform Kompakt tools. A handle into which blades with a range of different profiles can be inserted. Compactly and protectively housed in a light and robust textile pouch or plastic box. ds: dsc: Scope of delivery Kraftform Kompakt SH 1 PlumbKit, 25 pieces 2x 6000 Joker Ratcheting combination wrenches: 10x159 mm, 13x177 mm 1x 8000 A Zyklop Speed Ratchet with 1/4" drive: 1/4" x 152 mm 3x 8790 HMA Zyklop 1/4" socket: 7x23 mm, 10x23 mm, 13x23 mm 1x 8784 A1 Zyklop bit adaptor, 1/4": 1/4" x 37 mm 6x 867/4 TORX® HF Bits with holding function: 2x TX 20x50 mm, 2x TX 25x50 mm, TX 30x50 mm, TX 40x50 mm 2x 851/4 Z bits: PH 2x89 mm, PH 1x89 mm 4x 840/4 Z bits: 3x89 mm, 4x89 mm, 5x89 mm, 6x89 mm 1x 247 Single-pole phase tester: 0.5 x 3 x 70 mm 1x 160 iS VDE Insulated screwdriver with reduced blade diameter for slotted screws: 0.6 x 3.5 x 100 mm 1x 160 i VDE Insulated screwdriver for slotted screws: 1 x 5.5 x 125 mm 1x 932 A Screwdriver for slotted screws: 1.2 x 7 x 125 mm 2x 395 HO Nutdriver: 10x90 mm, 13x90 mm kts: plumbing/heating tool kit 25-piece kpn: Kraftform Kompakt SH 1 kpn_dash: kpn_clear: KraftformKompaktSH1 bkpn: WERA Kraftform Kompakt SH 1 bkpn_clear: WERA KraftformKompaktSH1 c_path: Home / Tools / Hand tools / Mixed sets / Single sets / Tool set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera single sets / Wera tool set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05135927001 sr_ns: WERA05135927001
r: 03176967 p: 14.71 pid: 33891 b: WERA q: 4 st: 1 lt: 1 ean: 4013288217776 sr: WERA 05008874001 sr_no_br: 05008874001 sr_no_br_cl: 05008874001 sr_cl: WERA05008874001 sr_dash: sold: 1441.58 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved No ESD No Quantity per set 6 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt Stubby Magazin 2 compact screwdriver with internal bit magazine 6-piece - 05008874001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Particularly small bitholding screwdriver with short bit mounting for hard to reach areas. Includes 6 bits, which are located in a magazine in the handle. With only 65mm total length, the Kraftform Kompakt Stubby is a real mini screwdriving workshop. The strong permanent magnet in the bit mounting ensures secure holding of the bit. The 2-component handle with the practical combination of hard and soft zones allows for a firm grip and precise working. Take it easy tool finder: With size stamping and colour coding by output to find the required bit easily. Short, compact Stubby shape for working in tight installation spaces, with 6 bits in the integrated magazine Ergonomic 2-component Kraftform handle for precise work 1/4" bit mounting with strong permanent magnet Captive and swivelling bit magazine for easy removal and safe storage of bits Take it easy tool finder: colour coding according to profile and size Application Suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and Wera connection series 1 Design Bit holder with strong permanent magnet; BiTorsion bits for long service life, tough, for universal use. Take it easy tool finder: Size stamping and tips with colour coding to find the required bit quickly. Handle Kraftform Stubby with anti-roll protection, multi-component, integrated magazine Features and benefits The handle can be opened and thus gives access to the six bits contained in the magazine. With its compact handle shape and the short blade, the Kraftform Stubbies are particularly suitable for working in confined screwdriving situations. The swivelling bit magazine allows for the bits to be removed easily in almost any situation and cannot be lost. The bits are safely stored. Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. With softer BiTorsion zone to prevent the bit tip from twisting at high loads. This significantly increases product life. Tough design for universal use. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The magnet ensures that the bit is securely seated in the holder. ds: dsc: Scope of delivery Kraftform Kompakt Stubby magazine 2, 6 pieces 2x 800/1 BTZ bits: 0.8x5.5x25 mm, 1.2x6.5x25 mm 2x 851/1 BTZ bits: PH 1x25 mm, PH 2x25 mm 2x 855/1 BTZ bits: PZ 1x25 mm, PZ 2x25 mm kts: compact screwdriver with internal bit magazine 6-piece kpn: Kraftform Kompakt Stubby Magazin 2 kpn_dash: kpn_clear: KraftformKompaktStubbyMagazin2 bkpn: WERA Kraftform Kompakt Stubby Magazin 2 bkpn_clear: WERA KraftformKompaktStubbyMagazin2 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05008874001 sr_ns: WERA05008874001
r: 08103857 p: 69.256 pid: 70457 b: WERA q: 0 st: lt: 10 ean: 4013288229694 sr: WERA 05006618001 sr_no_br: 05006618001 sr_no_br_cl: 05006618001 sr_cl: WERA05006618001 sr_dash: sold: 1385.12 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved Yes ESD No Supplied in Case Quantity per set 17 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt VDE 17 RA 1 17-piece set - 05006618001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description 17-piece Kraftform Kompakt VDE set. One 837 i RA bladeholding screwdriver with ratchet functionality (40 teeth, 9° return angle), one 817 VDE bitholding screwdriver, 15 VDE blades with Take it easy Tool finder: Colour coding by profile and laser-engraved size indication. Individually tested tools as per IEC 60900. Individually tested in a water quench at 10,000 V for safe working at the approved voltage of 1,000 V. In a robust belt pouch. One Kraftform Kompakt VDE 837 i RA bladeholding screwdriver with ratchet functionality (40 teeth, 9° return angle) for interchangeable blades, one 817 VDE bladeholding screwdriver for interchangeable blades The 837 i RA bitholding screwdriver with a ratchet integrated in the handle ensures fast and safe working High working speed: The ratchet can also be used to "spin" when screwdriving Ergonomic intuitive switching to clockwise/counterclockwise or position 0 VDE blades (157 mm length) with practical spinning function, anti-roll protection and Take it easy tool finder: colour coding by profile and laser-engraved size indication 17-piece setOne 837 i RA bitholding screwdriver with ratchet functionality (40 teeth, 9° return angle), one 817 VDE bitholding screwdriver, each solely for Wera VDE blades. 15 VDE blades (each 157 mm length) with Take it easy Tool finder: Colour coding by profile and laser-engraved size indication Features and benefits The integrated ratchet with fine toothing (40 teeth and a return angle of 9°) eases and accelerates screwdriving without having to reposition the tool. The ratchet mechanism also allows fast "spinning" while screwdriving. The bitholding screwdriver is suitable solely for Wera VDE blades. Kraftform Plus handle for comfortable ergonomic screwdriving, avoiding blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The Kraftform Kompakt VDE blades are equipped with the Take it easy Tool finder. The colour coding by profile and the laser-engraved size indication make it easy to identify the required tool quickly. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. ds: dsc: Scope of delivery Kraftform Kompakt VDE 17 RA 1, 17 pieces 1x 837 i RA Kraftform blade-holding handle with ratchet functionality: 9 x 115 mm 1x 817 VDE Kraftform blade-holding handle: 9 x 98 mm 2x Kraftform Kompakt VDE 62 i Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 65 i Take it easy: PZ 1x157 mm, PZ 2x157 mm 2x Kraftform Kompakt VDE 65 i PZ/S Take it easy: # 1x157 mm, # 2x157 mm 4x Kraftform Kompakt VDE 67 i TORX® Take it easy: TX 10x157 mm, TX 15x157 mm, TX 20x157 mm, TX 25x157 mm 4x Kraftform Kompakt VDE 60 i Take it easy: 0.4x2.5x157 mm, 0.8x4x157 mm, 1x5.5x157 mm, 1.2x6.5x157 mm 1x Kraftform Kompakt VDE 60 iS Take it easy: 0.6 x 3.5 x 157 mm kts: 17-piece set kpn: Kraftform Kompakt VDE 17 RA 1 kpn_dash: kpn_clear: KraftformKompaktVDE17RA1 bkpn: WERA Kraftform Kompakt VDE 17 RA 1 bkpn_clear: WERA KraftformKompaktVDE17RA1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006618001 sr_ns: WERA05006618001
r: 03229082 p: 104.793 pid: 71707 b: WERA q: 0 st: lt: 10 ean: 4013288217721 sr: WERA 05134013001 sr_no_br: 05134013001 sr_no_br_cl: 05134013001 sr_cl: WERA05134013001 sr_dash: sold: 1362.309 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 36 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt F 1 screwdriver tool set for frame construction 36-piece - 05134013001 cn: TOOL SET cn2: TOOL SET cn_clear: TOOLSET d: Product description Compact Wera screwdriving tool set with the 36 most important tools for window construction. Premium 36-piece universal tool set for the professional window builder 393 S extra slim bit hand holder with flexible shaft for applications in hard-to-reach work spaces With Joker 6004 S spanner and Zyklop Mini 1 bit ratchet (1/4") Socket wrench and bit assortment in premium Wera quality, attuned to universal window construction applications Compact and stable tool box with Wera 2go compatibility 36-piece set; in a surface-preserving, compact and extremely robust textile box. Low volume and weight for simplified mobility.Compact tool set for professional window installation. 1x 393 S extra slim bitholding screwdriver with flexible shaft, with a compact stainless steel holder and strong permanent magnet, secure bit holding feature due to locking mechanism for the application in hard-to-reach installation spaces, 1x 813 bit holder, 14 bits, 1x 1/4" Zyklop Mini 8001 A bit-ratchet, 1x 870/1 adapter (1/4"-hexagon to 1/4"-square head) 1 Zyklop 8794 SA extention, 1/4", short, for socket wrench inserts, 4 Zyklop socket wrench inserts, 2 Hex-Plus L-keys for hexagonal socket screws, 3 Hex-Plus L-keys with holding function for hexagonal socket screws, 6 L-keys with holding function for TORX® screws, 1x 6004 S self-setting spanner for hexagon screw heads and bolts with wrench size 10-13 (metric) or 7/16"-1/2" (imperial). Features and benefits Around the corner screwdriving with the 393 S bitholding screwdriver. The flexible shaft allows to reach fixing screws in unfavourable positions. The ideal tool for srewdriving situations that are difficult to reach. Compact Wera screwdriving tool set with the 35 most important tools for window construction. Socket and bit assortment in premium Wera quality, attuned to universal window construction applications. With 2 bit hand holders and 1 bit ratchet (which can also be used for sockets, if used with an adaptor). Around the corner screwdriving with the 393 S bitholding screwdriver. The flexible shaft allows to reach fixing screws in unfavourable positions. The ideal tool for srewdriving situations that are difficult to reach. Secure bit holding feature due to locking mechanism. With strong permanent magnet. The particularly slim bit holder allows working in very tight work spaces. The Zyklop Mini 1 mini ratchet allows particularly quick screwdriving, even in narrow work situations. With direct bit mounting. With the Wera 870/1 adapter (1/4"-hexagon to 1/4"-square head), 1/4" sockets can also be operated. The manual and machine sockets can be used both for hand and power tools use (non-impact). Users need just one socket set for all applications. The clamping of the screw is achieved by a flexible locking ball. The holding function is especially helpful in confined, hard-to-reach spaces, where there is no room for a second hand to secure the screw on the tool. ds: dsc: Scope of delivery Kraftform Kompakt F 1 screwdriving tool set for window installation, 36 pieces 1x 393 S Bitholding screwdriver extra slim with flexible shaft: 1/4" x 173.5 mm 1x 813 Bitholding screwdriver: 1/4" x 78 mm 1x 8001 A Bit Ratchet 1/4": 1/4" x 87 mm 1x 870/1 Adaptor: 1/4" x 25 mm 1x 8794 SA Zyklop extension with free-turning sleeve, short, 1/4": 1/4" x 75 mm 4x 8790 HMA Zyklop 1/4" socket: 7x23 mm, 8x23 mm, 10x23 mm, 13x23 mm 3x 851/4 TZ bits: PH 1x50 mm, PH 2x50 mm, PH 3x50 mm 6x 867/4 Z TORX® bits: TX 8x50 mm, TX 10x50 mm, TX 15x50 mm, TX 20x50 mm, TX 25x50 mm, TX 30x50 mm 6x 840/4 Z bits: 2x50 mm, 2.5x50 mm, 3x50 mm, 4x50 mm, 5x50 mm, 6x89 mm 2x 950 SPKL L-key Multicolour, metric: 2x101 mm, 2.5x112 mm 3x 950 SPKL HF L-key Multicolour, metric, with holding function: 3x123 mm, 4x137 mm, 5x154 mm 6x 967 SXL HF TORX® L-key Multicolour with holding function, long: TX 8x90 mm, TX 10x112 mm, TX 15x123 mm, TX 20x137 mm, TX 25x154 mm, TX 30x195 mm 1x 6004 Joker S Self-setting spanner: 10; 11; 12; 13 x 7/16; 1/2" x 154 mm kts: screwdriver tool set for frame construction 36-piece kpn: Kraftform Kompakt F 1 kpn_dash: kpn_clear: KraftformKompaktF1 bkpn: WERA Kraftform Kompakt F 1 bkpn_clear: WERA KraftformKompaktF1 c_path: Home / Tools / Hand tools / Mixed sets / Single sets / Tool set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera single sets / Wera tool set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05134013001 sr_ns: WERA05134013001
r: 03262247 p: 82.314 pid: 70648 b: WERA q: 0 st: lt: 12 ean: 4013288222879 sr: WERA 05023471001 sr_no_br: 05023471001 sr_no_br_cl: 05023471001 sr_cl: WERA05023471001 sr_dash: sold: 1317.024 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Type of drive profile (bit) Mixed; Phillips; Pozidriv; Torx; Hexagon; Slotted VDE approved No ESD No Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 400 RA Set 1 bit holder 416 RA with T handle + 1/4" bit set 16 pieces - 05023471001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description 17-piece set in a robust textile box. One 416 RA T-handle bitholding screwdriver with ratchet functionality and Rapidaptor quick-release chuck for 1/4" bits. The integrated ratchet with fine toothing (80 teeth/return angle 4.5°) eases and accelerates screwdriving without having to reposition the tool. The ratchet mechanism completely embedded in the handle ensures very handy and comfortable work. With reversing lever for comfortable clockwise/counterclockwise direction change in one-hand operation. The ergonomic shape of the handle fills the ball of the hand well, the fingers lie securely in the softly rounded recessed grips. The whole hand comes into contact with the handle, friction loss between hand and handle is avoided. Bit holder for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3. With Rapidaptor technology for lightning-fast bit changes. 16 tough bits, 1/4", 89 mm long, for universal use. The integrated ratchet with fine toothing ensures fast and safe working Convenient working thanks to the ratchet mechanism fully embedded in the handle Reversing lever for comfortable clockwise/counterclockwise direction change Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working Rapidaptor bitholding screwdriver with fast-rotating sleeve for lightning-fast bit changes and high working speeds 17-piece setTextile box with one 416 RA T-handle bitholding screwdriver with ratchet function and Rapidaptor quick-release chuck, 16 tough bits, 1/4", 89 mm length Features and benefits The ratchet mechanism of the 416 RA T-handle bitholding screwdriver is completely embedded in the handle. The compact shape of the tool allows convenient working. The integrated ratchet with fine toothing (80 teeth) and a return angle of 4.5° eases and accelerates screwdriving without having to reposition the tool. The ratchet mechanism of the 416 RA T-handle bitholding screwdriver is completely embedded in the handle. The compact shape of the tool allows convenient working. The change of direction can easily be made using the reversing lever. The fast-rotating sleeve allows the tool to be guided safely while screwdriving and increases the working speed. The ergonomically shaped 2-component T-handle with finger recesses and pleasant surface facilitates very high power transmission and fatigue-free working. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. ds: dsc: Scope of delivery Kraftform Kompakt 400 RA Set 1, 17 pieces 1x 416 RA T-handle bitholding screwdriver with ratchet function and Rapidaptor quick-release chuck: 1/4" x 45 mm 2x 851/4 Z bits: PH 2x89 mm, PH 3x89 mm 2x 855/4 Z bits: PZ 2x89 mm, PZ 3x89 mm 6x 867/4 Z TORX® bits: TX 10x89 mm, TX 15x89 mm, TX 20x89 mm, TX 25x89 mm, TX 30x89 mm, TX 40x89 mm 5x 840/4 Z bits: 3x89 mm, 4x89 mm, 5x89 mm, 6x89 mm, 8x89 mm 1x 800/4 Z bits: 1 x 5.5 x 89 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: bit holder 416 RA with T handle + 1/4" bit set 16 pieces kpn: Kraftform Kompakt 400 RA Set 1 kpn_dash: kpn_clear: KraftformKompakt400RASet1 bkpn: WERA Kraftform Kompakt 400 RA Set 1 bkpn_clear: WERA KraftformKompakt400RASet1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05023471001 sr_ns: WERA05023471001
r: 08131779 p: 208.925 pid: 173561 b: WERA q: 0 st: lt: 28 ean: 4013288234261 sr: WERA 05006633001 sr_no_br: 05006633001 sr_no_br_cl: 05006633001 sr_cl: WERA05006633001 sr_dash: sold: 1253.55 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Connection size 1/4" Supplied in Case Quantity per set 23 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt VDE Safe-Torque Speed schakelkast set 1 interchangeable pins set, 23 pieces - 05006633001 cn: BIT AND HAND SOCKET SET cn2: BIT AND HAND SOCKET SET cn_clear: BITANDHANDSOCKETSET d: Product description 23-piece Kraftform Kompakt VDE set. One Safe-Torque Speed 7508 VDE torque wrench with five selectable maximum tightening torques (0.4; 0.8; 1.2; 1.6; 2.0 Nm), one 7516 VDE Safe-Torque Speed torque wrench with five selectable maximum tightening torques (0.4; 0.8; 1.2; 1.6; 2.0 Nm), each with a fixed position (Torque Lock) for unlimited loosening and tightening moments, digital torque value display, reliable slip-over mechanism when the set torque is reached, one 817 VDE bladeholding screwdriver. Torque wrenches and bladeholding screwdriver solely for Wera VDE blades. 20 VDE blades (each 157 mm length) with Take it easy tool finder: colour coding by profile and laser-engraved size indication, most of which with reduced blade diameter, so that even low-lying screw and spring elements can be easily reached and operated. In a robust textile box for neat storage and convenient transport. Individually tested tools as per IEC 60900 VDE bladeholding torque screwdriver 7508 VDE with 5 pre-set values (0.4; 0.8; 1.2; 1.6; 2.0 Nm) VDE bladeholding torque screwdriver 7516 with 5 pre-set values (2.4; 2.8; 3.2; 3.6; 4.0 Nm) Speed: Extremely fast setting of desired torque values Safe: Slip-over torque function which can not be overtightened - for clockwise/counterclockwise torque operation 23-piece setOne Safe-Torque Speed 7508 VDE torque wrench with five selectable maximum tightening torques (0.4; 0.8; 1.2; 1.6; 2.0 Nm), one Safe-Torque Speed 7516 VDE torque wrench with five selectable maximum tightening torques (2.4; 2.8; 3.2; 3.6; 4.0 Nm), each with a fixed position (Torque Lock) for unlimited loosening and tightening moments, digital torque value display, reliable slip-over mechanism when the set torque is reached, one 817 VDE Kraftform bitholding screwdriver, torque wrenches and bitholding screwdriver solely for Wera VDE blades, 20 VDE blades (each 157 mm length) with Take it easy toolfinder: colour coding by profile and laser-engraved size indication, most of which with reduced blade diameter, so that even low-lying screw and spring elements can be easily reached and operatedIn a robust textile box. Features and benefits The handle/blade system - Kraftform Kompakt VDE Each Kraftform Kompakt VDE set has been tested individually at 10,000 volts, in accordance with IEC 60900.This ten-times-higher testing load guarantees safe working at their maximum permitted load of 1,000 volts. Quick setting of the selectable tightening torque values. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The slip-over torque mechanism for clockwise/counterclockwise torque operation prevents unintentional application of excessive torque. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. ds: dsc: Scope of delivery Kraftform Kompakt VDE Safe-Torque Speed control cabinet Set 1, 23 pieces 1x 7508 VDE Kraftform Safe-Torque Speed Torque screwdriver, 0.4-2.0 Nm: 9 x 0.4 Nm x 0.8 Nm x 1.2 Nm x 1.6 Nm x 2.0 Nm x 192 mm 1x 7516 VDE Kraftform Safe-Torque Speed Torque screwdriver, 2.4-4.0 Nm: 9 x 2.4 Nm x 2.8 Nm x 3.2 Nm x 3.6 Nm x 4.0 Nm x 192 mm 1x 817 VDE Kraftform blade-holding handle: 9 x 98 mm 2x Kraftform Kompakt VDE 62 iS Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 65 iS Take it easy: PZ 1x157 mm, PZ 2x157 mm 2x Kraftform Kompakt VDE 62 iS PH/S Take it easy: # 1x157 mm, # 2x157 mm 2x Kraftform Kompakt VDE 65 iS PZ/S Take it easy: # 1x157 mm, # 2x157 mm 3x Kraftform Kompakt VDE 67 iS TORX® Take it easy: TX 15x157 mm, TX 20x157 mm, TX 25x157 mm 2x Kraftform Kompakt VDE 67 i TORX® Take it easy: TX 10x157 mm, TX 30x157 mm 4x Kraftform Kompakt VDE 64 i Take it easy: 2.5x157 mm, 3x157 mm, 4x157 mm, 5x157 mm 3x Kraftform Kompakt VDE 60 iS Take it easy: 0.6x3.5x157 mm, 0.8x4x157 mm, 1x5.5x157 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: interchangeable pins set, 23 pieces kpn: Kraftform Kompakt VDE Safe-Torque Speed schakelkast set 1 kpn_dash: Kraftform Kompakt VDE Safe kpn_clear: KraftformKompaktVDESafeTorqueSpeedschakelkastset1 bkpn: WERA Kraftform Kompakt VDE Safe-Torque Speed schakelkast set 1 bkpn_clear: WERA KraftformKompaktVDESafeTorqueSpeedschakelkastset1 c_path: Home / Tools / Hand tools / Mixed sets / Single sets / Bit and hand socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera single sets / Wera bit and hand socket set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006633001 sr_ns: WERA05006633001
r: 02829074 p: 56.033 pid: 42641 b: WERA q: 0 st: lt: 11 ean: 4013288183934 sr: WERA 05051043001 sr_no_br: 05051043001 sr_no_br_cl: 05051043001 sr_cl: WERA05051043001 sr_dash: sold: 1120.66 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder type Internal hexagon VDE approved No With safety colour code 1000V ESD Yes Supplied in Case Quantity per set 16 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 60 ESD screwdriver handle with interchangeable blades in folding case 17-piece - 05051043001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description ESD-safe Wera tool. 16 bits. Includes 2 816 R ESD holders, multi-component for high working speeds and particularly ergonomic screwdriving. Dependable protection against electrostatic energy and associated damage. Compact set that enables both manual as well as power tool operations. Simple sorting according to profile and size, easy bit removal and reinsertion; with belt clip, 18-piece. Suitable for manual and power tool operations Smooth hard zones for high speed turning, soft grip zones for high torque transfer Rapidaptor quick-release chuck Tough viscous bits for universal use In robust pouch Pouch with 89 mm bits17-piece set1 Kraftform bitholding screwdriver 816 R ESD with Rapidaptor quick-release chuck Features and benefits The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery Kraftform Kompakt 60 ESD, 17 pieces 1x 816 R ESD Bitholding screwdriver, non-magnetic: 1/4" x 119 mm 3x 851/4 Z bits: PH 1x89 mm, PH 2x89 mm, PH 3x89 mm 3x 855/4 Z bits: PZ 1x89 mm, PZ 2x89 mm, PZ 3x89 mm 5x 867/4 Z TORX® BO bits with bore hole: TX 10x89 mm, TX 15x89 mm, TX 20x89 mm, TX 25x89 mm, TX 30x89 mm 4x 840/4 Z bits: 3x89 mm, 4x89 mm, 5x89 mm, 6x89 mm 1x 800/4 Z bits: 1 x 5.5 x 89 mm kts: screwdriver handle with interchangeable blades in folding case 17-piece kpn: Kraftform Kompakt 60 ESD kpn_dash: kpn_clear: KraftformKompakt60ESD bkpn: WERA Kraftform Kompakt 60 ESD bkpn_clear: WERA KraftformKompakt60ESD c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05051043001 sr_ns: WERA05051043001
r: 03330288 p: 103.14 pid: 159669 b: WERA q: 0 st: lt: 11 ean: 4013288229977 sr: WERA 05006612001 sr_no_br: 05006612001 sr_no_br_cl: 05006612001 sr_cl: WERA05006612001 sr_dash: sold: 1031.4 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved Yes With safety colour code 1000V No Supplied in Case Quantity per set 17 Product Range Wera Kraftform Kompakt n: WERA 05006612001 Kraftform Kompakt VDE 17 extra slim 1 Tool Finder, 17-piece cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 2x 817 VDE bladeholding screwdrivers for Wera VDE blades; 14 VDE blades (each 157 mm length) with reduced blade diameter (items Kraftform Kompakt 60 i Take it easy 0.4x2.5 and Kraftform Kompakt 67 i Take it easy TX 10 standard blade diameter), so that even low-lying screw and spring elements can be easily reached and operated. With Take it easy Tool finder: Colour coding by profile and laser-engraved size indication - for quick and easy identification of the required tool. Individually tested tools as per IEC 60900 at 10,000 V for safe working at the approved voltage of 1,000 V. 1x Knipex VDE 13 96 200 pliers for electrical installation; these pliers replace up to 6 individual tools for electrical installation: cutting, stripping, gripping, bending, deburring and crimping - all in one tool. With safety pawl for gentle gripping. Chrome-plated for better rust protection, with insulated multi-component handle sleeves. In a robust belt pouch. The textile box features a fleece zone at the back. Using the provided self-adhesive hook and loop fastener strips, the textile box can be attached to the Wera 2go components. Or to the wall, shelf or workshop trolley. 2 VDE-insulated Kraftform 817 VDE bladeholding screwdrivers with anti-roll protection VDE blades (157 mm length) with practical spinning function, anti-roll protection and Take it easy tool finder: colour coding by profile and laser-engraved size indication Individually tested tools as per IEC 60900 All-in-one pliers for electrical installations: cable cutting, stripping, gripping, bending, deburring, crimping of ferrules Pliers including cable shears with precision cutting edges (induction-hardened) for Cu and Al cables up to 5 x 2.5 mm² / Ø 15 mm 17-piece set2x 817 VDE blade-holding screwdrivers; solely for Wera VDE blades14 VDE blades (each 157 mm length) with reduced blade diameter (items Kraftform Kompakt 60 i Take it easy 0.4x2.5 and Kraftform Kompakt 67 i TX 10 standard blade diameter) with integrated protective insulation, low-lying screw and spring elements can be easily reached and operated. With Take it easy Tool finder with colour coding by profile and laser-engraved size indication.1x Knipex VDE 13 96 200 pliers for electrical installation; for cutting, stripping, gripping, bending, deburring and crimping. With safety pawl for gentle gripping. Chrome-plated for better rust protection, with insulated multi-component handle sleeves. Features and benefits Each Kraftform Kompakt VDE set has been tested individually at 10,000 volts, in accordance with IEC 60900.This ten-times-higher testing load guarantees safe working at their maximum permitted load of 1,000 volts. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The Kraftform Kompakt VDE blades can be replaced simply by pulling down the yellow ring on the handle. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE 17 extra slim 1 Tool finder, 17 pieces 2x 817 VDE Kraftform blade-holding handle: 9 x 98 mm 2x Kraftform Kompakt VDE 62 iS Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 65 iS Take it easy: PZ 1x157 mm, PZ 2x157 mm 2x Kraftform Kompakt VDE 65 iS PZ/S Take it easy: # 1x157 mm, # 2x157 mm 1x Kraftform Kompakt VDE 67 i TORX® Take it easy: TX 10 x 157 mm 3x Kraftform Kompakt VDE 67 iS TORX® Take it easy: TX 15x157 mm, TX 20x157 mm, TX 25x157 mm 1x Kraftform Kompakt VDE 60 i Take it easy: 0.4 x 2.5 x 157 mm 3x Kraftform Kompakt VDE 60 iS Take it easy: 0.6x3.5x157 mm, 0.8x4x157 mm, 1x5.5x157 mm 1x KNIPEX VDE 13 96 200 pliers for electrical installation: KNIPEX VDE 13 96 200 pliers for electrical installation 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: Kraftform Kompakt VDE 17 extra slim 1 Tool Finder, 17-piece kpn: 05006612001 kpn_dash: kpn_clear: 05006612001 bkpn: WERA 05006612001 bkpn_clear: WERA 05006612001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006612001 sr_ns: WERA05006612001
r: 08103858 p: 73.057 pid: 70307 b: WERA q: 0 st: lt: 14 ean: 4013288229885 sr: WERA 05006619001 sr_no_br: 05006619001 sr_no_br_cl: 05006619001 sr_cl: WERA05006619001 sr_dash: sold: 1022.798 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved Yes ESD No Supplied in Case Quantity per set 17 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt VDE 17 RA Imperial 1 17-piece set - 05006619001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description 17-piece Kraftform Kompakt VDE set. One 837 i RA bladeholding screwdriver with ratchet functionality (40 teeth, 9° return angle), one 817 VDE bitholding screwdriver, 15 VDE blades with Take it easy Tool finder: Colour coding by profile and laser-engraved size indication. Individually tested tools as per IEC 60900. Individually tested in a water quench at 10,000 V for safe working at the approved voltage of 1,000 V. In a robust belt pouch. Imperial One Kraftform Kompakt VDE 837 i RA bladeholding screwdriver with ratchet functionality (40 teeth, 9° return angle) for interchangeable blades, one 817 VDE bladeholding screwdriver for interchangeable blades The 837 i RA bitholding screwdriver with a ratchet integrated in the handle ensures fast and safe working High working speed: The ratchet can also be used to "spin" when screwdriving Ergonomic intuitive switching to clockwise/counterclockwise or position 0 17-piece setOne 837 i RA bitholding screwdriver with ratchet functionality (40 teeth, 9° return angle), one 817 VDE bitholding screwdriver, each solely for Wera VDE blades. 15 VDE blades (each 157 mm length) with Take it easy Tool finder: Colour coding by profile and laser-engraved size indication Features and benefits Why is the right tool so often missing at the workplace? The reason: too many tools and overly-heavy tool bags can make it bothersome to carry keep them with you. So for us it was a clear challenge: to develop a tool that is suitable for a whole host of applications and can be easily taken along to the workplace. Our solution: Kraftform Kompakt tools. A handle into which blades with a range of different profiles can be inserted. Compactly and protectively housed in a light and robust textile pouch - and they are even VDE-tested, too. The integrated ratchet with fine toothing (40 teeth and a return angle of 9°) eases and accelerates screwdriving without having to reposition the tool. The ratchet mechanism also allows fast "spinning" while screwdriving. The bitholding screwdriver is suitable solely for Wera VDE blades. Kraftform Plus handle for comfortable ergonomic screwdriving, avoiding blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The Kraftform Kompakt VDE blades are equipped with the Take it easy Tool finder. The colour coding by profile and the laser-engraved size indication make it easy to identify the required tool quickly. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. ds: dsc: Scope of delivery Kraftform Kompakt VDE 17 RA Imperial 1, 17 pieces 1x 837 i RA Kraftform blade-holding handle with ratchet functionality: 9 x 115 mm 1x 817 VDE Kraftform blade-holding handle: 9 x 98 mm 2x Kraftform Kompakt VDE 62 i Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 65 i PZ/S Take it easy: # 1x157 mm, # 2x157 mm 4x Kraftform Kompakt VDE 67 i TORX® Take it easy: TX 10x157 mm, TX 15x157 mm, TX 20x157 mm, TX 25x157 mm 4x Kraftform Kompakt VDE 60 i Take it easy: 0.4x2.5x157 mm, 0.8x4x157 mm, 1x5.5x157 mm, 1.2x6.5x157 mm 1x Kraftform Kompakt VDE 60 iS Take it easy: 0.6 x 3.5 x 157 mm 2x Kraftform Kompakt VDE 68 i Take it easy: # 1x157 mm, # 2x157 mm kts: 17-piece set kpn: Kraftform Kompakt VDE 17 RA Imperial 1 kpn_dash: kpn_clear: KraftformKompaktVDE17RAImperial1 bkpn: WERA Kraftform Kompakt VDE 17 RA Imperial 1 bkpn_clear: WERA KraftformKompaktVDE17RAImperial1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006619001 sr_ns: WERA05006619001
r: 02743322 p: 109.876 pid: 45968 b: WERA q: 0 st: lt: 14 ean: 4013288169624 sr: WERA 05059293001 sr_no_br: 05059293001 sr_no_br_cl: 05059293001 sr_cl: WERA05059293001 sr_dash: sold: 988.884 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder type Internal hexagon VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 16 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 60 Torque screwdriver handle with interchangeable blades in folding case 17-piece - 05059293001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Pouch with bits in a length of 89 mm. Includes torque screwdriver 7441 with Rapidaptor quick-release chuck and multi-component Kraftform handle for low-fatigue working. Suitable for manual and power tool operations. 17-piece; compact handle/interchangeable blade system for torque-controlled tightening. Includes torque holder 7441, settings from 1.2 to 3.0 Nm. Adjustable in 0.10 Nm steps. Simple setting of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Includes 16 bits with a length of 89 mm and a practical pouch for tidy storage. Adjustable Kraftform torque screwdriver with Rapidaptor quick-release chuck Multi-component Kraftform handle for fast and ergonomic screwdriving Rapidaptor technology for rapid bit change Suitable for manual and power tool operations Practical pouch for tidy storage Pouch with 89 mm bits17-piece set1 Series 7400 Kraftform adjustable torque screwdriver (1.2-3.0 Nm) with Rapidaptor quick-release chuck Features and benefits Many screws - particularly in assembly and maintenance applications - have to be tightened with controlled torque to ensure the dependability of the screw connection and/or to avoid damage to the screw or work piece. Wera's adjustable torque screwdrivers are the ideal tool for this. They feature a torque range of 0.3 Nm to 8.8 Nm, two different handles, measurement accuracy of ± 6 % and Rapidaptor technology for rapid bit change. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Simple setting of the required torque by hand. Easy-to-read scale value. Measurement accuracy is ± 6 % in accordance with the standard EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The sets come with a Kraftform handle, quick-release chuck and bits for manual and power tool operations. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. The tools can be stored and carried in a robust belt pouch, keeping them always to hand. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery Kraftform Kompakt 60 Torque 1.2 - 3.0 Nm, 17 pieces 1x Series 7400 Kraftform adjustable torque screwdrivers (0.1-3.0 Nm) with Rapidaptor quick-release chuck: 7441 x 1.2-3.0 Nm 3x 851/4 Z bits: PH 1x89 mm, PH 2x89 mm, PH 3x89 mm 3x 855/4 Z bits: PZ 1x89 mm, PZ 2x89 mm, PZ 3x89 mm 5x 867/4 Z TORX® BO bits with bore hole: TX 10x89 mm, TX 15x89 mm, TX 20x89 mm, TX 25x89 mm, TX 30x89 mm 1x 800/4 Z bits: 1 x 5.5 x 89 mm 4x 840/4 Z bits: 3x89 mm, 4x89 mm, 5x89 mm, 6x89 mm kts: screwdriver handle with interchangeable blades in folding case 17-piece kpn: Kraftform Kompakt 60 Torque kpn_dash: kpn_clear: KraftformKompakt60Torque bkpn: WERA Kraftform Kompakt 60 Torque bkpn_clear: WERA KraftformKompakt60Torque c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05059293001 sr_ns: WERA05059293001
r: 08131777 p: 226.611 pid: 173564 b: WERA q: 0 st: lt: 7 ean: 4013288234148 sr: WERA 05006632001 sr_no_br: 05006632001 sr_no_br_cl: 05006632001 sr_cl: WERA05006632001 sr_dash: sold: 906.444 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Connection size 1/4" Supplied in Case Quantity per set 25 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt VDE 24 allround set 1 interchangeable pins set, 25-piece - 05006632001 cn: BIT AND HAND SOCKET SET cn2: BIT AND HAND SOCKET SET cn_clear: BITANDHANDSOCKETSET d: Product description The all-rounder set for VDE applications. Two bitholding screwdrivers 837 i RA and 817 VDE for Kraftform Kompakt VDE blades (837 i RA with ratchet functionality for accelerated screwdriving). 11 Kraftform Kompakt blades for slotted screws, Phillips-head screws (Phillips and Pozidriv) and TORX® screws. Even low-lying screw and spring elements can be reached thanks to the reduced blade diameter. The Take it easy tool finder (colour coding by profile as well as laser-engraved size indication) makes it easy to reach for the required blade. One T-handle with ratchet functionality for 1/4" sockets. The recesses in the fast-rotating sleeve on the blade allow resistance to be generated by finger force which allows the ratchet mechanism to be used even at low resistance of the screw. 9 sockets offer increased safety thanks to the 2-component insulation with a yellow insulation core under an outer red insulation layer. The inner yellow insulation layer becomes visible if the outer red VDE insulation layer is damaged. All tools are individually tested at 10,000 Volt as per IEC 60900. Space-saving and safe storage in a textile box. The textile box can be docked directly onto the Wera 2go transport system or attached to the workshop trolley, tool wall, etc with the included hook and loop fastener strip. Individually tested tools as per IEC 60900 One Kraftform Kompakt VDE 837 i RA bladeholding screwdriver with ratchet functionality (40 teeth, 9° return angle) for interchangeable blades, one 817 VDE bladeholding screwdriver for interchangeable blades One 410 i VDE A RA T-handle adapter screwdriver with ratchet functionality for 1/4" sockets and 1/4" bit sockets One Kraftform Kompakt A VDE 712 i adapter blade (1/4" external hexagon to 9 mm external hexagon) for 1/4" sockets and bit sockets VDE blades (157 mm length) with practical spinning function, anti-roll protection and Take it easy tool finder: colour coding by profile and laser-engraved size indication 24-piece setOne 837 i RA bitholding screwdriver with ratchet functionality, one 817 VDE bitholding screwdriver, one 410 i VDE A RA T-handle with ratchet functionality. All handles suitable for mounting Kraftform Kompakt VDE blades and Kraftform Kompakt VDE adapter blades, one Kraftform Kompakt A VDE 712 i adapter blade (1/4" external hexagon to 9 mm external hexagon), 11 Kraftform Kompakt VDE blades (with Take it easy toolfinder: colour coding by profile and laser-engraved size indication), most of which with reduced blade diameter, for slotted screws, Phillips-head screws Phillips and Pozidriv and TORX® screws, 9x 8790 A VDE sockets, 1/4". All tools insulated and individually tested at 10,000 Volt as per IEC 60900.In a robust textile box. Features and benefits The handle/blade system - Kraftform Kompakt VDE The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The integrated ratchet with fine toothing (40 teeth and a return angle of 9°) eases and accelerates screwdriving without having to reposition the tool. The bitholding screwdriver is suitable solely for Wera VDE blades. Kraftform Plus handle for comfortable ergonomic screwdriving, avoiding blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The VDE-insulated T-handle 410 i VDE A RA adapter screwdriver may only be used with the 1/4" VDE bit sockets and sockets from the Wera Zyklop VDE series 8740, 8760, 8767 and 8790. The direction of the fine-tooth ratchet mechanism can easily be changed via the smooth switch lever. The recesses in the fast-rotating sleeve allow resistance to be generated by finger force. This allows the ratchet mechanism to be used even at low resistance of the screw. The 157 mm length blades are suitable for Wera Kraftform Kompakt handles with 9 mm hexagonal blade mounting. ds: dsc: Scope of delivery Kraftform Kompakt VDE 24 Allrounder Set 1, 25 pieces 1x 837 i RA Kraftform blade-holding handle with ratchet functionality: 9 x 115 mm 1x 817 VDE Kraftform blade-holding handle: 9 x 98 mm 1x 410 i VDE A RA VDE-insulated T-handle adapter screwdriver with ratchet functionality for 1/4" sockets: 1/4" x 130 mm 2x Kraftform Kompakt VDE 60 i Take it easy: 0.4x2.5x157 mm, 1.2x6.5x157 mm 2x Kraftform Kompakt VDE 60 iS Take it easy: 0.6x3.5x157 mm, 0.8x4x157 mm 2x Kraftform Kompakt VDE 62 iS Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 65 iS Take it easy: PZ 1x157 mm, PZ 2x157 mm 3x Kraftform Kompakt VDE 67 iS TORX® Take it easy: TX 15x157 mm, TX 20x157 mm, TX 25x157 mm 1x Kraftform Kompakt A VDE 712 i Adapter blade, insulated, for 1/4" sockets: 1/4" x 154 mm 9x 8790 A VDE Zyklop Socket, insulated, with 1/4" drive: 5x41 mm, 5.5x41 mm, 6x41 mm, 7x41 mm, 8x41 mm, 10x41 mm, 11x41 mm, 12x41 mm, 13x41 mm 1x 9575 Textile box Kraftform Kompakt VDE 24 Allrounder 1, without tools: 230 x 105 x 50 mm kts: interchangeable pins set, 25-piece kpn: Kraftform Kompakt VDE 24 allround set 1 kpn_dash: kpn_clear: KraftformKompaktVDE24allroundset1 bkpn: WERA Kraftform Kompakt VDE 24 allround set 1 bkpn_clear: WERA KraftformKompaktVDE24allroundset1 c_path: Home / Tools / Hand tools / Mixed sets / Single sets / Bit and hand socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera single sets / Wera bit and hand socket set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006632001 sr_ns: WERA05006632001
r: 08085429 p: 124.628 pid: 72009 b: WERA q: 0 st: lt: 7 ean: 4013288225344 sr: WERA 05150150001 sr_no_br: 05150150001 sr_no_br_cl: 05150150001 sr_cl: WERA05150150001 sr_dash: sold: 747.768 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Bit holder type Inner hexagon VDE approved No With safety colour code 1000V ESD No Material (module) Foam rubber Product Range Wera Kraftform Kompakt n: WERA 9750 Kraftform Kompakt tool set + Tool-Check PLUS Set 1 in foam insert 57-piece - 05150150001 cn: BIT SCREWDRIVERS MODULE cn2: BIT SCREWDRIVERS MODULE cn_clear: BITSCREWDRIVERSMODULE d: Product description Durable foam insert; two-coloured for quick identification of missing parts; suitable for the Tool Rebel roller cabinet; equipped with Wera Kraftform Kompakt 60, Tool-Check PLUS as well as 393 S extra slim bitholding screwdriver with flexible shaft. Durable foam insert, each tool has its own place; two-coloured, missing tools will quickly be noticed High-quality, durable foam insert without chemical vapours Optimum fit for the best possible removal of the tools from the foam insert Water- and oil-repellent, low maintenance and easy to clean Protection of the tool from dirt and impact 57-piece tool set (1 Tool-Check PLUS (39 pieces), 1 Kraftform Kompakt 60 (16 pieces) and one bitholding screwdriver with flexible shaft), in a two-coloured foam insert for the Tool Rebel roller cabinet. Width x height x depth: without tools 172 x 30 x 392 mm, with tools 172 x 59 x 392 mm. Features and benefits The tools sit securely in the foam thanks to precise contour cutouts, but are easy to remove. The carefully designed arrangement of the tools ensures space-saving storage and quick access to each tool. After removing the tool the light grey second foam becomes visible and therefore missing tools are quickly identified. Tool combination of 1/4" Zyklop Mini ratchet, sockets, one bitholding screwdriver and bits in a space-saving Tool-Check PLUS case made of robust plastic. High working speeds can be attained with the Zyklop Mini bit ratchet. The thumb wheel is important, enabling more rapid screwdriving, and the lever of the Zyklop Mini only needs to be used for the final tightening of the screw. The fine tooth mechanism, with its 60 teeth, allows a small return angle of only 6° - ideal for precision work. Folding bag with 16 bits (89 mm long) and one 816 R bitholding screwdriver with Rapidaptor quick-release chuck The particularly slim bit holder allows working in very tight work spaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 9750 Foam insert Kraftform Kompakt and Tool-Check PLUS set 1, 57 pieces 1x Tool-Check PLUS, 39 pieces 1x 8001 A Bit Ratchet 1/4": 1/4" x 87 mm 1x 813 Bitholding screwdriver: 1/4" x 78 mm 1x 889/4/1 K Rapidaptor Universal Bit Holder: 1/4" x 50 mm 1x 870/1 Adaptor: 1/4" x 25 mm 7x 8790 HMA Zyklop 1/4" socket: 5.5x23 mm, 6x23 mm, 7x23 mm, 8x23 mm, 10x23 mm, 12x23 mm, 13x23 mm 6x 851/1 TZ bits: 2x PH 1x25 mm, 3x PH 2x25 mm, PH 3x25 mm 5x 855/1 TH bits: PZ 1x25 mm, 3x PZ 2x25 mm, PZ 3x25 mm 6x 867/1 TZ TORX® bits: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm, TX 40x25 mm 5x 867/1 Z TORX® BO bits with bore hole: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm 5x 840/1 Z bits: 3x25 mm, 4x25 mm, 5x25 mm, 6x25 mm, 8x25 mm 1x 800/1 TZ bits: 1 x 5.5 x 25 mm 1x Kraftform Kompakt 60, 17 pieces 1x 816 R Bitholding screwdriver with Rapidaptor quick-release chuck: 1/4" x 119 mm 3x 851/4 Z bits: PH 1x89 mm, PH 2x89 mm, PH 3x89 mm 3x 855/4 Z bits: PZ 1x89 mm, PZ 2x89 mm, PZ 3x89 mm 5x 867/4 Z TORX® BO bits with bore hole: TX 10x89 mm, TX 15x89 mm, TX 20x89 mm, TX 25x89 mm, TX 30x89 mm 1x 800/4 Z bits: 1 x 5.5 x 89 mm 4x 840/4 Z bits: 3x89 mm, 4x89 mm, 5x89 mm, 6x89 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm 1x 393 S Bitholding screwdriver extra slim with flexible shaft, 1/4" x 173.5 mm 1x 9850 Foam insert Kraftform Kompakt and Tool-Check PLUS set 1, empty, 172 x 30 x 392 mm kts: tool set + Tool-Check PLUS Set 1 in foam insert 57-piece kpn: 9750 Kraftform Kompakt kpn_dash: kpn_clear: 9750KraftformKompakt bkpn: WERA 9750 Kraftform Kompakt bkpn_clear: WERA 9750KraftformKompakt c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdrivers module | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdrivers module | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05150150001 sr_ns: WERA05150150001
r: 02829186 p: 39.008 pid: 42750 b: WERA q: 0 st: lt: 12 ean: 4013288178343 sr: WERA 05135938001 sr_no_br: 05135938001 sr_no_br_cl: 05135938001 sr_cl: WERA05135938001 sr_dash: sold: 741.152 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder type Halfmoon/HIOS VDE approved No With safety colour code 1000V ESD No Quantity per set 11 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt Micro 11 Universal 1 screwdriver handle fine mechanical applications, with interchangeable blades 11-piece - 05135938001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Kraftform Kompakt Micro Set for precision mechanical applications; suitable for the take-up of bits with 4 mm halfmoon drive (Wera series 9) and bits with 4 mm HIOS drive (Wera series 21); handle/interchangeable blade system for rapid blade change; Kaftform Micro handle with twist cap and free-turning zone for rapid twisting, making any time-consuming repositioning of the fingers unnecessary; power zone with integrated soft zones for the transfer of higher tightening and loosening torque; precision zone directly above the blade for the right angle for adjustment work; comes with 10 bits for manual as well as power tool operations; rapid fixing of the bit: just push the bit into the insert for automatic locking and a secure fit. To change the bit, simply push the sleeve forward and remove; free-turning sleeve for simple guidance of the tool during the screwdriving process. Kraftform Micro bit holder for precision mechanical work Handle/Interchangeable blade system for rapid exchange of the blade Multi-component Kraftform Micro handle with anti-roll feature and rotating cap Suitable for take-up of bits with 4 mm halfmoon drive and bits with 4 mm HIOS drive Applications e.g. on smartphones, mobile phones, cameras, electronic equipment 11-piece setPouch with 44 mm bits1 Kraftform Micro bitholding screwdriver 1013 Features and benefits Applications e.g. on smartphones, mobile phones, cameras, electronic equipment Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. ds: dsc: Scope of delivery Kraftform Kompakt Micro 11 Universal 1, 11 pieces 1x 1013 Kraftform Micro Bitholding screwdriver: 97 mm 3x 851/9 C J PH bits, halfmoon: PH 00 x 44x1.8 mm, PH 0 x 44x2.2 mm, PH 1 x 44x3 mm 2x 840/9 C bits Hex-Plus: 1.5x44 mm, 2x44 mm 3x 800/9 C bits: 0.23x1.5x44 mm, 0.40x2x44 mm, 0.50x3x44 mm 2x 867/9 C TORX® bits, halfmoon: TX 5x44 mm, TX 6x44 mm kts: screwdriver handle fine mechanical applications, with interchangeable blades 11-piece kpn: Kraftform Kompakt Micro 11 Universal 1 kpn_dash: kpn_clear: KraftformKompaktMicro11Universal1 bkpn: WERA Kraftform Kompakt Micro 11 Universal 1 bkpn_clear: WERA KraftformKompaktMicro11Universal1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05135938001 sr_ns: WERA05135938001
r: 03334694 p: 46.115 pid: 159672 b: WERA q: 4 st: 1 lt: 1 ean: 4013288229922 sr: WERA 05006607001 sr_no_br: 05006607001 sr_no_br_cl: 05006607001 sr_cl: WERA05006607001 sr_dash: sold: 691.725 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved Yes With safety colour code 1000V No ESD No Supplied in Case Quantity per set 16 Product Range Wera Kraftform Kompakt n: WERA 05006607001 Kraftform Kompakt VDE 16 Universal 1 Tool Finder, 16-piece cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description One 817 VDE Kraftform bitholding screwdriver, 14 VDE blades with Take it easy Tool finder: Colour coding by profile and laser-engraved size indication - for quick and easy identification of the required tool, one single-pole phase tester. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. In a robust belt pouch. The textile box features a fleece zone at the back. Using the provided self-adhesive hook and loop fastener strips, the textile box can be attached to the Wera 2go components. Or to the wall, shelf or workshop trolley. VDE-insulated Kraftform 817 VDE bladeholding screwdriver with anti-roll protection Hexagonal anti-roll feature against rolling away Individually tested tools as per IEC 60900 at 10,000 V In a robust folding pouch Compatible with Wera 2go 16-piece setOne Kraftform 817 VDE bitholding screwdriver solely for Wera VDE blades14 VDE blades (each 157 mm length) with Take it easy Tool finder with colour coding by profile and laser-engraved size indication, one single-pole phase testerIn a robust belt pouch Features and benefits Why is the right tool so often missing at the workplace? The reason: too many tools and overly-heavy tool bags can make it bothersome to carry keep them with you. So for us it was a clear challenge: to develop a tool that is suitable for a whole host of applications and can be easily taken along to the workplace. Our solution: Kraftform Kompakt tools. A handle into which blades with a range of different profiles can be inserted. Compactly and protectively housed in a light and robust textile pouch - and they are even VDE-tested, too. Each Kraftform Kompakt VDE set has been tested individually at 10,000 volts, in accordance with IEC 60900.This ten-times-higher testing load guarantees safe working at their maximum permitted load of 1,000 volts. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The Kraftform Kompakt VDE blades can be replaced simply by pulling down the yellow ring on the handle. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE 16 Universal 1 Tool finder, 16 pieces 1x 817 VDE Kraftform blade-holding handle: 9 x 98 mm 2x Kraftform Kompakt VDE 62 i Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 65 i Take it easy: PZ 1x157 mm, PZ 2x157 mm 2x Kraftform Kompakt VDE 65 i PZ/S Take it easy: # 1x157 mm, # 2x157 mm 4x Kraftform Kompakt VDE 67 i TORX® Take it easy: TX 10x157 mm, TX 15x157 mm, TX 20x157 mm, TX 25x157 mm 4x Kraftform Kompakt VDE 60 i Take it easy: 0.4x2.5x157 mm, 0.6x3.5x157 mm, 0.8x4x157 mm, 1x5.5x157 mm 1x 247 Single-pole phase tester: 0.5 x 3 x 70 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: Kraftform Kompakt VDE 16 Universal 1 Tool Finder, 16-piece kpn: 05006607001 kpn_dash: kpn_clear: 05006607001 bkpn: WERA 05006607001 bkpn_clear: WERA 05006607001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006607001 sr_ns: WERA05006607001
r: 03176969 p: 14.38 pid: 31966 b: WERA q: 0 st: lt: 8 ean: 4013288217769 sr: WERA 05008873001 sr_no_br: 05008873001 sr_no_br_cl: 05008873001 sr_cl: WERA05008873001 sr_dash: sold: 690.24 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved No ESD No Quantity per set 6 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt Stubby Magazin 1 compact screwdriver with internal bit magazine 6-piece - 05008873001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Particularly small bitholding screwdriver with short bit mounting for hard to reach areas. Includes 6 bits, which are located in a magazine in the handle. With only 65mm total length, the Kraftform Kompakt Stubby is a real mini screwdriving workshop. The strong permanent magnet in the bit mounting ensures secure holding of the bit. The 2-component handle with the practical combination of hard and soft zones allows for a firm grip and precise working. Take it easy tool finder: With size stamping and colour coding by output to find the required bit easily. Short, compact Stubby shape for working in tight installation spaces, with 6 bits in the integrated magazine Ergonomic 2-component Kraftform handle for precise work 1/4" bit mounting with strong permanent magnet Captive and swivelling bit magazine for easy removal and safe storage of bits Take it easy tool finder: colour coding according to profile and size Application Suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and Wera connection series 1 Design Bit holder with strong permanent magnet; BiTorsion bits for long service life, tough, for universal use. Take it easy tool finder: Size stamping and tips with colour coding to find the required bit quickly. Handle Kraftform Stubby with anti-roll protection, multi-component, integrated magazine Features and benefits The handle can be opened and thus gives access to the six bits contained in the magazine. With its compact handle shape and the short blade, the Kraftform Stubbies are particularly suitable for working in confined screwdriving situations. The swivelling bit magazine allows for the bits to be removed easily in almost any situation and cannot be lost. The bits are safely stored. Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. With softer BiTorsion zone to prevent the bit tip from twisting at high loads. This significantly increases product life. Tough design for universal use. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The magnet ensures that the bit is securely seated in the holder. ds: dsc: Scope of delivery Kraftform Kompakt Stubby magazine 1, 6 pieces 2x 851/1 BTZ bits: PH 1x25 mm, PH 2x25 mm 3x 867/1 BTZ TORX® bits: TX 15x25 mm, TX 20x25 mm, TX 25x25 mm 1x 800/1 BTZ bits: 0.8 x 5.5 x 25 mm kts: compact screwdriver with internal bit magazine 6-piece kpn: Kraftform Kompakt Stubby Magazin 1 kpn_dash: kpn_clear: KraftformKompaktStubbyMagazin1 bkpn: WERA Kraftform Kompakt Stubby Magazin 1 bkpn_clear: WERA KraftformKompaktStubbyMagazin1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05008873001 sr_ns: WERA05008873001
r: 08107992 p: 137.148 pid: 159689 b: WERA q: 1 st: 1 lt: 1 ean: 4013288229915 sr: WERA 05006605001 sr_no_br: 05006605001 sr_no_br_cl: 05006605001 sr_cl: WERA05006605001 sr_dash: sold: 685.74 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved Yes ESD No Product Range Wera Kraftform Kompakt n: WERA 05006605001 Kraftform Kompakt VDE 15 Torque 1.2-3.0 Nm extra slim 1 Tool Finder, 15-piece cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description 15-piece torque VDE blade set. One torque VDE bladeholding screwdriver with adjustable torque value from 1.2-3.0 Nm. With ergonomic Kraftform Plus handle, with hard handle zones ensuring high working speeds while soft handle zones guarantee a high torque transfer. Includes 14 blades (12 of which with reduced blade diameter) with integrated protective insulation. With Take it easy Tool finder: Colour coding by profile and laser-engraved size indication - for quick and easy identification of the required tool. In a robust belt pouch. The textile box features a fleece zone at the back. Using the provided self-adhesive hook and loop fastener strips, the textile box can be attached to the Wera 2go components. Or to the wall, shelf or workshop trolley. Kraftform Kompakt VDE torque screwdriver set with adjustable torque Adjustable Kraftform VDE torque holder exclusively for Wera VDE interchangeable blades VDE blades (157 mm length) with practical spinning function, anti-roll protection and Take it easy tool finder: colour coding by profile and laser-engraved size indication Individually tested tools as per IEC 60900 In a robust folding pouch 15-piece setOne series 7400 VDE Kraftform adjustable torque bitholding screwdriver (1.2 - 3.0 Nm) solely for Wera VDE blades14 VDE blades (each 157 mm length) with Take it easy Tool finder with colour coding by profile and laser-engraved size indication; with reduced blade diameter (items Kraftform Kompakt 60 i Take it easy 0.4x2.5 and Kraftform Kompakt 67 i Take it easy TX 10 standard blade diameter) with integrated protective insulation, low-lying screw and spring elements can be easily reached and operatedIn a robust belt pouch Features and benefits Each Kraftform Kompakt VDE set has been tested individually at 10,000 volts, in accordance with IEC 60900.This ten-times-higher testing load guarantees safe working at their maximum permitted load of 1,000 volts. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Easy-to-read scale value. Measurement accuracy is ± 6 % in accordance with the standard EN ISO 6789. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. Simple setting of the required torque by hand. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. ds: dsc: Scope of delivery Kraftform Kompakt VDE 15 Torque 1.2-3.0 Nm extra slim 1 Tool Finder, 15 pieces 1x Series 7400 VDE Kraftform adjustable torque handle (0.3-3.5 Nm): 7441 VDE x 1.2-3.0 Nm 2x Kraftform Kompakt VDE 62 iS Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 65 iS Take it easy: PZ 1x157 mm, PZ 2x157 mm 2x Kraftform Kompakt VDE 65 iS PZ/S Take it easy: # 1x157 mm, # 2x157 mm 1x Kraftform Kompakt VDE 67 i TORX® Take it easy: TX 10 x 157 mm 3x Kraftform Kompakt VDE 67 iS TORX® Take it easy: TX 15x157 mm, TX 20x157 mm, TX 25x157 mm 1x Kraftform Kompakt VDE 60 i Take it easy: 0.4 x 2.5 x 157 mm 3x Kraftform Kompakt VDE 60 iS Take it easy: 0.6x3.5x157 mm, 0.8x4x157 mm, 1x5.5x157 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: Kraftform Kompakt VDE 15 Torque 1.2-3.0 Nm extra slim 1 Tool Finder, 15-piece kpn: 05006605001 kpn_dash: kpn_clear: 05006605001 bkpn: WERA 05006605001 bkpn_clear: WERA 05006605001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006605001 sr_ns: WERA05006605001
r: 03336644 p: 140.165 pid: 159675 b: WERA q: 0 st: lt: 14 ean: 4013288229953 sr: WERA 05006609001 sr_no_br: 05006609001 sr_no_br_cl: 05006609001 sr_cl: WERA05006609001 sr_dash: sold: 560.66 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved Yes With safety colour code 1000V No ESD No Supplied in Case Quantity per set 16 Product Range Wera Kraftform Kompakt n: WERA 05006609001 Kraftform Kompakt VDE 16 Torque 1.2-3.0 Nm extra slim 1 Tool Finder, 16-piece cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description 16-piece torque VDE blade set. Includes 14 blades (12 of which with reduced blade diameter) with integrated protective insulation. With Take it easy Tool finder: Colour coding by profile and laser-engraved size indication - for quick and easy identification of the required tool. Torque VDE bladeholding screwdriver with adjustable torque value from 1.2-3.0 Nm and 817 VDE bitholding screwdriver. Both with ergonomic Kraftform Plus handle, with hard handle zones ensuring high working speeds while soft handle zones guarantee a high torque transfer. Kraftform Kompakt VDE torque screwdriver set with adjustable torque Adjustable Kraftform VDE torque holder exclusively for Wera VDE interchangeable blades VDE-insulated Kraftform 817 VDE bladeholding screwdriver with anti-roll protection VDE blades (157 mm length) with practical spinning function, anti-roll protection and Take it easy tool finder: colour coding by profile and laser-engraved size indication Individually tested tools as per IEC 60900 16-piece setOne series 7400 VDE Kraftform adjustable torque bitholding screwdriver (1.2 - 3.0 Nm) and one 817 VD bitholding screwdriver; solely for Wera VDE blades14 VDE blades (each 157 mm length) with Take it easy Tool finder with colour coding by profile and laser-engraved size indication; with reduced blade diameter (items Kraftform Kompakt 60 i Take it easy 0.4x2.5 and Kraftform Kompakt 67 i Take it easy TX 10 standard blade diameter) with integrated protective insulation, low-lying screw and spring elements can be easily reached and operatedIn a robust belt pouch Features and benefits Each Kraftform Kompakt VDE set has been tested individually at 10,000 volts, in accordance with IEC 60900.This ten-times-higher testing load guarantees safe working at their maximum permitted load of 1,000 volts. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Easy-to-read scale value. Measurement accuracy is ± 6 % in accordance with the standard EN ISO 6789. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE 16 Torque 1.2-3.0 Nm extra slim 1 Tool Finder, 16 pieces 1x Series 7400 VDE Kraftform adjustable torque handle (0.3-3.5 Nm): 7441 VDE x 1.2-3.0 Nm 1x 817 VDE Kraftform blade-holding handle: 9 x 98 mm 2x Kraftform Kompakt VDE 62 iS Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 65 iS Take it easy: PZ 1x157 mm, PZ 2x157 mm 2x Kraftform Kompakt VDE 65 iS PZ/S Take it easy: # 1x157 mm, # 2x157 mm 1x Kraftform Kompakt VDE 67 i TORX® Take it easy: TX 10 x 157 mm 3x Kraftform Kompakt VDE 67 iS TORX® Take it easy: TX 15x157 mm, TX 20x157 mm, TX 25x157 mm 1x Kraftform Kompakt VDE 60 i Take it easy: 0.4 x 2.5 x 157 mm 3x Kraftform Kompakt VDE 60 iS Take it easy: 0.6x3.5x157 mm, 0.8x4x157 mm, 1x5.5x157 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: Kraftform Kompakt VDE 16 Torque 1.2-3.0 Nm extra slim 1 Tool Finder, 16-piece kpn: 05006609001 kpn_dash: kpn_clear: 05006609001 bkpn: WERA 05006609001 bkpn_clear: WERA 05006609001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006609001 sr_ns: WERA05006609001
r: 03321877 p: 78.016 pid: 71958 b: WERA q: 2 st: 1 lt: 1 ean: 4013288228352 sr: WERA 05057114001 sr_no_br: 05057114001 sr_no_br_cl: 05057114001 sr_cl: WERA05057114001 sr_dash: sold: 546.112 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder type Internal hexagon VDE approved No With safety colour code 1000V ESD No Quantity per set 33 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 71 Security bit assortment 33-piece - 05057114001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description 32-piece set with 816 R Kraftform bitholding screwdriver with Rapidaptor quick-release chuck and multi-component Kraftform handle for fatigue-free working. Rapidaptor universal holder with strong permanent magnet, which even holds big and heavy screws. Throw in the 30 bits and the user is equipped for almost every application. In a robust textile box; compatible with Wera 2go. 32-piece set Strong permanent magnet Rapidaptor quick-release chuck allows rapid bit change Tough viscous bits for universal use Assortment in robust textile box with low weight for easy transport 32-piece setOne 816 R Kraftform bitholding screwdriver with Rapidaptor quick-release chuck, one Rapidaptor 889/4/1 K universal holder Features and benefits The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The sets come with a Kraftform handle, quick-release chuck and bits for manual and power tool operations. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. Robust textile box that keeps the tools safe during transport and always close at hand. The textile box is suitable for attachment to the wall or shelf thanks to the hook and loop fastener strips on the back. ds: dsc: Scope of delivery Kraftform Kompakt 71 Security, 32 pieces 1x 816 R Bitholding screwdriver with Rapidaptor quick-release chuck: 1/4" x 119 mm 1x 889/4/1 K Rapidaptor Universal Bit Holder: 1/4" x 50 mm 9x 867/1 Z TORX® BO bits with bore hole: TX 7x25 mm, TX 8x25 mm, TX 9x25 mm, TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm, TX 40x25 mm 6x 840/1 Z Tamper-proof Hex-Plus BO bits: 2x25 mm, 2.5x25 mm, 3x25 mm, 4x25 mm, 5x25 mm, 6x25 mm 4x 868/1 Z Square-Plus bits: # 0x25 mm, # 1x25 mm, # 2x25 mm, # 3x25 mm 4x 871/1 TORQ-SET® Mplus bits, 25 mm: 6x25 mm, 8x25 mm, 10x25 mm, 1/4"x25 mm 3x 875/1 TRI-WING® bits, 25 mm: 1x25 mm, 2x25 mm, 3x25 mm 4x 857/1 Z Spanner bits: 4x25 mm, 6x25 mm, 8x25 mm, 10x25 mm 1x 9478 Kraftform Kompakt 70/71 Textile box, empty: 160 x 95 x 65 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: bit assortment 33-piece kpn: Kraftform Kompakt 71 Security kpn_dash: kpn_clear: KraftformKompakt71Security bkpn: WERA Kraftform Kompakt 71 Security bkpn_clear: WERA KraftformKompakt71Security c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05057114001 sr_ns: WERA05057114001
