r: 02818172 p: 6.446 pid: 43838 b: WERA q: 0 st: lt: 13 ean: 4013288155481 sr: WERA 05059661001 sr_no_br: 05059661001 sr_no_br_cl: 05059661001 sr_cl: WERA05059661001 sr_dash: sold: 32.23 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 89 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 3/32" Drive profile size (bit) 3/32" Product Range Wera Hex-Plus n: WERA 840/4 Z Hex-Plus hexagon bit, 3/32" x 89 mm - 05059661001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z bits, 3/32" x 89 mm kts: hexagon bit, 3/32" x 89 mm kpn: 840/4 Z Hex-Plus kpn_dash: 840/4 Z Hex kpn_clear: 8404ZHexPlus bkpn: WERA 840/4 Z Hex-Plus bkpn_clear: WERA 8404ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05059661001 sr_ns: WERA05059661001
r: 41071073 p: 6.446 pid: 71777 b: WERA q: 1 st: 1 lt: 1 ean: 4013288017734 sr: WERA 05017005001 sr_no_br: 05017005001 sr_no_br_cl: 05017005001 sr_cl: WERA05017005001 sr_dash: sold: 32.23 p_range: none type: standard act: 1 avo: 1 av: Drive size PH1 Blade length 80 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Phillips n: WERA 917 SPH Phillips screwdriver, PH 1 x 80 mm - 05017005001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera chiseldriver for screwdriving, chiseling, mortising and slackening stuck screws. With multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The pound-thru hexagonal blade made of premium bit material ensures power transmission without loss even at hammer blows. Tough tempered material to prevent the blade from splintering or breaking. With integrated impact cap to increase service life and reduce risk of splintering. Higher torques can be transmitted with open-end or ring spanners using the integrated hexagon bolster. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. With hexagon anti-roll protection to avoid bits from rolling away annoyingly in the workplace. Chiseldriver for fastening, chiselling and loosening Hexagonal blade extending through the handle Multi-component Kraftform handle for fast and ergonomic screwdriving Impact cap and bolster for the transfer of higher torque The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Phillips screws Blade Hexagonal throughout with impact cap, hexagonal bolster for sizes 1 - 4 Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, size 4/200: Kraftform with non-roll feature, single-component Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 917 SPH Screwdriver for Phillips screws, PH 1 x 80 mm kts: Phillips screwdriver, PH 1 x 80 mm kpn: 917 SPH kpn_dash: kpn_clear: 917SPH bkpn: WERA 917 SPH bkpn_clear: WERA 917SPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05017005001 sr_ns: WERA05017005001
r: 02307159 p: 6.446 pid: 44227 b: WERA q: 1 st: 1 lt: 1 ean: 4013288100702 sr: WERA 05028051001 sr_no_br: 05028051001 sr_no_br_cl: 05028051001 sr_cl: WERA05028051001 sr_dash: sold: 32.23 p_range: none type: standard act: 1 avo: 1 av: Drive size T15 Blade length 80 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx n: WERA 367 TORX HF screwdriver with holding function, TX 15 x 80 mm - 05028051001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. With holding function: The clamping force resulting from the seating stress between the tip and the screw profile keeps the screws securely on the tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Handles marked for easy identification and sorting of tools. Screwdriver for recessed TORX® screws Holding function for TORX® screws Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Application TORX® socket screws Blade Round Design Holding function for TORX® screws made according to Acument Intellectual Properties specifications, chrome-plated Handle Kraftform with non-roll feature, multi-component Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. ds: dsc: Scope of delivery 367 TORX® HF Screwdriver with holding function for TORX® screws, TX 15 x 80 mm kts: screwdriver with holding function, TX 15 x 80 mm kpn: 367 TORX HF kpn_dash: kpn_clear: 367TORXHF bkpn: WERA 367 TORX HF bkpn_clear: WERA 367TORXHF c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05028051001 sr_ns: WERA05028051001
r: 08085380 p: 6.44 pid: 70143 b: WERA q: 0 st: lt: 8 ean: 4013288222398 sr: WERA 05018140001 sr_no_br: 05018140001 sr_no_br_cl: 05018140001 sr_cl: WERA05018140001 sr_dash: sold: 32.2 p_range: none type: standard act: 1 avo: 1 av: Length 70 mm Drive profile size (bit) 4 mm Blade thickness 0,8 mm Type of drive profile (bit) Slotted Connection size (bit) 1/4" VDE approved No Bit tip Slotted 4 mm n: WERA 800 S slotted bit for impact screwdriver, 0.8 x 4 x 70 mm - 05018140001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Extra tough bit for slotted screws. This prevents the bit from breaking prematurely and extends its service life. Suitable for use with Wera impact screwdriver 921. With 1/4" hexagonal drive. For slotted screws Extra tough for long durability 1/4" hexagon drive For use with Wera impact screwdriver 921 Application Slotted screws; for use with impact screwdriver 921 Drive 1/4" hexagonal Design Extra tough Features and benefits The 921 impact screwdriver combines the advantages of manual impact wrenches, compact tools and screwdrivers with pound-thru blade. The Wera impact screwdriver bits are particularly suitable for use with the Wera 921 impact screwdriver. The extra tough bits stand out with their particularly long service life. Premature breakage is prevented. ds: dsc: Scope of delivery 800 S Slotted bits for impact screwdrivers, 0.8 x 4 x 70 mm kts: slotted bit for impact screwdriver, 0.8 x 4 x 70 mm kpn: 800 S kpn_dash: kpn_clear: 800S bkpn: WERA 800 S bkpn_clear: WERA 800S c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05018140001 sr_ns: WERA05018140001
r: 08108045 p: 10.71 pid: 159635 b: WERA q: 0 st: lt: 8 ean: 4013288228727 sr: WERA 05006530001 sr_no_br: 05006530001 sr_no_br_cl: 05006530001 sr_cl: WERA05006530001 sr_dash: sold: 32.13 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness Type of drive profile (bit) Pozidriv/Slotted Connection size (bit) 9 mm Connection profile (bit) Hexagonal VDE approved Yes Bit tip SL/PZ1 Drive profile size (bit) 1 Product Range Wera Kraftform Kompakt n: WERA 05006530001 Kraftform Kompakt VDE inserts for PlusMinus screws slotted/ Pozidriv 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE blade for the Kraftform Kompakt handle/interchangeable blade system. Combination profile slotted and Pozidriv, especially for use with clips, fuse boxes, switches, relays. Lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Reduced blade diameter with integrated protective insulation, low-lying screw and spring elements can be easily reached and operated. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. With Take it easy tool finder: colour coding by profile and laser-engraved size indication. The hexagon anti-roll protection avoids blades from rolling away unintentionally. Kraftform Kompakt VDE blade for PlusMinus screws slotted/Pozidriv Reduced shaft diameter and integrated insulation protection Insulated, individually tested as per IEC 60900 9 mm hex drive with with entry chamfer Black Point tip for enhanced corrosion protection and an exact fit Application PlusMinus screws slotted/Pozidriv Blade Reduced blade diameter with integrated protective insulation, low lying PlusMinus screws can be easily reached and operated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Burnished, Black Point tip, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Testing the tool for dielectric strength at 10,000 volt gives the user the peace of mind that their tool has been tested for its most important property, insulation. Wera VDE tools are subjected to this test piece by piece which guarantees safe working at up to 1,000 volt. The 157 mm length blades are suitable for Wera Kraftform bitholding screwdrivers 7400 VDE, 837 i RA, 827 T i and 817 VDE. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE 65 iS PZ/S Take it easy, # 1 x 157 mm kts: Kraftform Kompakt VDE inserts for PlusMinus screws slotted/ Pozidriv 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006530001 kpn_dash: kpn_clear: 05006530001 bkpn: WERA 05006530001 bkpn_clear: WERA 05006530001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006530001 sr_ns: WERA05006530001
r: 02814940 p: 32.066 pid: 18972 b: WERA q: 0 st: lt: 12 ean: 4013288095688 sr: WERA 05056374001 sr_no_br: 05056374001 sr_no_br_cl: 05056374001 sr_cl: WERA05056374001 sr_dash: sold: 32.066 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Mixed; Phillips; Pozidriv; Slotted; Torx; Hexagon Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 10 Product Range Wera Bit-Check n: WERA Bit-Check 10 BiTorsion 1 screwdriver bit set 10-piece - 05056374001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Robust Bit-Check by Wera. Bit-Checks provide a quick overview of the tools available. Bits not needed are simply reinserted into the set and do not get lost. Simple transportation e.g. in the shirt pocket. Tough viscous bits for universal use. BiTorsion bits with Torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. This provides the best possible durability together with the matching holder. Comes with Rapidaptor technology, which allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward - for rapid bit change with just one hand. For the take-up of bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3. Can be inserted in the power screwdriver or for use in the chuck of the electric drill. Upright positionable, multi-component Bit-Check Rapidaptor holder for rapid bit change BiTorsion bits for long service life Tough viscous bits for universal use Take it easy tool finder: colour coding according to profile and size 1 BiTorsion bit holder Rapidaptor with quick-release chuck, 9 BiTorsion bits for long service life, tough, for universal use. The Take it easy Bit-Checks have bits with a sleeve which - from its colour and size designation - make it simple to access the right bit quickly. Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. With softer BiTorsion zone to prevent the bit tip from twisting at high loads. This significantly increases product life. Tough design for universal use. BiTorsion holders from Wera have a torsion spring design that absorbs smaller peak loads during screwdriving. The combined use with BiTorsion bits with their torsion zone distinctly extends the service life of the tool. Conveniently, BiTorsion holders from Wera can also be used with conventional bits. Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). The BiTorsion holder and the BiTorsion bit can, of course, be used independently of one another. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. ds: dsc: Scope of delivery Bit-Check 10 BiTorsion 1, 10 pieces 1x 897/4 R Rapidaptor BiTorsion Universal Bit Holder: 1/4" x 75 mm 3x 851/1 BTZ bits: PH 1x25 mm, PH 2x25 mm, PH 3x25 mm 3x 855/1 BTZ bits: PZ 1x25 mm, PZ 2x25 mm, PZ 3x25 mm 3x 800/1 BTZ bits: 0.8x5.5x25 mm, 1x5.5x25 mm, 1.2x6.5x25 mm kts: screwdriver bit set 10-piece kpn: Bit-Check 10 BiTorsion 1 kpn_dash: Bit kpn_clear: BitCheck10BiTorsion1 bkpn: WERA Bit-Check 10 BiTorsion 1 bkpn_clear: WERA BitCheck10BiTorsion1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05056374001 sr_ns: WERA05056374001
r: 02686810 p: 1.6 pid: 44629 b: WERA q: 0 st: lt: 8 ean: 4013288018663 sr: WERA 05021610001 sr_no_br: 05021610001 sr_no_br_cl: 05021610001 sr_cl: WERA05021610001 sr_dash: sold: 32 p_range: none type: standard act: 1 avo: 1 av: Width across flats 2,5 mm Non-sparking No Overall length 112 mm Blade length 112 mm Surface treatment Chrome plated Short arm length 18 mm With safety colour code 1000V No VDE approved No Handle type With handle No With ball head No n: WERA 950 L socket spanner metric chrome plated 2.5 x 112 mm - 05021610001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description High quality L-keys for hexagonal socket screws. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The precise chrome-plated design ensures high corrosion protection; with extra-long arm. L-keys for hexagonal socket screws Hexagonal socket wrench with Hex-Plus advantage for a longer screw life High corrosion protection thanks to chrome-plating Extra-long arm Metric Application Hexagon socket screws Design Chrome-plated Tip Hex-Plus Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. Chrome-plated hexagon L-keys for outstanding surface protection and long service life. High corrosion protection. ds: dsc: Scope of delivery 950 L L-key, metric, chrome-plated, 2.5 x 112 mm kts: socket spanner metric chrome plated 2.5 x 112 mm kpn: 950 L kpn_dash: kpn_clear: 950L bkpn: WERA 950 L bkpn_clear: WERA 950L c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05021610001 sr_ns: WERA05021610001
r: 02059342 p: 10.66 pid: 42134 b: WERA q: 0 st: lt: 11 ean: 4013288031426 sr: WERA 05060031001 sr_no_br: 05060031001 sr_no_br_cl: 05060031001 sr_cl: WERA05060031001 sr_dash: sold: 31.98 p_range: none type: standard act: 1 avo: 1 av: Length 127 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ1 n: WERA 855/4 Z PZ bit Pozidriv, PZ 1 x 127 mm - 05060031001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for Pozidriv* screws. Tough, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. * Pozidriv = registered trademark of the company European Industrial Service Ltd. Suitable for Pozidriv screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 855/4 Z bits, PZ 1 x 127 mm kts: bit Pozidriv, PZ 1 x 127 mm kpn: 855/4 Z PZ kpn_dash: kpn_clear: 8554ZPZ bkpn: WERA 855/4 Z PZ bkpn_clear: WERA 8554ZPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05060031001 sr_ns: WERA05060031001
r: 02680184 p: 10.63 pid: 45913 b: WERA q: 0 st: lt: 8 ean: 4013288032263 sr: WERA 05118050001 sr_no_br: 05118050001 sr_no_br_cl: 05118050001 sr_cl: WERA05118050001 sr_dash: sold: 31.89 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size TT10 Blade length 60 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Tamper Resistant Product Range Wera Kraftform n: WERA 2067 TORX BO Micro Kraftform screwdriver, TX 10 x 60 mm - 05118050001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Wera Micro screwdriver for precision mechanical work. Suitable for TORX® BO safety screw connections: TORX® BO screws have a protruding pin in their drive profile. This prevents any unauthorised loosening since the "normal" hex tools cannot move these screws. Only special TORX® BO tools have a bore hole which can slip over the pin. Rapid twisting is possible by fixing the hand on the twist cap and using the fast-turning zone just below it. This makes time-consuming grip adjustments unnecessary. Power zone with integrated soft zones ensure the transfer of higher tightening and loosening torque. Precision zone for the right angle for adjustment work. The Wera Black Point tip offers high corrosion protection and an exact fit. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. Kraftform Micro screwdriver for recessed TORX® screws with safety pin Multi-component Kraftform Micro handle for fast and ergonomic screwdriving The Wera Black Point tip offers an exact fit and optimum corrosion protection For TORX® socket screws with safety pin Take it easy tool finder: colour coding according to profile and size Application TORX® socket screws with safety pin (BO = with bore hole) Blade Round Design Bore hole in TORX® section, chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (green = TORX®) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Multi-component screwdriver handle for ergonomic working. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Indispensable for many users, including electronics technicians, opticians, precision engineers, jewellers, EDP hardware fitters and model-makers ds: dsc: Scope of delivery 2067 TORX® BO Screwdriver for tamper-proof TORX® screws for electronic applications, TX 10 x 60 mm kts: Kraftform screwdriver, TX 10 x 60 mm kpn: 2067 TORX BO Micro kpn_dash: kpn_clear: 2067TORXBOMicro bkpn: WERA 2067 TORX BO Micro bkpn_clear: WERA 2067TORXBOMicro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118050001 sr_ns: WERA05118050001
r: 02828911 p: 15.867 pid: 44469 b: WERA q: 0 st: lt: 15 ean: 4013288167354 sr: WERA 05073280001 sr_no_br: 05073280001 sr_no_br_cl: 05073280001 sr_cl: WERA05073280001 sr_dash: sold: 31.734 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 5/16" Overall length 144 mm Product Range Wera Joker n: WERA 6000 Joker Imperial socket and ring spanner, inch, 5/16" x 144 mm - 05073280001 cn: RATCHET COMBINATION SPANNER cn2: RATCHET COMBINATION SPANNER cn_clear: RATCHETCOMBINATIONSPANNER d: Product description High quality, imperial, combination ratchet wrench by Wera. Everything that a wrench has to be able to do. And a whole lot more. Faster, better, stylish. Yes, a real Joker. The new generation of combination ratchet wrenches. Suitable for hexagon socket screws, bolts or nuts. Comes with holding function, thanks to the metal plate in the jaw, which reduces the risk of dropping nuts and bolts. The replaceable metal plate in the jaw secures nuts and bolts with its extra hard teeth and reduces the danger of slipping. The integrated limit stop prevents any slipping around the bolt head and allows higher torque to be applied. The double-hex geometry makes for a positive connection with nuts or bolts and reduces the risk of slipping. A return angle of only 30° at the open end prevents any time consuming flipping of the wrench. The ratchet mechanism at the ring end, with an exceptional, fine-tooth mechanism - 80 teeth in all - enables flexibility even in very confined working spaces. The specially forged geometry ensures high torque transfer and strength. The ratchet is manufactured out of high performance chrome molybdenum steel with nickel-chrome coating for high corrosion protection. Take it easy Tool Finder with colour coding according to sizes. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping The double-hex geometry reduces the risk of slipping Return angle of only 30° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench Features and benefits When we began to think about open-ended wrenches, we asked ourselves: why does the wrench always have to be flipped over; why does it have an offset design; why does it slip off injuring fingers? The new design of the open end resulted in a real "Joker" that works even when all other trumps have been played. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6000 Joker Ratcheting combination wrenches, Imperial, 5/16" x 144 mm kts: socket and ring spanner, inch, 5/16" x 144 mm kpn: 6000 Joker Imperial kpn_dash: kpn_clear: 6000JokerImperial bkpn: WERA 6000 Joker Imperial bkpn_clear: WERA 6000JokerImperial c_path: Home / Tools / Hand tools / Keys / Keys / Ratchet combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratchet combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05073280001 sr_ns: WERA05073280001
r: 03229209 p: 7.933 pid: 70060 b: WERA q: 0 st: lt: 8 ean: 4013288188052 sr: WERA 05057760001 sr_no_br: 05057760001 sr_no_br_cl: 05057760001 sr_cl: WERA05057760001 sr_dash: sold: 31.732 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ2 Quantity per box 20 n: WERA Bit-Box 20 PZ Bit-Box 20 PZ, PZ 2 x 25 mm (20 pcs) - 05057760001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for Pozidriv screws in a practical Bit-Box. 1/4" hex, suitable for holders as per DIN ISO 1173-D 6.3. Suitable for Pozidriv screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) In practical Bit-Box for simple removal Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits The slide switch allows a simple and gradual removal and reinsertion of the bits. The transparent reverse side means that it is easy to know how many bits are still in the box. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery Bit-Box 20 PZ, PZ 2 x 25 mm, 20 pieces 20x 855/1 Z bits: PZ 2 x 25 mm kts: Bit-Box 20 PZ, PZ 2 x 25 mm (20 pcs) kpn: Bit-Box 20 PZ kpn_dash: Bit kpn_clear: BitBox20PZ bkpn: WERA Bit-Box 20 PZ bkpn_clear: WERA BitBox20PZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05057760001 sr_ns: WERA05057760001
r: 03057553 p: 7.933 pid: 32813 b: WERA q: 0 st: lt: 12 ean: 4013288210593 sr: WERA 05004553001 sr_no_br: 05004553001 sr_no_br_cl: 05004553001 sr_cl: WERA05004553001 sr_dash: sold: 31.732 p_range: none type: standard act: 1 avo: 1 av: Socket size 13 mm Connection size 1/2" Connection profile Internal square Length 83 mm VDE approved No With safety colour code 1000V Non-sparking No Magnetic No Type of drive profile (socket) Hexagonal n: WERA 8790 HMC Deep hand and machine cap with 1/2" drive 13 x 83 mm - 05004553001 cn: HAND SOCKET cn2: HAND SOCKET cn_clear: HANDSOCKET d: Product description Long 1/2" hand and machine socket (ISO 2725 part 3) with ball intercept ring; for external hexagonal bolts and sockets. For use in manual and machine operation (non-impact), even with low-lying screwdriving and protruding threaded rods. With Take it easy tool finder with colour coding by size - for easy and fast location of the required tool. Easy to grasp even with oily hands. The hexagon profile allows the transmission of high forces and puts less strain on the edges of bolts or screw heads than a double hexagon profile. Fine-toothed ratchets also make the use of a double hexagon profile superfluous, even in confined spaces, thanks to their small return angle. Long sockets for low-lying screwdriving, often even with protruding threaded rods in small spaces Hexagonal profile enables precise bolting with high power transmission and preserves the profile With Take it easy tool finder: colour coding by size Knurling at lower end to enable easy gripping when used in manual applications For manual and machine operation (non-impact), ball intercept ring Application Hexagon headed bolts, screws and nuts Design Manual and (non-impact) machine applications, ball intercept ring, long design for low-lying screwdriving and protruding threaded rods; with hexagonal profile; knurls at base for precision handling in manual operations, chrome vanadium, matt chrome-plated finish. Take it easy tool finder: Colour coding to enable the desired socket to be easily located. Features and benefits Long design Thanks to the long design of the sockets, even couplings in tight spaces can be reached. Screwdriving at protruding thread rods can also be possible. The hexagon profile offers the transmission of high forces and loads the edges of the bolt or the screw head less than a double hexagon profile. Fine-toothed ratchets also make use of a double hexagon profile superfluous, even in confined spaces, thanks to their small return angle. Knurling on lower end for more grip when used manually. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 8790 HMC Deep socket with 1/2" drive, 13 x 83 mm kts: hand and machine cap with 1/2" drive 13 x 83 mm kpn: 8790 HMC Deep kpn_dash: kpn_clear: 8790HMCDeep bkpn: WERA 8790 HMC Deep bkpn_clear: WERA 8790HMCDeep c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Hand socket | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera hand socket sr_no_br_cl_ns: 05004553001 sr_ns: WERA05004553001
r: 02833941 p: 7.933 pid: 41908 b: WERA q: 0 st: lt: 12 ean: 4013288094773 sr: WERA 05024403001 sr_no_br: 05024403001 sr_no_br_cl: 05024403001 sr_cl: WERA05024403001 sr_dash: sold: 31.732 p_range: none type: standard act: 1 avo: 1 av: Drive size T27 Blade length 125 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx n: WERA 977 TORX screwdriver, TX 27 x 125 mm - 05024403001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera Chiseldriver for fastening, chiselling and loosening seized screws. Multi-component Kraftform handle for fast and low-fatigue working. A hexagon blade out of high quality bit material that extends right through the blade ensures full transfer of force, even when struck with a hammer. Ductile tempered material to prevent the blade from splintering or breaking. Comes with an impact cap for durability and reduced risk of splintering. More torque can be transferred with the help of an open-end or ring spanner applied to the integrated hexagonal bolster. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Chiseldriver for fastening, chiselling and loosening Hexagonal blade extending through the handle Handle markings simplify finding and sorting of tools Impact cap and bolster for the transfer of higher torque The Wera Black Point tip offers an exact fit and optimum corrosion protection Application TORX® socket screws Blade Hexagonal throughout with impact cap, hexagonal bolster Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 977 Screwdriver for TORX® screws, TX 27 x 125 mm kts: screwdriver, TX 27 x 125 mm kpn: 977 TORX kpn_dash: kpn_clear: 977TORX bkpn: WERA 977 TORX bkpn_clear: WERA 977TORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05024403001 sr_ns: WERA05024403001
r: 87990629 p: 7.933 pid: 75481 b: WERA q: 0 st: lt: 12 ean: 4013288017239 sr: WERA 05052575001 sr_no_br: 05052575001 sr_no_br_cl: 05052575001 sr_cl: WERA05052575001 sr_dash: sold: 31.732 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Connection size (machine) 1/4" Connection type (machine) External hexagon With lock No Magnetic No Length 57 mm n: WERA 890/4/1 universal bit holder, 1/4" x 57 mm - 05052575001 cn: BIT HOLDER cn2: BIT HOLDER cn_clear: BITHOLDER d: Product description Universal holder for the take-up of bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3. The retaining ring ensures an optimum fit of the tool in the holder. 1/4" hexagonal, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3. Universal holder for the take-up of bits with 1/4" hexagon head drive The retaining ring ensures a secure fit of the tool in the holder 1/4" hexagon drive (Wera connecting series 1) Application Suitable for 1/4" DIN ISO 1173-C 6,3 hexagon insert bits and Wera Series 1 Design With retaining ring Drive 1/4" hexagon, suitable for power tools with DIN ISO 1173-F 6,3 receiver Features and benefits Proven holder design, optimal fitting of the tool in the holder. Particularly robust for series applications. ds: dsc: Scope of delivery 890/4/1 Universal Bit Holder, 1/4" x 57 mm kts: universal bit holder, 1/4" x 57 mm kpn: 890/4/1 kpn_dash: kpn_clear: 89041 bkpn: WERA 890/4/1 bkpn_clear: WERA 89041 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Bit holder | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera bit holder sr_no_br_cl_ns: 05052575001 sr_ns: WERA05052575001
r: 02801824 p: 3.17 pid: 44224 b: WERA q: 0 st: lt: 12 ean: 4013288034281 sr: WERA 05056712001 sr_no_br: 05056712001 sr_no_br_cl: 05056712001 sr_cl: WERA05056712001 sr_dash: sold: 31.7 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ2 n: WERA 855/1 BTH PZ bit Pozidriv, PZ 2 x 25 mm - 05056712001 cn: BIT cn2: BIT cn_clear: BIT d: Product description BiTorsion bits for Pozidriv* screws with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Best possible service life with the matching holder. Extra-hard design. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. * Pozidriv = registered trademark of the company European Industrial Service Ltd. Suitable for Pozidriv screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Particularly hard for semi-hard materials 1/4" hexagon drive (Wera connecting series 1) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design BiTorsion for long service life, extra-hard. Take it easy tool finder: Output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located. Features and benefits BTH-Bits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 855/1 BTH bits, PZ 2 x 25 mm kts: bit Pozidriv, PZ 2 x 25 mm kpn: 855/1 BTH PZ kpn_dash: kpn_clear: 8551BTHPZ bkpn: WERA 855/1 BTH PZ bkpn_clear: WERA 8551BTHPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056712001 sr_ns: WERA05056712001
r: 02815512 p: 1.57 pid: 44847 b: WERA q: 0 st: lt: 8 ean: 4013288010940 sr: WERA 05072057001 sr_no_br: 05072057001 sr_no_br_cl: 05072057001 sr_cl: WERA05072057001 sr_dash: sold: 31.4 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Blade thickness 0,8 mm Type of drive profile (bit) Slotted Connection size (bit) 1/4" VDE approved No Bit tip Slotted 5,5 mm Drive profile size (bit) 5,5 mm n: WERA 800/1 Z slotted screw bit, 0.8 x 5.5 x 25 mm - 05072057001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough viscous Wera bits for slotted screws and universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For slotted screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Slotted screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 800/1 Z bits, 0.8 x 5.5 x 25 mm kts: slotted screw bit, 0.8 x 5.5 x 25 mm kpn: 800/1 Z kpn_dash: kpn_clear: 8001Z bkpn: WERA 800/1 Z bkpn_clear: WERA 8001Z c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05072057001 sr_ns: WERA05072057001
r: 02815510 p: 1.57 pid: 44237 b: WERA q: 0 st: lt: 12 ean: 4013288010957 sr: WERA 05072059001 sr_no_br: 05072059001 sr_no_br_cl: 05072059001 sr_cl: WERA05072059001 sr_dash: sold: 31.4 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Blade thickness 1 mm Type of drive profile (bit) Slotted Connection size (bit) 1/4" VDE approved No Bit tip Slotted 5,5 mm Drive profile size (bit) 5,5 mm n: WERA 800/1 Z slotted screw bit, 1 x 5.5 x 25 mm - 05072059001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough viscous Wera bits for slotted screws and universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For slotted screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Slotted screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 800/1 Z bits, 1 x 5.5 x 25 mm kts: slotted screw bit, 1 x 5.5 x 25 mm kpn: 800/1 Z kpn_dash: kpn_clear: 8001Z bkpn: WERA 800/1 Z bkpn_clear: WERA 8001Z c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05072059001 sr_ns: WERA05072059001
r: 03229829 p: 31.363 pid: 70118 b: WERA q: 0 st: lt: 8 ean: 4013288196132 sr: WERA 05078690001 sr_no_br: 05078690001 sr_no_br_cl: 05078690001 sr_cl: WERA05078690001 sr_dash: sold: 31.363 p_range: none type: standard act: 1 avo: 1 av: Ring spanner type Single ring spanner Drive profile size 13 mm Type of drive profile Twelve-point Connection size 14 x 18 mm Connection profile Outer rectangle n: WERA 7781 insert-ring spanner 14x18 mm, 13 x 62 mm - 05078690001 cn: INTERCHANGEABLE RING SPANNER cn2: INTERCHANGEABLE RING SPANNER cn_clear: INTERCHANGEABLERINGSPANNER d: Product description Ring spanner insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 14x18 mm holder. Square head insert tool 14x18 mm For torque wrenches from the Click-Torque X series with 14x18 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 14x18 mm; for torque wrenches of the Click-Torque X series with 14x18 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 14x18 mm mounting. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Safe working and rapid tool change thanks to the pin lock of the insert tools. ds: dsc: Scope of delivery 7781 Ring spanner insert, 14x18 mm, 14x18 x 13 x 61.6 mm kts: insert-ring spanner 14x18 mm, 13 x 62 mm kpn: 7781 kpn_dash: kpn_clear: 7781 bkpn: WERA 7781 bkpn_clear: WERA 7781 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable ring spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable ring spanner sr_no_br_cl_ns: 05078690001 sr_ns: WERA05078690001
r: 41071095 p: 31.363 pid: 71788 b: WERA q: 0 st: lt: 15 ean: 4013288093332 sr: WERA 05027931001 sr_no_br: 05027931001 sr_no_br_cl: 05027931001 sr_cl: WERA05027931001 sr_dash: sold: 31.363 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 0,9 Nm Drive size T7 Drive type Torx ESD No VDE approved No With safety colour code 1000V Adjustable torque range 0,9 Nm Max. tightening torque 0,9 Nm n: WERA 300 TX torque indicator TORX, TX 7 x 0.9 Nm - 05027931001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver with fixed torque for recessed TORX® screws. Tamperproof and with a slim hex blade. Unlimited torque for loosening seized screws. Multi-component Kraftform handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Torque-indicator with pre-set and tamperproof torque value Distinct audible and perceivable excess load signal when the pre-set torque value is reached Non-adjustable and tamperproof Unlimited torque for loosening seized screws Multi-component Kraftform handle for fast and ergonomic screwdriving Application TORX® socket screws Pre-set torque 0.6 Nm-3.0 Nm (0.4 ft.lb.-2.2 ft.lb.), fixed pre-sets Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Hexagonal, 4 mm, reduced diameter tip Design Black Point Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque-indicators have been factory pre-set to values recommended by leading carbide tool manufacturers. These tightening values relate specifically to the size of the TORX®, TORX PLUS® or hexagon socket screw. Torque indicators ensure safe and easy loosening of screw connections. Precision : ± 10 % Slim 4 mm hexagon blades to reach screws in difficult-to-access places. Non-adjustable and tamperproof. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Multi-component Kraftform handle with hard and soft zones for fast working speeds and protecting the palm of the hand. ds: dsc: Scope of delivery 300 TX TORX® Torque-indicator, TX 7 x 0.9 Nm kts: torque indicator TORX, TX 7 x 0.9 Nm kpn: 300 TX kpn_dash: kpn_clear: 300TX bkpn: WERA 300 TX bkpn_clear: WERA 300TX c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05027931001 sr_ns: WERA05027931001
r: 41071186 p: 10.413 pid: 71809 b: WERA q: 0 st: lt: 12 ean: 4013288108203 sr: WERA 05009342001 sr_no_br: 05009342001 sr_no_br_cl: 05009342001 sr_cl: WERA05009342001 sr_dash: sold: 31.239 p_range: none type: standard act: 1 avo: 1 av: Drive size PZ2 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Pozidriv n: WERA 355 SK PZ Pozidriv screwdriver, PZ 2 x 100 mm - 05009342001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver by Wera. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer for fast and low-fatigue working. The tips of Wera Lasertip screwdrivers are microscopically roughened by means of laser beams. This rough surface literally bites into the head of the screw. Any unintentional slipping out is therefore a thing of the past. More torque can be transferred with the help of an open-end or ring spanner applied to the hexagonal blade and integrated bolster. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdriver, for cross-recess screws, Pozidriv Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal blade and bolster for higher torque transfer Lasertip tips for more secure fit in the screw head Application Suitable for Pozidriv screws Blade Hexagonal, sizes 1 - 3 with bolster Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (black = Pozidriv) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Hexagonal blade and bolster for higher torque transfer. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 355 SK PZ Screwdriver for Pozidriv screws, PZ 2 x 100 mm kts: Pozidriv screwdriver, PZ 2 x 100 mm kpn: 355 SK PZ kpn_dash: kpn_clear: 355SKPZ bkpn: WERA 355 SK PZ bkpn_clear: WERA 355SKPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05009342001 sr_ns: WERA05009342001
