r: 03176902 p: 24.132 pid: 31409 b: WERA q: 0 st: lt: 8 ean: 4013288218865 sr: WERA 05020504001 sr_no_br: 05020504001 sr_no_br_cl: 05020504001 sr_cl: WERA05020504001 sr_dash: sold: 120.66 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 27 mm Length 300 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (27 x 300 mm) - 05020504001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 27 x 300 mm kts: ring spanner (27 x 300 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020504001 sr_ns: WERA05020504001
r: 02833286 p: 22.975 pid: 41584 b: WERA q: 0 st: lt: 13 ean: 4013288154118 sr: WERA 05133180001 sr_no_br: 05133180001 sr_no_br_cl: 05133180001 sr_cl: WERA05133180001 sr_dash: sold: 114.875 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Min. width across flats 5/64 inch With ball head Yes Quantity per set 9 Product Range Wera Hex-Plus n: WERA 950/9 Hex-Plus Imperial 1 SB SiS socket wrench set inch BlackLaser 9-piece - 05133180001 cn: HEX KEY SET cn2: HEX KEY SET cn_clear: HEXKEYSET d: Product description High quality L-key set for imperial hexagonal socket screws in a practical clip fastener out of wear-resistant material, enabling secure storage of the L-keys as well as simple removal. Hex-Plus profile: offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer BlackLaser for high corrosion protection and long service life L-keys are quickly to hand thanks to their size markings Wear-resistant clip material for enhanced durability 9-piece set in a two-component clip Application Hexagon socket screws Design BlackLaser surface Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. L-keys with BlackLaser surface treatment for outstanding surface protection and long service life. High corrosion protection. The wear-resistant clip material ensures that the L-keys are securely held yet are easy to remove. ds: dsc: Scope of delivery 950/9 Hex-Plus Imperial 1 SB L-key set, Imperial, BlackLaser, 9 pieces 9x 950 PKL L-key, Imperial, BlackLaser: 5/64"x100 mm, 3/32"x112 mm, 1/8"x126 mm, 5/32"x140 mm, 3/16"x160 mm, 7/32"x180 mm, 1/4"x190 mm, 5/16"x200 mm, 3/8"x212 mm kts: socket wrench set inch BlackLaser 9-piece kpn: 950/9 Hex-Plus Imperial 1 SB SiS kpn_dash: 950/9 Hex kpn_clear: 9509HexPlusImperial1SBSiS bkpn: WERA 950/9 Hex-Plus Imperial 1 SB SiS bkpn_clear: WERA 9509HexPlusImperial1SBSiS c_path: Home / Tools / Hand tools / Keys / Sets / Hex key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera hex key set | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05133180001 sr_ns: WERA05133180001
r: 03176907 p: 16.363 pid: 33861 b: WERA q: 0 st: lt: 15 ean: 4013288218797 sr: WERA 05020500001 sr_no_br: 05020500001 sr_no_br_cl: 05020500001 sr_cl: WERA05020500001 sr_dash: sold: 114.541 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 20 mm Length 230 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (20 x 230 mm) - 05020500001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 20 x 230 mm kts: ring spanner (20 x 230 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020500001 sr_ns: WERA05020500001
r: 02833237 p: 5.55 pid: 41432 b: WERA q: 0 st: lt: 8 ean: 4013288041234 sr: WERA 05022073001 sr_no_br: 05022073001 sr_no_br_cl: 05022073001 sr_cl: WERA05022073001 sr_dash: sold: 111 p_range: none type: standard act: 1 avo: 1 av: Width across flats 9/64" With ball head Yes With handle No Handle type VDE approved No With safety colour code 1000V No Non-sparking No Blade length 132 mm Short arm length 23 mm Overall length 132 mm n: WERA 950 PKL socket spanner blacklaser 9/64" x 132 mm - 05022073001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description High quality L-keys for imperial hexagonal socket screws. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer Hexagonal ballpoint on the long arm BlackLaser for high corrosion protection and long service life Imperial Application Hexagon socket screws Design BlackLaser surface Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. Chrome-plated hexagon L-keys for outstanding surface protection and long service life. High corrosion protection. ds: dsc: Scope of delivery 950 PKL L-key, Imperial, BlackLaser, 9/64" x 132 mm kts: socket spanner blacklaser 9/64" x 132 mm kpn: 950 PKL kpn_dash: kpn_clear: 950PKL bkpn: WERA 950 PKL bkpn_clear: WERA 950PKL c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05022073001 sr_ns: WERA05022073001
r: 03176911 p: 8.429 pid: 32960 b: WERA q: 0 st: lt: 15 ean: 4013288220097 sr: WERA 05020219001 sr_no_br: 05020219001 sr_no_br_cl: 05020219001 sr_cl: WERA05020219001 sr_dash: sold: 109.577 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 9 mm Length 120 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (9 x 120 mm) - 05020219001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 9 x 120 mm kts: ring spanner (9 x 120 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020219001 sr_ns: WERA05020219001
r: 02833749 p: 7.64 pid: 41890 b: WERA q: 0 st: lt: 11 ean: 4013288167873 sr: WERA 05022608001 sr_no_br: 05022608001 sr_no_br_cl: 05022608001 sr_cl: WERA05022608001 sr_dash: sold: 106.96 p_range: none type: standard act: 1 avo: 1 av: Width across flats 4 mm With ball head Yes With handle No Handle type VDE approved No With safety colour code 1000V No Non-sparking No Blade length 137 mm Short arm length 24 mm Overall length 137 mm n: WERA 950 SPKL socket spanner multicolour metric 4 x 137 mm - 05022608001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description Premium Wera L-key with colour-coded, convenient hose sleeve, which makes the tool easily accessible and the ergonomic and comfortable handle is easy on the hands even at low temperatures. The Hex Plus profile offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw head is almost eliminated. The ball on the long arm allows safe working even in difficult installation positions. The BlackLaser surface treatment makes for excellent surface protection, even from corrosion, and for long durability. Lasered and therefore abrasion-proof size marking on the L-key for quick access. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer Colour coded, easy-to-grip plastic sleeve, even at low temperatures Hexagonal ballpoint on the long arm Wear-resistant size marking Application Hexagon socket screws Design BlackLaser surface, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. L-keys made from circular material fit into the hand better and allow less strenuous work over a longer period. Additionally, the rubber sleeve provides a pleasant grip, particularly in applications at low temperatures. Colour coding and large stamp enable the desired L-key to be easily located. Moreover, the round material keys are more robust, particularly where smaller sizes are concerned. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 950 SPKL L-key Multicolour, metric, 4 x 137 mm kts: socket spanner multicolour metric 4 x 137 mm kpn: 950 SPKL kpn_dash: kpn_clear: 950SPKL bkpn: WERA 950 SPKL bkpn_clear: WERA 950SPKL c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05022608001 sr_ns: WERA05022608001
r: 03228414 p: 7.63 pid: 71630 b: WERA q: 0 st: lt: 10 ean: 4013288188342 sr: WERA 05022200001 sr_no_br: 05022200001 sr_no_br_cl: 05022200001 sr_cl: WERA05022200001 sr_dash: sold: 106.82 p_range: none type: standard act: 1 avo: 1 av: Width across flats 3 mm With ball head Yes With handle No Handle type VDE approved No With safety colour code 1000V No Non-sparking No Blade length 123 mm Short arm length 21 mm Overall length 123 mm n: WERA 950 SPKL HF socket spanner multi-colour metric with holding function 3 x 123 mm - 05022200001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description High quality Wera L-keys with colour coded, convenient plastic sleeve. This means that the tool is quickly accessible and the ergonomic and pleasant handle is easy on the hands even at low temperatures. The Hex-Plus profile offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The holding function holds screws securely on the tool. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer Colour coded, easy-to-grip plastic sleeve, even at low temperatures Hexagonal ballpoint on the long arm The holding function holds screws securely on the tool Application Hexagon socket screws Design BlackLaser surface, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip Hex-Plus, ball-end hexagon on long arm, holding function for hexagon socket screws Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. The clamping of the screw is achieved by a flexible locking ball. The holding function is especially helpful in confined, hard-to-reach spaces, where there is no room for a second hand to secure the screw on the tool. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. L-keys made from circular material fit into the hand better and allow less strenuous work over a longer period. Additionally, the rubber sleeve provides a pleasant grip, particularly in applications at low temperatures. Colour coding and large stamp enable the desired L-key to be easily located. Moreover, the round material keys are more robust, particularly where smaller sizes are concerned. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 950 SPKL HF L-key Multicolour, metric, with holding function, 3 x 123 mm kts: socket spanner multi-colour metric with holding function 3 x 123 mm kpn: 950 SPKL HF kpn_dash: kpn_clear: 950SPKLHF bkpn: WERA 950 SPKL HF bkpn_clear: WERA 950SPKLHF c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05022200001 sr_ns: WERA05022200001
r: 03176912 p: 7.603 pid: 32966 b: WERA q: 1 st: 1 lt: 1 ean: 4013288218780 sr: WERA 05020198001 sr_no_br: 05020198001 sr_no_br_cl: 05020198001 sr_cl: WERA05020198001 sr_dash: sold: 106.442 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 6 mm Length 105 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (6 x 105 mm) - 05020198001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 6 x 105 mm kts: ring spanner (6 x 105 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020198001 sr_ns: WERA05020198001
r: 02832851 p: 10.578 pid: 41407 b: WERA q: 0 st: lt: 11 ean: 4013288112286 sr: WERA 05021737001 sr_no_br: 05021737001 sr_no_br_cl: 05021737001 sr_cl: WERA05021737001 sr_dash: sold: 105.78 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Min. width across flats 1,5 mm With ball head Yes Quantity per set 9 Product Range Wera Hex-Plus n: WERA 950/9 Hex-Plus 7 socket wrench set metric BlackLaser 9-piece - 05021737001 cn: HEX KEY SET cn2: HEX KEY SET cn_clear: HEXKEYSET d: Product description High quality L-key set for hexagonal socket screws. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. Wear-resistant size markings and a clip fastener for rapid accessing. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer BlackLaser for high corrosion protection and long service life L-keys are quickly to hand thanks to their size markings Wear-resistant clip material for enhanced durability 9-piece set in a two-component clip Application Hexagon socket screws Design BlackLaser surface Tip Hex-Plus Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. L-keys with BlackLaser surface treatment for outstanding surface protection and long service life. High corrosion protection. The wear-resistant clip material ensures that the L-keys are securely held yet are easy to remove. ds: dsc: Scope of delivery 950/9 Hex-Plus 7 L-key set, metric, BlackLaser, 9 pieces 9x 950 BM L-key, metric, BlackLaser: 1.5x45 mm, 2x50 mm, 2.5x56 mm, 3x63 mm, 4x70 mm, 5x80 mm, 6x90 mm, 8x100 mm, 10x112 mm kts: socket wrench set metric BlackLaser 9-piece kpn: 950/9 Hex-Plus 7 kpn_dash: 950/9 Hex kpn_clear: 9509HexPlus7 bkpn: WERA 950/9 Hex-Plus 7 bkpn_clear: WERA 9509HexPlus7 c_path: Home / Tools / Hand tools / Keys / Sets / Hex key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera hex key set | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05021737001 sr_ns: WERA05021737001
r: 02834121 p: 8.06 pid: 41931 b: WERA q: 0 st: lt: 13 ean: 4013288185839 sr: WERA 05022664001 sr_no_br: 05022664001 sr_no_br_cl: 05022664001 sr_cl: WERA05022664001 sr_dash: sold: 104.78 p_range: none type: standard act: 1 avo: 1 av: Width across flats 4 mm With ball head Yes With handle No Handle type VDE approved No With safety colour code 1000V No Non-sparking No Surface treatment None Blade length 137 mm Short arm length 24 mm Overall length 137 mm n: WERA 3950 SPKL socket spanner multicolour metric stainless steel 4 x 137 mm - 05022664001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description Premium stainless steel Wera L-key for hexagonal socket screws. Stainless steel prevents transmission of extraneous rust. The Hex-Plus profile offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. With hexagonal ball tip at the long arm: The ball-shaped tip profiles enable the tool shaft to be moved and pivoted relative to the screw axis which allows screwdriving "around the corner". Take it easy tool finder with colour coding by size. Solution to the extraneous rust problem: fasten stainless screws with stainless tools Stainless L-keys prevent extraneous rust on stainless screws Hex-Plus allows socket head screws to live longer All L-keys have a colour-coded, easy-grip hose sleeve for ergonomic and comfortable operation even at low temperatures With Take it easy tool finder: colour coding by size Application Hexagon socket screws Design Stainless steel, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip Hex-Plus, ball-end hexagon on long arm Features and benefits Stainless L-keys are hardened to the same strength as conventional (carbon) steel tools, and prevent extraenous rust forming. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. L-keys with a thermoplastic sleeve are manufactured out of easy-to-grip, circular material. The sleeve ensures that work is safe and comfortable even at low temperatures. High corrosion protection features thanks to the special BlackLaser surface treatment. Colour coding and large stamp to enable the desired L-key to be easily located. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 3950 SPKL Multicolour L-key, metric, stainless, 4 x 137 mm kts: socket spanner multicolour metric stainless steel 4 x 137 mm kpn: 3950 SPKL kpn_dash: kpn_clear: 3950SPKL bkpn: WERA 3950 SPKL bkpn_clear: WERA 3950SPKL c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05022664001 sr_ns: WERA05022664001
r: 41947051 p: 17.19 pid: 72023 b: WERA q: 0 st: lt: 12 ean: 4013288111975 sr: WERA 05022171001 sr_no_br: 05022171001 sr_no_br_cl: 05022171001 sr_cl: WERA05022171001 sr_dash: sold: 103.14 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Min. width across flats 5/64 inch With ball head Yes Quantity per set 9 Product Range Wera Hex-Plus n: WERA 950/9 Hex-Plus Imperial 1 socket wrench set inch BlackLaser 9-piece - 05022171001 cn: HEX KEY SET cn2: HEX KEY SET cn_clear: HEXKEYSET d: Product description High quality L-key set for imperial hexagonal socket screws in a practical clip fastener out of wear-resistant material, enabling secure storage of the L-keys as well as simple removal. Hex-Plus profile: offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer BlackLaser for high corrosion protection and long service life L-keys are quickly to hand thanks to their size markings Wear-resistant clip material for enhanced durability 9-piece set in a two-component clip Application Hexagon socket screws Design BlackLaser surface Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. L-keys with BlackLaser surface treatment for outstanding surface protection and long service life. High corrosion protection. The wear-resistant clip material ensures that the L-keys are securely held yet are easy to remove. ds: dsc: Scope of delivery 950/9 Hex-Plus Imperial 1 L-key set, Imperial, BlackLaser, 9 pieces 9x 950 PKL L-key, Imperial, BlackLaser: 5/64"x100 mm, 3/32"x112 mm, 1/8"x126 mm, 5/32"x140 mm, 3/16"x160 mm, 7/32"x180 mm, 1/4"x190 mm, 5/16"x200 mm, 3/8"x212 mm kts: socket wrench set inch BlackLaser 9-piece kpn: 950/9 Hex-Plus Imperial 1 kpn_dash: 950/9 Hex kpn_clear: 9509HexPlusImperial1 bkpn: WERA 950/9 Hex-Plus Imperial 1 bkpn_clear: WERA 9509HexPlusImperial1 c_path: Home / Tools / Hand tools / Keys / Sets / Hex key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera hex key set | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05022171001 sr_ns: WERA05022171001
r: 02833012 p: 3.43 pid: 41560 b: WERA q: 0 st: lt: 15 ean: 4013288095039 sr: WERA 05027106001 sr_no_br: 05027106001 sr_no_br_cl: 05027106001 sr_cl: WERA05027106001 sr_dash: sold: 102.9 p_range: none type: standard act: 1 avo: 1 av: Width across flats 5 mm With ball head Yes With handle No Handle type VDE approved No With safety colour code 1000V No Non-sparking No Blade length 160 mm Short arm length 28 mm Overall length 160 mm n: WERA 950 PKL BM socket spanner metric blacklaser 5 x 160 mm - 05027106001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description High quality L-keys for hexagonal socket screws. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. L-keys for hexagonal socket screws Hexagonal socket wrench with Hex-Plus advantage for a longer screw life Hexagonal ballpoint on the long arm BlackLaser for high corrosion protection and long service life Metric Application Hexagon socket screws Design BlackLaser surface Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. L-keys with BlackLaser surface treatment for outstanding surface protection and long service life. High corrosion protection. ds: dsc: Scope of delivery 950 PKL BM L-key, metric, BlackLaser, 5 x 160 mm kts: socket spanner metric blacklaser 5 x 160 mm kpn: 950 PKL BM kpn_dash: kpn_clear: 950PKLBM bkpn: WERA 950 PKL BM bkpn_clear: WERA 950PKLBM c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05027106001 sr_ns: WERA05027106001
r: 02829016 p: 11.404 pid: 42953 b: WERA q: 0 st: lt: 10 ean: 4013288168320 sr: WERA 05671383001 sr_no_br: 05671383001 sr_no_br_cl: 05671383001 sr_cl: WERA05671383001 sr_dash: sold: 102.636 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Accessory/Part type Case Product Range Wera Joker n: WERA 9453 case 6000 for 4 Joker socket and ratchet spanners, empty, 290 x 100 mm - 05671383001 cn: ACCESSORY/PART WRENCH cn2: ACCESSORY/PART WRENCH cn_clear: ACCESSORYPARTWRENCH d: Product description Robust pouch for 4 Jokers; with rubber label. Offers space for 4 JOKER combination ratcheting wrenches Pouch for 4 Joker combination ratcheting wrenches, empty Robust bag with strong hook-and-loop fastener and hanger Features and benefits ds: dsc: Scope of delivery 9453 Pouch 6000 for 4 Joker Ratcheting combination wrenches, empty, 290 x 100 mm kts: case 6000 for 4 Joker socket and ratchet spanners, empty, 290 x 100 mm kpn: 9453 kpn_dash: kpn_clear: 9453 bkpn: WERA 9453 bkpn_clear: WERA 9453 c_path: Home / Tools / Hand tools / Keys / Accessories and spare parts / Accessory/part wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera accessories and spare parts / Wera accessory/part wrench | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05671383001 sr_ns: WERA05671383001
r: 02833229 p: 5.13 pid: 41429 b: WERA q: 0 st: lt: 8 ean: 4013288041227 sr: WERA 05022071001 sr_no_br: 05022071001 sr_no_br_cl: 05022071001 sr_cl: WERA05022071001 sr_dash: sold: 102.6 p_range: none type: standard act: 1 avo: 1 av: Width across flats 7/64" With ball head Yes With handle No Handle type VDE approved No With safety colour code 1000V No Non-sparking No Blade length 119 mm Short arm length 19 mm Overall length 119 mm n: WERA 950 PKL socket spanner blacklaser 7/64" x 119 mm - 05022071001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description High quality L-keys for imperial hexagonal socket screws. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer Hexagonal ballpoint on the long arm BlackLaser for high corrosion protection and long service life Imperial Application Hexagon socket screws Design BlackLaser surface Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. Chrome-plated hexagon L-keys for outstanding surface protection and long service life. High corrosion protection. ds: dsc: Scope of delivery 950 PKL L-key, Imperial, BlackLaser, 7/64" x 119 mm kts: socket spanner blacklaser 7/64" x 119 mm kpn: 950 PKL kpn_dash: kpn_clear: 950PKL bkpn: WERA 950 PKL bkpn_clear: WERA 950PKL c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05022071001 sr_ns: WERA05022071001
r: 03057788 p: 10.247 pid: 33757 b: WERA q: 0 st: lt: 15 ean: 4013288208415 sr: WERA 05023387001 sr_no_br: 05023387001 sr_no_br_cl: 05023387001 sr_cl: WERA05023387001 sr_dash: sold: 102.47 p_range: none type: standard act: 1 avo: 1 av: Length 230 mm Connection type (wrench) Internal hexagon With cardan joint No VDE approved No With safety colour code 1000V No Width across flats 10 mm n: WERA 495 T-handle spanner screwdriver, 10 x 230 mm - 05023387001 cn: T-HANDLE KEY cn2: T-HANDLE KEY cn_clear: THANDLEKEY d: Product description T-handle screwdriver: The ideal handle shape to allow high torque transmission in difficult tightening and loosening situations. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head. T-handle screwdriver for the transmission of particularly high tightening and loosening torque Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working With handle markings by profile and size. Special surface treatment for high corrosion protection and optimum fitting accuracy Application External hexagon screws Blade Round Design Matte chrome-plated Handle T-shape, 2 components, with hole for hanging. With handle markings by profile and size. Features and benefits The ergonomically shaped 2-component T-handle with finger recesses and pleasant surface facilitates very high power transmission and fatigue-free working. By using the blade as an extension of your lower arm you can transfer particularly high torque. Due to the special surface treatment, the blades receive a high level of corrosion protection. The optimum fitting accuracy of the screw is also guaranteed. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 495 T-handle socket wrench screwdrivers, 10 x 230 mm kts: T-handle spanner screwdriver, 10 x 230 mm kpn: 495 kpn_dash: kpn_clear: 495 bkpn: WERA 495 bkpn_clear: WERA 495 c_path: Home / Tools / Hand tools / Keys / Keys / T-handle key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera t-handle key sr_no_br_cl_ns: 05023387001 sr_ns: WERA05023387001
r: 02833745 p: 7.14 pid: 41830 b: WERA q: 0 st: lt: 14 ean: 4013288167859 sr: WERA 05022604001 sr_no_br: 05022604001 sr_no_br_cl: 05022604001 sr_cl: WERA05022604001 sr_dash: sold: 99.96 p_range: none type: standard act: 1 avo: 1 av: Width across flats 2,5 mm With ball head Yes With handle No Handle type VDE approved No With safety colour code 1000V No Non-sparking No Blade length 112 mm Short arm length 19 mm Overall length 112 mm n: WERA 950 SPKL socket spanner multicolour metric 2.5 x 112 mm - 05022604001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description Premium Wera L-key with colour-coded, convenient hose sleeve, which makes the tool easily accessible and the ergonomic and comfortable handle is easy on the hands even at low temperatures. The Hex Plus profile offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw head is almost eliminated. The ball on the long arm allows safe working even in difficult installation positions. The BlackLaser surface treatment makes for excellent surface protection, even from corrosion, and for long durability. Lasered and therefore abrasion-proof size marking on the L-key for quick access. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer Colour coded, easy-to-grip plastic sleeve, even at low temperatures Hexagonal ballpoint on the long arm Wear-resistant size marking Application Hexagon socket screws Design BlackLaser surface, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. L-keys made from circular material fit into the hand better and allow less strenuous work over a longer period. Additionally, the rubber sleeve provides a pleasant grip, particularly in applications at low temperatures. Colour coding and large stamp enable the desired L-key to be easily located. Moreover, the round material keys are more robust, particularly where smaller sizes are concerned. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 950 SPKL L-key Multicolour, metric, 2.5 x 112 mm kts: socket spanner multicolour metric 2.5 x 112 mm kpn: 950 SPKL kpn_dash: kpn_clear: 950SPKL bkpn: WERA 950 SPKL bkpn_clear: WERA 950SPKL c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05022604001 sr_ns: WERA05022604001
r: 03166689 p: 8.099 pid: 33821 b: WERA q: 1 st: 1 lt: 1 ean: 4013288212542 sr: WERA 05020201001 sr_no_br: 05020201001 sr_no_br_cl: 05020201001 sr_cl: WERA05020201001 sr_dash: sold: 97.188 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 10 mm Length 125 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (10 x 125 mm) - 05020201001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 10 x 125 mm kts: ring spanner (10 x 125 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020201001 sr_ns: WERA05020201001
r: 08085452 p: 23.801 pid: 71261 b: WERA q: 0 st: lt: 9 ean: 4013288222190 sr: WERA 05004182001 sr_no_br: 05004182001 sr_no_br_cl: 05004182001 sr_cl: WERA05004182001 sr_dash: sold: 95.204 p_range: none type: standard act: 1 avo: 1 av: Quantity per set 5 n: WERA Bicycle Set 15 tool set for bicycle repair 5-piece - 05004182001 cn: SPANNER SET cn2: SPANNER SET cn_clear: SPANNERSET d: Product description The ultra compact and lightweight bike tools with two quadruple bits and three tyre levers. Four different screw profiles can be operated with just one bit. Significant weight savings of over 50 %. The enormous space savings make the Bicycle Set 15 perfect for mobile use. The operability of the large profiles is made possible by the spring compression of the small tips. The bit with a 1/4" hexagon drive (Wera connection series 1) can also be used with e.g. bit ratchets and bitholding screwdrivers with Rapidaptor. The tyre lever 9504 has a 1/4" mounting for using a 1/4" bit. When both 9504 tyre levers are stacked together, a 4-in-1 bit can be inserted and you get a screwdriving tool. The tyre lever 9505 serves as both valve ejector and bleeder valve. The jacks and 4-in-1 bits can be clipped together, so that everything is compact and nothing will be lost. Innovative, extremely compact quadruple bit - only one bit for four different screw sizes Super space-saving solution, ideal for mobile use Compact, secure and very simple retainer in the Wera tyre jacks The hexagon mounting of the tyre jack allows a torque of up to 10 Nm Significant weight savings and better overview of the tools when on tour 5-piece setWith the glass fibre reinforced plastic tyre jacks, the tyres can be safely levered off the rim without damaging the rim.Two 9504 tyre jacks with 1/4" bit mountingOne 9505 tyre jack with valve ejector for French valves (Sclaverand) and bleeder valve for car valvesOne bit 9506 (4-in1) for hexagonal socket screws sizes 3.0; 4.0; 5.0; 6.0One bit 9507 (4-in1) for hexagonal socket screws sizes 2.5; 5.0; 6.0 and TORX® screws size TX 25 Features and benefits Innovative, extremely compact quadruple bit - only one bit for four different screw sizes With the glass fibre reinforced plastic tyre jacks, the tyres can be safely levered off the rim without damaging the rim. Lift off of the rim with one tyre jack, hook into a spoke and pull off the tyre with the second tyre jack. The two tyre jacks can be clicked together and are therefore not lost individually. The 1/4" hexagon mounting in the tyre lever 9504 can mount one 1/4" bit, allowing for easy connections. The 9505 tyre lever can be used as a valve ejector for French valves (Sclaverand) and as a bleeder for car valves. Four screw sizes can be operated with the 4-in-1 bits 9506 and 9507. The 4-in-1 bit 9506 for four sizes of hexagonal socket screws (3.0; 4.0; 5.0; 6.0), the 4-in-1 bit 9507 for three sizes of hexagonal socket screws (2.5; 5.0; 6.0) and one size of TORX® screws (TX 25). In order to use the larger profile, continuously press against the spring tension while screwdriving so that the smaller profile is countersunk and the larger profile can be used. When the tyre levers 9504 are stacked together, the 4-in-1 bits can be inserted in the 1/4" holder and you get a screwdriving tool. The 4-in-1 bit is clipped into the tyre lever 9504. The tyre lever 9505 can be attached so that the jack and bit form a compact package. ds: dsc: Scope of delivery Bicycle Set 15, 5 pieces 2x 9504 Tyre jack with bit mounting 2: 105 mm 1x 9505 Tyre jack with bit mounting 3: 105 mm 1x 9506 4-in-1 bit 1: 3; 4; 5; 6 x 37 mm 1x 9507 4-in-1 bit 2: 2.5; 5; 6 x TX 25 x 37 mm kts: tool set for bicycle repair 5-piece kpn: Bicycle Set 15 kpn_dash: kpn_clear: BicycleSet15 bkpn: WERA Bicycle Set 15 bkpn_clear: WERA BicycleSet15 c_path: Home / Tools / Hand tools / Keys / Sets / Spanner set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera spanner set sr_no_br_cl_ns: 05004182001 sr_ns: WERA05004182001
r: 03057688 p: 7.272 pid: 28966 b: WERA q: 0 st: lt: 8 ean: 4013288207920 sr: WERA 05023343001 sr_no_br: 05023343001 sr_no_br_cl: 05023343001 sr_cl: WERA05023343001 sr_dash: sold: 94.536 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Width across flats 5 mm With ball head No With handle Yes Handle type T-handle VDE approved No With safety colour code 1000V No Non-sparking No Surface treatment Chrome plated Blade length 150 mm Short arm length 20 mm Overall length 150 mm Product Range Wera Hex-Plus n: WERA 454 HF T-handle hex screwdriver Hex-Plus with holding function, 5 x 150 mm - 05023343001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description T-handle screwdriver: The ideal handle shape allows the transmission of particularly high tightening and loosening moments. The ergonomic shape of the handle fills the ball of the hand well, the fingers lie securely in the softly rounded recessed grips. The whole hand comes into contact with the handle and friction losses between hand and handle are avoided. With holding function to hold the hexagonal socket screw securely on the tool. Special surface treatment for high corrosion protection and optimal fitting accuracy in the screw. T-handle screwdriver for the transmission of particularly high tightening and loosening torque Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working With additional short arm for the transmission of extremely high torques due to the leverage of the long arm With holding function (HF) on the long arm to securely hold the screw on the tool Take it easy tool finder: colour coding according to profile and size Application Hexagon socket screws Blade Hexagon Design With long and short arm, Hex-Plus, bevelled, matte chrome-plated, with holding function for hexagon socket screws on the long arm Handle T-shape, 2 components, with hole for hanging. With Take it easy tool finder: Colour coding by profiles (blue = hexagon socket) and size stamping. Features and benefits The ergonomically shaped 2-component T-handle with finger recesses and pleasant surface facilitates very high power transmission and fatigue-free working. A spring loaded ball ensures the hexagon socket screw to be clamped on the tool tip. Especially helpful in hard to reach areas where you can not use your other hand to hold the screw. The additional short arm, which emerges laterally from the handle, allows the transmission of extremely high torques by using the long arm as a lever. By using the blade as an extension of your lower arm you can transfer particularly high torque. Due to the special surface treatment, the blades receive a high level of corrosion protection. The optimum fitting accuracy of the screw is also guaranteed. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 454 HF T-handle hexagon screwdriver Hex-Plus with holding function, 5 x 150 mm kts: T-handle hex screwdriver Hex-Plus with holding function, 5 x 150 mm kpn: 454 HF kpn_dash: kpn_clear: 454HF bkpn: WERA 454 HF bkpn_clear: WERA 454HF c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05023343001 sr_ns: WERA05023343001
r: 02833742 p: 7.86 pid: 41876 b: WERA q: 0 st: lt: 10 ean: 4013288167842 sr: WERA 05022600001 sr_no_br: 05022600001 sr_no_br_cl: 05022600001 sr_cl: WERA05022600001 sr_dash: sold: 94.32 p_range: none type: standard act: 1 avo: 1 av: Width across flats 1,5 mm With ball head Yes With handle No Handle type VDE approved No With safety colour code 1000V No Non-sparking No Blade length 90 mm Short arm length 14 mm Overall length 90 mm n: WERA 950 SPKL socket spanner multi-colour metric 1.5 x 90 mm - 05022600001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description Premium Wera L-key with colour-coded, convenient hose sleeve, which makes the tool easily accessible and the ergonomic and comfortable handle is easy on the hands even at low temperatures. The Hex Plus profile offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw head is almost eliminated. The ball on the long arm allows safe working even in difficult installation positions. The BlackLaser surface treatment makes for excellent surface protection, even from corrosion, and for long durability. Lasered and therefore abrasion-proof size marking on the L-key for quick access. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer Colour coded, easy-to-grip plastic sleeve, even at low temperatures Hexagonal ballpoint on the long arm Wear-resistant size marking Application Hexagon socket screws Design BlackLaser surface, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. L-keys made from circular material fit into the hand better and allow less strenuous work over a longer period. Additionally, the rubber sleeve provides a pleasant grip, particularly in applications at low temperatures. Colour coding and large stamp enable the desired L-key to be easily located. Moreover, the round material keys are more robust, particularly where smaller sizes are concerned. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 950 SPKL L-key Multicolour, metric, 1.5 x 90 mm kts: socket spanner multi-colour metric 1.5 x 90 mm kpn: 950 SPKL kpn_dash: kpn_clear: 950SPKL bkpn: WERA 950 SPKL bkpn_clear: WERA 950SPKL c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05022600001 sr_ns: WERA05022600001
