r: 03226513 p: 72.066 pid: 71435 b: WERA q: 0 st: lt: 11 ean: 4013288214836 sr: WERA 05023451001 sr_no_br: 05023451001 sr_no_br_cl: 05023451001 sr_cl: WERA05023451001 sr_dash: sold: 504.462 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Min. head size 3/32 inch Type of drive profile Hexagonal Quantity per set 10 Product Range Wera Hex-Plus n: WERA 454/10 HF Set Imperial 1 screwdriver set T-handle screwdriver Hex-Plus with grip function dimples 10-piece - 05023451001 cn: PIN KEY SET cn2: PIN KEY SET cn_clear: PINKEYSET d: Product description T-handle screwdriver: The ideal handle shape allows the transmission of particularly high tightening and loosening moments. The ergonomic shape of the handle fills the ball of the hand well, the fingers lie securely in the softly rounded recessed grips. The whole hand comes into contact with the handle and friction losses between hand and handle are avoided. With holding function to hold the hexagonal socket screw securely on the tool. Special surface treatment for high corrosion protection and optimal fitting accuracy in the screw. T-handle screwdriver for the transmission of particularly high tightening and loosening torque Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working Take it easy tool finder: colour coding according to profile and size With additional short arm for the transmission of extremely high torques due to the leverage of the long arm With holding function (HF) on the long arm to securely hold the screw on the tool Application Hexagon socket screws, with holding function on the long arm from size 1/8" Design With Take it easy tool finder: colour coding according to profile (blue = hexagon socket) and size stamping. 10-piece set and 2 racks in display carton Features and benefits The ergonomically shaped 2-component T-handle with finger recesses and pleasant surface facilitates very high power transmission and fatigue-free working. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! The additional short arm, which emerges laterally from the handle, allows the transmission of extremely high torques by using the long arm as a lever. By using the blade as an extension of your lower arm you can transfer particularly high torque. Due to the special surface treatment, the blades receive a high level of corrosion protection. The optimum fitting accuracy of the screw is also guaranteed. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Including useful rack for well-arranged storage of the screwdrivers. ds: dsc: Scope of delivery 454/10 HF Set Imperial 1 screwdiver set T-handle screwdrivers Hex-Plus with holding function, Imperial, 10 pieces 2x 454 Imperial T-handle hexagon screwdriver Hex-Plus, imperial: 3/32"x150 mm, 7/64"x150 mm 8x 454 HF T-handle hexagon screwdriver Hex-Plus with holding function, imperial: 1/8"x150 mm, 9/64"x150 mm, 5/32"x150 mm, 3/16"x150 mm, 7/32"x150 mm, 1/4"x150 mm, 5/16"x150 mm, 3/8"x150 mm 2x Rack for Kraftform screwdrivers: 190 x 50 mm kts: screwdriver set T-handle screwdriver Hex-Plus with grip function dimples 10-piece kpn: 454/10 HF Set Imperial 1 kpn_dash: kpn_clear: 45410HFSetImperial1 bkpn: WERA 454/10 HF Set Imperial 1 bkpn_clear: WERA 45410HFSetImperial1 c_path: Home / Tools / Hand tools / Keys / Sets / Pin key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera pin key set | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05023451001 sr_ns: WERA05023451001
r: 87990305 p: 18.016 pid: 74712 b: WERA q: 0 st: lt: 11 ean: 4013288104045 sr: WERA 05052490001 sr_no_br: 05052490001 sr_no_br_cl: 05052490001 sr_cl: WERA05052490001 sr_dash: sold: 504.448 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Connection size (machine) 1/4" Connection type (machine) Outer hexagon With lock Yes Magnetic Yes Length 57 mm n: WERA 887/4 RR Rapidaptor universal bit holder with ring magnet, 1/4" x 57 mm - 05052490001 cn: BIT HOLDER cn2: BIT HOLDER cn_clear: BITHOLDER d: Product description Rapidaptor universal holder for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). The floating, fast-rotating magnet sleeve holds even long and heavy screws firmly. The Rapidaptor allows mounting the bits without using the sleeve. The bit is removed by simply pushing it forward - for lightning-fast bit changes, even with just one hand. 1/4" hexagonal, suitable for machine use with mounting as per DIN ISO 1173-F 6.3. Rapidaptor technology for rapid bit change Rapidaptor universal holder with ring magnet for bits with 1/4" hexagon drive Ring magnet and stop sleeve for secure fit of the screw on the holder 1/4" hexagon drive Application Suitable for 1/4" DIN ISO 1173-C 6,3 and E 6,3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all, and single-hand technology, with ring magnet and stop sleeve for secure screwdriving on the holder Drive 1/4" hexagon suitable for power tools with DIN ISO 1173-F 6,3 receiver Features and benefits Special design powerful ring magnet, for larger and heavier screws. Ideal for overhead work, too. The floating, free-turning magnetic sleeve securely holds even large and heavy screws to enable immediate application. There is no need to hold the screw when applying the tool - something which can be dangerous and painful. Also ideal for overhead work. Rapid bit change without needing any additional tools. One-hand operation with a freely spinning sleeve for simplified guidance of the tool. Also available in a BiTorsion design. The free-turning sleeve allows screw steadying at the start of the screwdriving process. This makes it easier to apply the tool to the screw and prevents slipping. It can also be used as a short extension for 1/4" applications e.g. in combination with the Wera Zyklop Ratchets. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery 887/4 RR Rapidaptor Universal Bit Holder with ring magnet, 1/4" x 57 mm kts: Rapidaptor universal bit holder with ring magnet, 1/4" x 57 mm kpn: 887/4 RR kpn_dash: kpn_clear: 8874RR bkpn: WERA 887/4 RR bkpn_clear: WERA 8874RR c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Bit holder | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera bit holder sr_no_br_cl_ns: 05052490001 sr_ns: WERA05052490001
r: 03061477 p: 27.933 pid: 31325 b: WERA q: 2 st: 1 lt: 1 ean: 4013288211729 sr: WERA 05020100001 sr_no_br: 05020100001 sr_no_br_cl: 05020100001 sr_cl: WERA05020100001 sr_dash: sold: 502.794 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 1 10 mm Length 154 mm Non-sparking No VDE approved No With safety colour code 1000V Surface treatment Chrome plated Width across flats 2 13 mm Product Range Wera Joker n: WERA 6004 Joker S self-adjusting spanner, 10-13 x 7/16-1/2" x 154 mm - 05020100001 cn: OPEN-ENDED SPANNER cn2: OPEN-ENDED SPANNER cn_clear: OPENENDEDSPANNER d: Product description Many users wish to have a universal screwdriving tool with the widest possible range of applications. It should be a single tool for multiple metric and imperial dimensions. It should automatically adjust to the different screw sizes. It should be safe to grab without damaging anything and should allow for high working speeds. With its continuous and parallel jaws the Joker 6004 replaces several single spanner sizes. The required size is automatically and continuously set when attaching the tool to the hexagon bolt or screw. The integrated lever mechanism securely clamps the hexagon screw or bolt between the jaws, which significantly reduces the risk of slippage or damage. The ratchet feature ensures fast and consistent screwdriving without removing the tool. By using the corner-width rectangular prisms, a back-pivoting angle of only 30° can be achieved. The single-arm design, in conjunction with the ratchet feature and the corner-width prism, makes it possible to work even in confined spaces. The adjustable Joker 6004 is the universal screwdriving tool. Self-setting. Gripping. Spanning. For hexagon screw heads and bolts with wrench sizes 10.0; 11.0; 12.0; 13.0 (metric) For hexagon screw heads and bolts with wrench sizes 7/16"; 1/2" (imperial) Automatically and continuously gripping hexagon screws and bolts Lever mechanism upon gripping prevents slipping and damage With mechanical ratchet functionality for fast and consistent screwdriving without removing the spanner Application Hexagon screw heads and bolts with wrench size 10,0; 11,0; 12,0; 13,0 (metric) and 7/16"; 1/2" (imperial) Design Self-setting spanner with ratchet function; size-adjustable open end side, parallel smooth jaws; with 30° return angle due to the corner-width rectangular prisms in the open end; hole for hanging Features and benefits With its automatically and continuously gripping parallel jaws the Joker spanner 6004 covers all dimensions in the respective field of application. The tool automatically finds the required size when placed on the bolt or screw, no setting required. The parallel smooth jaws of the Joker 6004 allow surface pressure and can thus prevent rounding of the bolt or screw head, which can occur during power transmission via the corners. The ratchet feature in the jaw ensures fast and consistent screwdriving without removing the tool. The corner-width rectangular prisms in the jaw allow a return angle of only 30°. Thanks to its hole the Joker can be neatly hung on the workshop wall. ds: dsc: Scope of delivery 6004 Joker S Self-setting spanner, 10; 11; 12; 13 x 7/16; 1/2" x 154 mm kts: self-adjusting spanner, 10-13 x 7/16-1/2" x 154 mm kpn: 6004 Joker S kpn_dash: kpn_clear: 6004JokerS bkpn: WERA 6004 Joker S bkpn_clear: WERA 6004JokerS c_path: Home / Tools / Hand tools / Keys / Keys / Open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera open-ended spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020100001 sr_ns: WERA05020100001
r: 03226449 p: 27.933 pid: 71409 b: WERA q: 0 st: lt: 7 ean: 4013288120991 sr: WERA 05347735002 sr_no_br: 05347735002 sr_no_br_cl: 05347735002 sr_cl: WERA05347735002 sr_dash: sold: 502.794 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 3 Product Range Wera Kraftform n: WERA 335/350/355/3 screwdriver set Kraftform Plus with 300 mm long blades 3-piece - 05347735002 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 3-piece screwdriver set with Kraftform Plus handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Take it easy Tool Finder with colour coding according to sizes. Screwdrivers for slotted and cross-recess Phillips and Pozidriv screws Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Extra-long blade for low-lying working situations. Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted, Phillips and Pozidriv screws Content 3-piece set Features and benefits Extra-long blade for low-lying working situations. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 335/350/355/3 Screwdriver set Kraftform Plus 300 mm-long blades, 3 pieces 1x 335 Screwdriver for slotted screws: 1 x 5.5 x 300 mm 1x 350 PH Screwdriver for Phillips screws: PH 2 x 300 mm 1x 355 PZ Screwdriver for Pozidriv screws: PZ 2 x 300 mm kts: screwdriver set Kraftform Plus with 300 mm long blades 3-piece kpn: 335/350/355/3 kpn_dash: kpn_clear: 3353503553 bkpn: WERA 335/350/355/3 bkpn_clear: WERA 3353503553 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05347735002 sr_ns: WERA05347735002
r: 41070398 p: 15.537 pid: 72454 b: WERA q: 13 st: 1 lt: 1 ean: 4013288018052 sr: WERA 05018270001 sr_no_br: 05018270001 sr_no_br_cl: 05018270001 sr_cl: WERA05018270001 sr_dash: sold: 497.184 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 10 mm Blade length 175 mm Blade thickness 1,6 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 932 A saw-cut screwdriver, 1.6 x 10 x 175 mm - 05018270001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera chiseldriver for screwdriving, chiseling, mortising and slackening stuck screws. With multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The pound-thru hexagonal blade made of premium bit material ensures power transmission without loss even at hammer blows. Tough tempered material to prevent the blade from splintering or breaking. With integrated impact cap to increase service life and reduce risk of splintering. Higher torques can be transmitted with open-end or ring spanners using the integrated hexagon bolster. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. With hexagon anti-roll protection to avoid bits from rolling away annoyingly in the workplace. Chiseldriver for fastening, chiselling and loosening Hexagonal blade extending through the handle Multi-component Kraftform handle for fast and ergonomic screwdriving Impact cap and bolster for the transfer of higher torque The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Slotted screws Blade Hexagonal throughout with impact cap, hexagonal bolster from 0.8 x 4.5 Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, sizes 2.0 x 12.0, 2.5 x 14.0: Kraftform with non-roll feature, single-component Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 932 A Screwdriver for slotted screws, 1.6 x 10 x 175 mm kts: saw-cut screwdriver, 1.6 x 10 x 175 mm kpn: 932 A kpn_dash: kpn_clear: 932A bkpn: WERA 932 A bkpn_clear: WERA 932A c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05018270001 sr_ns: WERA05018270001
r: 87010153 p: 6.1 pid: 71493 b: WERA q: 1 st: 1 lt: 1 ean: 4013288012906 sr: WERA 05059605001 sr_no_br: 05059605001 sr_no_br_cl: 05059605001 sr_cl: WERA05059605001 sr_dash: sold: 494.1 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 50 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 3 mm Drive profile size (bit) 3 mm Product Range Wera Hex-Plus n: WERA 840/4 Z Hex-Plus hexagon bit, 3 x 50 mm - 05059605001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z bits, 3 x 50 mm kts: hexagon bit, 3 x 50 mm kpn: 840/4 Z Hex-Plus kpn_dash: 840/4 Z Hex kpn_clear: 8404ZHexPlus bkpn: WERA 840/4 Z Hex-Plus bkpn_clear: WERA 8404ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05059605001 sr_ns: WERA05059605001
r: 02811441 p: 25.95 pid: 44230 b: WERA q: 0 st: lt: 14 ean: 4013288183903 sr: WERA 05020065001 sr_no_br: 05020065001 sr_no_br_cl: 05020065001 sr_cl: WERA05020065001 sr_dash: sold: 493.05 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 10 mm Overall length 159 mm Product Range Wera Joker n: WERA 6001 Joker Switch socket and ring spanner, switchable, 10 x 159 mm - 05020065001 cn: RATCHET COMBINATION SPANNER cn2: RATCHET COMBINATION SPANNER cn_clear: RATCHETCOMBINATIONSPANNER d: Product description Joker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bolt head downwards and enables higher torque to be applied. The exchangeable metal plate in the jaw securely holds nuts and bolts with its extra hard teeth and reduces the risk of slipping. The double-hex geometry delivers a very positive connection with nuts or bolts and again provides for a lower risk of any slipping. The low return angle of only 30° at the jaw end avoids any time-consuming flipping of the wrench when fastening. The reversible ratchet mechanism at the ring end with its fine toothing (80 teeth) ensures great flexibility even in confined spaces. Audibly precise ratchet mechanism. Additionally, the robust two-piece locking element provides for an extreme stability. Comes with a 15° tilted ratchet end for secure work even at high torque. The special forged geometry allows for high torque transfer and high flexural rigidity. Manufactured out of high-performance chrome-molybdenum steel with a nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding according to size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping Very fine toothing and robust locking element Ratchet end tilted by 15° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench, switch lever for convenient change of direction; ring end tilted at 15° from the handle Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. The direction of the fine-tooth ratchet mechanism can easily be changed via the smooth switch lever. The ratchet end is tilted at 15° to the tool axis, making application of the tool in confined spaces much easier. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6001 Joker Switch Ratcheting combination wrench, with switch lever, 10 x 159 mm kts: socket and ring spanner, switchable, 10 x 159 mm kpn: 6001 Joker Switch kpn_dash: kpn_clear: 6001JokerSwitch bkpn: WERA 6001 Joker Switch bkpn_clear: WERA 6001JokerSwitch c_path: Home / Tools / Hand tools / Keys / Keys / Ratchet combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratchet combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020065001 sr_ns: WERA05020065001
r: 02813904 p: 24.628 pid: 17586 b: WERA q: 0 st: lt: 13 ean: 4013288158635 sr: WERA 05073890001 sr_no_br: 05073890001 sr_no_br_cl: 05073890001 sr_cl: WERA05073890001 sr_dash: sold: 492.56 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Mixed; Phillips; Pozidriv; Torx ESD No VDE approved No Quantity per set 6 Product Range Wera Bit-Check n: WERA Bit-Check 6 Impaktor 1 SB screwdriver bit set 6-piece - 05073890001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description 6 Wera Impaktor bits in a length of 50 mm tidily arranged in a minimum of space in a practical Bit-Check. The Impaktor technology offers an above-average service life even under extreme circumstances thanks to the best possible utilisation of the material properties and the optimised geometry. The bit tip is coated with tiny diamond particles; this reduces the risk of any slipping out of the screw head thanks to the enhanced frictional resistance. Upright positionable, multi-component Bit-Check Impaktor technology for above-average service life Particularly suitable for use with customary impact drivers Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out Take it easy tool finder: colour coding according to profile and size 6 Impaktor bits. The Take it easy Bit-Checks have bits with a sleeve which - from its colour and size designation - make it simple to access the right bit quickly. Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. For use with impact screwdrivers. Improve productivity when screwdriving with power tools. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. For an above-average service life. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Another product advantage is the coating of the Impaktor bits with minute diamond particles. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. Torsion zone specially designed to absorb such forces and thereby protect the bit tip. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. The combination of the double torsion zones in the Impaktor holder and the torsion zone in the Impaktor bit results in the so-called TriTorsion system. The Take it easy Bit-Checks have bits with a sleeve which - from its colour (e.g. red = Phillips) and size designation - make it simple to access the right bit quickly. ds: dsc: Scope of delivery Bit-Check 6 Impaktor 1 SB, 6 pieces 2x 851/4 IMP DC Impaktor bits: PH 2x50 mm, PH 3x50 mm 2x 855/4 IMP DC Impaktor bits: PZ 2x50 mm, PZ 3x50 mm 2x 867/4 IMP DC Impaktor TORX® bits: TX 25x50 mm, TX 30x50 mm kts: screwdriver bit set 6-piece kpn: Bit-Check 6 Impaktor 1 SB kpn_dash: Bit kpn_clear: BitCheck6Impaktor1SB bkpn: WERA Bit-Check 6 Impaktor 1 SB bkpn_clear: WERA BitCheck6Impaktor1SB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05073890001 sr_ns: WERA05073890001
r: 02835983 p: 244.958 pid: 42161 b: WERA q: 0 st: lt: 12 ean: 4013288161383 sr: WERA 05350451001 sr_no_br: 05350451001 sr_no_br_cl: 05350451001 sr_cl: WERA05350451001 sr_dash: sold: 489.916 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Adjustable torque range 2,5-55 Nm Min. tightening torque 2,5 Nm Max. tightening torque 55 Nm Supplied in Case Product Range Wera Kraftform n: WERA 7445/46/47 Kraftform torque screwdriver set 2.5-55.0 in.lbs. 27-piece - 05350451001 cn: TORQUE SCREWDRIVER SET cn2: TORQUE SCREWDRIVER SET cn_clear: TORQUESCREWDRIVERSET d: Product description Wera torque screwdriver set. Two high precision torque screwdrivers with variable torque settings. One torque screwdriver with Kraftform pistol handle for the transfer of especially high torque; multi-component for high working speeds and particularly ergonomic screwdriving. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Includes a bit assortment in a high quality and stable plastic case. Kraftform torque screwdriver set Suitable for bits with 1/4" hex head drive With Hex-Plus, TORX® and TORX PLUS® bits Features and benefits Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. Simple setting of the required torque by hand. Easy-to-read scale value. Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. ds: dsc: Scope of delivery 7445/46/47 Kraftform torque screwdriver set 2.5-55.0 in.lbs., 27 pieces 2x Series 7400 Kraftform adjustable torque screwdrivers (2.5-29.0 in. lbs.) with Rapidaptor quick-release chuck: 7445x2.5-11.5 in. lbs., 7446x11-29 in. lbs. 1x Series 7400 Kraftform pistol handle, adjustable torque screwdrivers (25.0-55.0 in. lbs.) with Rapidaptor quick-release chuck: 7447 x 25-55 in. lbs. 9x 867/1 TZ TORX® bits: TX 6x25 mm, TX 7x25 mm, TX 8x25 mm, TX 9x25 mm, TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm 9x 867/1 IP TORX PLUS® bits: 6 IPx25 mm, 7 IPx25 mm, 8 IPx25 mm, 9 IPx25 mm, 10 IPx25 mm, 15 IPx25 mm, 20 IPx25 mm, 25 IPx25 mm, 30 IPx25 mm 6x 840/1 Z bits: 2x25 mm, 2.5x25 mm, 3x25 mm, 4x25 mm, 5x25 mm, 6x25 mm kts: Kraftform torque screwdriver set 2.5-55.0 in.lbs. 27-piece kpn: 7445/46/47 kpn_dash: kpn_clear: 74454647 bkpn: WERA 7445/46/47 bkpn_clear: WERA 74454647 c_path: Home / Tools / Hand tools / Torque tools / Sets / Torque screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera sets / Wera torque screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05350451001 sr_ns: WERA05350451001
r: 03226637 p: 28.76 pid: 71461 b: WERA q: 0 st: lt: 8 ean: 4013288214317 sr: WERA 05006470001 sr_no_br: 05006470001 sr_no_br_cl: 05006470001 sr_cl: WERA05006470001 sr_dash: sold: 488.92 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive type Pozidriv/Slotted VDE approved Yes With safety colour code 1000V No Quantity per set 2 Product Range Wera Kraftform n: WERA 165 iS PZ/S 1 + 2 screwdriver set Kraftform Plus series 100 with reduced blade diameter 2-piece - 05006470001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description Wera VDE screwdrivers with multi-component Kraftform Plus handle for fast and low-fatigue working: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Combination profile - slotted and Pozidriv* particularly for jobs on terminal blocks, fuse boxes, switches and relays. Individually tested in water bath at 10,000 volts for secure work at the permissible voltage of 1,000 volts. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Reduced shaft diameter: combination profile - Pozidriv/slotted Kraftform: The security screwdriver. With reduced blade diameter Application Combination profile Pozidriv/slotted Design 2-piece set in a box Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. Our screwdrivers are tested for dielectric strength under a 10,000 volt load to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces - resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. All Kraftform screwdrivers have a non-roll feature at the lower end of the handle. The hexagonal design prevents any annoying rolling away of the screwdriver at the workplace. ds: dsc: Scope of delivery 165 iS PZ/S # 1 + 2 Screwdriver set Kraftform Plus series 100. With reduced blade diameter, 2 pieces 2x 165 iS PZ/S VDE Insulated screwdriver with reduced blade diameter for PlusMinus screws (Pozidriv/slotted): # 1x80 mm, # 2x100 mm kts: screwdriver set Kraftform Plus series 100 with reduced blade diameter 2-piece kpn: 165 iS PZ/S # 1 + 2 kpn_dash: kpn_clear: 165iSPZS12 bkpn: WERA 165 iS PZ/S # 1 + 2 bkpn_clear: WERA 165iSPZS12 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05006470001 sr_ns: WERA05006470001
r: 03324526 p: 40.33 pid: 70675 b: WERA q: 0 st: lt: 9 ean: 4013288224477 sr: WERA 05022699001 sr_no_br: 05022699001 sr_no_br_cl: 05022699001 sr_cl: WERA05022699001 sr_dash: sold: 483.96 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Min. width across flats 1,5 mm Max. width across flats 10 mm With ball head Yes Supplied in Plastic holder Quantity per set 9 Product Range Wera Hex-Plus n: WERA 3950/9 Hex-Plus Multicolour HF Stainless 1 spanner set, metric, stainless steel, with hold function 9-piece - 05022699001 cn: HEX KEY SET cn2: HEX KEY SET cn_clear: HEXKEYSET d: Product description Premium stainless steel Wera L-keys for hexagonal socket screws. Stainless steel prevents transmission of extraneous rust. The Hex-Plus profile offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. With hexagonal ball tip at the long arm: The ball-shaped tip profiles enable the tool shaft to be moved and pivoted relative to the screw axis which allows screwdriving "around the corner". From size 3.0 with holding function for hexagonal socket screws on the long arm. Take it easy tool finder with colour coding by size. In a nearly wear-free L-key clip. Solution to the extraneous rust problem: fasten stainless screws with stainless tools Stainless L-keys prevent extraneous rust on stainless screws Hex-Plus allows socket head screws to live longer From size 3.0, the holding function on the long arm will hold screws securely on the tool The ball head on the long arm also allows offset use 9-piece set, in a 2-component clip Application Hexagonal socket screws Design Stainless steel, with convenient colour-coded sleeve. All L-keys are easily accessible due to their colour coding and size markings. Tip Hex-Plus, hexagon ball head on the long arm, from size 3.0 with holding function for hexagonal socket screws on the long arm Features and benefits Stainless L-keys are hardened to the same strength as conventional (carbon) steel tools, and prevent extraenous rust forming. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The clamping of the screw is achieved by a flexible locking ball. The holding function is especially helpful in confined, hard-to-reach spaces, where there is no room for a second hand to secure the screw on the tool. The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. L-keys with a thermoplastic sleeve are manufactured out of easy-to-grip, circular material. The sleeve ensures that work is safe and comfortable even at low temperatures. High corrosion protection features thanks to the special BlackLaser surface treatment. Colour coding and large stamp to enable the desired L-key to be easily located. The wear-resistant clip material ensures that the L-keys are securely held yet are easy to remove. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 3950/9 Hex-Plus Multicolour HF Stainless 1 L-key set, metric, stainless steel, with holding function, 9 pieces 3x 3950 SPKL Multicolour L-key, metric, stainless: 1.5x90 mm, 2x101 mm, 2.5x112 mm 6x 3950 SPKL Multicolour HF L-key, metric, stainless steel, with holding function: 3x123 mm, 4x137 mm, 5x154 mm, 6x172 mm, 8x195 mm, 10x224 mm kts: Multicolour HF Stainless 1 spanner set, metric, stainless steel, with hold function 9-piece kpn: 3950/9 Hex-Plus kpn_dash: 3950/9 Hex kpn_clear: 39509HexPlus bkpn: WERA 3950/9 Hex-Plus bkpn_clear: WERA 39509HexPlus c_path: Home / Tools / Hand tools / Keys / Sets / Hex key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera hex key set | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05022699001 sr_ns: WERA05022699001
r: 02818279 p: 34.545 pid: 44492 b: WERA q: 0 st: lt: 13 ean: 4013288184740 sr: WERA 05020072001 sr_no_br: 05020072001 sr_no_br_cl: 05020072001 sr_cl: WERA05020072001 sr_dash: sold: 483.63 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 17 mm Overall length 225 mm Product Range Wera Joker n: WERA 6001 Joker Switch socket and ratchet spanner, switchable, 17 x 225 mm - 05020072001 cn: RATCHET COMBINATION SPANNER cn2: RATCHET COMBINATION SPANNER cn_clear: RATCHETCOMBINATIONSPANNER d: Product description Joker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bolt head downwards and enables higher torque to be applied. The exchangeable metal plate in the jaw securely holds nuts and bolts with its extra hard teeth and reduces the risk of slipping. The double-hex geometry delivers a very positive connection with nuts or bolts and again provides for a lower risk of any slipping. The low return angle of only 30° at the jaw end avoids any time-consuming flipping of the wrench when fastening. The reversible ratchet mechanism at the ring end with its fine toothing (80 teeth) ensures great flexibility even in confined spaces. Audibly precise ratchet mechanism. Additionally, the robust two-piece locking element provides for an extreme stability. Comes with a 15° tilted ratchet end for secure work even at high torque. The special forged geometry allows for high torque transfer and high flexural rigidity. Manufactured out of high-performance chrome-molybdenum steel with a nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding according to size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping Very fine toothing and robust locking element Ratchet end tilted by 15° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench, switch lever for convenient change of direction; ring end tilted at 15° from the handle Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. The direction of the fine-tooth ratchet mechanism can easily be changed via the smooth switch lever. The ratchet end is tilted at 15° to the tool axis, making application of the tool in confined spaces much easier. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6001 Joker Switch Ratcheting combination wrench, with switch lever, 17 x 225 mm kts: socket and ratchet spanner, switchable, 17 x 225 mm kpn: 6001 Joker Switch kpn_dash: kpn_clear: 6001JokerSwitch bkpn: WERA 6001 Joker Switch bkpn_clear: WERA 6001JokerSwitch c_path: Home / Tools / Hand tools / Keys / Keys / Ratchet combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratchet combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020072001 sr_ns: WERA05020072001
r: 41070366 p: 12.727 pid: 70432 b: WERA q: 12 st: 1 lt: 1 ean: 4013288004819 sr: WERA 05029415001 sr_no_br: 05029415001 sr_no_br_cl: 05029415001 sr_cl: WERA05029415001 sr_dash: sold: 483.626 p_range: none type: standard act: 1 avo: 1 av: Width across flats 8 mm With safety colour code 1000V ESD No Handle type Screwdriver handle Overall length 230 mm Blade length 125 mm VDE approved No n: WERA 395 cap screwdriver 8.0 x 125 mm - 05029415001 cn: NUT DRIVER cn2: NUT DRIVER cn_clear: NUTDRIVER d: Product description High quality nutsetter by Wera. Multi-component Kraftform handle for high working speeds and particularly ergonomic screwdriving. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Hexagonal anti-roll feature prevents any rolling away and handle markings make for simplified finding and sorting of the tool; for hexagon head screws. Nutsetter for hexagon head screws Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Chrome-plated Application Hexagon headed bolts, screws and nuts Blade Round Design Chrome-plated, nutdriver for hexagon head bolts Handle Kraftform with non-roll feature, multi-component Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. ds: dsc: Scope of delivery 395 Nutdriver, 8 x 125 mm kts: cap screwdriver 8.0 x 125 mm kpn: 395 kpn_dash: kpn_clear: 395 bkpn: WERA 395 bkpn_clear: WERA 395 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Nut driver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera nut driver sr_no_br_cl_ns: 05029415001 sr_ns: WERA05029415001
r: 87010180 p: 9.752 pid: 70768 b: WERA q: 15 st: 1 lt: 1 ean: 4013288016683 sr: WERA 05060225001 sr_no_br: 05060225001 sr_no_br_cl: 05060225001 sr_cl: WERA05060225001 sr_dash: sold: 477.848 p_range: none type: standard act: 1 avo: 1 av: Shank size 1/4 inch Socket size 8 mm Type of drive profile (socket) Hexagonal Shank type Outer hexagon Length 65 mm n: WERA 869/4 M cap bit magnetic 8 x 65 mm - 05060225001 cn: NUT SETTER cn2: NUT SETTER cn_clear: NUTSETTER d: Product description Metric nutsetter for hexagon head screws. Comes with a strong permanent magnet. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Nutsetter for hexagon head screws Metric Strong permanent magnet 1/4" hexagon drive Application Hexagon headed bolts, screws and nuts Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Strong permanent magnet Features and benefits Nutsetters, magnetic, for easier application of the screw. ds: dsc: Scope of delivery 869/4 M Nutsetters, magnetic, 8 x 65 mm kts: cap bit magnetic 8 x 65 mm kpn: 869/4 M kpn_dash: kpn_clear: 8694M bkpn: WERA 869/4 M bkpn_clear: WERA 8694M c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Nut setter | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera nut setter sr_no_br_cl_ns: 05060225001 sr_ns: WERA05060225001
r: 02824974 p: 10.36 pid: 45657 b: WERA q: 0 st: lt: 14 ean: 4013288030511 sr: WERA 05060185001 sr_no_br: 05060185001 sr_no_br_cl: 05060185001 sr_cl: WERA05060185001 sr_dash: sold: 476.56 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 8 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T8 n: WERA 867/4 Z TORX bit, TX 8 x 89 mm - 05060185001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for TORX® socket screws. Tough, for universal use. 1/4" hexagonal, suitable for bitholding screwdrivers as per DIN ISO 1173-F 6.3. For recessed TORX® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 Z TORX® bits, TX 8 x 89 mm kts: bit, TX 8 x 89 mm kpn: 867/4 Z TORX kpn_dash: kpn_clear: 8674ZTORX bkpn: WERA 867/4 Z TORX bkpn_clear: WERA 8674ZTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05060185001 sr_ns: WERA05060185001
r: 02829029 p: 52.851 pid: 42626 b: WERA q: 0 st: lt: 8 ean: 4013288138514 sr: WERA 05072447001 sr_no_br: 05072447001 sr_no_br_cl: 05072447001 sr_cl: WERA05072447001 sr_dash: sold: 475.659 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 15 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T15 Quantity per box 100 n: WERA 867/1 TORX DIY 100 SiS bits, TX 15 x 25 mm (100 pcs) - 05072447001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX® screws. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For recessed TORX® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design For universal use Features and benefits ds: dsc: Scope of delivery 867/1 TORX® DIY 100, TX 15 x 25 mm, 100 pieces 100x 867/1 TORX® bits: TX 15 x 25 mm kts: bits, TX 15 x 25 mm (100 pcs) kpn: 867/1 TORX DIY 100 SiS kpn_dash: kpn_clear: 8671TORXDIY100SiS bkpn: WERA 867/1 TORX DIY 100 SiS bkpn_clear: WERA 8671TORXDIY100SiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05072447001 sr_ns: WERA05072447001
r: 02102794 p: 11.59 pid: 44416 b: WERA q: 0 st: lt: 14 ean: 4013288102591 sr: WERA 05059896001 sr_no_br: 05059896001 sr_no_br_cl: 05059896001 sr_cl: WERA05059896001 sr_dash: sold: 475.19 p_range: none type: standard act: 1 avo: 1 av: Length 70 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Pozidriv/Slotted Connection size (bit) 1/4" VDE approved No Bit tip SL/PZ1 n: WERA 855/4 PZ/S bit, 1 x 70 mm - 05059896001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits with combination profile slotted and Pozidriv*, particularly for jobs on terminal blocks, fuse boxes, switches and relays. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. * Pozidriv = registered trademark of European Industrial Service Ltd. For PlusMinus screws (combination profile Pozidriv/slotted) Also for jobs on terminal blocks, fuse boxes, switches and relays Prevents premature breakage of the drive tip 1/4" hexagon drive (Wera connecting series 4) Application PlusMinus (Pozidriv/slotted) screws Drive 1/4" hexagon suitable for DIN ISO 1173-F 6.3 bit holders Design PlusMinus (Pozidriv/slotted), tough, ideal for electrical component adjustment jobs e.g. in sheet steel or metal Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 855/4 PZ/S PlusMinus bits, # 1 x 70 mm kts: bit, # 1 x 70 mm kpn: 855/4 PZ/S kpn_dash: kpn_clear: 8554PZS bkpn: WERA 855/4 PZ/S bkpn_clear: WERA 8554PZS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059896001 sr_ns: WERA05059896001
r: 41996655 p: 16.363 pid: 19077 b: WERA q: 0 st: lt: 8 ean: 4013288099617 sr: WERA 05051462001 sr_no_br: 05051462001 sr_no_br_cl: 05051462001 sr_cl: WERA05051462001 sr_dash: sold: 474.527 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Bit holder type Inner hexagon VDE approved No With safety colour code 1000V ESD No Non-sparking No n: WERA 816 R bit holder with Rapidaptor quick-change chuck, 1/4" x 119 mm - 05051462001 cn: BIT SCREWDRIVER cn2: BIT SCREWDRIVER cn_clear: BITSCREWDRIVER d: Product description Premium bitholding screwdriver. The Rapidaptor quick-release chuck allows for lightning-fast bit changes without any extra tools. The strong permanent magnet holds the bits firmly. Kraftform Plus handle for comfortable ergonomic screwdriving, which avoids blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Bit holder with Rapidaptor quick-release chuck for bits with 1/4" hexagon drive Multi-component Kraftform handle for fast and ergonomic screwdriving Hexagonal anti-roll feature against rolling away Rapidaptor technology for rapid change of the bits or blades Strong permanent magnet holds the bits absolutely securely Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Drive 1/4" hexagon with Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology, magnetic Handle Kraftform with non-roll feature, multi-component Features and benefits The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The free-turning sleeve allows screw steadying at the start of the screwdriving process. This makes it easier to apply the tool to the screw and prevents slipping. It can also be used as a short extension for 1/4" applications e.g. in combination with the Wera Zyklop Ratchets. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery 816 R Bitholding screwdriver with Rapidaptor quick-release chuck, 1/4" x 119 mm kts: bit holder with Rapidaptor quick-change chuck, 1/4" x 119 mm kpn: 816 R kpn_dash: kpn_clear: 816R bkpn: WERA 816 R bkpn_clear: WERA 816R c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Bit screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera bit screwdriver sr_no_br_cl_ns: 05051462001 sr_ns: WERA05051462001
r: 02951222 p: 59.173 pid: 31706 b: WERA q: 0 st: lt: 12 ean: 4013288187833 sr: WERA 05004313001 sr_no_br: 05004313001 sr_no_br_cl: 05004313001 sr_cl: WERA05004313001 sr_dash: sold: 473.384 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 11 Product Range Wera Kraftform n: WERA Kraftform 2Go 300 screwdriver set 11-piece - 05004313001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 11 Kraftform screwdrivers; with Take it easy Tool finder; in the Wera 2go 4 quiver; comes with an adjustable partition element for individual sectioning. Lasertip tips for more secure fit in the screw head Multi-component Kraftform handle for high working speeds and ergonomic screwdriving Hexagonal anti-roll feature against rolling away Suitable for docking with the Wera 2go system. Take it easy tool finder: colour coding according to profile and size 11 Kraftform screwdrivers, Series 300 for cross recess screws Phillips and Pozidriv, TORX® and slotted screws. Take it easy tool finder: colour coding according to profile and size stamp.1 dimensionally stable and robust Tool Quiver, equipped with handle for the storage and transport of tools; high resistance against cuts and stabs; comes with hook and loop fastener zone for docking with the Wera 2go system and includes 1 variably adjustable hook and loop fastener partition for a division into as many as 5 sections. Features and benefits Wera 2go 4 Tool Quiver The large set-down area improves the stability of the Tool Quiver. Its large handle means that the quiver can be easily transported or simply hung up at the workplace. The robust and dimensionally stable material is very resistant against cuts and stabs. The tools carried are protected against damage and moisture. This enhances the service life of the tool box. Thanks to its hook and loop fastener zone, the Tool Quiver can be docked with the Wera 2go 1 tool carrier and with the Wera 2go 2 tool container. The variably adjustable hook and loop fastener partition in the Tool Quiver ensures neat and tidy arrangement of the tools. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. Colour coding according to profile and size stamp. This enables faster and more reliable selection of the correct tool from the tool case. ds: dsc: Scope of delivery Kraftform 2go 300, 11 pieces 1x Wera 2go 4 Tool Quiver: 165 x 105 mm 2x 350 PH Screwdriver for Phillips screws: PH 1x80 mm, PH 2x100 mm 2x 355 PZ Screwdriver for Pozidriv screws: PZ 1x80 mm, PZ 2x100 mm 5x 367 Screwdriver for TORX® screws: TX 10x80 mm, TX 15x80 mm, TX 20x100 mm, TX 25x100 mm, TX 30x115 mm 2x 334 SK Screwdriver for slotted screws: 0.8x4.5x90 mm, 1.2x7x125 mm kts: screwdriver set 11-piece kpn: Kraftform 2Go 300 kpn_dash: kpn_clear: Kraftform2Go300 bkpn: WERA Kraftform 2Go 300 bkpn_clear: WERA Kraftform2Go300 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05004313001 sr_ns: WERA05004313001
r: 02830888 p: 29.586 pid: 42447 b: WERA q: 0 st: lt: 12 ean: 4013288028891 sr: WERA 05028062001 sr_no_br: 05028062001 sr_no_br_cl: 05028062001 sr_cl: WERA05028062001 sr_dash: sold: 473.376 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive type Torx VDE approved No With safety colour code 1000V No Supplied in Storage box Quantity per set 6 Product Range Wera Kraftform n: WERA 367/6 TORX screwdriver set Kraftform Plus in holder 6-piece - 05028062001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 6-piece screwdriver set for TORX® screws. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. Take it easy Tool Finder: colour coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Includes a practical rack for tidy storage of the screwdrivers. Screwdriver for TORX® screws Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away The Wera Black Point tip offers an exact fit and optimum corrosion protection Application TORX® Content 6-piece set with Take it easy tool finder: colour coding according to profile and size stamp and rack in display carton. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The hexagonal non-roll feature prevents any rolling away at the workplace. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 367/6 TORX® Screwdriver set Kraftform Plus and rack, 6 pieces 6x 367 Screwdriver for TORX® screws: TX 10x80 mm, TX 15x80 mm, TX 20x100 mm, TX 25x100 mm, TX 30x115 mm, TX 40x130 mm kts: screwdriver set Kraftform Plus in holder 6-piece kpn: 367/6 TORX kpn_dash: kpn_clear: 3676TORX bkpn: WERA 367/6 TORX bkpn_clear: WERA 3676TORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05028062001 sr_ns: WERA05028062001
