r: 02823059 p: 6.12 pid: 46805 b: WERA q: 0 st: lt: 16 ean: 4013288034342 sr: WERA 05059912001 sr_no_br: 05059912001 sr_no_br_cl: 05059912001 sr_cl: WERA05059912001 sr_dash: sold: 171.36 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ2 n: WERA 855/4 BTH PZ bit Pozidriv, PZ 2 x 50 mm - 05059912001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Torsion bits for Pozidriv screws with Torsion zone where kinetic energy is diverted from peak loads. This greatly extends the product service life. This provides the best possible durability together with the matching holder. Extra-hard; 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Suitable for Pozidriv screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Particularly hard for semi-hard materials 1/4" hexagon drive (Wera connecting series 4) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design BiTorsion for long service life, extra-hard. Take it easy tool finder: Output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located. Features and benefits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. With BiTorsion zone to cushion peak loads. ds: dsc: Scope of delivery 855/4 BTH bits, PZ 2 x 50 mm kts: bit Pozidriv, PZ 2 x 50 mm kpn: 855/4 BTH PZ kpn_dash: kpn_clear: 8554BTHPZ bkpn: WERA 855/4 BTH PZ bkpn_clear: WERA 8554BTHPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059912001 sr_ns: WERA05059912001
r: 08103768 p: 42.809 pid: 72196 b: WERA q: 0 st: lt: 8 ean: 4013288229366 sr: WERA 05020172001 sr_no_br: 05020172001 sr_no_br_cl: 05020172001 sr_cl: WERA05020172001 sr_dash: sold: 171.236 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 19 - 24 mm Connection size (wrench) 14 x 18 mm Connection type (wrench) External rectangle Product Range Wera Joker n: WERA 7880 Joker XL self-adjusting insert spanner for spanner size 19-24 mm, 14 x 18 mm - 05020172001 cn: INTERCHANGEABLE OPEN-ENDED SPANNER cn2: INTERCHANGEABLE OPEN-ENDED SPANNER cn_clear: INTERCHANGEABLEOPENENDEDSPANNER d: Product description Self-setting insert spanner, for hexagon screw heads and bolts, for torque wrenches from the Click-Torque X and XP series with 14x18 mm mounting. Covers all metric and imperial dimensions in the respective field of application. With its continuous and parallel jaws, the tool replaces several single spanner sizes. The required size is automatically and continuously set when attaching the tool to the hexagon bolt or screw. The integrated lever mechanism securely clamps the hexagon screw or bolt between the jaws, which significantly reduces the risk of slippage or damage. The ratchet feature ensures fast and consistent screwdriving without removing the tool. By using the corner-width rectangular prisms, a return angle of only 30° can be achieved. Square head insert tool 14x18 mm For torque wrenches from the Click-Torque X series with 14x18 mm mounting For hexagon screw heads and bolts with wrench sizes 19.0; 20.0; 21.0; 22.0; 24.0 (metric) For hexagon screw heads and bolts with wrench sizes 3/4"; 25/32"; 13/16"; 7/8"; 15/16" (imperial) Automatically and continuously gripping hexagonal screws and bolts Application Hexagonal screw heads and bolts Drive 14x18 mm; for torque wrenches of the Click-Torque X and XP series with 14x18 mm mounting Design Self-setting spanner with ratchet functionality; open end adjustable in size, parallel smooth jaws; with 30° return angle via the corner-width prisms in the jaw Features and benefits The laser-engraved, abrasion-proof QR code makes it easier to determine the correct torque value depending on the torque wrench and insert tool used. Simply scan with your smartphone or tablet (if available, both QR codes: torque wrench and insert tool). A website opens automatically which recognizes the scanned tools (no app needed!). Then enter the required torque value; the corrected value is determined automatically. No need to use formulas/calculations. For torque wrenches from the Click-Torque X series with 14x18 mm mounting. With its automatically and continuously gripping parallel jaws, the 7880 Joker covers all dimensions within the potential operative range. The tool finds the required size by itself when attaching it to the bolt or screw. The parallel, smooth jaws of the 7880 Joker offer a seating stress and can thus prevent the nut or screw head from rounding, which can occur when power is transmitted over corners. The ratchet feature in the jaw ensures fast and consistent screwdriving without removing the tool. The corner-width rectangular prisms in the jaw allow a return angle of only 30°. Safe working and rapid tool change thanks to the pin lock of the insert tools. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. ds: dsc: Scope of delivery 7880 Joker XL Self-setting insert spanner for wrench sizes 19-24 mm, 14x18mm, 14x18 x 19-24 x 3/4-15/16" x 95 mm kts: self-adjusting insert spanner for spanner size 19-24 mm, 14 x 18 mm kpn: 7880 Joker XL kpn_dash: kpn_clear: 7880JokerXL bkpn: WERA 7880 Joker XL bkpn_clear: WERA 7880JokerXL c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable open-ended spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020172001 sr_ns: WERA05020172001
r: 08131707 p: 171.033 pid: 173497 b: WERA q: 0 st: lt: 8 ean: 4013288233646 sr: WERA 05075693001 sr_no_br: 05075693001 sr_no_br_cl: 05075693001 sr_cl: WERA05075693001 sr_dash: sold: 171.033 p_range: KLIUM_PRODUCT_RANGE_305 type: standard act: 1 avo: 1 av: Min. tightening torque 2,5 Nm Drive profile size 1/4" VDE approved No With safety colour code 1000V ESD No Display Analogue Adjustable torque range 2,5-25 Nm Max. tightening torque 25 Nm Product Range Wera Click-Torque Lock n: WERA Click-Torque Lock A 5 R/L torque spanner, adjustable, Torque Lock function, 1/4" square-through square, clockwise and anticlockwise tightening, 2.5-25 Nm - 05075693001 cn: TORQUE WRENCH cn2: TORQUE WRENCH cn_clear: TORQUEWRENCH d: Product description Adjustable torque wrench for controlled clockwise and counterclockwise torque operation. With 1/4" square head drive. The torque function can be deactivated (Torque Lock function), so that the tool can also be used for loosening. Easy setting and saving of the default value. The audible and tactile clicks on reaching the scale values facilitate the safe setting of the desired torque value. The robust release mechanism guarantees a clearly audible and tactile release signal when the set torque value is reached. Fine-toothed reversible ratchet with 45 teeth. Accuracy of ±4 % as per DIN EN ISO 6789-1:2017-07. For clockwise and counterclockwise operation Torque Lock function: The torque function can be deactivated so that the tool can also be used for loosening screws and bolts With square head insert (including patent-registered socket locking) Extra click: audible and tactile torque setting Torque wrench gives an audible and tactile signal Application For clockwise and counterclockwise torque operation. The torque function can be deactivated (Torque Lock function), so that the tool can also be used for loosening. Precision Accuracy ±4 % of the set value, as per DIN EN ISO 6789-1:2017-07 Design With 1/4" square head drive with socket locking, square head insert to change the tightening direction, 45 teeth; easy setting and saving of the desired torque value, with audible and tactile locking when the scale values are reached (fine scale only in Newton meters), audible and tactile release mechanism when the set torque value is reached Handle Ergonomic 2-component handle Features and benefits The torque function can be deactivated so that the tool can also be used for loosening. With square head insert (including patent-registered socket locking) for controlled clockwise and counterclockwise torque operation. Precision of ±34 % as per DIN EN ISO 6789-1:2017-07. Easy setting and saving of the desired torque value; easy to read on main and fine scales. With audible and tactile locking when the scale values are reached. On reaching the desired torque value, an audible and tactile mechanism is triggered. ds: dsc: Scope of delivery Click-Torque Lock A 5 R/L Torque wrench, adjustable, Torque Lock function, square head insert (1/4"), clockwise/counterclockwise torque operation, 2.5-25 Nm, 1/4" x 2.5-25 Nm kts: torque spanner, adjustable, Torque Lock function, 1/4" square-through square, clockwise and anticlockwise tightening, 2.5-25 Nm kpn: Click-Torque Lock A 5 R/L kpn_dash: Click kpn_clear: ClickTorqueLockA5RL bkpn: WERA Click-Torque Lock A 5 R/L bkpn_clear: WERA ClickTorqueLockA5RL c_path: Home / Tools / Hand tools / Torque tools / Torque wrenches / Torque wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque wrenches / Wera torque wrench | Home / Our brands / Wera / Wera Ranges / Wera click-torque lock sr_no_br_cl_ns: 05075693001 sr_ns: WERA05075693001
r: 02829034 p: 56.983 pid: 42742 b: WERA q: 0 st: lt: 8 ean: 4013288138569 sr: WERA 05072452001 sr_no_br: 05072452001 sr_no_br_cl: 05072452001 sr_cl: WERA05072452001 sr_dash: sold: 170.949 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 40 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T40 Quantity per box 100 n: WERA 867/1 TORX DIY 100 SiS bits, TX 40 x 25 mm (100 pcs) - 05072452001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX® screws. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For recessed TORX® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design For universal use Features and benefits ds: dsc: Scope of delivery 867/1 TORX® DIY 100, TX 40 x 25 mm, 100 pieces 100x 867/1 TORX® bits: TX 40 x 25 mm kts: bits, TX 40 x 25 mm (100 pcs) kpn: 867/1 TORX DIY 100 SiS kpn_dash: kpn_clear: 8671TORXDIY100SiS bkpn: WERA 867/1 TORX DIY 100 SiS bkpn_clear: WERA 8671TORXDIY100SiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05072452001 sr_ns: WERA05072452001
r: 03177021 p: 10.65 pid: 31441 b: WERA q: 0 st: lt: 11 ean: 4013288215222 sr: WERA 05030109001 sr_no_br: 05030109001 sr_no_br_cl: 05030109001 sr_cl: WERA05030109001 sr_dash: sold: 170.4 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size #1 Blade length 40 mm Blade thickness ESD Yes Non-sparking No VDE approved No With safety colour code 1000V Drive type Square Product Range Wera Kraftform n: WERA 1550 PH S ESD Micro Kraftform screwdriver, square 1 x 40 mm - 05030109001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description ESD-safe Micro screwdriver. Dependable protection against electrostatic energy and associated damage. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. The Black Point tip offers optimised corrosion protection and an exact fit. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Multi-component Kraftform Micro handle for fast and ergonomic screwdriving The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Anti-roll feature and rotating cap for rapid twisting Application Phillips-head screws for mobile phones Blade Round Design Nicromatt, Black Point tip Handle Kraftform Micro with anti-roll protection and rotating cap, multi-component. With tool finder Take it easy: colour coding by profile (red = Phillips) and size stamping. Features and benefits The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Multi-component screwdriver handle for ergonomic working. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The fast-turning zone just below the rotating cap allow rapid twisting. This makes time-consuming grip adjustments as with other conventional precision screwdrivers unnecessary. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 1550 PH S ESD Kraftform Micro screwdrivers, # 1 x 40 mm kts: Kraftform screwdriver, square 1 x 40 mm kpn: 1550 PH S ESD Micro kpn_dash: kpn_clear: 1550PHSESDMicro bkpn: WERA 1550 PH S ESD Micro bkpn_clear: WERA 1550PHSESDMicro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05030109001 sr_ns: WERA05030109001
r: 02142118 p: 15.371 pid: 44168 b: WERA q: 0 st: lt: 14 ean: 4013288160287 sr: WERA 05006466001 sr_no_br: 05006466001 sr_no_br_cl: 05006466001 sr_cl: WERA05006466001 sr_dash: sold: 169.081 p_range: none type: standard act: 1 avo: 1 av: Drive size PZ/S 1 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Pozidriv/Slotted n: WERA 165 iS PZ/S VDE insulated screwdriver for PlusMinus screws, reduced-diameter blade, square 2 x 100 mm - 05006466001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera VDE screwdriver with multi-component Kraftform Plus handle for fast and smooth work: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Combination profile slotted and Pozidriv*, especially for use with terminal strips, fuse boxes, switches, relays. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Reduced shaft diameter: combination profile - Pozidriv/slotted Application For PlusMinus screws (Pozidriv/slotted) Blade Reduced blade diameter with integrated protective insulation, allows sunken PlusMinus screws to be accessed and actuated, individually tested as per IEC 60900 Design PlusMinus (Pozidriv/slotted), blade zinc-phosphated Handle Kraftform with non-roll feature, multi-component Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 165 iS PZ/S VDE Insulated screwdriver with reduced blade diameter for PlusMinus screws (Pozidriv/slotted), # 2 x 100 mm kts: VDE insulated screwdriver for PlusMinus screws, reduced-diameter blade, square 2 x 100 mm kpn: 165 iS PZ/S kpn_dash: kpn_clear: 165iSPZS bkpn: WERA 165 iS PZ/S bkpn_clear: WERA 165iSPZS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05006466001 sr_ns: WERA05006466001
r: 41071333 p: 12.066 pid: 71296 b: WERA q: 0 st: lt: 11 ean: 4013288121059 sr: WERA 05003531001 sr_no_br: 05003531001 sr_no_br_cl: 05003531001 sr_cl: WERA05003531001 sr_dash: sold: 168.924 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Connection size 1 1/4" Connection size 2 1/4" Connection type 1 (extension) Outer square Connection type 2 (extension) Internal square Length 150 mm VDE approved No With safety colour code 1000V No Non-sparking No Product Range Wera Zyklop n: WERA 8796 LA Zyklop "Flexible-Lock" extension with free-running sleeve, long, 1/4", 1/4" x 150 mm - 05003531001 cn: EXTENSION cn2: EXTENSION cn_clear: EXTENSION d: Product description Wera Zyklop extension with flexible-lock: when activated the sockets are secured and permanently fixed, any unintentional loss being avoided. When the system is deactivated, the sockets can be quickly attached and exchanged. Equipped with a free-turning sleeve for faster turning of screws and nuts. 1/4" Zyklop "flexible lock" extension with free-turning sleeve, long For 1/4" square sockets with ball lock Flexible lock system for either locking or rapid exchange of the attached tool With free-turning sleeve for rapid tightening and loosening of screws and nuts Chrome vanadium steel, matte chrome-plated Application 1/4" square drive sockets with ball lock Design Flexible-lock system either for permanent interlocking or fast change of accessories, free-turning sleeve for rapid tightening or loosening of screws and nuts, chrome vanadium, brushed chrome-plated finish Features and benefits The extensions from the premium lines are also equipped with the unique "flexible-lock-system". By activating this system, attachments can be fixed to the extension permanently - preventing slipping and any unintentional loss of the attachment. When the system is deactivated, the sockets can be attached as usual and changed in a flash. The free-turning sleeve on the Zyklop Speed and the Zyklop extension effectively accelerates the turning of screws and nuts. ds: dsc: Scope of delivery 8796 LA Zyklop "flexible-lock" extension with free-turning sleeve, long, 1/4", 1/4" x 150 mm kts: Zyklop "Flexible-Lock" extension with free-running sleeve, long, 1/4", 1/4" x 150 mm kpn: 8796 LA kpn_dash: kpn_clear: 8796LA bkpn: WERA 8796 LA bkpn_clear: WERA 8796LA c_path: Home / Tools / Hand tools / Sockets and ratchets / Accessories and spare parts / Extension | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera accessories and spare parts / Wera extension | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003531001 sr_ns: WERA05003531001
r: 02829011 p: 11.239 pid: 42618 b: WERA q: 0 st: lt: 8 ean: 4013288172631 sr: WERA 05671388001 sr_no_br: 05671388001 sr_no_br_cl: 05671388001 sr_cl: WERA05671388001 sr_dash: sold: 168.585 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Accessory/Part type Case For Kraftform Kompakt (18 pieces) Product Range Wera Kraftform Kompakt n: WERA 9457 folding case for Kraftform Kompakt VDE sets with max. 18 parts, empty, 180 x 85 mm - 05671388001 cn: ACCESSORY/PART SCREWING cn2: ACCESSORY/PART SCREWING cn_clear: ACCESSORYPARTSCREWING d: Product description Empty folding pocket for up to 18-part Kraftform Compact VDE sets Robust pouch with strong hook and loop fastener system With 3D product labelling Suitable for docking with the Wera 2go system. Features and benefits ds: dsc: Scope of delivery 9457 Folding pouch for 18-piece Kraftform Kompakt VDE sets, empty, 180 x 85 mm kts: folding case for Kraftform Kompakt VDE sets with max. 18 parts, empty, 180 x 85 mm kpn: 9457 kpn_dash: kpn_clear: 9457 bkpn: WERA 9457 bkpn_clear: WERA 9457 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Accessory/part screwing | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera accessory/part screwing | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05671388001 sr_ns: WERA05671388001
r: 08131749 p: 56.157 pid: 173529 b: WERA q: 2 st: 1 lt: 1 ean: 4013288233295 sr: WERA 05020331001 sr_no_br: 05020331001 sr_no_br_cl: 05020331001 sr_cl: WERA05020331001 sr_dash: sold: 168.471 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 1 12,4 mm Width across flats 2 14 mm Length 239,4 mm Non-sparking No VDE approved No With safety colour code 1000V Product Range Wera Joker n: WERA 6006 Joker M/L self-adjusting double open-end spanner - 05020331001 cn: OPEN-ENDED SPANNER cn2: OPEN-ENDED SPANNER cn_clear: OPENENDEDSPANNER d: Product description Self-setting double spanner for hexagon screw heads and bolts with wrench sizes 13-16 and 16-19 (metric) or 1/2"-5/8" and 5/8"-3/4" and 7/16"-8/16" (imperial). With its continuous and parallel jaws, the tool replaces several single spanner sizes. The required size is automatically and continuously set when attaching the tool to the hexagon bolt or screw. The integrated lever mechanism securely clamps the hexagon screw or bolt between the jaws, which significantly reduces the risk of slippage or damage. The ratchet feature ensures fast and consistent screwdriving without removing the tool. By using the corner-width rectangular prisms, a return angle of only 30° can be achieved. Ratchet feature and corner-width prism make it possible to work even in confined spaces. The adjustable Joker 6006 double spanner with ratchet functionality is the universal screwdriving tool. Self-setting. Gripping. Spanning. Self-setting double spanner For hexagon screw heads and bolts with wrench sizes 13.0; 14.0; 15.0; 16.0; 17.0; 18.0; 19.0 (metric) For hexagon screw heads and bolts with wrench sizes 1/4"; 5/16"; 3/8"; 7/16"; 1/2"; 17/32"; 9/16"; 19/32"; 5/8"; 11/16"; 3/4" (imperial) Automatically and continuously gripping hexagon screws and bolts Lever mechanism upon gripping prevents slipping and damage Application Hexagon screw heads and bolts with wrench sizes 13,0; 14,0; 15,0; 16,0 and 16,0; 17,0; 18,0; 19,0 (metric) resp. 1/2"; 17/32"; 9/16", 19/32"; 5/8" and 5/8"; 11/16"; 3/4" (imperial) Design Self-setting double spanner with ratchet functionality; jaws adjustable in size, parallel smooth jaws; with 30° return angle via the corner-width prisms in the jaw Features and benefits The self-setting Joker 6006 double spanners cover all metric and imperial dimensions in the respective field of application With its automatically and continuously gripping parallel jaws, the Joker 6006 double spanner covers all dimensions within the potential operative range. The tool finds the required size by itself when attaching it to the bolt or screw. The parallel, smooth jaws of the Joker 6006 double spanner offer a seating stress and can thus prevent the nut or screw head from rounding, which can occur when power is transmitted over corners. The ratchet functionality in both jaws of the double spanner ensures fast and consistent screwdriving without removing the tool. Thanks to the corner-width rectangular prisms in both jaws of the double spanner, a return angle of only 30° can be achieved. ds: dsc: Scope of delivery 6006 Joker M/L Self-setting double spanner, 13; 14; 15; 16 x 1/2; 17/32; 9/16; 19/32; 5/8" x 16; 17; 18; 19 x 5/8; 11/16; 3/4" x 239.4 mm kts: self-adjusting double open-end spanner kpn: 6006 Joker M/L kpn_dash: kpn_clear: 6006JokerML bkpn: WERA 6006 Joker M/L bkpn_clear: WERA 6006JokerML c_path: Home / Tools / Hand tools / Keys / Keys / Open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera open-ended spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020331001 sr_ns: WERA05020331001
r: 03177032 p: 14.008 pid: 31449 b: WERA q: 0 st: lt: 16 ean: 4013288219800 sr: WERA 05008877001 sr_no_br: 05008877001 sr_no_br_cl: 05008877001 sr_cl: WERA05008877001 sr_dash: sold: 168.096 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved No ESD No Quantity per set 6 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt Stubby Magazin 4 compact screwdriver with internal bit magazine 6-piece - 05008877001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Particularly small bitholding screwdriver with short bit mounting for hard to reach areas. Includes 6 bits, which are located in a magazine in the handle. With only 65mm total length, the Kraftform Kompakt Stubby is a real mini screwdriving workshop. The strong permanent magnet in the bit mounting ensures secure holding of the bit. The 2-component handle with the practical combination of hard and soft zones allows for a firm grip and precise working. Take it easy tool finder: With size stamping and colour coding by output to find the required bit easily. Short, compact Stubby shape for working in tight installation spaces, with 6 bits in the integrated magazine Ergonomic 2-component Kraftform handle for precise work 1/4" bit mounting with strong permanent magnet Captive and swivelling bit magazine for easy removal and safe storage of bits Take it easy tool finder: colour coding according to profile and size Application Suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and Wera connection series 1 Design Bit holder with strong permanent magnet; bits, tough, for universal use. Handle Kraftform Stubby with anti-roll protection, multi-component, integrated magazine Features and benefits The handle can be opened and thus gives access to the six bits contained in the magazine. With its compact handle shape and the short blade, the Kraftform Stubbies are particularly suitable for working in confined screwdriving situations. The swivelling bit magazine allows for the bits to be removed easily in almost any situation and cannot be lost. The bits are safely stored. The magnet ensures that the bit is securely seated in the holder. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery Kraftform Kompakt Stubby magazine 4, 6 pieces 3x 851/1 Z bits: PH 1x25 mm, PH 2x25 mm, PH 3x25 mm 3x 800/1 Z bits: 0.6x4.5x25 mm, 1x5.5x25 mm, 1.2x6.5x25 mm kts: compact screwdriver with internal bit magazine 6-piece kpn: Kraftform Kompakt Stubby Magazin 4 kpn_dash: kpn_clear: KraftformKompaktStubbyMagazin4 bkpn: WERA Kraftform Kompakt Stubby Magazin 4 bkpn_clear: WERA KraftformKompaktStubbyMagazin4 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05008877001 sr_ns: WERA05008877001
r: 87990872 p: 3.17 pid: 71036 b: WERA q: 63 st: 1 lt: 1 ean: 4013288015587 sr: WERA 05056938001 sr_no_br: 05056938001 sr_no_br_cl: 05056938001 sr_cl: WERA05056938001 sr_dash: sold: 168.01 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ2 n: WERA 856/1 TZ ACR PZ bit Pozidriv, PZ 2 x 25 mm - 05056938001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits with Torsion zone: where kinetic energy is diverted from peak loads. This greatly extends the product service life. Come with rough ribs (anti cam-out feature, ACR®). Tough viscous, for universal use; 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Suitable for Pozidriv screws ACR® (anti cam-out feature) to prevent any slipping out of the screw head Torsion zone for absorption of peak loads Enhanced service life of the bits Tough for hard materials Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Torsion-style design to reduce premature wear, tough, for universal use, ACR® (Anti Cam-Out Ribs) prevents bits from slipping out of screw head Features and benefits ACR® stands for "anti-cam-out ribs". ACR® bits have ribs at the drive tip that protect against slipping out of the screw head. It is recommended that ACR® bits are matched with ribbed ACR® screws for maximum effect. ACR® is a registered trademark of Phillips Screw Company. TZ-Bits are tough viscous bits with a torsion zone. Torsion bits absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. ds: dsc: Scope of delivery 856/1 TZ ACR® bits, PZ 2 x 25 mm kts: bit Pozidriv, PZ 2 x 25 mm kpn: 856/1 TZ ACR PZ kpn_dash: kpn_clear: 8561TZACRPZ bkpn: WERA 856/1 TZ ACR PZ bkpn_clear: WERA 8561TZACRPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056938001 sr_ns: WERA05056938001
r: 02831987 p: 11.2 pid: 42880 b: WERA q: 0 st: lt: 8 ean: 4013288029614 sr: WERA 05073344001 sr_no_br: 05073344001 sr_no_br_cl: 05073344001 sr_cl: WERA05073344001 sr_dash: sold: 168 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 1/4" Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 1/4" Quantity per blister 1 n: WERA 840/1 Z Set SB SiS 840/1 Z Set SB (3 pcs) - 05073344001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough viscous Wera bits for hexagon socket screws in a practical 3-piece set, for universal use. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3 In a practical 3-piece set Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/1 Z Sets SB, 3 pieces 3x 840/1 Z bits: 4x25 mm, 5x25 mm, 6x25 mm kts: 840/1 Z Set SB (3 pcs) kpn: 840/1 Z Set SB SiS kpn_dash: kpn_clear: 8401ZSetSBSiS bkpn: WERA 840/1 Z Set SB SiS bkpn_clear: WERA 8401ZSetSBSiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073344001 sr_ns: WERA05073344001
r: 02865720 p: 55.537 pid: 31093 b: WERA q: 0 st: lt: 12 ean: 4013288196347 sr: WERA 05078635001 sr_no_br: 05078635001 sr_no_br_cl: 05078635001 sr_cl: WERA05078635001 sr_dash: sold: 166.611 p_range: none type: standard act: 1 avo: 1 av: Drive profile size 1/4" Type of drive profile Outer square Connection size 9 x 12 mm Connection profile Outer rectangle n: WERA 7772 A plug-in ratchet switchable, 9x12 mm, 49 mm x 1/4" - 05078635001 cn: RATCHET HEAD cn2: RATCHET HEAD cn_clear: RATCHETHEAD d: Product description Ratchet insert, reversible, for 1/4" square socket wrench inserts and 1/4" connecting parts with square drive; for torque wrenches of the Click-Torque X series with 9x12 mm holder. For torque wrenches from the Click-Torque X series with 9x12 mm mounting For 1/4" square socket wrench inserts and 1/4" connecting parts with square drive Fine toothing with 72 teeth Easy switching by knob Socket lock by push button Application For 1/4" square socket wrench inserts and 1/4" connecting parts with square drive Drive 9x12 mm; for torque wrenches of the Click-Torque X and XP series with 9x12 mm holder Design With reversing ratchet, push-button release, forged, chrome-vanadium steel, matt chrome-plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 9x12 mm mounting. Fine-pitched with 72 teeth for a return angle of only 5° For 1/4" square socket wrench inserts and 1/4" connecting parts with square drive. Easy switching by knob. Safe socket lock via push button The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. ds: dsc: Scope of delivery 7772 A Ratchet insert, reversible, 9x12 mm, 9x12 x 1/4" x 48.6 mm kts: plug-in ratchet switchable, 9x12 mm, 49 mm x 1/4" kpn: 7772 A kpn_dash: kpn_clear: 7772A bkpn: WERA 7772 A bkpn_clear: WERA 7772A c_path: Home / Tools / Hand tools / Sockets and ratchets / Ratchets / Ratchet head | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera ratchets / Wera ratchet head sr_no_br_cl_ns: 05078635001 sr_ns: WERA05078635001
r: 02763444 p: 6.942 pid: 4309 b: WERA q: 0 st: lt: 8 ean: 4013288016577 sr: WERA 05060278001 sr_no_br: 05060278001 sr_no_br_cl: 05060278001 sr_cl: WERA05060278001 sr_dash: sold: 166.608 p_range: none type: standard act: 1 avo: 1 av: Shank size 1/4 inch Socket size 8 mm Type of drive profile (socket) Hexagonal Shank type Outer hexagon Length 65 mm n: WERA 869/4 cap bit 8 x 65 mm - 05060278001 cn: NUT SETTER cn2: NUT SETTER cn_clear: NUTSETTER d: Product description Non-magnetic design. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Nutsetter for hexagon head screws Metric Non-magnetic design 1/4" hexagon drive Application Hexagon headed bolts, screws and nuts Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Non-magnetic Features and benefits Non-magnetic nutsetters that do not attract metal filings. ds: dsc: Scope of delivery 869/4 Nutsetters, 8 x 65 mm kts: cap bit 8 x 65 mm kpn: 869/4 kpn_dash: kpn_clear: 8694 bkpn: WERA 869/4 bkpn_clear: WERA 8694 c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Nut setter | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera nut setter sr_no_br_cl_ns: 05060278001 sr_ns: WERA05060278001
r: 87010005 p: 3.2 pid: 72812 b: WERA q: 14 st: 1 lt: 1 ean: 4013288013354 sr: WERA 05056520001 sr_no_br: 05056520001 sr_no_br_cl: 05056520001 sr_cl: WERA05056520001 sr_dash: sold: 166.4 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 n: WERA 851/1 Z PH bit Phillips, PH 2 x 50 mm - 05056520001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for Phillips screws, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For Phillips screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 851/1 Z bits, PH 2 x 50 mm kts: bit Phillips, PH 2 x 50 mm kpn: 851/1 Z PH kpn_dash: kpn_clear: 8511ZPH bkpn: WERA 851/1 Z PH bkpn_clear: WERA 8511ZPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056520001 sr_ns: WERA05056520001
r: 87010119 p: 2.13 pid: 72110 b: WERA q: 82 st: 1 lt: 1 ean: 4013288014764 sr: WERA 05056925001 sr_no_br: 05056925001 sr_no_br_cl: 05056925001 sr_cl: WERA05056925001 sr_dash: sold: 166.14 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 3 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ3 n: WERA 855/1 TH PZ bit Pozidriv, PZ 3 x 25 mm - 05056925001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Extra-hard. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. Suitable for Pozidriv screws Torsion zone for absorption of peak loads Enhanced service life of the bits Particularly hard for semi-hard materials 1/4" hexagon drive (Wera connecting series 1) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Torsion-style design to reduce premature wear, extra-hard Features and benefits TH-Bits are hard bits with a torsion zone. Torsion bits absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. ds: dsc: Scope of delivery 855/1 TH bits, PZ 3 x 25 mm kts: bit Pozidriv, PZ 3 x 25 mm kpn: 855/1 TH PZ kpn_dash: kpn_clear: 8551THPZ bkpn: WERA 855/1 TH PZ bkpn_clear: WERA 8551THPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056925001 sr_ns: WERA05056925001
r: 03177019 p: 11.074 pid: 31375 b: WERA q: 0 st: lt: 13 ean: 4013288219497 sr: WERA 05030331001 sr_no_br: 05030331001 sr_no_br_cl: 05030331001 sr_cl: WERA05030331001 sr_dash: sold: 166.11 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size PL1 Blade length 40 mm Blade thickness ESD Yes Non-sparking No VDE approved No With safety colour code 1000V Drive type Pentalobe Product Range Wera Kraftform n: WERA 1573 Pentalobe ESD Kraftform Micro screwdriver, PL 1.4 x 40 mm - 05030331001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description ESD-safe Micro screwdriver. Dependable protection against electrostatic energy and associated damage. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. The Black Point tip offers optimised corrosion protection and an exact fit. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. Kraftform Micro screwdriver for Pentalobe screws ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Multi-component Kraftform Micro handle for fast and ergonomic screwdriving The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Application Pentalobe screws Blade Round Design Nicromatt, Black Point tip Handle Kraftform Micro with anti-roll protection and rotating cap, multi-component. With tool finder Take it easy: colour coding by profile (purple = Pentalobe) and size stamping. Features and benefits The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Multi-component screwdriver handle for ergonomic working. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 1573 Pentalobe ESD Kraftform Micro screwdriver, PL 1.4 x 40 mm kts: Kraftform Micro screwdriver, PL 1.4 x 40 mm kpn: 1573 Pentalobe ESD kpn_dash: kpn_clear: 1573PentalobeESD bkpn: WERA 1573 Pentalobe ESD bkpn_clear: WERA 1573PentalobeESD c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05030331001 sr_ns: WERA05030331001
r: 03226464 p: 18.347 pid: 70163 b: WERA q: 0 st: lt: 9 ean: 4013288214096 sr: WERA 05008872001 sr_no_br: 05008872001 sr_no_br_cl: 05008872001 sr_cl: WERA05008872001 sr_dash: sold: 165.123 p_range: none type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 5 n: WERA Stubby Set 3 screwdriver set 5-piece - 05008872001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description Especially small screwdrivers with short blades for hard to reach areas. The 2-component Kraftform handle with its practical combination of hard and soft zones allows for a firm grip and precise working. The blades have all the benefits of the Wera Bit technology. Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head. The hexagon anti-roll protection prevents annoying rolling away of bits in the workplace. Short compact shape for working in confined spaces Ergonomic 2-component Kraftform handle for precise work Blades with the benefits of the Wera Bit technology Hexagonal anti-roll feature against rolling away Take it easy tool finder: colour coding according to profile and size With Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted, Phillips and square socket screws Design 5-piece set in display carton Features and benefits With its compact handle shape and the short blade, the Kraftform Stubbies are particularly suitable for working in confined screwdriving situations. The 2-component Kraftform handle allows high power transmission due to the non-slip, softer grip areas and high working speeds due to the hard grip areas, which allow a quick hand switch. The special surface treatment of the blades sees to a high level of corrosion protection and optimum fitting accuracy of the screw. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery Stubby Set 3 Screwdriver set, 5 pieces 2x 350 PH Phillips-head Stubby/carburetor screwdriver: PH 1x25 mm, PH 2x25 mm 1x 335 Stubby/carburetor screwdriver: 1 x 5.5 x 24.5 mm 2x 368 Stubby screwdriver for square head socket screws: # 1x25 mm, # 2x25 mm kts: screwdriver set 5-piece kpn: Stubby Set 3 kpn_dash: kpn_clear: StubbySet3 bkpn: WERA Stubby Set 3 bkpn_clear: WERA StubbySet3 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set sr_no_br_cl_ns: 05008872001 sr_ns: WERA05008872001
r: 02828765 p: 8.223 pid: 42528 b: WERA q: 0 st: lt: 12 ean: 4013288032881 sr: WERA 05134677001 sr_no_br: 05134677001 sr_no_br_cl: 05134677001 sr_cl: WERA05134677001 sr_dash: sold: 164.46 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 40 Blade thickness Type of drive profile (bit) Torx Plus Connection size (bit) 1/4" VDE approved No Bit tip IP40 n: WERA 867/4 IP TORX PLUS bit, 40 IP x 89 mm - 05134677001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX PLUS® screws. TORX PLUS® profile: in comparison to normal TORX® profiles, the enlargement of the 6 torque-transferring flanks between the tool and the screw is effected by means of an ellipse-shaped profile design and not a circular one. This means that the power applied when screwdriving is spread over a larger area. Higher torque is transferred and the service life of the screw and tool is also enhanced. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For TORX PLUS® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX PLUS® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Compared with the "normal" TORX® profile, the elliptical instead of circular profile enlarges the 6 flanks that transfer torque between the tool and the screw. This means that the force applied when screwdriving is spread across a larger surface area. Higher torque is transferred and, in addition, the service life of the screw and tool are lengthened. The so-called centre-lock screws on cutting tools represent a typical use of this type of screw profile. The thermal influences on such holders for carbide insert tips often "bake" the retaining screws so firmly that it is important to have a profile that considerably enhances the loosening torque capability of the screws. For this reason a torque-stable screw profile is necessary to avoid any possible damage to the screw and to exclude the possibility of an otherwise costly machine downtime. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 IP TORX PLUS® bits, 40 IP x 89 mm kts: bit, 40 IP x 89 mm kpn: 867/4 IP TORX PLUS kpn_dash: kpn_clear: 8674IPTORXPLUS bkpn: WERA 867/4 IP TORX PLUS bkpn_clear: WERA 8674IPTORXPLUS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05134677001 sr_ns: WERA05134677001
r: 41071424 p: 20.495 pid: 72019 b: WERA q: 0 st: lt: 11 ean: 4013288121462 sr: WERA 05003643001 sr_no_br: 05003643001 sr_no_br_cl: 05003643001 sr_cl: WERA05003643001 sr_dash: sold: 163.96 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Connection size 1 1/2" Connection size 2 1/2" Connection type 1 (extension) Outer square Connection type 2 (extension) Internal square Length 250 mm VDE approved No With safety colour code 1000V No Non-sparking No Product Range Wera Zyklop n: WERA 8796 LC Zyklop extension "Flexible-Lock" with free-running sleeve, long for 1/2", 1/2" x 250 mm - 05003643001 cn: EXTENSION cn2: EXTENSION cn_clear: EXTENSION d: Product description Wera Zyklop extension with flexible-lock: when activated the sockets are secured and permanently fixed, any unintentional loss being avoided. When the system is deactivated, the sockets can be quickly attached and exchanged. Equipped with a free-turning sleeve for faster turning of screws and nuts. 1/2" Zyklop "flexible-lock" extension with free-turning sleeve, long For 1/2" square sockets with ball lock Flexible lock system for either locking or rapid exchange of the attached tool With free-turning sleeve for rapid tightening and loosening of screws and nuts Chrome vanadium steel, matte chrome-plated Application 1/2" square drive sockets with ball lock Design Flexible-lock system either for permanent interlocking or fast change of accessories, free-turning sleeve for rapid tightening or loosening of screws and nuts, chrome vanadium, brushed chrome-plated finish Features and benefits With easy-to-grip free-turning sleeve for rapid tightening and loosening of screws and nuts The extensions from the premium lines are also equipped with the unique "flexible-lock-system". By activating this system, attachments can be fixed to the extension permanently - preventing slipping and any unintentional loss of the attachment. When the system is deactivated, the sockets can be attached as usual and changed in a flash. The free-turning sleeve on the Zyklop Speed and the Zyklop extension effectively accelerates the turning of screws and nuts. ds: dsc: Scope of delivery 8796 LC Zyklop "flexible-lock" extension with free-turning sleeve, long, 1/2", 1/2" x 250 mm kts: Zyklop extension "Flexible-Lock" with free-running sleeve, long for 1/2", 1/2" x 250 mm kpn: 8796 LC kpn_dash: kpn_clear: 8796LC bkpn: WERA 8796 LC bkpn_clear: WERA 8796LC c_path: Home / Tools / Hand tools / Sockets and ratchets / Accessories and spare parts / Extension | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera accessories and spare parts / Wera extension | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003643001 sr_ns: WERA05003643001
