r: 41070393 p: 12.03 pid: 71139 b: WERA q: 2 st: 1 lt: 1 ean: 4013288018007 sr: WERA 05018260001 sr_no_br: 05018260001 sr_no_br_cl: 05018260001 sr_cl: WERA05018260001 sr_dash: sold: 300.75 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 3,5 mm Blade length 80 mm Blade thickness 0,6 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 932 A saw-cut screwdriver, 0.6 x 3.5 x 80 mm - 05018260001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera screwdriver to tighten or loosen screws. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Hexagonal blade out of high quality bit material enables a full transfer of force. Ductile tempered material prevents any splintering or breaking of the blade. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Multi-component Kraftform handle for fast and ergonomic screwdriving Smooth hard zones for high speed turning, soft grip zones for high torque transfer The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Slotted screws Blade Hexagonal throughout with impact cap, hexagonal bolster from 0.8 x 4.5 Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, sizes 2.0 x 12.0, 2.5 x 14.0: Kraftform with non-roll feature, single-component Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 932 A Screwdriver for slotted screws, 0.6 x 3.5 x 80 mm kts: saw-cut screwdriver, 0.6 x 3.5 x 80 mm kpn: 932 A kpn_dash: kpn_clear: 932A bkpn: WERA 932 A bkpn_clear: WERA 932A c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05018260001 sr_ns: WERA05018260001
r: 41070341 p: 9.1 pid: 70576 b: WERA q: 0 st: lt: 9 ean: 4013288003751 sr: WERA 05022800001 sr_no_br: 05022800001 sr_no_br_cl: 05022800001 sr_cl: WERA05022800001 sr_dash: sold: 300.3 p_range: none type: standard act: 1 avo: 1 av: Drive size HEX 2 mm Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Ball-end hexagon n: WERA 352 hexagonal ball head screwdriver, 2 x 100 mm - 05022800001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. The ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Hexagonal ballpoint screwdriver Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal blade and ballpoint for secure working even in difficult installation situations The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Hexagon socket screws Blade Hexagonal Design Ball end hexagon, chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, sizes W/F 12.0, W/F 1/2": Kraftform with non-roll feature, single-component. Take it easy tool finder: colour coding according to profile (blue = hexagon) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 352 Ball end screwdriver for hexagon socket screws, 2 x 100 mm kts: hexagonal ball head screwdriver, 2 x 100 mm kpn: 352 kpn_dash: kpn_clear: 352 bkpn: WERA 352 bkpn_clear: WERA 352 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05022800001 sr_ns: WERA05022800001
r: 41070353 p: 8.31 pid: 70406 b: WERA q: 2 st: 1 lt: 1 ean: 4013288003973 sr: WERA 05023115001 sr_no_br: 05023115001 sr_no_br_cl: 05023115001 sr_cl: WERA05023115001 sr_dash: sold: 299.16 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Drive size HEX 4 mm Blade length 75 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Hexagon Product Range Wera Hex-Plus n: WERA 354 Hex-Plus hexagonal screwdriver, 4 x 75 mm - 05023115001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool . The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Hexagonal screwdriver Hex-Plus Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hex-Plus allows socket head screws to live longer Hexagonal anti-roll feature against rolling away Application Hexagon socket screws Blade Round Design Hex-Plus, chrome-plated Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (blue = hexagon) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 354 Screwdriver for hexagon socket screws, 4 x 75 mm kts: hexagonal screwdriver, 4 x 75 mm kpn: 354 Hex-Plus kpn_dash: 354 Hex kpn_clear: 354HexPlus bkpn: WERA 354 Hex-Plus bkpn_clear: WERA 354HexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05023115001 sr_ns: WERA05023115001
r: 41070317 p: 9.256 pid: 71710 b: WERA q: 10 st: 1 lt: 1 ean: 4013288004055 sr: WERA 05009315001 sr_no_br: 05009315001 sr_no_br_cl: 05009315001 sr_cl: WERA05009315001 sr_dash: sold: 296.192 p_range: none type: standard act: 1 avo: 1 av: Drive size PZ2 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Pozidriv n: WERA 355 PZ Pozidriv screwdriver, PZ 2 x 100 mm - 05009315001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver by Wera. Hard handle zones for high working speeds, soft handle zones for a high torque transfer and for fast and smooth work. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head and unintentional slipping is a thing of the past. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Screwdriver, for cross-recess screws, Pozidriv Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Application Suitable for Pozidriv screws Blade Round Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (black = Pozidriv) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 355 PZ Screwdriver for Pozidriv screws, PZ 2 x 100 mm kts: Pozidriv screwdriver, PZ 2 x 100 mm kpn: 355 PZ kpn_dash: kpn_clear: 355PZ bkpn: WERA 355 PZ bkpn_clear: WERA 355PZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05009315001 sr_ns: WERA05009315001
r: 03228237 p: 59.008 pid: 69660 b: WERA q: 0 st: lt: 8 ean: 4013288220622 sr: WERA 05004176001 sr_no_br: 05004176001 sr_no_br_cl: 05004176001 sr_cl: WERA05004176001 sr_dash: sold: 295.04 p_range: none type: standard act: 1 avo: 1 av: Connection size 3/8" Type of drive profile Mixed; Torx; Hexagonal Supplied in Case Quantity per set 8 n: WERA Bicycle Set 8 bit set 3/8" for bicycle repair 7-piece - 05004176001 cn: BIT SOCKET SET cn2: BIT SOCKET SET cn_clear: BITSOCKETSET d: Product description 7-piece bit socket set with 3/8" drive for typical bicycle operations. Bit sockets with 30 mm long and extra slim profile area for better accessibility in tight workspaces. The knurling facilitates manual screwdriving without slipping. With Take it easy tool finder with colour coding by size - to help you find the required tool quickly and easily. Bit sockets for the most common TORX® and Hex screws Long bit sockets with extra slim, cylindrical profile zone for low-located couplings (e.g. for bottom bracket ball bearing or stem-fork-clamping) With extra slim 30 mm long profile area With Take it easy tool finder: colour coding by size Knurling on lower socket end for more grip when used manually 7-piece setFolding pouch with 100 mm/107 mm long bit sockets7 Zyklop bit sockets with 3/8" drive; with 30 mm and extra slim profile area for better accessibility in tight workspaces. Take it easy tool finder: With colour coding by size as well as size stamping - to help you find the required bit socket quickly and easily. Features and benefits Wera packaging bearing this symbol contains tool pouches or textile boxes with nonwoven sections that can be docked with the Wera 2go system. ds: dsc: Scope of delivery Bicycle Set 8, 7 pieces 2x 8767 B TORX® Zyklop Bit socket with 3/8" drive, with extra slim profile area: TX 25x107 mm, TX 30x107 mm 5x 8740 B Zyklop Bit socket with 3/8" drive, with extra slim profile area: 4x107 mm, 5x107 mm, 6x107 mm, 8x100 mm, 10x100 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: bit set 3/8" for bicycle repair 7-piece kpn: Bicycle Set 8 kpn_dash: kpn_clear: BicycleSet8 bkpn: WERA Bicycle Set 8 bkpn_clear: WERA BicycleSet8 c_path: Home / Tools / Hand tools / Sockets and ratchets / Sets / Bit socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sets / Wera bit socket set sr_no_br_cl_ns: 05004176001 sr_ns: WERA05004176001
r: 03230328 p: 19.669 pid: 70168 b: WERA q: 0 st: lt: 16 ean: 4013288222374 sr: WERA 05051576001 sr_no_br: 05051576001 sr_no_br_cl: 05051576001 sr_cl: WERA05051576001 sr_dash: sold: 295.035 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved Yes With safety colour code 1000V No Supplied in Cardboard box Quantity per set 6 Product Range Wera Kraftform n: WERA 1060 i/1065 i/6 VDE screwdriver set Kraftform VDE 6-piece - 05051576001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description Premium Kraftform VDE screwdriver set. Multi-component Kraftform handle for fast and gentle work. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Handles marked to find and sort the tools easily. Multi-component Kraftform handle for fast and low-fatigue working Individually tested Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Slotted and Pozidriv screws Design 6-piece set in a box Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The multi-component Kraftform handle for quick and low-fatigue working. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 1060 i/1065 i/6 Kraftform VDE screwdriver set, 6 pieces 2x 1065 i PZ VDE-insulated Kraftform Phillips-head screwdriver: PZ 1x80 mm, PZ 2x100 mm 4x 1060 i VDE-insulated Kraftform slotted screwdriver: 0.4x2.5x80 mm, 0.6x3.5x100 mm, 0.8x4x100 mm, 1x5.5x125 mm kts: screwdriver set Kraftform VDE 6-piece kpn: 1060 i/1065 i/6 VDE kpn_dash: kpn_clear: 1060i1065i6VDE bkpn: WERA 1060 i/1065 i/6 VDE bkpn_clear: WERA 1060i1065i6VDE c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05051576001 sr_ns: WERA05051576001
r: 02815627 p: 4.21 pid: 44857 b: WERA q: 0 st: lt: 12 ean: 4013288106636 sr: WERA 05135060001 sr_no_br: 05135060001 sr_no_br_cl: 05135060001 sr_cl: WERA05135060001 sr_dash: sold: 294.7 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 25 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 0,05" Drive profile size (bit) 0,05" Product Range Wera Hex-Plus n: WERA 840/1 Z Hex-Plus hexagon bit, 0.05" x 25 mm - 05135060001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw head is almost eliminated. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/1 Z bits, 0.05" x 25 mm kts: hexagon bit, 0.05" x 25 mm kpn: 840/1 Z Hex-Plus kpn_dash: 840/1 Z Hex kpn_clear: 8401ZHexPlus bkpn: WERA 840/1 Z Hex-Plus bkpn_clear: WERA 8401ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05135060001 sr_ns: WERA05135060001
r: 41996460 p: 16.363 pid: 72776 b: WERA q: 0 st: lt: 13 ean: 4013288032539 sr: WERA 05005325001 sr_no_br: 05005325001 sr_no_br_cl: 05005325001 sr_cl: WERA05005325001 sr_dash: sold: 294.534 p_range: none type: standard act: 1 avo: 1 av: Width across flats 10 mm With safety colour code 1000V ESD No Handle type Screwdriver handle Overall length 237 mm Blade length 125 mm VDE approved Yes n: WERA 190I VDE insulated cap screwdriver 10.0 x 125 mm - 05005325001 cn: NUT DRIVER cn2: NUT DRIVER cn_clear: NUTDRIVER d: Product description Wera VDE socket wrenches with multi-component Kraftform for fast and low-fatigue working: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Individual testing at 10,000 volts so as to ensure safe working at the permitted voltage of 1,000 volts. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Insulated blades for secure work at 1,000 volts Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Zinc phosphate plated Application Hexagon headed bolts, screws and nuts Blade Insulated, individually inspected as per IEC 60900 Design Zinc-phosphated Handle Kraftform with non-roll feature, multi-component Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces - resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 190 i VDE Insulated nutdriver, 10 x 125 mm kts: VDE insulated cap screwdriver 10.0 x 125 mm kpn: 190I kpn_dash: kpn_clear: 190I bkpn: WERA 190I bkpn_clear: WERA 190I c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Nut driver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera nut driver sr_no_br_cl_ns: 05005325001 sr_ns: WERA05005325001
r: 02835993 p: 97.851 pid: 41729 b: WERA q: 0 st: lt: 12 ean: 4013288179166 sr: WERA 05074782001 sr_no_br: 05074782001 sr_no_br_cl: 05074782001 sr_cl: WERA05074782001 sr_dash: sold: 293.553 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1 Nm Max. tightening torque 1 Nm Product Range Wera Kraftform n: WERA 7431 ESD Kraftform adjustable torque screwdriver with Rapidaptor quick-change holder 0.30-1.00 Nm - 05074782001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Dependable protection against electrostatic energy and associated damage. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Adjustable Kraftform ESD torque screwdriver with Rapidaptor quick-release chuck ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Multi-component Kraftform handle for fast and low-fatigue working Hexagonal anti-roll feature against rolling away Rapidaptor quick-release chuck for bits with 1/4" hex head drive Application Suitable for 1/4" DIN ISO 1173 C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology, non-magnetic Accuracy ±6 % (DIN EN ISO 6789). Numerical torque value scale. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. Simple setting of the required torque by hand. Easy-to-read scale value. Articles 7430, 7431 and 7432 all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. ds: dsc: Scope of delivery Series 7400 ESD Kraftform adjustable torque screwdrivers (0.1-3.0 Nm) with Rapidaptor quick-release chuck, 7431 ESD x 0.30-1.00 Nm kts: Kraftform adjustable torque screwdriver with Rapidaptor quick-change holder 0.30-1.00 Nm kpn: 7431 ESD kpn_dash: kpn_clear: 7431ESD bkpn: WERA 7431 ESD bkpn_clear: WERA 7431ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074782001 sr_ns: WERA05074782001
r: 08107991 p: 97.851 pid: 159679 b: WERA q: 0 st: lt: 13 ean: 4013288230041 sr: WERA 05006640001 sr_no_br: 05006640001 sr_no_br_cl: 05006640001 sr_cl: WERA05006640001 sr_dash: sold: 293.553 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder type Internal hexagon Type of drive profile (bit) Mixed VDE approved Yes With safety colour code 1000V Yes ESD No Supplied in Case Product Range Wera Kraftform Kompakt n: WERA 05006640001 Kraftform Kompakt Turbo i 1 Tool Finder, 16-piece cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Many users wish to carry out screwdriving operations faster without compromises. With a screwdriver which is precise, allows powerful end screwdriving and is also much faster than a conventional screwdriver. The solution: A planetary drive that can be switched on and off: Integrated in the handle it quadruples the working speed in smooth couplings all mechanically. One hand holds the front part of the handle, the second hand turns the back part of the handle. The turbo function can be switched on and off at the push of a button. Turning it off is recommended for tightening and loosening with high torque as well as for fine adjustments. Robust, maintenance-free steel drive with maximum torque of 14 Nm when the turbo function is deactivated. In the VDE version, the 827 T i Kraftform Turbo bitholding screwdriver with the Wera VDE blades individually tested as per IEC 60900 ensures fast and safe working even under tension (up to 1,000 volt). VDE blades with Take it easy Tool finder: Colour coding by profile and laser-engraved size indication - for quick and easy identification of the required tool. In a robust belt pouch. The textile box features a fleece zone at the back. Using the provided self-adhesive hook and loop fastener strips, the textile box can be attached to the Wera 2go components. Or to the wall, shelf or workshop trolley. 4 times the screwdriving speed thanks to the turbo function (purely mechanical - without battery) Activate and deactivate the turbo function by a simple push of a button Turbo function especially for smooth couplings Can be used without the turbo function like a normal screwdriver for couplings with steadily increasing torque Robust, maintenance-free gear made of steel 16-piece setOne Kraftform 817 VDE bladeholding handle and one 827 T i Kraftform Turbo bladeholding handle; both solely for Wera VDE blades14 VDE blades (each 157 mm length) with Take it easy Tool finder with colour coding by profile and laser-engraved size indication; with reduced blade diameter and integrated protective insulation, low-lying screw and spring elements can be easily reached and operated (items Kraftform Kompakt 60 i Take it easy 0.4x2.5 and Kraftform Kompakt 67 i Take it easy TX 10 standard blade diameter).In a robust belt pouch Features and benefits The construction of the Kraftform Turbo allows the speed of manual screwdriving to be quadrupled, especially for smooth couplings - without electricity! The robust steel design is maintenance-free and ensures a long product life. With its 9 mm mounting, the Kraftform Turbo is suitable for all Wera Kraftform Kompakt VDE interchangeable blades. The "holder/interchangeable blade system" stands for flexible working with many screw profiles. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The turbo function can be switched on or off at the push of a button. Turning it off is recommended for tightening and loosening with high torque as well as for fine adjustments. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. ds: dsc: Scope of delivery Kraftform Kompakt Turbo i 1 Tool finder, 16 pieces 1x 827 T i Kraftform Turbo bladeholding handle: 9 x 125 mm 1x 817 VDE Kraftform blade-holding handle: 9 x 98 mm 2x Kraftform Kompakt VDE 62 iS Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 65 iS Take it easy: PZ 1x157 mm, PZ 2x157 mm 2x Kraftform Kompakt VDE 65 iS PZ/S Take it easy: # 1x157 mm, # 2x157 mm 1x Kraftform Kompakt VDE 67 i TORX® Take it easy: TX 10 x 157 mm 3x Kraftform Kompakt VDE 67 iS TORX® Take it easy: TX 15x157 mm, TX 20x157 mm, TX 25x157 mm 1x Kraftform Kompakt VDE 60 i Take it easy: 0.4 x 2.5 x 157 mm 3x Kraftform Kompakt VDE 60 iS Take it easy: 0.6x3.5x157 mm, 0.8x4x157 mm, 1x5.5x157 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: Kraftform Kompakt Turbo i 1 Tool Finder, 16-piece kpn: 05006640001 kpn_dash: kpn_clear: 05006640001 bkpn: WERA 05006640001 bkpn_clear: WERA 05006640001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006640001 sr_ns: WERA05006640001
r: 03176903 p: 18.347 pid: 31953 b: WERA q: 0 st: lt: 8 ean: 4013288218858 sr: WERA 05020503001 sr_no_br: 05020503001 sr_no_br_cl: 05020503001 sr_cl: WERA05020503001 sr_dash: sold: 293.552 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 24 mm Length 280 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (24 x 280 mm) - 05020503001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 24 x 280 mm kts: ring spanner (24 x 280 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020503001 sr_ns: WERA05020503001
r: 87991012 p: 5.86 pid: 73038 b: WERA q: 0 st: lt: 12 ean: 4013288034069 sr: WERA 05066106001 sr_no_br: 05066106001 sr_no_br_cl: 05066106001 sr_cl: WERA05066106001 sr_dash: sold: 293 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 25 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T25 n: WERA 867/1 TORX BDC bit, TX 25 x 25 mm - 05066106001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Bits for recessed TORX® screws with tiny diamond particles on the bit tip. This ensures a secure fit of the bit in the screw, reduces the contact pressure required and lowers the risk of slipping. Come with a Torsion zone where kinetic energy is diverted from peak loads. This greatly extends the product service life. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For recessed TORX® screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out 1/4" hexagon drive (Wera connecting series 1) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design BiTorsion for long service life, diamond-coated for secure screw fit. Take it easy tool finder: Output colour coding (green = TORX®) and large stamp to enable the desired bit to be easily located. Features and benefits Particularly when applications involve sensitive materials or high quality surfaces are involved, bits with a diamond coating ensure that work is done safer, faster and at lower cost. Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. One of the greatest problems with power tool applications is that the conventional bit easily slips out of the head of the screw (cam-out). This often destroys both the head of the screw and the tool. High resulting costs are incurred e.g. from damaged surfaces and screw connections that can no longer be loosened. Screwdriving will become safer and more economic if this problem of slipping can be minimised. Today, the Wera diamond bit - manufactured with the technology specifically developed by Wera for this application - still sets the standard in terms of resilience and functionality. Wera bits with a diamond coating ensure a secure fit of the bit in the screw head. The minute diamond particles applied to the tip of the tool literally "bite" into the screw and ensure an exact, anti-slip fit in the head of the screw. This secure fit protects the screw. The cam-out forces which compel the user to apply greater pressure to the screw are considerably reduced. Ideal for sensitive materials The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 867/1 BDC TORX® bits, TX 25 x 25 mm kts: bit, TX 25 x 25 mm kpn: 867/1 TORX BDC kpn_dash: kpn_clear: 8671TORXBDC bkpn: WERA 867/1 TORX BDC bkpn_clear: WERA 8671TORXBDC c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066106001 sr_ns: WERA05066106001
r: 08103831 p: 17.19 pid: 70262 b: WERA q: 0 st: lt: 8 ean: 4013288230690 sr: WERA 05136414001 sr_no_br: 05136414001 sr_no_br_cl: 05136414001 sr_cl: WERA05136414001 sr_dash: sold: 292.23 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Product Range Wera Kraftform n: WERA 9611 magnetic strip for max. 9 Kraftform screwdrivers, empty, 30 x 400 mm - 05136414001 cn: ACCESSORY/PART SCREWING cn2: ACCESSORY/PART SCREWING cn_clear: ACCESSORYPARTSCREWING d: Product description Empty magnetic rail. For up to 9 Kraftform screwdrivers. The clips ensure perfect hold und easy access to the tools. With its strong magnet, the rail holds securely to metal surfaces. The rail can also be bolted to the wall. The clips hold the tools perfectly With its strong magnet, the rail holds securely to metal surfaces. It can also be bolted to the wall. One magnetic rail, empty. For up to 9 Kraftform screwdrivers. The rail allows temporary attachment to metallic surfaces and, thanks to the strong terminals, ensures reliable clamping and easy access to the tools. The rail can also be bolted to the wall. Features and benefits The high-quality aluminium magnetic rail offers space for up to 9 Kraftform screwdrivers. The clamping springs hold the tools securely. With its strong magnet, the rail can be attached securely to metal surfaces. The rail can also be bolted to the wall. ds: dsc: Scope of delivery 9611 Magnetic rail for up to 9 Kraftform screwdrivers, empty, 30 x 400 mm kts: magnetic strip for max. 9 Kraftform screwdrivers, empty, 30 x 400 mm kpn: 9611 kpn_dash: kpn_clear: 9611 bkpn: WERA 9611 bkpn_clear: WERA 9611 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Accessory/part screwing | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera accessory/part screwing | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05136414001 sr_ns: WERA05136414001
r: 02033045 p: 5.79 pid: 44356 b: WERA q: 0 st: lt: 15 ean: 4013288030535 sr: WERA 05060132001 sr_no_br: 05060132001 sr_no_br_cl: 05060132001 sr_cl: WERA05060132001 sr_dash: sold: 289.5 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 10 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T10 n: WERA 867/4 Z TORX bit, TX 10 x 50 mm - 05060132001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for TORX® socket screws. Tough, for universal use. 1/4" hexagonal, suitable for bitholding screwdrivers as per DIN ISO 1173-F 6.3. For recessed TORX® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 Z TORX® bits, TX 10 x 50 mm kts: bit, TX 10 x 50 mm kpn: 867/4 Z TORX kpn_dash: kpn_clear: 8674ZTORX bkpn: WERA 867/4 Z TORX bkpn_clear: WERA 8674ZTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05060132001 sr_ns: WERA05060132001
r: 02033074 p: 5.79 pid: 44362 b: WERA q: 15 st: 1 lt: 1 ean: 4013288030610 sr: WERA 05060135001 sr_no_br: 05060135001 sr_no_br_cl: 05060135001 sr_cl: WERA05060135001 sr_dash: sold: 289.5 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 25 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T25 n: WERA 867/4 Z TORX bit, TX 25 x 50 mm - 05060135001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for TORX® socket screws. Tough, for universal use. 1/4" hexagonal, suitable for bitholding screwdrivers as per DIN ISO 1173-F 6.3. For recessed TORX® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 Z TORX® bits, TX 25 x 50 mm kts: bit, TX 25 x 50 mm kpn: 867/4 Z TORX kpn_dash: kpn_clear: 8674ZTORX bkpn: WERA 867/4 Z TORX bkpn_clear: WERA 8674ZTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05060135001 sr_ns: WERA05060135001
r: 87940082 p: 7.603 pid: 74440 b: WERA q: 0 st: lt: 8 ean: 4013288017062 sr: WERA 05050210001 sr_no_br: 05050210001 sr_no_br_cl: 05050210001 sr_cl: WERA05050210001 sr_dash: sold: 288.914 p_range: none type: standard act: 1 avo: 1 av: Drive profile size 1/4" Type of drive profile External square Connection size 1/4" Connection profile External hexagon Length 100 mm n: WERA 870/4 adapter 1/4" x 100 mm - 05050210001 cn: SOCKET ADAPTOR cn2: SOCKET ADAPTOR cn_clear: SOCKETADAPTOR d: Product description Tool shaft (adaptor) for power tool sockets with hexagon head drive by Wera. Drive: 1/4" hexagonal. Adaptor for machine-operated nut spinner sockets 1/4" external square 1/4" hexagon drive (Wera connecting series 4) Application Machine-operated nut spinner sockets Design With external square drive Drive 1/4" hexagon, suitable for power tools with DIN ISO 1173-F 6,3 receiver Features and benefits With locking pin; for machine-operated nut spinner sockets ds: dsc: Scope of delivery 870/4 Adaptor, machine-operated nut spinner sockets, 1/4" x 100 mm kts: adapter 1/4" x 100 mm kpn: 870/4 kpn_dash: kpn_clear: 8704 bkpn: WERA 870/4 bkpn_clear: WERA 8704 c_path: Home / Tools / Hand tools / Sockets and ratchets / Accessories and spare parts / Socket adpator | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera accessories and spare parts / Wera socket adpator sr_no_br_cl_ns: 05050210001 sr_ns: WERA05050210001
r: 87010159 p: 8.15 pid: 70954 b: WERA q: 88 st: 1 lt: 1 ean: 4013288013798 sr: WERA 05059760001 sr_no_br: 05059760001 sr_no_br_cl: 05059760001 sr_cl: WERA05059760001 sr_dash: sold: 285.25 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH1 n: WERA 851/4 Z PH bit Phillips, PH 1 x 89 mm - 05059760001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for Phillips screws. Tough, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For Phillips screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 851/4 Z bits, PH 1 x 89 mm kts: bit Phillips, PH 1 x 89 mm kpn: 851/4 Z PH kpn_dash: kpn_clear: 8514ZPH bkpn: WERA 851/4 Z PH bkpn_clear: WERA 8514ZPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059760001 sr_ns: WERA05059760001
r: 08103765 p: 94.876 pid: 71582 b: WERA q: 0 st: lt: 9 ean: 4013288228338 sr: WERA 05075851001 sr_no_br: 05075851001 sr_no_br_cl: 05075851001 sr_cl: WERA05075851001 sr_dash: sold: 284.628 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 2 Nm Max. tightening torque 6 Nm Connection size (Handle) 1/4" Supplied in Case Quantity per set 16 Product Range Wera Kraftform n: WERA 7515/16 Kraftform Safe-Torque Speed Universal 1 tool set 16-piece - 05075851001 cn: TORQUE SCREWDRIVER SET cn2: TORQUE SCREWDRIVER SET cn_clear: TORQUESCREWDRIVERSET d: Product description 16-piece tool set. For professional screwdriving/professional fine adjustment AND for torque-controlled screwdriving. Secure slip-over torque mechanism with quick clockwise/counterclockwise setting and five selectable tightening torques (2.0; 3.0; 4.0; 5.0; 6.0 Nm) and one fixed position (Torque Lock) for unlimited loosening and tightening moments. Quick-release holder for high robustness. Suitable for bits with 1/4" external hexagon drive. 15 tough bits (89 mm length). Torque screwdriver with quick torque adjustment Easy and quick torque setting Fixed position (Torque Lock) for unlimited tightening and loosening moments Secure slip-over torque function for clockwise/anti-clockwise torque-control Quick and easy setting of the selectable tightening torques (2.0; 3.0; 4.0; 5.0; 6.0 Nm) 16-piece setFolding pouch with one 7515 torque screwdriver with easy quick torque setting and 15 tough bits (89 mm length) Features and benefits Torque screwdriver with quick torque adjustment Five selectable tightening torques (2.0; 3.0; 4.0; 5.0; 6.0 Nm) and one fixed position (Torque Lock) for unlimited tightening and loosening moments. Rapid setting of the selectable tightening torques. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Storage and transport in a robust and compact textile roll pouch, so the tool is always close at hand. The textile box features a fleece zone at the back. Using the provided self-adhesive hook and loop fastener strips, the textile box can be attached to the Wera 2go components. Or to the wall, shelf or workshop trolley. ds: dsc: Scope of delivery 7515/16 Kraftform Safe-Torque Speed Universal 1, 16 pieces 1x 7515 Kraftform Safe-Torque Speed Torque screwdriver, 2-6 Nm: 1/4" x 2.0 Nm x 3.0 Nm x 4.0 Nm x 5.0 Nm x 6.0 Nm x 147.5 mm 1x 851/4 Z bits: PH 2 x 89 mm 5x 867/4 Z TORX® BO bits with bore hole: TX 10x89 mm, TX 15x89 mm, TX 20x89 mm, TX 25x89 mm, TX 30x89 mm 5x 867/4 IP TORX PLUS® bits: 10 IPx89 mm, 15 IPx89 mm, 20 IPx89 mm, 25 IPx89 mm, 30 IPx89 mm 4x 840/4 Z bits: 3x89 mm, 4x89 mm, 5x89 mm, 6x89 mm kts: tool set 16-piece kpn: 7515/16 Kraftform Safe-Torque Speed Universal 1 kpn_dash: 7515/16 Kraftform Safe kpn_clear: 751516KraftformSafeTorqueSpeedUniversal1 bkpn: WERA 7515/16 Kraftform Safe-Torque Speed Universal 1 bkpn_clear: WERA 751516KraftformSafeTorqueSpeedUniversal1 c_path: Home / Tools / Hand tools / Torque tools / Sets / Torque screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera sets / Wera torque screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05075851001 sr_ns: WERA05075851001
r: 41070384 p: 6.776 pid: 70441 b: WERA q: 6 st: 1 lt: 1 ean: 4013288004277 sr: WERA 05028015001 sr_no_br: 05028015001 sr_no_br_cl: 05028015001 sr_cl: WERA05028015001 sr_dash: sold: 284.592 p_range: none type: standard act: 1 avo: 1 av: Drive size T30 Blade length 115 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx n: WERA 367 TORX screwdriver, TX 30 x 115 mm - 05028015001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and gentle work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Screwdriver for recessed TORX® screws Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away The Wera Black Point tip offers an exact fit and optimum corrosion protection Application TORX® socket screws Blade Round Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (green = TORX®) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 367 Screwdriver for TORX® screws, TX 30 x 115 mm kts: screwdriver, TX 30 x 115 mm kpn: 367 TORX kpn_dash: kpn_clear: 367TORX bkpn: WERA 367 TORX bkpn_clear: WERA 367TORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05028015001 sr_ns: WERA05028015001
