r: 03166862 p: 39.834 pid: 31393 b: WERA q: 1 st: 1 lt: 1 ean: 4013288212788 sr: WERA 05020262001 sr_no_br: 05020262001 sr_no_br_cl: 05020262001 sr_cl: WERA05020262001 sr_dash: sold: 358.506 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 1 24 mm Length 280 mm Non-sparking No VDE approved No With safety colour code 1000V Surface treatment Chrome plated Width across flats 2 27 mm Product Range Wera Joker n: WERA 6002 Joker Double double open-end spanner, 24 x 27 x 280 mm - 05020262001 cn: OPEN-ENDED SPANNER cn2: OPEN-ENDED SPANNER cn_clear: OPENENDEDSPANNER d: Product description High-quality, metric double spanner from Wera: Everything a wrench can do and so much more. Faster, better, more beautiful. A real Joker! The new generation of double open-ended spanners. For hexagon screw heads and bolts. With holding function by a metal plate in the open end, which reduces the risk of losing screws and sockets. With its extra hard teeth the exchangeable metal plate in the open end secures screws and sockets and reduces the risk of slipping. The integrated end stop can prevent the screw head from slipping down and allows application of high torques. The double hexagon geometry ensures a positive connection with the screw or bolt and thus reduces the risk of slipping. A return angle of only 30° avoids time-consuming rotating of the wrench whilst screwdriving. The special forge geometry allows a high torque transmission and high bending stiffness. Made of high-performance chromium molybdenum steel with nickel-chromium coating for high corrosion protection. With tool finder Take it easy: colour coding by size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping The double-hex geometry reduces the risk of slipping Return angle of only 30° With Take it easy tool finder: colour coding by size Application Hexagon bolts and nuts Design Double open-end wrench Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. When we began to think about open-ended wrenches, we asked ourselves: why does the wrench always have to be flipped over; why does it have an offset design; why does it slip off injuring fingers? The new design of the open end resulted in a real "Joker" that works even when all other trumps have been played. The Joker double open-ended wrench is ideally suited for locking down nuts and bolts. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6002 Joker Double Open end wrenches, 24 x 27 x 280 mm kts: double open-end spanner, 24 x 27 x 280 mm kpn: 6002 Joker Double kpn_dash: kpn_clear: 6002JokerDouble bkpn: WERA 6002 Joker Double bkpn_clear: WERA 6002JokerDouble c_path: Home / Tools / Hand tools / Keys / Keys / Open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera open-ended spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020262001 sr_ns: WERA05020262001
r: 02688518 p: 22.148 pid: 44632 b: WERA q: 2 st: 1 lt: 1 ean: 4013288167330 sr: WERA 05073274001 sr_no_br: 05073274001 sr_no_br_cl: 05073274001 sr_cl: WERA05073274001 sr_dash: sold: 354.368 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 14 mm Overall length 188 mm Type of drive profile Twelve-point Product Range Wera Joker n: WERA 6000 Joker socket and ring spanner, 14 x 188 mm - 05073274001 cn: RATCHET COMBINATION SPANNER cn2: RATCHET COMBINATION SPANNER cn_clear: RATCHETCOMBINATIONSPANNER d: Product description Premium metric ring ratchet spanner by Wera: Everything a wrench can do and so much more. Faster, better, more beautiful. A real Joker. The new generation of ring ratchet spanners. For hexagon screw heads and bolts. With holding function enabled by a metal plate in the mouth, which reduces the risk of losing screws and sockets. With its extra hard teeth, the exchangeable metal plate in the mouth secures screws and sockets and reduces the risk of slipping. The integrated end stop can prevent the screw head from slipping down and allows application of high torques. The double hexagon geometry ensures a positive connection with the screw or bolt and thus reduces the risk of slipping. A return angle of only 30° at the jaw end avoids time-consuming rotating of the tool whilst screwdriving. Ratchet mechanism at the ring side with exceptionally high fine toothing of 80 teeth for flexibility even in confined spaces. The specially engineered geometry allows high torque transmission and high bending stiffness. Made of high-performance chromium molybdenum steel with nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding by size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping The double-hex geometry reduces the risk of slipping Return angle of only 30° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench Features and benefits The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined working spaces. When we began to think about open-ended wrenches, we asked ourselves: why does the wrench always have to be flipped over; why does it have an offset design; why does it slip off injuring fingers? The new design of the open end resulted in a real "Joker" that works even when all other trumps have been played. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6000 Joker Ratcheting combination wrenches, 14 x 188 mm kts: socket and ring spanner, 14 x 188 mm kpn: 6000 Joker kpn_dash: kpn_clear: 6000Joker bkpn: WERA 6000 Joker bkpn_clear: WERA 6000Joker c_path: Home / Tools / Hand tools / Keys / Keys / Ratchet combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratchet combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05073274001 sr_ns: WERA05073274001
r: 03210967 p: 24.628 pid: 69529 b: WERA q: 0 st: lt: 9 ean: 4013288216892 sr: WERA 05020099001 sr_no_br: 05020099001 sr_no_br_cl: 05020099001 sr_cl: WERA05020099001 sr_dash: sold: 344.792 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 1 7 mm Length 117 mm Non-sparking No VDE approved No With safety colour code 1000V Surface treatment Chrome plated Width across flats 2 10 mm Product Range Wera Joker n: WERA 6004 Joker XS self-adjusting spanner, 7-10 x 1/4-3/8" x 117 mm - 05020099001 cn: OPEN-ENDED SPANNER cn2: OPEN-ENDED SPANNER cn_clear: OPENENDEDSPANNER d: Product description Many users wish to have a universal screwdriving tool with the widest possible range of applications. It should be a single tool for multiple metric and imperial dimensions. It should automatically adjust to the different screw sizes. It should be safe to grab without damaging anything and should allow for high working speeds. With its continuous and parallel jaws the Joker 6004 replaces several single spanner sizes. The required size is automatically and continuously set when attaching the tool to the hexagon bolt or screw. The integrated lever mechanism securely clamps the hexagon screw or bolt between the jaws, which significantly reduces the risk of slippage or damage. The ratchet feature ensures fast and consistent screwdriving without removing the tool. By using the corner-width rectangular prisms, a back-pivoting angle of only 30° can be achieved. The single-arm design, in conjunction with the ratchet feature and the corner-width prism, makes it possible to work even in confined spaces. The adjustable Joker 6004 is the universal screwdriving tool. Self-setting. Gripping. Spanning. For hexagon screw heads and bolts with wrench sizes 7.0; 8.0; 9.0; 10.0 (metric) For hexagon screw heads and bolts with wrench sizes 1/4"; 5/16"; 3/8" (imperial) Automatically and continuously gripping hexagon screws and bolts Lever mechanism upon gripping prevents slipping and damage With mechanical ratchet functionality for fast and consistent screwdriving without removing the spanner Application Hexagon screw heads and bolts with wrench size 7,0; 8,0; 9,0; 10,0 (metric) and 1/4"; 5/16"; 3/8" (imperial) Design Self-setting spanner with ratchet function; size-adjustable open end side, parallel smooth jaws, with 30° return angle due to the corner-width rectangular prisms in the jaws; hole for hanging Features and benefits With its automatically and continuously gripping parallel jaws the Joker spanner 6004 covers all dimensions in the respective field of application. The tool automatically finds the required size when placed on the bolt or screw, no setting required. The parallel smooth jaws of the Joker 6004 allow surface pressure and can thus prevent rounding of the bolt or screw head, which can occur during power transmission via the corners. The ratchet feature in the jaw ensures fast and consistent screwdriving without removing the tool. The corner-width rectangular prisms in the jaw allow a return angle of only 30°. Thanks to its hole the Joker can be neatly hung on the workshop wall. ds: dsc: Scope of delivery 6004 Joker XS Self-setting spanner, 7; 8; 9; 10 x 1/4; 5/16; 3/8"" x 117 mm kts: self-adjusting spanner, 7-10 x 1/4-3/8" x 117 mm kpn: 6004 Joker XS kpn_dash: kpn_clear: 6004JokerXS bkpn: WERA 6004 Joker XS bkpn_clear: WERA 6004JokerXS c_path: Home / Tools / Hand tools / Keys / Keys / Open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera open-ended spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020099001 sr_ns: WERA05020099001
r: 03176903 p: 20.495 pid: 31953 b: WERA q: 0 st: lt: 8 ean: 4013288218858 sr: WERA 05020503001 sr_no_br: 05020503001 sr_no_br_cl: 05020503001 sr_cl: WERA05020503001 sr_dash: sold: 327.92 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 24 mm Length 280 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (24 x 280 mm) - 05020503001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 24 x 280 mm kts: ring spanner (24 x 280 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020503001 sr_ns: WERA05020503001
r: 02829025 p: 13.884 pid: 42738 b: WERA q: 0 st: lt: 11 ean: 4013288168139 sr: WERA 05671382001 sr_no_br: 05671382001 sr_no_br_cl: 05671382001 sr_cl: WERA05671382001 sr_dash: sold: 319.332 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Accessory/Part type Case Product Range Wera Joker n: WERA 9452 case 6000 for 11 Joker socket and ratchet spanners, empty, 290 x 135 mm - 05671382001 cn: ACCESSORY/PART WRENCH cn2: ACCESSORY/PART WRENCH cn_clear: ACCESSORYPARTWRENCH d: Product description Robust pouch for 11 Jokers; with rubber label. Pouch for 11 Joker combination ratcheting wrenches, empty Robust bag with strong hook-and-loop fastener and hanger Offers space for 11 JOKER combination ratcheting wrenches Features and benefits ds: dsc: Scope of delivery 9452 Pouch 6000 for 11 Joker Ratcheting combination wrenches, 290 x 135 mm kts: case 6000 for 11 Joker socket and ratchet spanners, empty, 290 x 135 mm kpn: 9452 kpn_dash: kpn_clear: 9452 bkpn: WERA 9452 bkpn_clear: WERA 9452 c_path: Home / Tools / Hand tools / Keys / Accessories and spare parts / Accessory/part wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera accessories and spare parts / Wera accessory/part wrench | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05671382001 sr_ns: WERA05671382001
r: 02828974 p: 39.008 pid: 42581 b: WERA q: 0 st: lt: 8 ean: 4013288184764 sr: WERA 05020074001 sr_no_br: 05020074001 sr_no_br_cl: 05020074001 sr_cl: WERA05020074001 sr_dash: sold: 312.064 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 19 mm Overall length 246 mm Product Range Wera Joker n: WERA 6001 Joker Switch socket and ratchet spanner, switchable, 19 x 246 mm - 05020074001 cn: RATCHET COMBINATION SPANNER cn2: RATCHET COMBINATION SPANNER cn_clear: RATCHETCOMBINATIONSPANNER d: Product description Joker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bolt head downwards and enables higher torque to be applied. The exchangeable metal plate in the jaw securely holds nuts and bolts with its extra hard teeth and reduces the risk of slipping. The double-hex geometry delivers a very positive connection with nuts or bolts and again provides for a lower risk of any slipping. The low return angle of only 30° at the jaw end avoids any time-consuming flipping of the wrench when fastening. The reversible ratchet mechanism at the ring end with its fine toothing (80 teeth) ensures great flexibility even in confined spaces. Audibly precise ratchet mechanism. Additionally, the robust two-piece locking element provides for an extreme stability. Comes with a 15° tilted ratchet end for secure work even at high torque. The special forged geometry allows for high torque transfer and high flexural rigidity. Manufactured out of high-performance chrome-molybdenum steel with a nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding according to size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping Very fine toothing and robust locking element Ratchet end tilted by 15° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench, switch lever for convenient change of direction; ring end tilted at 15° from the handle Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. The direction of the fine-tooth ratchet mechanism can easily be changed via the smooth switch lever. The ratchet end is tilted at 15° to the tool axis, making application of the tool in confined spaces much easier. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6001 Joker Switch Ratcheting combination wrench, with switch lever, 19 x 246 mm kts: socket and ratchet spanner, switchable, 19 x 246 mm kpn: 6001 Joker Switch kpn_dash: kpn_clear: 6001JokerSwitch bkpn: WERA 6001 Joker Switch bkpn_clear: WERA 6001JokerSwitch c_path: Home / Tools / Hand tools / Keys / Keys / Ratchet combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratchet combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020074001 sr_ns: WERA05020074001
r: 03176898 p: 49.421 pid: 31940 b: WERA q: 0 st: lt: 15 ean: 4013288218896 sr: WERA 05020507001 sr_no_br: 05020507001 sr_no_br_cl: 05020507001 sr_cl: WERA05020507001 sr_dash: sold: 296.526 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 36 mm Length 460 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (36 x 460 mm) - 05020507001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 36 x 460 mm kts: ring spanner (36 x 460 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020507001 sr_ns: WERA05020507001
r: 03176909 p: 7.603 pid: 32955 b: WERA q: 0 st: lt: 9 ean: 4013288218773 sr: WERA 05020199001 sr_no_br: 05020199001 sr_no_br_cl: 05020199001 sr_cl: WERA05020199001 sr_dash: sold: 296.517 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 7 mm Length 110 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (7 x 110 mm) - 05020199001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 7 x 110 mm kts: ring spanner (7 x 110 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020199001 sr_ns: WERA05020199001
r: 02627556 p: 35.371 pid: 44561 b: WERA q: 0 st: lt: 8 ean: 4013288117281 sr: WERA 05022721001 sr_no_br: 05022721001 sr_no_br_cl: 05022721001 sr_cl: WERA05022721001 sr_dash: sold: 282.968 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Min. width across flats 3/32 inch With ball head Yes Supplied in Case Quantity per set 9 Product Range Wera Hex-Plus n: WERA 3950/9 Hex-Plus Imperial Stainless 1 spanner set inch stainless steel 9-piece - 05022721001 cn: HEX KEY SET cn2: HEX KEY SET cn_clear: HEXKEYSET d: Product description High quality L-key set out of stainless steel for imperial hexagonal socket screws by Wera. Stainless steel prevents the formation of extraneous rust. The Hex-Plus profile offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. Hexagonal ballpoint end on the long arm: the ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. Includes a practical belt pouch. Solution to the extraneous rust problem: fasten stainless screws with stainless tools Hex-Plus allows socket head screws to live longer Stainless L-keys prevent extraneous rust on stainless screws L-keys are quickly to hand thanks to their size markings In a robust belt pouch 9-piece set in belt pouch Application Hexagon socket screws Design Stainless steel Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. Stainless L-keys are hardened to the same strength as conventional (carbon) steel tools, and prevent extraenous rust forming. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. ds: dsc: Scope of delivery 3950/9 Hex-Plus Imperial Stainless 1 L-key set, Imperial, stainless, 9 pieces 9x 3950 PKL L-key, Imperial, stainless: 3/32"x112 mm, 7/64"x119 mm, 1/8"x123 mm, 9/64"x130 mm, 5/32"x137 mm, 3/16"x154 mm, 1/4"x185 mm, 5/16"x195 mm, 3/8"x224 mm kts: spanner set inch stainless steel 9-piece kpn: 3950/9 Hex-Plus Imperial Stainless 1 kpn_dash: 3950/9 Hex kpn_clear: 39509HexPlusImperialStainless1 bkpn: WERA 3950/9 Hex-Plus Imperial Stainless 1 bkpn_clear: WERA 39509HexPlusImperialStainless1 c_path: Home / Tools / Hand tools / Keys / Sets / Hex key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera hex key set | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05022721001 sr_ns: WERA05022721001
r: 03228372 p: 46.446 pid: 70347 b: WERA q: 0 st: lt: 15 ean: 4013288220653 sr: WERA 05004178001 sr_no_br: 05004178001 sr_no_br_cl: 05004178001 sr_cl: WERA05004178001 sr_dash: sold: 278.676 p_range: none type: standard act: 1 avo: 1 av: Min. width across flats 8 mm Max. width across flats 15 mm Supplied in Case Quantity per set 5 n: WERA Bicycle Set 10 ring spanner set 5-piece - 05004178001 cn: COMBINATION SPANNER SET cn2: COMBINATION SPANNER SET cn_clear: COMBINATIONSPANNERSET d: Product description 5-piece Joker 6003 spanner set; size 15 in an extra-slim design. As the working space is very narrow when working on your bike, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. The Joker pouches are suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system thanks to the hook and loop fastener system on the back. Particularly suitable for narrow screwdriving situations on the bike Joker 6003 pedal size 15 with flat open end to mount and dismount pedals Joker 6003 size 9 for use in switchgears (bicycle gearshift) The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Combination wrench set, open end side offset by 7.5°5-piece setIn robust pouch Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. The extra thin pedal wrench (6003 Joker 15 Pedal) is ideal for narrow installation spaces Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The Joker pouches are suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system thanks to the hook and loop fastener system on the back. ds: dsc: Scope of delivery Bicycle Set 10, 5 pieces 4x 6003 Joker Combination wrench: 8x115 mm, 9x120 mm, 10x125 mm, 13x160 mm 1x 6003 Joker Pedal Combination wrench: 15 x 174 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: ring spanner set 5-piece kpn: Bicycle Set 10 kpn_dash: kpn_clear: BicycleSet10 bkpn: WERA Bicycle Set 10 bkpn_clear: WERA BicycleSet10 c_path: Home / Tools / Hand tools / Keys / Sets / Combination spanner set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera combination spanner set sr_no_br_cl_ns: 05004178001 sr_ns: WERA05004178001
r: 03176904 p: 19.669 pid: 32950 b: WERA q: 0 st: lt: 11 ean: 4013288218841 sr: WERA 05020502001 sr_no_br: 05020502001 sr_no_br_cl: 05020502001 sr_cl: WERA05020502001 sr_dash: sold: 275.366 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 22 mm Length 260 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (22 x 260 mm) - 05020502001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 22 x 260 mm kts: ring spanner (22 x 260 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020502001 sr_ns: WERA05020502001
r: 03057771 p: 10.082 pid: 28646 b: WERA q: 0 st: lt: 8 ean: 4013288208347 sr: WERA 05023380001 sr_no_br: 05023380001 sr_no_br_cl: 05023380001 sr_cl: WERA05023380001 sr_dash: sold: 272.214 p_range: none type: standard act: 1 avo: 1 av: Drive size T45 With handle Yes Handle type T-handle Blade length (mm) 200 mm Blade length short (mm) 20 mm Overall length 249 mm Width 99 mm Drive (pin key) Torx n: WERA 467 TORX HF T-handle screwdriver with holding function, TX 45 x 200 mm - 05023380001 cn: PIN KEY cn2: PIN KEY cn_clear: PINKEY d: Product description T-handle screwdrivers: The ideal handle shape allows the transmission of particularly high tightening and loosening moments. The ergonomic shape of the handle fills the ball of the hand well, the fingers lie securely in the softly rounded recessed grips. The whole hand comes into contact with the handle and friction losses between hand and handle are avoided. With holding function to hold the TORX® screw securely on the tool. Special surface treatment for high corrosion protection and optimal fitting accuracy in the screw. T-handle screwdriver for the transmission of particularly high tightening and loosening torque Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working Take it easy tool finder: colour coding according to profile and size With additional short arm for the transmission of extremely high torques due to the leverage of the long arm With holding function (HF) on the long arm to securely hold the screw on the tool Application Socket TORX® screws Blade Round Design With long and short arm, with holding function for TORX® screws as per specification "Acument Intellectual Properties" on the long arm; matte chrome-plated Handle T-shape, 2 components, with hole for hanging. With Take it easy tool finder: Colour coding by profiles (green = TORX®) and size stamping. Features and benefits The ergonomically shaped 2-component T-handle with finger recesses and pleasant surface facilitates very high power transmission and fatigue-free working. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! The additional short arm, which emerges laterally from the handle, allows the transmission of extremely high torques by using the long arm as a lever. By using the blade as an extension of your lower arm you can transfer particularly high torque. Due to the special surface treatment, the blades receive a high level of corrosion protection. The optimum fitting accuracy of the screw is also guaranteed. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 467 TORX® HF T-handle screwdriver with holding function, TX 45 x 200 mm kts: T-handle screwdriver with holding function, TX 45 x 200 mm kpn: 467 TORX HF kpn_dash: kpn_clear: 467TORXHF bkpn: WERA 467 TORX HF bkpn_clear: WERA 467TORXHF c_path: Home / Tools / Hand tools / Keys / Keys / Pin key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera pin key sr_no_br_cl_ns: 05023380001 sr_ns: WERA05023380001
r: 02781675 p: 24.628 pid: 44821 b: WERA q: 0 st: lt: 15 ean: 4013288183750 sr: WERA 05022534001 sr_no_br: 05022534001 sr_no_br_cl: 05022534001 sr_cl: WERA05022534001 sr_dash: sold: 270.908 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Min. width across flats 1,5 mm With ball head Yes Quantity per set 7 Product Range Wera Hex-Plus n: WERA 950/7 Hex-Plus Multicolour Magnet 1 socket wrench set metric BlackLaser 7-piece - 05022534001 cn: HEX KEY SET cn2: HEX KEY SET cn_clear: HEXKEYSET d: Product description L-keys with plastic sleeve (SPKL) made of circular, easy-grip material. The sleeve makes working comfortable even at low temperatures and is easy on the fingers. All L-keys are easily accessible due to their colour coding and size markings. The wear-free material of the clip guarantees easy removal and a secure hold of the L-keys. For hexagonal socket screws. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer L-keys are quickly to hand thanks to their size markings Wear-resistant size marking Wear-resistant clip material for enhanced durability 7-piece set in a two-component clip. For recessed screws, it's often advantageous for the screw to be held on the L-key by magnetic force. The Wera clips with magnetiser/demagnetiser enable a magnetisation/demagnetisation of L-keys in a flash. Application Hexagon socket screws Design BlackLaser surface, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. For recessed screws, it's often advantageous for the screw to be held on the L-key by magnetic force. The Wera clips with magnetiser/demagnetiser enable a magnetisation/demagnetisation of L-keys in a flash. The wear-resistant clip material ensures that the L-keys are securely held yet are easy to remove. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 950/7 Hex-Plus Multicolour Magnet 1 L-key set, metric, BlackLaser, 7 pieces 7x 950 SPKL L-key Multicolour, metric: 1.5x90 mm, 2x101 mm, 2.5x112 mm, 3x123 mm, 4x137 mm, 5x154 mm, 6x172 mm kts: socket wrench set metric BlackLaser 7-piece kpn: 950/7 Hex-Plus Multicolour Magnet 1 kpn_dash: 950/7 Hex kpn_clear: 9507HexPlusMulticolourMagnet1 bkpn: WERA 950/7 Hex-Plus Multicolour Magnet 1 bkpn_clear: WERA 9507HexPlusMulticolourMagnet1 c_path: Home / Tools / Hand tools / Keys / Sets / Hex key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera hex key set | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05022534001 sr_ns: WERA05022534001
r: 08103833 p: 88.76 pid: 72289 b: WERA q: 0 st: lt: 8 ean: 4013288229847 sr: WERA 05020015001 sr_no_br: 05020015001 sr_no_br_cl: 05020015001 sr_cl: WERA05020015001 sr_dash: sold: 266.28 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Smallest size 8 mm Largest size 19 mm Supplied in On rack Quantity per set 6 Product Range Wera Joker n: WERA 9631 magneetstrip 6000 Joker 2 socket-ring spanner set 6-piece - 05020015001 cn: RATCHETING COMBINATION SPANNER SET cn2: RATCHETING COMBINATION SPANNER SET cn_clear: RATCHETINGCOMBINATIONSPANNERSET d: Product description Ring ratchet spanner set, 5-piece set, metric sizes; on a magnetic rail. The Joker 6000 ring ratchet spanner with holding function for hexagon screw heads and bolts. With its extra hard teeth, the exchangeable metal plate in the open end secures screws and sockets. The integrated end stop can prevent the screw head from slipping down and allows application of high torques. The double hexagon geometry ensures a positive connection with the screw or bolt and thus reduces the risk of slipping. A return angle of only 30° at the open end avoids time-consuming rotating of the wrench whilst screwdriving. Ratchet mechanism at the ring side with exceptionally high fine toothing of 80 teeth for flexibility even in confined spaces. The specially engineered geometry allows high torque transmission and high bending stiffness. Made of high-performance chromium molybdenum steel with nickel-chromium coating for high corrosion protection. With Take it easy Tool finder: Colour coding by size. The clips hold the tools perfectly. With its strong magnet, the rail holds securely to metal surfaces. It can also be bolted to the wall. 5-piece set With its strong magnet, the rail holds securely to metal surfaces. It can also be bolted to the wall. The clips hold the tools perfectly Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping Set of ratcheting combination wrenches, metric sizes5-piece setOn a magnetic rail Features and benefits The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined working spaces. The high-quality aluminium magnetic rail offers space for up to 11 spanners. The clamping springs hold the tools securely. With its strong magnet, the rail can be attached securely to metal surfaces. The rail can also be bolted to the wall. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. ds: dsc: Scope of delivery 9631 Magnetic rail 6000 Joker 2 Ratcheting combination wrenches set, 5 pieces 5x 6000 Joker Ratcheting combination wrenches: 8x144 mm, 10x159 mm, 13x177 mm, 17x224 mm, 19x246 mm 1x 9610 Joker Magnetic rail, for up to 11 spanners, empty: 30 x 370 mm kts: socket-ring spanner set 6-piece kpn: 9631 magneetstrip 6000 Joker 2 kpn_dash: kpn_clear: 9631magneetstrip6000Joker2 bkpn: WERA 9631 magneetstrip 6000 Joker 2 bkpn_clear: WERA 9631magneetstrip6000Joker2 c_path: Home / Tools / Hand tools / Keys / Sets / Ratchet combination spanner set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera ratchet combination spanner set | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020015001 sr_ns: WERA05020015001
r: 02688314 p: 29.586 pid: 43714 b: WERA q: 3 st: 1 lt: 1 ean: 4013288167408 sr: WERA 05073278001 sr_no_br: 05073278001 sr_no_br_cl: 05073278001 sr_cl: WERA05073278001 sr_dash: sold: 266.274 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 18 mm Overall length 235 mm Type of drive profile Twelve-point Product Range Wera Joker n: WERA 6000 Joker socket and ring spanner, 18 x 235 mm - 05073278001 cn: RATCHET COMBINATION SPANNER cn2: RATCHET COMBINATION SPANNER cn_clear: RATCHETCOMBINATIONSPANNER d: Product description Premium metric ring ratchet spanner by Wera: Everything a wrench can do and so much more. Faster, better, more beautiful. A real Joker. The new generation of ring ratchet spanners. For hexagon screw heads and bolts. With holding function enabled by a metal plate in the mouth, which reduces the risk of losing screws and sockets. With its extra hard teeth, the exchangeable metal plate in the mouth secures screws and sockets and reduces the risk of slipping. The integrated end stop can prevent the screw head from slipping down and allows application of high torques. The double hexagon geometry ensures a positive connection with the screw or bolt and thus reduces the risk of slipping. A return angle of only 30° at the jaw end avoids time-consuming rotating of the tool whilst screwdriving. Ratchet mechanism at the ring side with exceptionally high fine toothing of 80 teeth for flexibility even in confined spaces. The specially engineered geometry allows high torque transmission and high bending stiffness. Made of high-performance chromium molybdenum steel with nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding by size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping The double-hex geometry reduces the risk of slipping Return angle of only 30° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench Features and benefits The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined working spaces. When we began to think about open-ended wrenches, we asked ourselves: why does the wrench always have to be flipped over; why does it have an offset design; why does it slip off injuring fingers? The new design of the open end resulted in a real "Joker" that works even when all other trumps have been played. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6000 Joker Ratcheting combination wrenches, 18 x 235 mm kts: socket and ring spanner, 18 x 235 mm kpn: 6000 Joker kpn_dash: kpn_clear: 6000Joker bkpn: WERA 6000 Joker bkpn_clear: WERA 6000Joker c_path: Home / Tools / Hand tools / Keys / Keys / Ratchet combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratchet combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05073278001 sr_ns: WERA05073278001
r: 02832886 p: 16.859 pid: 41822 b: WERA q: 0 st: lt: 12 ean: 4013288111937 sr: WERA 05021909001 sr_no_br: 05021909001 sr_no_br_cl: 05021909001 sr_cl: WERA05021909001 sr_dash: sold: 252.885 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Min. width across flats 1,5 mm With ball head Yes Quantity per set 9 Product Range Wera Hex-Plus n: WERA 950/9 Hex-Plus 2 socket wrench set metric chrome plated 9-piece - 05021909001 cn: HEX KEY SET cn2: HEX KEY SET cn_clear: HEXKEYSET d: Product description High quality L-key set for hexagonal socket screws. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The precise chrome-plated design ensures high corrosion protection; with extra-long arm. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer High corrosion protection thanks to chrome-plating L-keys are quickly to hand thanks to their size markings Wear-resistant clip material for enhanced durability 9-piece set in a two-component clip Application Hexagon socket screws Design Chrome-plated Tip Hex-Plus Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. Chrome-plated hexagon L-keys for outstanding surface protection and long service life. High corrosion protection. The wear-resistant clip material ensures that the L-keys are securely held yet are easy to remove. ds: dsc: Scope of delivery 950/9 Hex-Plus 2 L-key set, metric, chrome-plated, 9 pieces 9x 950 L L-key, metric, chrome-plated: 1.5x90 mm, 2x100 mm, 2.5x112 mm, 3x126 mm, 4x140 mm, 5x160 mm, 6x180 mm, 8x200 mm, 10x219 mm kts: socket wrench set metric chrome plated 9-piece kpn: 950/9 Hex-Plus 2 kpn_dash: 950/9 Hex kpn_clear: 9509HexPlus2 bkpn: WERA 950/9 Hex-Plus 2 bkpn_clear: WERA 9509HexPlus2 c_path: Home / Tools / Hand tools / Keys / Sets / Hex key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera hex key set | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05021909001 sr_ns: WERA05021909001
r: 41071278 p: 22.975 pid: 71244 b: WERA q: 0 st: lt: 10 ean: 4013288104953 sr: WERA 05024244001 sr_no_br: 05024244001 sr_no_br_cl: 05024244001 sr_cl: WERA05024244001 sr_dash: sold: 252.725 p_range: none type: standard act: 1 avo: 1 av: Min. head size 8 Max. head size 40 Type of drive profile Torx Supplied in Clip Quantity per set 9 Material Stainless steel n: WERA 967/9 TX HF 1 socket wrench set with holding function BlackLaser 9-piece - 05024244001 cn: PIN KEY SET cn2: PIN KEY SET cn_clear: PINKEYSET d: Product description High quality L-key set for recessed TORX® screws. The holding function on the long arm keeps screws securely on the tool. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. Come in a practical clip fastener out of wear-resistant material, enabling secure storage of the L-keys as well as simple removal. L-keys for recessed TORX® screws With holding function (HF) on the long arm to securely hold the screw on the tool BlackLaser for high corrosion protection and long service life L-keys are quickly to hand thanks to their size markings Wear-resistant clip material for enhanced durability 9-piece set in a two-component clip Application TORX® socket screws Design Round Tip TORX® on short arm, holding function for TORX® screws made according to Acument Intellectual Properties specifications on long arm, BlackLaser surface Features and benefits In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. L-keys with BlackLaser surface treatment for outstanding surface protection and long service life. High corrosion protection. The wear-resistant clip material ensures that the L-keys are securely held yet are easy to remove. ds: dsc: Scope of delivery 967/9 TX HF 1 L-key set with holding function, BlackLaser, 9 pieces 9x 967 L TORX® HF L-key with holding function, BlackLaser: TX 8x76 mm, TX 9x79 mm, TX 10x85 mm, TX 15x90 mm, TX 20x96 mm, TX 25x104 mm, TX 27x112 mm, TX 30x122 mm, TX 40x132 mm kts: socket wrench set with holding function BlackLaser 9-piece kpn: 967/9 TX HF 1 kpn_dash: kpn_clear: 9679TXHF1 bkpn: WERA 967/9 TX HF 1 bkpn_clear: WERA 9679TXHF1 c_path: Home / Tools / Hand tools / Keys / Sets / Pin key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera pin key set sr_no_br_cl_ns: 05024244001 sr_ns: WERA05024244001
r: 02953140 p: 31.239 pid: 31162 b: WERA q: 0 st: lt: 11 ean: 4013288207227 sr: WERA 05022130001 sr_no_br: 05022130001 sr_no_br_cl: 05022130001 sr_cl: WERA05022130001 sr_dash: sold: 249.912 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Min. width across flats 1,5 mm Max. width across flats 10 mm With ball head Yes Quantity per set 9 Product Range Wera Hex-Plus n: WERA 950/9 L Hex-Plus HF 1 socket wrench set metric chrome plated with holding function 9-piece - 05022130001 cn: HEX KEY SET cn2: HEX KEY SET cn_clear: HEXKEYSET d: Product description Set of high-quality L-keys for hexagon socket screws with high corrosion protection and extra long lever for high power transmission and working in low positions. The Hex-Plus profile offers larger contact surfaces at the screw head. The notch effect is thereby reduced to a minimum, the destruction of the screw head almost eliminated. Tools from size 3 onwards offer a holding function through a pressed resilient ball. The holding function on the long arm keeps screws securely on the tool Hex-Plus allows socket head screws to live longer Extra-long arm High corrosion protection thanks to chrome-plating Wear-resistant clip material for enhanced durability 9-piece set in a two-component clip Application Hexagon socket screws Design Chrome-plated Tip Hex-Plus, holding function for hexagon socket screws on long arm, sizes: 1,5, 2,0 and 2,5 without holding function Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. The clamping of the screw is achieved by a flexible locking ball. The holding function is especially helpful in confined, hard-to-reach spaces, where there is no room for a second hand to secure the screw on the tool. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! All L-keys are easily accessible due to their size markings. Chrome-plated hexagon L-keys for outstanding surface protection and long service life. High corrosion protection. The wear-resistant clip material ensures that the L-keys are securely held yet are easy to remove. ds: dsc: Scope of delivery 950/9 L Hex-Plus HF 1 L-key set, metric, chrome-plated, with holding function, 9 pieces 6x 950 L HF L-key, metric, chrome-plated, with holding function: 10x219 mm, 8x200 mm, 6x180 mm, 5x160 mm, 4x140 mm, 3x126 mm 3x 950 L L-key, metric, chrome-plated: 2.5x112 mm, 2x100 mm, 1.5x90 mm kts: socket wrench set metric chrome plated with holding function 9-piece kpn: 950/9 L Hex-Plus HF 1 kpn_dash: 950/9 L Hex kpn_clear: 9509LHexPlusHF1 bkpn: WERA 950/9 L Hex-Plus HF 1 bkpn_clear: WERA 9509LHexPlusHF1 c_path: Home / Tools / Hand tools / Keys / Sets / Hex key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera hex key set | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05022130001 sr_ns: WERA05022130001
r: 02828862 p: 119.669 pid: 42535 b: WERA q: 0 st: lt: 12 ean: 4013288184146 sr: WERA 05020092001 sr_no_br: 05020092001 sr_no_br_cl: 05020092001 sr_cl: WERA05020092001 sr_dash: sold: 239.338 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Type of drive profile Hexagonal Smallest size 7/16 inch Largest size 3/4 inch Quantity per set 4 Product Range Wera Joker n: WERA 6001 Joker Switch 4 Imperial Set 1 socket and ratchet spanner set, Inch, 4-piece - 05020092001 cn: RATCHETING COMBINATION SPANNER SET cn2: RATCHETING COMBINATION SPANNER SET cn_clear: RATCHETINGCOMBINATIONSPANNERSET d: Product description High quality set of ratcheting combination wrenches by Wera: Joker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bolt head downwards and enables higher torque to be applied. The exchangeable metal plate in the jaw securely holds nuts and bolts with its extra hard teeth and reduces the risk of slipping. The double-hex geometry delivers a very positive connection with nuts or bolts and again provides for a lower risk of any slipping. The low return angle of only 30° at the jaw end avoids any time-consuming flipping of the wrench when fastening. The reversible ratchet mechanism at the ring end with its fine toothing (80 teeth) ensures great flexibility even in confined spaces. Audibly precise ratchet mechanism. Additionally, the robust two-piece locking element provides for an extreme stability. Comes with a 15° tilted ratchet end for secure work even at high torque. The special forged geometry allows for high torque transfer and high flexural rigidity. Manufactured out of high-performance chrome-molybdenum steel with a nickel-chromium coating for high corrosion protection. With Take it easy Tool Finder: colour coding according to size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping Very fine toothing and robust locking element Ratchet end tilted by 15° With Take it easy tool finder: colour coding by size Set of ratcheting combination wrenches, reversible4-piece setDurable pouch Features and benefits The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined working spaces. The direction of the fine-tooth ratchet mechanism can easily be changed via the smooth switch lever. The ratchet end is tilted at 15° to the tool axis, making application of the tool in confined spaces much easier. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6001 Joker Switch 4 Imperial Set 1 Ratcheting combination wrenches set, Imperial, 4 pieces 4x 6001 Joker Switch Ratcheting combination wrench, with switch lever, Imperial: 7/16"x165 mm, 1/2"x171 mm, 9/16"x187 mm, 3/4"x246 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: socket and ratchet spanner set, Inch, 4-piece kpn: 6001 Joker Switch 4 Imperial Set 1 kpn_dash: kpn_clear: 6001JokerSwitch4ImperialSet1 bkpn: WERA 6001 Joker Switch 4 Imperial Set 1 bkpn_clear: WERA 6001JokerSwitch4ImperialSet1 c_path: Home / Tools / Hand tools / Keys / Sets / Ratchet combination spanner set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera ratchet combination spanner set | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020092001 sr_ns: WERA05020092001
r: 03228368 p: 39.834 pid: 70342 b: WERA q: 0 st: lt: 12 ean: 4013288212764 sr: WERA 05020260001 sr_no_br: 05020260001 sr_no_br_cl: 05020260001 sr_cl: WERA05020260001 sr_dash: sold: 239.004 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 1 20 mm Length 260,5 mm Non-sparking No VDE approved No With safety colour code 1000V Surface treatment Chrome plated Width across flats 2 22 mm Product Range Wera Joker n: WERA 6002 Joker Double double open-end spanner, 20 x 22 x 260.5 mm - 05020260001 cn: OPEN-ENDED SPANNER cn2: OPEN-ENDED SPANNER cn_clear: OPENENDEDSPANNER d: Product description High-quality, metric double spanner from Wera: Everything a wrench can do and so much more. Faster, better, more beautiful. A real Joker! The new generation of double open-ended spanners. For hexagon screw heads and bolts. With holding function by a metal plate in the open end, which reduces the risk of losing screws and sockets. With its extra hard teeth the exchangeable metal plate in the open end secures screws and sockets and reduces the risk of slipping. The integrated end stop can prevent the screw head from slipping down and allows application of high torques. The double hexagon geometry ensures a positive connection with the screw or bolt and thus reduces the risk of slipping. A return angle of only 30° avoids time-consuming rotating of the wrench whilst screwdriving. The special forge geometry allows a high torque transmission and high bending stiffness. Made of high-performance chromium molybdenum steel with nickel-chromium coating for high corrosion protection. With tool finder Take it easy: colour coding by size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping The double-hex geometry reduces the risk of slipping Return angle of only 30° With Take it easy tool finder: colour coding by size Application Hexagon bolts and nuts Design Double open-end wrench Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. When we began to think about open-ended wrenches, we asked ourselves: why does the wrench always have to be flipped over; why does it have an offset design; why does it slip off injuring fingers? The new design of the open end resulted in a real "Joker" that works even when all other trumps have been played. The Joker double open-ended wrench is ideally suited for locking down nuts and bolts. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6002 Joker Double Open end wrenches, 20 x 22 x 260.5 mm kts: double open-end spanner, 20 x 22 x 260.5 mm kpn: 6002 Joker Double kpn_dash: kpn_clear: 6002JokerDouble bkpn: WERA 6002 Joker Double bkpn_clear: WERA 6002JokerDouble c_path: Home / Tools / Hand tools / Keys / Keys / Open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera open-ended spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020260001 sr_ns: WERA05020260001
