r: 03176920 p: 8.099 pid: 32971 b: WERA q: 0 st: lt: 15 ean: 4013288212986 sr: WERA 05020212001 sr_no_br: 05020212001 sr_no_br_cl: 05020212001 sr_cl: WERA05020212001 sr_dash: sold: 8.099 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 3/8" Length 125 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker Imperial ring spanner inch (3/8" x 125 mm) - 05020212001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, Imperial, 3/8" x 125 mm kts: ring spanner inch (3/8" x 125 mm) kpn: 6003 Joker Imperial kpn_dash: kpn_clear: 6003JokerImperial bkpn: WERA 6003 Joker Imperial bkpn_clear: WERA 6003JokerImperial c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020212001 sr_ns: WERA05020212001
r: 02833956 p: 8.06 pid: 41912 b: WERA q: 0 st: lt: 12 ean: 4013288111265 sr: WERA 05022700001 sr_no_br: 05022700001 sr_no_br_cl: 05022700001 sr_cl: WERA05022700001 sr_dash: sold: 8.06 p_range: none type: standard act: 1 avo: 1 av: Width across flats 1,5 mm Non-sparking No Overall length 90 mm Blade length 90 mm Surface treatment None Short arm length 14 mm With safety colour code 1000V No VDE approved No Handle type With handle No With ball head Yes n: WERA 3950 PKL socket spanner metric stainless steel 1.5 x 90 mm - 05022700001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description High quality L-keys out of stainless steel for hexagonal socket screws by Wera. Stainless steel prevents the formation of extraneous rust. The Hex-Plus profile offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. Hexagonal ballpoint end on the long arm: the ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer Stainless L-keys prevent extraneous rust on stainless screws Hexagonal ballpoint on the long arm Metric Application Hexagon socket screws Design Stainless steel Tip Hex-Plus, ball-end hexagon on long arm Features and benefits Stainless L-keys are hardened to the same strength as conventional (carbon) steel tools, and prevent extraenous rust forming. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. ds: dsc: Scope of delivery 3950 PKL L-key, metric, stainless, 1.5 x 90 mm kts: socket spanner metric stainless steel 1.5 x 90 mm kpn: 3950 PKL kpn_dash: kpn_clear: 3950PKL bkpn: WERA 3950 PKL bkpn_clear: WERA 3950PKL c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05022700001 sr_ns: WERA05022700001
r: 02833962 p: 7.933 pid: 41557 b: WERA q: 0 st: lt: 12 ean: 4013288111340 sr: WERA 05022708001 sr_no_br: 05022708001 sr_no_br_cl: 05022708001 sr_cl: WERA05022708001 sr_dash: sold: 7.933 p_range: none type: standard act: 1 avo: 1 av: Width across flats 8 mm Non-sparking No Overall length 195 mm Blade length 195 mm Surface treatment None Short arm length 37 mm With safety colour code 1000V No VDE approved No Handle type With handle No With ball head Yes n: WERA 3950 PKL socket spanner metric stainless steel 8 x 195 mm - 05022708001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description High quality L-keys out of stainless steel for hexagonal socket screws by Wera. Stainless steel prevents the formation of extraneous rust. The Hex-Plus profile offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. Hexagonal ballpoint end on the long arm: the ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer Stainless L-keys prevent extraneous rust on stainless screws Hexagonal ballpoint on the long arm Metric Application Hexagon socket screws Design Stainless steel Tip Hex-Plus, ball-end hexagon on long arm Features and benefits Stainless L-keys are hardened to the same strength as conventional (carbon) steel tools, and prevent extraenous rust forming. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. ds: dsc: Scope of delivery 3950 PKL L-key, metric, stainless, 8 x 195 mm kts: socket spanner metric stainless steel 8 x 195 mm kpn: 3950 PKL kpn_dash: kpn_clear: 3950PKL bkpn: WERA 3950 PKL bkpn_clear: WERA 3950PKL c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05022708001 sr_ns: WERA05022708001
r: 02832933 p: 7.85 pid: 41833 b: WERA q: 0 st: lt: 12 ean: 4013288037718 sr: WERA 05022063001 sr_no_br: 05022063001 sr_no_br_cl: 05022063001 sr_cl: WERA05022063001 sr_dash: sold: 7.85 p_range: none type: standard act: 1 avo: 1 av: Width across flats 7 mm Non-sparking No Overall length 190 mm Blade length 190 mm Surface treatment Chrome plated Short arm length 34 mm With safety colour code 1000V No VDE approved No Handle type With handle No With ball head Yes n: WERA 950 PKL socket spanner metric chrome plated 7 x 190 mm - 05022063001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description High quality L-keys for hexagonal socket screws. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The precise chrome-plated design ensures high corrosion protection. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer Hexagonal ballpoint on the long arm High corrosion protection thanks to chrome-plating Metric Application Hexagon socket screws Design Chrome-plated Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. Chrome-plated hexagon L-keys for outstanding surface protection and long service life. High corrosion protection. ds: dsc: Scope of delivery 950 PKL L-key, metric, chrome-plated, 7 x 190 mm kts: socket spanner metric chrome plated 7 x 190 mm kpn: 950 PKL kpn_dash: kpn_clear: 950PKL bkpn: WERA 950 PKL bkpn_clear: WERA 950PKL c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05022063001 sr_ns: WERA05022063001
r: 02832812 p: 7.603 pid: 43460 b: WERA q: 0 st: lt: 12 ean: 4013288018410 sr: WERA 05021080001 sr_no_br: 05021080001 sr_no_br_cl: 05021080001 sr_cl: WERA05021080001 sr_dash: sold: 7.603 p_range: none type: standard act: 1 avo: 1 av: Width across flats 13 mm Non-sparking No Overall length 132 mm Blade length 132 mm Surface treatment Chrome plated Short arm length 50 mm With safety colour code 1000V No VDE approved No Handle type With handle No With ball head No n: WERA 950 socket spanner metric chrome plated 13 x 132 mm - 05021080001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description Premium L-key for hexagonal socket screws. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw head is almost eliminated. The thoroughly chrome-plated design guarantees high corrosion protection. L-keys for hexagonal socket screws Wear-resistant size marking Hexagonal socket wrench with Hex-Plus advantage for a longer screw life High corrosion protection thanks to chrome-plating Metric Application Hexagon socket screws Design Chrome-plated Tip Hex-Plus Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. Chrome-plated hexagon L-keys for outstanding surface protection and long service life. High corrosion protection. ds: dsc: Scope of delivery 950 L-key, metric, chrome-plated, 13 x 132 mm kts: socket spanner metric chrome plated 13 x 132 mm kpn: 950 kpn_dash: kpn_clear: 950 bkpn: WERA 950 bkpn_clear: WERA 950 c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05021080001 sr_ns: WERA05021080001
r: 03176914 p: 7.603 pid: 31417 b: WERA q: 0 st: lt: 15 ean: 4013288219046 sr: WERA 05020220001 sr_no_br: 05020220001 sr_no_br_cl: 05020220001 sr_cl: WERA05020220001 sr_dash: sold: 7.603 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 1/4" Length 105 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker Imperial ring spanner inch (1/4" x 105 mm) - 05020220001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, Imperial, 1/4" x 105 mm kts: ring spanner inch (1/4" x 105 mm) kpn: 6003 Joker Imperial kpn_dash: kpn_clear: 6003JokerImperial bkpn: WERA 6003 Joker Imperial bkpn_clear: WERA 6003JokerImperial c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020220001 sr_ns: WERA05020220001
r: 08103695 p: 7.272 pid: 70327 b: WERA q: 1 st: 1 lt: 1 ean: 4013288224873 sr: WERA 05020310001 sr_no_br: 05020310001 sr_no_br_cl: 05020310001 sr_cl: WERA05020310001 sr_dash: sold: 7.272 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 1 6 mm Length 111,8 mm Non-sparking No VDE approved No With safety colour code 1000V Width across flats 2 7 mm Product Range Wera Joker n: WERA 6005 Joker double open-end spanner 6 x 7 x 111.8 mm - 05020310001 cn: OPEN-ENDED SPANNER cn2: OPEN-ENDED SPANNER cn_clear: OPENENDEDSPANNER d: Product description As installation spaces become increasingly confined, it is necessary that tools enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified to increase the placement possibilities of the tool? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6005 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6005 will automatically find the respective placement point after every turn. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With Take it easy tool finder: Colour coding by size. Double open-ended wrench Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° With Take it easy tool finder: colour coding by size Application Hexagon bolts and nuts Design Double open end wrench; open-end sides offset by 7.5°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6005 double open end wrench with its special open end design - a 7.5° offset open end and double hexagon geometry - doubles the placement points at a repeated 180° rotation of the wrench around the longitudinal axis. Bolts and screw heads can be engaged every 15°. The Joker 6005 will automatically find the respective placement point after every turn. The double hexagonal geometry of the open end of the Joker 6005 double open end wrench ensures the positive connection with the screw head or the bolt and reduces the risk of slipping. Thanks to the 7.5° offset open end, the double hexagon geometry and an improved application method (placement - screwdriving - rotation - re-placement - screwdriving - rotation etc), even screwdriving situations that have a return angle of less than 30° can be solved. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6005 Joker Double open end wrench, 6 x 7 x 111.8 mm kts: double open-end spanner 6 x 7 x 111.8 mm kpn: 6005 Joker kpn_dash: kpn_clear: 6005Joker bkpn: WERA 6005 Joker bkpn_clear: WERA 6005Joker c_path: Home / Tools / Hand tools / Keys / Keys / Open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera open-ended spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020310001 sr_ns: WERA05020310001
r: 03057697 p: 7.272 pid: 33704 b: WERA q: 0 st: lt: 12 ean: 4013288208002 sr: WERA 05023350001 sr_no_br: 05023350001 sr_no_br_cl: 05023350001 sr_cl: WERA05023350001 sr_dash: sold: 7.272 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Width across flats 7 mm With ball head No With handle Yes Handle type T-handle VDE approved No With safety colour code 1000V No Non-sparking No Surface treatment Chrome plated Blade length 200 mm Short arm length 20 mm Overall length 200 mm Product Range Wera Hex-Plus n: WERA 454 HF T-handle hex screwdriver Hex-Plus with holding function, 7 x 200 mm - 05023350001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description T-handle screwdriver: The ideal handle shape allows the transmission of particularly high tightening and loosening moments. The ergonomic shape of the handle fills the ball of the hand well, the fingers lie securely in the softly rounded recessed grips. The whole hand comes into contact with the handle and friction losses between hand and handle are avoided. With holding function to hold the hexagonal socket screw securely on the tool. Special surface treatment for high corrosion protection and optimal fitting accuracy in the screw. T-handle screwdriver for the transmission of particularly high tightening and loosening torque Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working With additional short arm for the transmission of extremely high torques due to the leverage of the long arm With holding function (HF) on the long arm to securely hold the screw on the tool Take it easy tool finder: colour coding according to profile and size Application Hexagon socket screws Blade Hexagon Design With long and short arm, Hex-Plus, bevelled, matte chrome-plated, with holding function for hexagon socket screws on the long arm Handle T-shape, 2 components, with hole for hanging. With Take it easy tool finder: Colour coding by profiles (blue = hexagon socket) and size stamping. Features and benefits The ergonomically shaped 2-component T-handle with finger recesses and pleasant surface facilitates very high power transmission and fatigue-free working. A spring loaded ball ensures the hexagon socket screw to be clamped on the tool tip. Especially helpful in hard to reach areas where you can not use your other hand to hold the screw. The additional short arm, which emerges laterally from the handle, allows the transmission of extremely high torques by using the long arm as a lever. By using the blade as an extension of your lower arm you can transfer particularly high torque. Due to the special surface treatment, the blades receive a high level of corrosion protection. The optimum fitting accuracy of the screw is also guaranteed. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 454 HF T-handle hexagon screwdriver Hex-Plus with holding function, 7 x 200 mm kts: T-handle hex screwdriver Hex-Plus with holding function, 7 x 200 mm kpn: 454 HF kpn_dash: kpn_clear: 454HF bkpn: WERA 454 HF bkpn_clear: WERA 454HF c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05023350001 sr_ns: WERA05023350001
r: 02686823 p: 7.04 pid: 45929 b: WERA q: 0 st: lt: 8 ean: 4013288117182 sr: WERA 05022713001 sr_no_br: 05022713001 sr_no_br_cl: 05022713001 sr_cl: WERA05022713001 sr_dash: sold: 7.04 p_range: none type: standard act: 1 avo: 1 av: Width across flats 9/64" Non-sparking No Overall length 130 mm Blade length 130 mm Surface treatment None Short arm length 22 mm With safety colour code 1000V No VDE approved No Handle type With handle No With ball head Yes n: WERA 3950 PKL stainless steel pin spanner 9/64" x 130 mm - 05022713001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description High quality L-keys out of stainless steel for imperial hexagonal socket screws by Wera. Stainless steel prevents the formation of extraneous rust. The Hex-Plus profile offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. Hexagonal ballpoint end on the long arm: the ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. Solution to the extraneous rust problem: fasten stainless screws with stainless tools For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Hexagonal ballpoint on the long arm Imperial Application Hexagon socket screws Design Stainless steel Tip Hex-Plus, ball-end hexagon on long arm Features and benefits Stainless L-keys are hardened to the same strength as conventional (carbon) steel tools, and prevent extraenous rust forming. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. ds: dsc: Scope of delivery 3950 PKL L-key, Imperial, stainless, 9/64" x 130 mm kts: stainless steel pin spanner 9/64" x 130 mm kpn: 3950 PKL kpn_dash: kpn_clear: 3950PKL bkpn: WERA 3950 PKL bkpn_clear: WERA 3950PKL c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05022713001 sr_ns: WERA05022713001
r: 02833877 p: 6.96 pid: 41921 b: WERA q: 0 st: lt: 12 ean: 4013288185280 sr: WERA 05024175001 sr_no_br: 05024175001 sr_no_br_cl: 05024175001 sr_cl: WERA05024175001 sr_dash: sold: 6.96 p_range: none type: standard act: 1 avo: 1 av: Drive size T25 With handle No Handle type Overall length 104 mm Width 21 mm Drive (pin key) Torx n: WERA 967 SL TORX HF socket spanner with holding function, TX 25 x 104 mm - 05024175001 cn: PIN KEY cn2: PIN KEY cn_clear: PINKEY d: Product description High quality L-keys for recessed TORX® screws. With holding function (HF) on the long arm to securely hold the screw on the tool. The BlackLaser surface treatment provides outstanding corrosion protection and a long service life. Take it easy Tool Finder with colour coding according to size. L-keys for recessed TORX® screws With holding function (HF) on the long arm to securely hold the screw on the tool BlackLaser for high corrosion protection and long service life With Take it easy tool finder: colour coding by size Application TORX® socket screws Design Round Tip TORX® on short arm, holding function for TORX® screws made according to Acument Intellectual Properties specifications on long arm, BlackLaser, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Features and benefits Holding function for recessed TORX® screws In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! L-keys with a thermoplastic sleeve are manufactured out of easy-to-grip, circular material. The sleeve ensures that work is safe and comfortable even at low temperatures. High corrosion protection features thanks to the special BlackLaser surface treatment. Colour coding and large stamp to enable the desired L-key to be easily located. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 967 SL TORX® HF L-key Multicolour with holding function, TX 25 x 104 mm kts: socket spanner with holding function, TX 25 x 104 mm kpn: 967 SL TORX HF kpn_dash: kpn_clear: 967SLTORXHF bkpn: WERA 967 SL TORX HF bkpn_clear: WERA 967SLTORXHF c_path: Home / Tools / Hand tools / Keys / Keys / Pin key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera pin key sr_no_br_cl_ns: 05024175001 sr_ns: WERA05024175001
r: 03232955 p: 6.95 pid: 69863 b: WERA q: 0 st: lt: 13 ean: 4013288221452 sr: WERA 05022852001 sr_no_br: 05022852001 sr_no_br_cl: 05022852001 sr_cl: WERA05022852001 sr_dash: sold: 6.95 p_range: none type: standard act: 1 avo: 1 av: Width across flats 1/8" With ball head Yes With handle No Handle type VDE approved No With safety colour code 1000V No Non-sparking No Surface treatment None Blade length 123 mm Short arm length 21 mm Overall length 123 mm n: WERA 3950 SPKL Multicolour Imperial stainless steel spanner 1/8" x 123 mm - 05022852001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description Premium L-key made of stainless steel for imperial hexagonal socket screws by Wera. Stainless steel prevents transmission of extraneous rust. The Hex-Plus profile offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw head is almost eliminated. With hexagonal ball tip at the long arm: The ball-shaped tip profiles enable the tool shaft to be moved and pivoted relative to the screw axis which allows screwdriving "around the corner". Take it easy tool finder with colour coding by size. L-keys for hexagonal socket screws Stainless L-keys are hardened to the same strength as conventional (carbon) steel tools, and prevent extraenous rust forming. Hex-Plus allows socket head screws to live longer Rubber sleeve for pleasant grip Hexagonal ballpoint on the long arm Application Hexagonal socket screws Design Stainless steel, hose sleeve. All L-keys are always at your fingertips thanks to their colour coding and size stamping. Tip Hex-Plus, hexagonal ball tip at the long arm Features and benefits Stainless L-keys are hardened to the same strength as conventional (carbon) steel tools, and prevent extraenous rust forming. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. L-keys made from circular material fit into the hand better and allow less strenuous work over a longer period. Additionally, the rubber sleeve provides a pleasant grip, particularly in applications at low temperatures. Colour coding and large stamp enable the desired L-key to be easily located. Moreover, the round material keys are more robust, particularly where smaller sizes are concerned. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 3950 SPKL Multicolour Imperial L-keys, imperial, stainless, 1/8" x 123 mm kts: stainless steel spanner 1/8" x 123 mm kpn: 3950 SPKL Multicolour Imperial kpn_dash: kpn_clear: 3950SPKLMulticolourImperial bkpn: WERA 3950 SPKL Multicolour Imperial bkpn_clear: WERA 3950SPKLMulticolourImperial c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05022852001 sr_ns: WERA05022852001
r: 02833881 p: 6.942 pid: 41935 b: WERA q: 0 st: lt: 12 ean: 4013288172679 sr: WERA 05024350001 sr_no_br: 05024350001 sr_no_br_cl: 05024350001 sr_cl: WERA05024350001 sr_dash: sold: 6.942 p_range: none type: standard act: 1 avo: 1 av: Drive size TT8 With handle No Handle type Overall length 76 mm Width 16 mm Drive (pin key) Torx Tamper Resistant n: WERA 967 SPKL TORX BO Multicolour open-end spanner, TX 8 x 76 mm - 05024350001 cn: PIN KEY cn2: PIN KEY cn_clear: PINKEY d: Product description Wera L-keys with finger-protecting plastic sleeves. This means they are ergonomic and pleasant to grip even in cold temperatures. At one end a TORX® BO profile: the bore hole in the bit and safety pin in the TORX® BO screw prevents any unauthorised loosening. Tamperproof fastening! The ballpoint on the long arm allows dependable working on TORX® screws even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. Laser-engraved and thereby wear-resistant size markings on the L-keys for rapid accessing. L-key for TORX® socket screws with safety pin TORX® ballpoint on the long arm Colour coded, easy-to-grip plastic sleeve, even at low temperatures Wear-resistant size marking BlackLaser for high corrosion protection and long service life Application TORX® socket screws with and without pin (BO = bore hole) Design BlackLaser, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip TORX® on short arm, TORX® ball end on long arm Features and benefits L-key for TORX® socket screws with safety pin L-keys with a thermoplastic sleeve are manufactured out of easy-to-grip, circular material. The sleeve ensures that work is safe and comfortable even at low temperatures. High corrosion protection features thanks to the special BlackLaser surface treatment. Colour coding and large stamp to enable the desired L-key to be easily located. TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that "normal" TORX® tools cannot be used. This pin fits into the borehole of TORX® BO tools allowing safety screws to be unfastened. The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 967 SPKL TORX® BO L-key Multicolour, TX 8 x 76 mm kts: open-end spanner, TX 8 x 76 mm kpn: 967 SPKL TORX BO Multicolour kpn_dash: kpn_clear: 967SPKLTORXBOMulticolour bkpn: WERA 967 SPKL TORX BO Multicolour bkpn_clear: WERA 967SPKLTORXBOMulticolour c_path: Home / Tools / Hand tools / Keys / Keys / Pin key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera pin key sr_no_br_cl_ns: 05024350001 sr_ns: WERA05024350001
r: 03228570 p: 6.942 pid: 71667 b: WERA q: 0 st: lt: 12 ean: 4013288194282 sr: WERA 05024482001 sr_no_br: 05024482001 sr_no_br_cl: 05024482001 sr_cl: WERA05024482001 sr_dash: sold: 6.942 p_range: none type: standard act: 1 avo: 1 av: Drive size T9 With handle No Handle type Overall length 101 mm Width 16 mm Drive (pin key) Torx n: WERA 967 SXL TORX Multicolour open-end spanner, long, TX 9 x 101 mm - 05024482001 cn: PIN KEY cn2: PIN KEY cn_clear: PINKEY d: Product description Wera L-key with hose sleeve to protect the fingers, ergonomic and comfortable hold even at low temperatures. The BlackLaser surface treatment makes for excellent surface protection, even from corrosion, and for long durability. Lasered and therefore abrasion-proof size marking on the L-key for quick access. With Take it easy tool finder: colour coding by size L-keys for recessed TORX® screws Colour coded, easy-to-grip plastic sleeve, even at low temperatures Long version Zinc phosphate plated Application TORX® socket screws Design Zinc-phosphated, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip TORX® Features and benefits L-keys with a thermoplastic sleeve are manufactured out of easy-to-grip, circular material. The sleeve ensures that work is safe and comfortable even at low temperatures. High corrosion protection features thanks to the special BlackLaser surface treatment. Colour coding and large stamp to enable the desired L-key to be easily located. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 967 SXL TORX® L-key Multicolour, long, TX 9 x 101 mm kts: open-end spanner, long, TX 9 x 101 mm kpn: 967 SXL TORX Multicolour kpn_dash: kpn_clear: 967SXLTORXMulticolour bkpn: WERA 967 SXL TORX Multicolour bkpn_clear: WERA 967SXLTORXMulticolour c_path: Home / Tools / Hand tools / Keys / Keys / Pin key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera pin key sr_no_br_cl_ns: 05024482001 sr_ns: WERA05024482001
r: 02833876 p: 6.66 pid: 31239 b: WERA q: 0 st: lt: 12 ean: 4013288185273 sr: WERA 05024174001 sr_no_br: 05024174001 sr_no_br_cl: 05024174001 sr_cl: WERA05024174001 sr_dash: sold: 6.66 p_range: none type: standard act: 1 avo: 1 av: Drive size T20 With handle No Handle type Overall length 96 mm Width 19 mm Drive (pin key) Torx n: WERA 967 SL TORX HF socket spanner with holding function, TX 20 x 96 mm - 05024174001 cn: PIN KEY cn2: PIN KEY cn_clear: PINKEY d: Product description High quality L-keys for recessed TORX® screws. With holding function (HF) on the long arm to securely hold the screw on the tool. The BlackLaser surface treatment provides outstanding corrosion protection and a long service life. Take it easy Tool Finder with colour coding according to size. L-keys for recessed TORX® screws With holding function (HF) on the long arm to securely hold the screw on the tool BlackLaser for high corrosion protection and long service life With Take it easy tool finder: colour coding by size Application TORX® socket screws Design Round Tip TORX® on short arm, holding function for TORX® screws made according to Acument Intellectual Properties specifications on long arm, BlackLaser, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Features and benefits Holding function for recessed TORX® screws In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! L-keys with a thermoplastic sleeve are manufactured out of easy-to-grip, circular material. The sleeve ensures that work is safe and comfortable even at low temperatures. High corrosion protection features thanks to the special BlackLaser surface treatment. Colour coding and large stamp to enable the desired L-key to be easily located. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 967 SL TORX® HF L-key Multicolour with holding function, TX 20 x 96 mm kts: socket spanner with holding function, TX 20 x 96 mm kpn: 967 SL TORX HF kpn_dash: kpn_clear: 967SLTORXHF bkpn: WERA 967 SL TORX HF bkpn_clear: WERA 967SLTORXHF c_path: Home / Tools / Hand tools / Keys / Keys / Pin key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera pin key sr_no_br_cl_ns: 05024174001 sr_ns: WERA05024174001
r: 02833766 p: 6.57 pid: 41903 b: WERA q: 0 st: lt: 12 ean: 4013288182579 sr: WERA 05022637001 sr_no_br: 05022637001 sr_no_br_cl: 05022637001 sr_cl: WERA05022637001 sr_dash: sold: 6.57 p_range: none type: standard act: 1 avo: 1 av: Width across flats 5/16" With ball head Yes With handle No Handle type VDE approved No With safety colour code 1000V No Non-sparking No Blade length 195 mm Short arm length 37 mm Overall length 195 mm n: WERA 950 SPKL socket spanner multicolour 5/16" x 195 mm - 05022637001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description Wera L-keys with finger-protecting plastic sleeves for imperial socket head screws. This means they are ergonomic and pleasant to grip even in cold temperatures. The Hex Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. The ballpoint on the long arm allows dependable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. Laser-engraved and thereby wear-resistant size markings on the L-keys for rapid accessing. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer Rubber sleeve for pleasant grip Hexagonal ballpoint on the long arm BlackLaser for high corrosion protection and long service life Application Hexagon socket screws Design BlackLaser surface, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. L-keys made from circular material fit into the hand better and allow less strenuous work over a longer period. Additionally, the rubber sleeve provides a pleasant grip, particularly in applications at low temperatures. Colour coding and large stamp enable the desired L-key to be easily located. Moreover, the round material keys are more robust, particularly where smaller sizes are concerned. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 950 SPKL L-key Multicolour, Imperial, 5/16" x 195 mm kts: socket spanner multicolour 5/16" x 195 mm kpn: 950 SPKL kpn_dash: kpn_clear: 950SPKL bkpn: WERA 950 SPKL bkpn_clear: WERA 950SPKL c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05022637001 sr_ns: WERA05022637001
r: 03228453 p: 6.32 pid: 69981 b: WERA q: 0 st: lt: 12 ean: 4013288211941 sr: WERA 05022672001 sr_no_br: 05022672001 sr_no_br_cl: 05022672001 sr_cl: WERA05022672001 sr_dash: sold: 6.32 p_range: none type: standard act: 1 avo: 1 av: Width across flats 3 mm With ball head Yes With handle No Handle type VDE approved No With safety colour code 1000V No Non-sparking No Blade length 71 mm Short arm length 21 mm Overall length 71 mm n: WERA 950 SPKS socket spanner multi-colour metric 3 x 71 mm - 05022672001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description High quality Wera L-keys with colour coded, convenient plastic sleeve. This means that the tool is quickly accessible and the ergonomic and pleasant handle is easy on the hands even at low temperatures. Hex-Plus L-keys provide larger contact surfaces on the screw head. The notching effect is thereby reduced to a minimum; the destruction of the screw head is almost eliminated. The ball on the long arm allows safe working even in difficult mounting positions. The BlackLaser surface treatment provides excellent surface protection, corrosion resistance and long life. Laser coated abrasion-resistant size markings on the L-keys for quick access. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer Colour coded, easy-to-grip plastic sleeve, even at low temperatures Hexagonal ballpoint on the long arm Wear-resistant size marking Application Hexagon socket screws Design BlackLaser surface, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. L-keys made from circular material fit into the hand better and allow less strenuous work over a longer period. Additionally, the rubber sleeve provides a pleasant grip, particularly in applications at low temperatures. Colour coding and large stamp enable the desired L-key to be easily located. Moreover, the round material keys are more robust, particularly where smaller sizes are concerned. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 950 SPKS L-key Multicolour, metric, 3 x 71 mm kts: socket spanner multi-colour metric 3 x 71 mm kpn: 950 SPKS kpn_dash: kpn_clear: 950SPKS bkpn: WERA 950 SPKS bkpn_clear: WERA 950SPKS c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05022672001 sr_ns: WERA05022672001
r: 02833875 p: 6.26 pid: 41882 b: WERA q: 0 st: lt: 12 ean: 4013288185266 sr: WERA 05024173001 sr_no_br: 05024173001 sr_no_br_cl: 05024173001 sr_cl: WERA05024173001 sr_dash: sold: 6.26 p_range: none type: standard act: 1 avo: 1 av: Drive size T15 With handle No Handle type Overall length 90 mm Width 18 mm Drive (pin key) Torx n: WERA 967 SL TORX HF socket spanner with holding function, TX 15 x 90 mm - 05024173001 cn: PIN KEY cn2: PIN KEY cn_clear: PINKEY d: Product description High quality L-keys for recessed TORX® screws. With holding function (HF) on the long arm to securely hold the screw on the tool. The BlackLaser surface treatment provides outstanding corrosion protection and a long service life. Take it easy Tool Finder with colour coding according to size. L-keys for recessed TORX® screws With holding function (HF) on the long arm to securely hold the screw on the tool BlackLaser for high corrosion protection and long service life With Take it easy tool finder: colour coding by size Application TORX® socket screws Design Round Tip TORX® on short arm, holding function for TORX® screws made according to Acument Intellectual Properties specifications on long arm, BlackLaser, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Features and benefits Holding function for recessed TORX® screws In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! L-keys with a thermoplastic sleeve are manufactured out of easy-to-grip, circular material. The sleeve ensures that work is safe and comfortable even at low temperatures. High corrosion protection features thanks to the special BlackLaser surface treatment. Colour coding and large stamp to enable the desired L-key to be easily located. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 967 SL TORX® HF L-key Multicolour with holding function, TX 15 x 90 mm kts: socket spanner with holding function, TX 15 x 90 mm kpn: 967 SL TORX HF kpn_dash: kpn_clear: 967SLTORXHF bkpn: WERA 967 SL TORX HF bkpn_clear: WERA 967SLTORXHF c_path: Home / Tools / Hand tools / Keys / Keys / Pin key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera pin key sr_no_br_cl_ns: 05024173001 sr_ns: WERA05024173001
r: 02833837 p: 5.88 pid: 41899 b: WERA q: 0 st: lt: 11 ean: 4013288104861 sr: WERA 05024163001 sr_no_br: 05024163001 sr_no_br_cl: 05024163001 sr_cl: WERA05024163001 sr_dash: sold: 5.88 p_range: none type: standard act: 1 avo: 1 av: Drive size T15 With handle No Handle type Overall length 90 mm Width 18 mm Drive (pin key) Torx n: WERA 967 L TORX HF socket spanner with holding function, BlackLaser, TX 15 x 90 mm - 05024163001 cn: PIN KEY cn2: PIN KEY cn_clear: PINKEY d: Product description High quality L-keys for recessed TORX® screws. With holding function (HF) on the long arm to securely hold the screw on the tool. Comes with extra-long arm. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. L-keys for recessed TORX® screws The holding function on the long arm keeps screws securely on the tool BlackLaser for high corrosion protection and long service life Laser-engraved and thereby wear-resistant size markings Application TORX® socket screws Design Round, BlackLaser surface Tip TORX® on short arm, holding function for TORX® screws made according to Acument Intellectual Properties specifications on long arm Features and benefits In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. L-keys with BlackLaser surface treatment for outstanding surface protection and long service life. High corrosion protection. ds: dsc: Scope of delivery 967 L TORX® HF L-key with holding function, BlackLaser, TX 15 x 90 mm kts: socket spanner with holding function, BlackLaser, TX 15 x 90 mm kpn: 967 L TORX HF kpn_dash: kpn_clear: 967LTORXHF bkpn: WERA 967 L TORX HF bkpn_clear: WERA 967LTORXHF c_path: Home / Tools / Hand tools / Keys / Keys / Pin key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera pin key sr_no_br_cl_ns: 05024163001 sr_ns: WERA05024163001
r: 02833872 p: 5.87 pid: 41499 b: WERA q: 0 st: lt: 11 ean: 4013288185242 sr: WERA 05024171001 sr_no_br: 05024171001 sr_no_br_cl: 05024171001 sr_cl: WERA05024171001 sr_dash: sold: 5.87 p_range: none type: standard act: 1 avo: 1 av: Drive size T9 With handle No Handle type Overall length 79 mm Width 16 mm Drive (pin key) Torx n: WERA 967 SL TORX HF socket spanner with holding function, TX 9 x 79 mm - 05024171001 cn: PIN KEY cn2: PIN KEY cn_clear: PINKEY d: Product description High quality L-keys for recessed TORX® screws. With holding function (HF) on the long arm to securely hold the screw on the tool. The BlackLaser surface treatment provides outstanding corrosion protection and a long service life. Take it easy Tool Finder with colour coding according to size. L-keys for recessed TORX® screws With holding function (HF) on the long arm to securely hold the screw on the tool BlackLaser for high corrosion protection and long service life With Take it easy tool finder: colour coding by size Application TORX® socket screws Design Round Tip TORX® on short arm, holding function for TORX® screws made according to Acument Intellectual Properties specifications on long arm, BlackLaser, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Features and benefits Holding function for recessed TORX® screws In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! L-keys with a thermoplastic sleeve are manufactured out of easy-to-grip, circular material. The sleeve ensures that work is safe and comfortable even at low temperatures. High corrosion protection features thanks to the special BlackLaser surface treatment. Colour coding and large stamp to enable the desired L-key to be easily located. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 967 SL TORX® HF L-key Multicolour with holding function, TX 9 x 79 mm kts: socket spanner with holding function, TX 9 x 79 mm kpn: 967 SL TORX HF kpn_dash: kpn_clear: 967SLTORXHF bkpn: WERA 967 SL TORX HF bkpn_clear: WERA 967SLTORXHF c_path: Home / Tools / Hand tools / Keys / Keys / Pin key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera pin key sr_no_br_cl_ns: 05024171001 sr_ns: WERA05024171001
r: 02833836 p: 5.71 pid: 41893 b: WERA q: 0 st: lt: 11 ean: 4013288104854 sr: WERA 05024162001 sr_no_br: 05024162001 sr_no_br_cl: 05024162001 sr_cl: WERA05024162001 sr_dash: sold: 5.71 p_range: none type: standard act: 1 avo: 1 av: Drive size T10 With handle No Handle type Overall length 85 mm Width 17 mm Drive (pin key) Torx n: WERA 967 L TORX HF socket spanner with holding function, BlackLaser, TX 10 x 85 mm - 05024162001 cn: PIN KEY cn2: PIN KEY cn_clear: PINKEY d: Product description High quality L-keys for recessed TORX® screws. With holding function (HF) on the long arm to securely hold the screw on the tool. Comes with extra-long arm. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. L-keys for recessed TORX® screws The holding function on the long arm keeps screws securely on the tool BlackLaser for high corrosion protection and long service life Laser-engraved and thereby wear-resistant size markings Application TORX® socket screws Design Round, BlackLaser surface Tip TORX® on short arm, holding function for TORX® screws made according to Acument Intellectual Properties specifications on long arm Features and benefits In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. L-keys with BlackLaser surface treatment for outstanding surface protection and long service life. High corrosion protection. ds: dsc: Scope of delivery 967 L TORX® HF L-key with holding function, BlackLaser, TX 10 x 85 mm kts: socket spanner with holding function, BlackLaser, TX 10 x 85 mm kpn: 967 L TORX HF kpn_dash: kpn_clear: 967LTORXHF bkpn: WERA 967 L TORX HF bkpn_clear: WERA 967LTORXHF c_path: Home / Tools / Hand tools / Keys / Keys / Pin key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera pin key sr_no_br_cl_ns: 05024162001 sr_ns: WERA05024162001
