r: 03166864 p: 39.338 pid: 30491 b: WERA q: 1 st: 1 lt: 1 ean: 4013288212771 sr: WERA 05020261001 sr_no_br: 05020261001 sr_no_br_cl: 05020261001 sr_cl: WERA05020261001 sr_dash: sold: 472.056 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 1 22 mm Length 260,5 mm Non-sparking No VDE approved No With safety colour code 1000V Surface treatment Chrome plated Width across flats 2 24 mm Product Range Wera Joker n: WERA 6002 Joker Double double open-end spanner, 22 x 24 x 260.5 mm - 05020261001 cn: OPEN-ENDED SPANNER cn2: OPEN-ENDED SPANNER cn_clear: OPENENDEDSPANNER d: Product description High-quality, metric double spanner from Wera: Everything a wrench can do and so much more. Faster, better, more beautiful. A real Joker! The new generation of double open-ended spanners. For hexagon screw heads and bolts. With holding function by a metal plate in the open end, which reduces the risk of losing screws and sockets. With its extra hard teeth the exchangeable metal plate in the open end secures screws and sockets and reduces the risk of slipping. The integrated end stop can prevent the screw head from slipping down and allows application of high torques. The double hexagon geometry ensures a positive connection with the screw or bolt and thus reduces the risk of slipping. A return angle of only 30° avoids time-consuming rotating of the wrench whilst screwdriving. The special forge geometry allows a high torque transmission and high bending stiffness. Made of high-performance chromium molybdenum steel with nickel-chromium coating for high corrosion protection. With tool finder Take it easy: colour coding by size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping The double-hex geometry reduces the risk of slipping Return angle of only 30° With Take it easy tool finder: colour coding by size Application Hexagon bolts and nuts Design Double open-end wrench Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. When we began to think about open-ended wrenches, we asked ourselves: why does the wrench always have to be flipped over; why does it have an offset design; why does it slip off injuring fingers? The new design of the open end resulted in a real "Joker" that works even when all other trumps have been played. The Joker double open-ended wrench is ideally suited for locking down nuts and bolts. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6002 Joker Double Open end wrenches, 22 x 24 x 260.5 mm kts: double open-end spanner, 22 x 24 x 260.5 mm kpn: 6002 Joker Double kpn_dash: kpn_clear: 6002JokerDouble bkpn: WERA 6002 Joker Double bkpn_clear: WERA 6002JokerDouble c_path: Home / Tools / Hand tools / Keys / Keys / Open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera open-ended spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020261001 sr_ns: WERA05020261001
r: 03176962 p: 94.173 pid: 32982 b: WERA q: 0 st: lt: 15 ean: 4013288214201 sr: WERA 05020241001 sr_no_br: 05020241001 sr_no_br_cl: 05020241001 sr_cl: WERA05020241001 sr_dash: sold: 470.865 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Min. width across flats 5/16 inch Max. width across flats 3/4 inch Supplied in Case Quantity per set 8 Product Range Wera Joker n: WERA 6003 Joker 8 Imperial Set 1 ring spanner set inch sizes 8-piece - 05020241001 cn: COMBINATION SPANNER SET cn2: COMBINATION SPANNER SET cn_clear: COMBINATIONSPANNERSET d: Product description As installation spaces become increasingly confined, it remains necessary that tools enable users to work successfully. Narrow spaces require additional placement points of the tool, to allow screws to be accessed and actuated. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be "taken" every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With Take it easy tool finder: colour coding by size. The Joker pouches are suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system thanks to the hook and loop fastener system on the back. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank Suitable for docking with the Wera 2go system Combination wrench set, open side offset by 7.5°8-piece setIn robust pouch Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The Joker pouches are suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system thanks to the hook and loop fastener system on the back. ds: dsc: Scope of delivery 6003 Joker 8 Imperial Set 1 Combination wrench set, Imperial, 8 pieces 8x 6003 Joker Combination wrench, Imperial: 5/16"x115 mm, 3/8"x125 mm, 7/16"x135 mm, 1/2"x160 mm, 9/16"x167 mm, 5/8"x182 mm, 11/16"x210 mm, 3/4"x230 mm 1x Hook and Loop Fastener Strip 240: 50 x 240 mm kts: ring spanner set inch sizes 8-piece kpn: 6003 Joker 8 Imperial Set 1 kpn_dash: kpn_clear: 6003Joker8ImperialSet1 bkpn: WERA 6003 Joker 8 Imperial Set 1 bkpn_clear: WERA 6003Joker8ImperialSet1 c_path: Home / Tools / Hand tools / Keys / Sets / Combination spanner set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera combination spanner set | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020241001 sr_ns: WERA05020241001
r: 02828957 p: 34.38 pid: 44490 b: WERA q: 0 st: lt: 14 ean: 4013288184726 sr: WERA 05020070001 sr_no_br: 05020070001 sr_no_br_cl: 05020070001 sr_cl: WERA05020070001 sr_dash: sold: 446.94 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 15 mm Overall length 199 mm Product Range Wera Joker n: WERA 6001 Joker Switch socket and ring spanner, switchable, 15 x 199 mm - 05020070001 cn: RATCHET COMBINATION SPANNER cn2: RATCHET COMBINATION SPANNER cn_clear: RATCHETCOMBINATIONSPANNER d: Product description Joker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bolt head downwards and enables higher torque to be applied. The exchangeable metal plate in the jaw securely holds nuts and bolts with its extra hard teeth and reduces the risk of slipping. The double-hex geometry delivers a very positive connection with nuts or bolts and again provides for a lower risk of any slipping. The low return angle of only 30° at the jaw end avoids any time-consuming flipping of the wrench when fastening. The reversible ratchet mechanism at the ring end with its fine toothing (80 teeth) ensures great flexibility even in confined spaces. Audibly precise ratchet mechanism. Additionally, the robust two-piece locking element provides for an extreme stability. Comes with a 15° tilted ratchet end for secure work even at high torque. The special forged geometry allows for high torque transfer and high flexural rigidity. Manufactured out of high-performance chrome-molybdenum steel with a nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding according to size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping Very fine toothing and robust locking element Ratchet end tilted by 15° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench, switch lever for convenient change of direction; ring end tilted at 15° from the handle Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. The direction of the fine-tooth ratchet mechanism can easily be changed via the smooth switch lever. The ratchet end is tilted at 15° to the tool axis, making application of the tool in confined spaces much easier. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6001 Joker Switch Ratcheting combination wrench, with switch lever, 15 x 199 mm kts: socket and ring spanner, switchable, 15 x 199 mm kpn: 6001 Joker Switch kpn_dash: kpn_clear: 6001JokerSwitch bkpn: WERA 6001 Joker Switch bkpn_clear: WERA 6001JokerSwitch c_path: Home / Tools / Hand tools / Keys / Keys / Ratchet combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratchet combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020070001 sr_ns: WERA05020070001
r: 03166862 p: 39.834 pid: 31393 b: WERA q: 1 st: 1 lt: 1 ean: 4013288212788 sr: WERA 05020262001 sr_no_br: 05020262001 sr_no_br_cl: 05020262001 sr_cl: WERA05020262001 sr_dash: sold: 358.506 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 1 24 mm Length 280 mm Non-sparking No VDE approved No With safety colour code 1000V Surface treatment Chrome plated Width across flats 2 27 mm Product Range Wera Joker n: WERA 6002 Joker Double double open-end spanner, 24 x 27 x 280 mm - 05020262001 cn: OPEN-ENDED SPANNER cn2: OPEN-ENDED SPANNER cn_clear: OPENENDEDSPANNER d: Product description High-quality, metric double spanner from Wera: Everything a wrench can do and so much more. Faster, better, more beautiful. A real Joker! The new generation of double open-ended spanners. For hexagon screw heads and bolts. With holding function by a metal plate in the open end, which reduces the risk of losing screws and sockets. With its extra hard teeth the exchangeable metal plate in the open end secures screws and sockets and reduces the risk of slipping. The integrated end stop can prevent the screw head from slipping down and allows application of high torques. The double hexagon geometry ensures a positive connection with the screw or bolt and thus reduces the risk of slipping. A return angle of only 30° avoids time-consuming rotating of the wrench whilst screwdriving. The special forge geometry allows a high torque transmission and high bending stiffness. Made of high-performance chromium molybdenum steel with nickel-chromium coating for high corrosion protection. With tool finder Take it easy: colour coding by size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping The double-hex geometry reduces the risk of slipping Return angle of only 30° With Take it easy tool finder: colour coding by size Application Hexagon bolts and nuts Design Double open-end wrench Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. When we began to think about open-ended wrenches, we asked ourselves: why does the wrench always have to be flipped over; why does it have an offset design; why does it slip off injuring fingers? The new design of the open end resulted in a real "Joker" that works even when all other trumps have been played. The Joker double open-ended wrench is ideally suited for locking down nuts and bolts. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6002 Joker Double Open end wrenches, 24 x 27 x 280 mm kts: double open-end spanner, 24 x 27 x 280 mm kpn: 6002 Joker Double kpn_dash: kpn_clear: 6002JokerDouble bkpn: WERA 6002 Joker Double bkpn_clear: WERA 6002JokerDouble c_path: Home / Tools / Hand tools / Keys / Keys / Open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera open-ended spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020262001 sr_ns: WERA05020262001
r: 02688544 p: 17.685 pid: 44756 b: WERA q: 2 st: 1 lt: 1 ean: 4013288167323 sr: WERA 05073272001 sr_no_br: 05073272001 sr_no_br_cl: 05073272001 sr_cl: WERA05073272001 sr_dash: sold: 353.7 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 12 mm Overall length 170,7 mm Type of drive profile Twelve-point Product Range Wera Joker n: WERA 6000 Joker socket and ring spanner, 12 x 170.7 mm - 05073272001 cn: RATCHET COMBINATION SPANNER cn2: RATCHET COMBINATION SPANNER cn_clear: RATCHETCOMBINATIONSPANNER d: Product description Premium metric ring ratchet spanner by Wera: Everything a wrench can do and so much more. Faster, better, more beautiful. A real Joker. The new generation of ring ratchet spanners. For hexagon screw heads and bolts. With holding function enabled by a metal plate in the mouth, which reduces the risk of losing screws and sockets. With its extra hard teeth, the exchangeable metal plate in the mouth secures screws and sockets and reduces the risk of slipping. The integrated end stop can prevent the screw head from slipping down and allows application of high torques. The double hexagon geometry ensures a positive connection with the screw or bolt and thus reduces the risk of slipping. A return angle of only 30° at the jaw end avoids time-consuming rotating of the tool whilst screwdriving. Ratchet mechanism at the ring side with exceptionally high fine toothing of 80 teeth for flexibility even in confined spaces. The specially engineered geometry allows high torque transmission and high bending stiffness. Made of high-performance chromium molybdenum steel with nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding by size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping The double-hex geometry reduces the risk of slipping Return angle of only 30° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench Features and benefits The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined working spaces. When we began to think about open-ended wrenches, we asked ourselves: why does the wrench always have to be flipped over; why does it have an offset design; why does it slip off injuring fingers? The new design of the open end resulted in a real "Joker" that works even when all other trumps have been played. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6000 Joker Ratcheting combination wrenches, 12 x 170.7 mm kts: socket and ring spanner, 12 x 170.7 mm kpn: 6000 Joker kpn_dash: kpn_clear: 6000Joker bkpn: WERA 6000 Joker bkpn_clear: WERA 6000Joker c_path: Home / Tools / Hand tools / Keys / Keys / Ratchet combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratchet combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05073272001 sr_ns: WERA05073272001
r: 03210967 p: 24.628 pid: 69529 b: WERA q: 0 st: lt: 9 ean: 4013288216892 sr: WERA 05020099001 sr_no_br: 05020099001 sr_no_br_cl: 05020099001 sr_cl: WERA05020099001 sr_dash: sold: 344.792 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 1 7 mm Length 117 mm Non-sparking No VDE approved No With safety colour code 1000V Surface treatment Chrome plated Width across flats 2 10 mm Product Range Wera Joker n: WERA 6004 Joker XS self-adjusting spanner, 7-10 x 1/4-3/8" x 117 mm - 05020099001 cn: OPEN-ENDED SPANNER cn2: OPEN-ENDED SPANNER cn_clear: OPENENDEDSPANNER d: Product description Many users wish to have a universal screwdriving tool with the widest possible range of applications. It should be a single tool for multiple metric and imperial dimensions. It should automatically adjust to the different screw sizes. It should be safe to grab without damaging anything and should allow for high working speeds. With its continuous and parallel jaws the Joker 6004 replaces several single spanner sizes. The required size is automatically and continuously set when attaching the tool to the hexagon bolt or screw. The integrated lever mechanism securely clamps the hexagon screw or bolt between the jaws, which significantly reduces the risk of slippage or damage. The ratchet feature ensures fast and consistent screwdriving without removing the tool. By using the corner-width rectangular prisms, a back-pivoting angle of only 30° can be achieved. The single-arm design, in conjunction with the ratchet feature and the corner-width prism, makes it possible to work even in confined spaces. The adjustable Joker 6004 is the universal screwdriving tool. Self-setting. Gripping. Spanning. For hexagon screw heads and bolts with wrench sizes 7.0; 8.0; 9.0; 10.0 (metric) For hexagon screw heads and bolts with wrench sizes 1/4"; 5/16"; 3/8" (imperial) Automatically and continuously gripping hexagon screws and bolts Lever mechanism upon gripping prevents slipping and damage With mechanical ratchet functionality for fast and consistent screwdriving without removing the spanner Application Hexagon screw heads and bolts with wrench size 7,0; 8,0; 9,0; 10,0 (metric) and 1/4"; 5/16"; 3/8" (imperial) Design Self-setting spanner with ratchet function; size-adjustable open end side, parallel smooth jaws, with 30° return angle due to the corner-width rectangular prisms in the jaws; hole for hanging Features and benefits With its automatically and continuously gripping parallel jaws the Joker spanner 6004 covers all dimensions in the respective field of application. The tool automatically finds the required size when placed on the bolt or screw, no setting required. The parallel smooth jaws of the Joker 6004 allow surface pressure and can thus prevent rounding of the bolt or screw head, which can occur during power transmission via the corners. The ratchet feature in the jaw ensures fast and consistent screwdriving without removing the tool. The corner-width rectangular prisms in the jaw allow a return angle of only 30°. Thanks to its hole the Joker can be neatly hung on the workshop wall. ds: dsc: Scope of delivery 6004 Joker XS Self-setting spanner, 7; 8; 9; 10 x 1/4; 5/16; 3/8"" x 117 mm kts: self-adjusting spanner, 7-10 x 1/4-3/8" x 117 mm kpn: 6004 Joker XS kpn_dash: kpn_clear: 6004JokerXS bkpn: WERA 6004 Joker XS bkpn_clear: WERA 6004JokerXS c_path: Home / Tools / Hand tools / Keys / Keys / Open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera open-ended spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020099001 sr_ns: WERA05020099001
r: 02688518 p: 21.446 pid: 44632 b: WERA q: 2 st: 1 lt: 1 ean: 4013288167330 sr: WERA 05073274001 sr_no_br: 05073274001 sr_no_br_cl: 05073274001 sr_cl: WERA05073274001 sr_dash: sold: 343.136 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 14 mm Overall length 188 mm Type of drive profile Twelve-point Product Range Wera Joker n: WERA 6000 Joker socket and ring spanner, 14 x 188 mm - 05073274001 cn: RATCHET COMBINATION SPANNER cn2: RATCHET COMBINATION SPANNER cn_clear: RATCHETCOMBINATIONSPANNER d: Product description Premium metric ring ratchet spanner by Wera: Everything a wrench can do and so much more. Faster, better, more beautiful. A real Joker. The new generation of ring ratchet spanners. For hexagon screw heads and bolts. With holding function enabled by a metal plate in the mouth, which reduces the risk of losing screws and sockets. With its extra hard teeth, the exchangeable metal plate in the mouth secures screws and sockets and reduces the risk of slipping. The integrated end stop can prevent the screw head from slipping down and allows application of high torques. The double hexagon geometry ensures a positive connection with the screw or bolt and thus reduces the risk of slipping. A return angle of only 30° at the jaw end avoids time-consuming rotating of the tool whilst screwdriving. Ratchet mechanism at the ring side with exceptionally high fine toothing of 80 teeth for flexibility even in confined spaces. The specially engineered geometry allows high torque transmission and high bending stiffness. Made of high-performance chromium molybdenum steel with nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding by size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping The double-hex geometry reduces the risk of slipping Return angle of only 30° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench Features and benefits The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined working spaces. When we began to think about open-ended wrenches, we asked ourselves: why does the wrench always have to be flipped over; why does it have an offset design; why does it slip off injuring fingers? The new design of the open end resulted in a real "Joker" that works even when all other trumps have been played. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6000 Joker Ratcheting combination wrenches, 14 x 188 mm kts: socket and ring spanner, 14 x 188 mm kpn: 6000 Joker kpn_dash: kpn_clear: 6000Joker bkpn: WERA 6000 Joker bkpn_clear: WERA 6000Joker c_path: Home / Tools / Hand tools / Keys / Keys / Ratchet combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratchet combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05073274001 sr_ns: WERA05073274001
r: 02828974 p: 40.165 pid: 42581 b: WERA q: 0 st: lt: 8 ean: 4013288184764 sr: WERA 05020074001 sr_no_br: 05020074001 sr_no_br_cl: 05020074001 sr_cl: WERA05020074001 sr_dash: sold: 321.32 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 19 mm Overall length 246 mm Product Range Wera Joker n: WERA 6001 Joker Switch socket and ratchet spanner, switchable, 19 x 246 mm - 05020074001 cn: RATCHET COMBINATION SPANNER cn2: RATCHET COMBINATION SPANNER cn_clear: RATCHETCOMBINATIONSPANNER d: Product description Joker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bolt head downwards and enables higher torque to be applied. The exchangeable metal plate in the jaw securely holds nuts and bolts with its extra hard teeth and reduces the risk of slipping. The double-hex geometry delivers a very positive connection with nuts or bolts and again provides for a lower risk of any slipping. The low return angle of only 30° at the jaw end avoids any time-consuming flipping of the wrench when fastening. The reversible ratchet mechanism at the ring end with its fine toothing (80 teeth) ensures great flexibility even in confined spaces. Audibly precise ratchet mechanism. Additionally, the robust two-piece locking element provides for an extreme stability. Comes with a 15° tilted ratchet end for secure work even at high torque. The special forged geometry allows for high torque transfer and high flexural rigidity. Manufactured out of high-performance chrome-molybdenum steel with a nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding according to size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping Very fine toothing and robust locking element Ratchet end tilted by 15° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench, switch lever for convenient change of direction; ring end tilted at 15° from the handle Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. The direction of the fine-tooth ratchet mechanism can easily be changed via the smooth switch lever. The ratchet end is tilted at 15° to the tool axis, making application of the tool in confined spaces much easier. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6001 Joker Switch Ratcheting combination wrench, with switch lever, 19 x 246 mm kts: socket and ratchet spanner, switchable, 19 x 246 mm kpn: 6001 Joker Switch kpn_dash: kpn_clear: 6001JokerSwitch bkpn: WERA 6001 Joker Switch bkpn_clear: WERA 6001JokerSwitch c_path: Home / Tools / Hand tools / Keys / Keys / Ratchet combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratchet combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020074001 sr_ns: WERA05020074001
r: 02829025 p: 13.884 pid: 42738 b: WERA q: 0 st: lt: 11 ean: 4013288168139 sr: WERA 05671382001 sr_no_br: 05671382001 sr_no_br_cl: 05671382001 sr_cl: WERA05671382001 sr_dash: sold: 319.332 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Accessory/Part type Case Product Range Wera Joker n: WERA 9452 case 6000 for 11 Joker socket and ratchet spanners, empty, 290 x 135 mm - 05671382001 cn: ACCESSORY/PART WRENCH cn2: ACCESSORY/PART WRENCH cn_clear: ACCESSORYPARTWRENCH d: Product description Robust pouch for 11 Jokers; with rubber label. Pouch for 11 Joker combination ratcheting wrenches, empty Robust bag with strong hook-and-loop fastener and hanger Offers space for 11 JOKER combination ratcheting wrenches Features and benefits ds: dsc: Scope of delivery 9452 Pouch 6000 for 11 Joker Ratcheting combination wrenches, 290 x 135 mm kts: case 6000 for 11 Joker socket and ratchet spanners, empty, 290 x 135 mm kpn: 9452 kpn_dash: kpn_clear: 9452 bkpn: WERA 9452 bkpn_clear: WERA 9452 c_path: Home / Tools / Hand tools / Keys / Accessories and spare parts / Accessory/part wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera accessories and spare parts / Wera accessory/part wrench | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05671382001 sr_ns: WERA05671382001
r: 03176909 p: 7.603 pid: 32955 b: WERA q: 0 st: lt: 9 ean: 4013288218773 sr: WERA 05020199001 sr_no_br: 05020199001 sr_no_br_cl: 05020199001 sr_cl: WERA05020199001 sr_dash: sold: 304.12 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 7 mm Length 110 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (7 x 110 mm) - 05020199001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 7 x 110 mm kts: ring spanner (7 x 110 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020199001 sr_ns: WERA05020199001
r: 03176903 p: 18.347 pid: 31953 b: WERA q: 0 st: lt: 8 ean: 4013288218858 sr: WERA 05020503001 sr_no_br: 05020503001 sr_no_br_cl: 05020503001 sr_cl: WERA05020503001 sr_dash: sold: 293.552 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 24 mm Length 280 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (24 x 280 mm) - 05020503001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 24 x 280 mm kts: ring spanner (24 x 280 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020503001 sr_ns: WERA05020503001
r: 03176898 p: 45.123 pid: 31940 b: WERA q: 0 st: lt: 15 ean: 4013288218896 sr: WERA 05020507001 sr_no_br: 05020507001 sr_no_br_cl: 05020507001 sr_cl: WERA05020507001 sr_dash: sold: 270.738 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 36 mm Length 460 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (36 x 460 mm) - 05020507001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 36 x 460 mm kts: ring spanner (36 x 460 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020507001 sr_ns: WERA05020507001
r: 08103833 p: 88.76 pid: 72289 b: WERA q: 0 st: lt: 8 ean: 4013288229847 sr: WERA 05020015001 sr_no_br: 05020015001 sr_no_br_cl: 05020015001 sr_cl: WERA05020015001 sr_dash: sold: 266.28 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Smallest size 8 mm Largest size 19 mm Supplied in On rack Quantity per set 6 Product Range Wera Joker n: WERA 9631 magneetstrip 6000 Joker 2 socket-ring spanner set 6-piece - 05020015001 cn: RATCHETING COMBINATION SPANNER SET cn2: RATCHETING COMBINATION SPANNER SET cn_clear: RATCHETINGCOMBINATIONSPANNERSET d: Product description Ring ratchet spanner set, 5-piece set, metric sizes; on a magnetic rail. The Joker 6000 ring ratchet spanner with holding function for hexagon screw heads and bolts. With its extra hard teeth, the exchangeable metal plate in the open end secures screws and sockets. The integrated end stop can prevent the screw head from slipping down and allows application of high torques. The double hexagon geometry ensures a positive connection with the screw or bolt and thus reduces the risk of slipping. A return angle of only 30° at the open end avoids time-consuming rotating of the wrench whilst screwdriving. Ratchet mechanism at the ring side with exceptionally high fine toothing of 80 teeth for flexibility even in confined spaces. The specially engineered geometry allows high torque transmission and high bending stiffness. Made of high-performance chromium molybdenum steel with nickel-chromium coating for high corrosion protection. With Take it easy Tool finder: Colour coding by size. The clips hold the tools perfectly. With its strong magnet, the rail holds securely to metal surfaces. It can also be bolted to the wall. 5-piece set With its strong magnet, the rail holds securely to metal surfaces. It can also be bolted to the wall. The clips hold the tools perfectly Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping Set of ratcheting combination wrenches, metric sizes5-piece setOn a magnetic rail Features and benefits The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined working spaces. The high-quality aluminium magnetic rail offers space for up to 11 spanners. The clamping springs hold the tools securely. With its strong magnet, the rail can be attached securely to metal surfaces. The rail can also be bolted to the wall. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. ds: dsc: Scope of delivery 9631 Magnetic rail 6000 Joker 2 Ratcheting combination wrenches set, 5 pieces 5x 6000 Joker Ratcheting combination wrenches: 8x144 mm, 10x159 mm, 13x177 mm, 17x224 mm, 19x246 mm 1x 9610 Joker Magnetic rail, for up to 11 spanners, empty: 30 x 370 mm kts: socket-ring spanner set 6-piece kpn: 9631 magneetstrip 6000 Joker 2 kpn_dash: kpn_clear: 9631magneetstrip6000Joker2 bkpn: WERA 9631 magneetstrip 6000 Joker 2 bkpn_clear: WERA 9631magneetstrip6000Joker2 c_path: Home / Tools / Hand tools / Keys / Sets / Ratchet combination spanner set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera ratchet combination spanner set | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020015001 sr_ns: WERA05020015001
r: 03176904 p: 17.685 pid: 32950 b: WERA q: 0 st: lt: 11 ean: 4013288218841 sr: WERA 05020502001 sr_no_br: 05020502001 sr_no_br_cl: 05020502001 sr_cl: WERA05020502001 sr_dash: sold: 247.59 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 22 mm Length 260 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (22 x 260 mm) - 05020502001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 22 x 260 mm kts: ring spanner (22 x 260 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020502001 sr_ns: WERA05020502001
r: 02828862 p: 119.669 pid: 42535 b: WERA q: 0 st: lt: 12 ean: 4013288184146 sr: WERA 05020092001 sr_no_br: 05020092001 sr_no_br_cl: 05020092001 sr_cl: WERA05020092001 sr_dash: sold: 239.338 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Type of drive profile Hexagonal Smallest size 7/16 inch Largest size 3/4 inch Quantity per set 4 Product Range Wera Joker n: WERA 6001 Joker Switch 4 Imperial Set 1 socket and ratchet spanner set, Inch, 4-piece - 05020092001 cn: RATCHETING COMBINATION SPANNER SET cn2: RATCHETING COMBINATION SPANNER SET cn_clear: RATCHETINGCOMBINATIONSPANNERSET d: Product description High quality set of ratcheting combination wrenches by Wera: Joker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bolt head downwards and enables higher torque to be applied. The exchangeable metal plate in the jaw securely holds nuts and bolts with its extra hard teeth and reduces the risk of slipping. The double-hex geometry delivers a very positive connection with nuts or bolts and again provides for a lower risk of any slipping. The low return angle of only 30° at the jaw end avoids any time-consuming flipping of the wrench when fastening. The reversible ratchet mechanism at the ring end with its fine toothing (80 teeth) ensures great flexibility even in confined spaces. Audibly precise ratchet mechanism. Additionally, the robust two-piece locking element provides for an extreme stability. Comes with a 15° tilted ratchet end for secure work even at high torque. The special forged geometry allows for high torque transfer and high flexural rigidity. Manufactured out of high-performance chrome-molybdenum steel with a nickel-chromium coating for high corrosion protection. With Take it easy Tool Finder: colour coding according to size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping Very fine toothing and robust locking element Ratchet end tilted by 15° With Take it easy tool finder: colour coding by size Set of ratcheting combination wrenches, reversible4-piece setDurable pouch Features and benefits The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined working spaces. The direction of the fine-tooth ratchet mechanism can easily be changed via the smooth switch lever. The ratchet end is tilted at 15° to the tool axis, making application of the tool in confined spaces much easier. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6001 Joker Switch 4 Imperial Set 1 Ratcheting combination wrenches set, Imperial, 4 pieces 4x 6001 Joker Switch Ratcheting combination wrench, with switch lever, Imperial: 7/16"x165 mm, 1/2"x171 mm, 9/16"x187 mm, 3/4"x246 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: socket and ratchet spanner set, Inch, 4-piece kpn: 6001 Joker Switch 4 Imperial Set 1 kpn_dash: kpn_clear: 6001JokerSwitch4ImperialSet1 bkpn: WERA 6001 Joker Switch 4 Imperial Set 1 bkpn_clear: WERA 6001JokerSwitch4ImperialSet1 c_path: Home / Tools / Hand tools / Keys / Sets / Ratchet combination spanner set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera ratchet combination spanner set | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020092001 sr_ns: WERA05020092001
r: 03228368 p: 38.801 pid: 70342 b: WERA q: 0 st: lt: 12 ean: 4013288212764 sr: WERA 05020260001 sr_no_br: 05020260001 sr_no_br_cl: 05020260001 sr_cl: WERA05020260001 sr_dash: sold: 232.806 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 1 20 mm Length 260,5 mm Non-sparking No VDE approved No With safety colour code 1000V Surface treatment Chrome plated Width across flats 2 22 mm Product Range Wera Joker n: WERA 6002 Joker Double double open-end spanner, 20 x 22 x 260.5 mm - 05020260001 cn: OPEN-ENDED SPANNER cn2: OPEN-ENDED SPANNER cn_clear: OPENENDEDSPANNER d: Product description High-quality, metric double spanner from Wera: Everything a wrench can do and so much more. Faster, better, more beautiful. A real Joker! The new generation of double open-ended spanners. For hexagon screw heads and bolts. With holding function by a metal plate in the open end, which reduces the risk of losing screws and sockets. With its extra hard teeth the exchangeable metal plate in the open end secures screws and sockets and reduces the risk of slipping. The integrated end stop can prevent the screw head from slipping down and allows application of high torques. The double hexagon geometry ensures a positive connection with the screw or bolt and thus reduces the risk of slipping. A return angle of only 30° avoids time-consuming rotating of the wrench whilst screwdriving. The special forge geometry allows a high torque transmission and high bending stiffness. Made of high-performance chromium molybdenum steel with nickel-chromium coating for high corrosion protection. With tool finder Take it easy: colour coding by size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping The double-hex geometry reduces the risk of slipping Return angle of only 30° With Take it easy tool finder: colour coding by size Application Hexagon bolts and nuts Design Double open-end wrench Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. When we began to think about open-ended wrenches, we asked ourselves: why does the wrench always have to be flipped over; why does it have an offset design; why does it slip off injuring fingers? The new design of the open end resulted in a real "Joker" that works even when all other trumps have been played. The Joker double open-ended wrench is ideally suited for locking down nuts and bolts. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6002 Joker Double Open end wrenches, 20 x 22 x 260.5 mm kts: double open-end spanner, 20 x 22 x 260.5 mm kpn: 6002 Joker Double kpn_dash: kpn_clear: 6002JokerDouble bkpn: WERA 6002 Joker Double bkpn_clear: WERA 6002JokerDouble c_path: Home / Tools / Hand tools / Keys / Keys / Open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera open-ended spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020260001 sr_ns: WERA05020260001
r: 03176900 p: 32.396 pid: 31944 b: WERA q: 0 st: lt: 15 ean: 4013288218889 sr: WERA 05020506001 sr_no_br: 05020506001 sr_no_br_cl: 05020506001 sr_cl: WERA05020506001 sr_dash: sold: 226.772 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 32 mm Length 460 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (32 x 360 mm) - 05020506001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 32 x 360 mm kts: ring spanner (32 x 360 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020506001 sr_ns: WERA05020506001
r: 03166861 p: 53.553 pid: 33846 b: WERA q: 1 st: 1 lt: 1 ean: 4013288212795 sr: WERA 05020263001 sr_no_br: 05020263001 sr_no_br_cl: 05020263001 sr_cl: WERA05020263001 sr_dash: sold: 214.212 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 1 27 mm Length 305 mm Non-sparking No VDE approved No With safety colour code 1000V Surface treatment Chrome plated Width across flats 2 32 mm Product Range Wera Joker n: WERA 6002 Joker Double double open-end spanner, 27 x 32 x 305 mm - 05020263001 cn: OPEN-ENDED SPANNER cn2: OPEN-ENDED SPANNER cn_clear: OPENENDEDSPANNER d: Product description High-quality, metric double spanner from Wera: Everything a wrench can do and so much more. Faster, better, more beautiful. A real Joker! The new generation of double open-ended spanners. For hexagon screw heads and bolts. With holding function by a metal plate in the open end, which reduces the risk of losing screws and sockets. With its extra hard teeth the exchangeable metal plate in the open end secures screws and sockets and reduces the risk of slipping. The integrated end stop can prevent the screw head from slipping down and allows application of high torques. The double hexagon geometry ensures a positive connection with the screw or bolt and thus reduces the risk of slipping. A return angle of only 30° avoids time-consuming rotating of the wrench whilst screwdriving. The special forge geometry allows a high torque transmission and high bending stiffness. Made of high-performance chromium molybdenum steel with nickel-chromium coating for high corrosion protection. With tool finder Take it easy: colour coding by size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping The double-hex geometry reduces the risk of slipping Return angle of only 30° With Take it easy tool finder: colour coding by size Application Hexagon bolts and nuts Design Double open-end wrench Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. When we began to think about open-ended wrenches, we asked ourselves: why does the wrench always have to be flipped over; why does it have an offset design; why does it slip off injuring fingers? The new design of the open end resulted in a real "Joker" that works even when all other trumps have been played. The Joker double open-ended wrench is ideally suited for locking down nuts and bolts. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6002 Joker Double Open end wrenches, 27 x 32 x 305 mm kts: double open-end spanner, 27 x 32 x 305 mm kpn: 6002 Joker Double kpn_dash: kpn_clear: 6002JokerDouble bkpn: WERA 6002 Joker Double bkpn_clear: WERA 6002JokerDouble c_path: Home / Tools / Hand tools / Keys / Keys / Open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera open-ended spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020263001 sr_ns: WERA05020263001
r: 03230168 p: 14.71 pid: 70568 b: WERA q: 0 st: lt: 7 ean: 4013288222794 sr: WERA 05136405001 sr_no_br: 05136405001 sr_no_br_cl: 05136405001 sr_cl: WERA05136405001 sr_dash: sold: 205.94 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Accessory/Part type Roll-up pouch For Joker 6003 (15 pieces) Product Range Wera Joker n: WERA 9465 roll case for 6003 Joker 15, empty, 265 x 120 mm - 05136405001 cn: ACCESSORY/PART WRENCH cn2: ACCESSORY/PART WRENCH cn_clear: ACCESSORYPARTWRENCH d: Product description Robust material and low weight ensure optimal transport Strong hook and loop fastener system to prevent unintentional opening and therefore loss of the tool Compact design for space-saving storage The pouch can be hung up even while open using the hanging loop Compatible with Wera 2go Features and benefits The material used is distinguished by its high level of robustness. The mesh pouches hold the tools securely and reliably. The size marking can be seen through the mesh material. The textile box features a fleece zone at the back. Using the provided self-adhesive hook and loop fastener strips, the textile box can be attached to the Wera 2go components. Or to the wall, shelf or workshop trolley. ds: dsc: Scope of delivery 9465 Roll pouch 6003 Joker 15, empty, 265 x 120 mm kts: roll case for 6003 Joker 15, empty, 265 x 120 mm kpn: 9465 kpn_dash: kpn_clear: 9465 bkpn: WERA 9465 bkpn_clear: WERA 9465 c_path: Home / Tools / Hand tools / Keys / Accessories and spare parts / Accessory/part wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera accessories and spare parts / Wera accessory/part wrench | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05136405001 sr_ns: WERA05136405001
r: 03176901 p: 28.595 pid: 31948 b: WERA q: 0 st: lt: 7 ean: 4013288218872 sr: WERA 05020505001 sr_no_br: 05020505001 sr_no_br_cl: 05020505001 sr_cl: WERA05020505001 sr_dash: sold: 200.165 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 36 mm Length 330 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (30 x 330 mm) - 05020505001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 30 x 330 mm kts: ring spanner (30 x 330 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020505001 sr_ns: WERA05020505001
