r: 02828742 p: 8.223 pid: 42237 b: WERA q: 0 st: lt: 12 ean: 4013288033871 sr: WERA 05134669001 sr_no_br: 05134669001 sr_no_br_cl: 05134669001 sr_cl: WERA05134669001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 9 Blade thickness Type of drive profile (bit) Torx Plus Connection size (bit) 1/4" VDE approved No Bit tip IP9 n: WERA 867/4 IP TORX PLUS bit, 9 IP x 89 mm - 05134669001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX PLUS® screws. TORX PLUS® profile: in comparison to normal TORX® profiles, the enlargement of the 6 torque-transferring flanks between the tool and the screw is effected by means of an ellipse-shaped profile design and not a circular one. This means that the power applied when screwdriving is spread over a larger area. Higher torque is transferred and the service life of the screw and tool is also enhanced. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For TORX PLUS® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX PLUS® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Compared with the "normal" TORX® profile, the elliptical instead of circular profile enlarges the 6 flanks that transfer torque between the tool and the screw. This means that the force applied when screwdriving is spread across a larger surface area. Higher torque is transferred and, in addition, the service life of the screw and tool are lengthened. The so-called centre-lock screws on cutting tools represent a typical use of this type of screw profile. The thermal influences on such holders for carbide insert tips often "bake" the retaining screws so firmly that it is important to have a profile that considerably enhances the loosening torque capability of the screws. For this reason a torque-stable screw profile is necessary to avoid any possible damage to the screw and to exclude the possibility of an otherwise costly machine downtime. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 IP TORX PLUS® bits, 9 IP x 89 mm kts: bit, 9 IP x 89 mm kpn: 867/4 IP TORX PLUS kpn_dash: kpn_clear: 8674IPTORXPLUS bkpn: WERA 867/4 IP TORX PLUS bkpn_clear: WERA 8674IPTORXPLUS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05134669001 sr_ns: WERA05134669001
r: 02828736 p: 8.223 pid: 42511 b: WERA q: 0 st: lt: 12 ean: 4013288032812 sr: WERA 05134670001 sr_no_br: 05134670001 sr_no_br_cl: 05134670001 sr_cl: WERA05134670001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 8 Blade thickness Type of drive profile (bit) Torx Plus Connection size (bit) 1/4" VDE approved No Bit tip IP8 n: WERA 867/4 IP TORX PLUS bit, 8 IP x 89 mm - 05134670001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX PLUS® screws. TORX PLUS® profile: in comparison to normal TORX® profiles, the enlargement of the 6 torque-transferring flanks between the tool and the screw is effected by means of an ellipse-shaped profile design and not a circular one. This means that the power applied when screwdriving is spread over a larger area. Higher torque is transferred and the service life of the screw and tool is also enhanced. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For TORX PLUS® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX PLUS® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Compared with the "normal" TORX® profile, the elliptical instead of circular profile enlarges the 6 flanks that transfer torque between the tool and the screw. This means that the force applied when screwdriving is spread across a larger surface area. Higher torque is transferred and, in addition, the service life of the screw and tool are lengthened. The so-called centre-lock screws on cutting tools represent a typical use of this type of screw profile. The thermal influences on such holders for carbide insert tips often "bake" the retaining screws so firmly that it is important to have a profile that considerably enhances the loosening torque capability of the screws. For this reason a torque-stable screw profile is necessary to avoid any possible damage to the screw and to exclude the possibility of an otherwise costly machine downtime. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 IP TORX PLUS® bits, 8 IP x 89 mm kts: bit, 8 IP x 89 mm kpn: 867/4 IP TORX PLUS kpn_dash: kpn_clear: 8674IPTORXPLUS bkpn: WERA 867/4 IP TORX PLUS bkpn_clear: WERA 8674IPTORXPLUS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05134670001 sr_ns: WERA05134670001
r: 08108010 p: 8.223 pid: 159582 b: WERA q: 0 st: lt: 8 ean: 4013288229496 sr: WERA 05006592001 sr_no_br: 05006592001 sr_no_br_cl: 05006592001 sr_cl: WERA05006592001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" Connection profile (bit) Hexagonal VDE approved Yes Bit tip T25 Drive profile size (bit) 25 Product Range Wera Kraftform Kompakt n: WERA 05006592001 Kraftform Kompakt VDE insert for TORX screws 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE stainless blades for Kraftform Kompakt handle/blade system. Lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Reduced blade diameter with integrated protective insulation, low-lying screw and spring elements can be easily reached and operated. Wera's stainless steel tools are vacuum ice tempered and therefore have the hardness and strength properties required for screw connections. Industrial use is possible without restrictions. With Take it easy Tool finder: Colour coding by profile and laser-engraved size indication. The hexagon anti-roll protection avoids blades from rolling away unintentionally. Kraftform Kompakt VDE interchangeable blade for TORX® screws Insulated, individually tested as per IEC 60900 Reduced shaft diameter and integrated insulation protection In this way, low-lying TORX® screws can be accessed and actuated Blades made of stainless steel to prevent extraneous rust Application TORX® screws Blade Reduced blade diameter with integrated protective insulation, low lying TORX® screws can be easily reached and operated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Stainless steel, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Testing the tool for dielectric strength at 10,000 volt gives the user the peace of mind that their tool has been tested for its most important property, insulation. Wera VDE tools are subjected to this test piece by piece which guarantees safe working at up to 1,000 volt. The VDE-insulated Kraftform Kompakt stainless blades are suitable for the 3817 VDE Stainless handle. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. ds: dsc: Scope of delivery Kraftform Kompakt VDE 3067 iS TORX® Take it easy SB, stainless steel, TX 25 x 157 mm kts: Kraftform Kompakt VDE insert for TORX screws 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006592001 kpn_dash: kpn_clear: 05006592001 bkpn: WERA 05006592001 bkpn_clear: WERA 05006592001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006592001 sr_ns: WERA05006592001
r: 02818551 p: 8.146 pid: 45431 b: WERA q: 0 st: lt: 12 ean: 4013288157669 sr: WERA 05057657001 sr_no_br: 05057657001 sr_no_br_cl: 05057657001 sr_cl: WERA05057657001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 3 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH3 n: WERA 851/4 IMP DC PH DIY bit, PH 3 x 50 mm - 05057657001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for Phillips screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For Phillips screws Impaktor technology for above-average service life Particularly suitable for use with customary impact drivers Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out 1/4" hexagon drive (Wera connecting series 4) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design The Impaktor technology ensures an above-average service life even under extreme conditions thanks to a best-possible utilisation of the material properties and optimally designed geometry, particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance. Take it easy tool finder: Output colour coding (red = Phillips) and large stamp to enable the desired bit to be easily located. Features and benefits For an above-average service life. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Another product advantage is the coating of the Impaktor bits with minute diamond particles. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. For use with impact screwdrivers. Improve productivity when screwdriving with power tools. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Particularly high strength. Reduce the danger of premature bit breakage. Torsion zone specially designed to absorb such forces and thereby protect the bit tip. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. Wera Impaktor bits and holders can also be used individually. However, the best results are achieved with the combination of the two tools that are optimally matched to one another. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 1x 851/4 IMP DC Impaktor Bits Phillips: PH 3 x 50 mm kts: bit, PH 3 x 50 mm kpn: 851/4 IMP DC PH DIY kpn_dash: kpn_clear: 8514IMPDCPHDIY bkpn: WERA 851/4 IMP DC PH DIY bkpn_clear: WERA 8514IMPDCPHDIY c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05057657001 sr_ns: WERA05057657001
r: 08108009 p: 8.099 pid: 159578 b: WERA q: 0 st: lt: 8 ean: 4013288229489 sr: WERA 05006591001 sr_no_br: 05006591001 sr_no_br_cl: 05006591001 sr_cl: WERA05006591001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" Connection profile (bit) Hexagonal VDE approved Yes Bit tip T20 Drive profile size (bit) 20 Product Range Wera Kraftform Kompakt n: WERA 05006591001 Kraftform Kompakt VDE insert for TORX screws 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE stainless blades for Kraftform Kompakt handle/blade system. Lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Reduced blade diameter with integrated protective insulation, low-lying screw and spring elements can be easily reached and operated. Wera's stainless steel tools are vacuum ice tempered and therefore have the hardness and strength properties required for screw connections. Industrial use is possible without restrictions. With Take it easy Tool finder: Colour coding by profile and laser-engraved size indication. The hexagon anti-roll protection avoids blades from rolling away unintentionally. Kraftform Kompakt VDE interchangeable blade for TORX® screws Insulated, individually tested as per IEC 60900 Reduced shaft diameter and integrated insulation protection In this way, low-lying TORX® screws can be accessed and actuated Blades made of stainless steel to prevent extraneous rust Application TORX® screws Blade Reduced blade diameter with integrated protective insulation, low lying TORX® screws can be easily reached and operated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Stainless steel, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Testing the tool for dielectric strength at 10,000 volt gives the user the peace of mind that their tool has been tested for its most important property, insulation. Wera VDE tools are subjected to this test piece by piece which guarantees safe working at up to 1,000 volt. The VDE-insulated Kraftform Kompakt stainless blades are suitable for the 3817 VDE Stainless handle. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. ds: dsc: Scope of delivery Kraftform Kompakt VDE 3067 iS TORX® Take it easy SB, stainless steel, TX 20 x 157 mm kts: Kraftform Kompakt VDE insert for TORX screws 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006591001 kpn_dash: kpn_clear: 05006591001 bkpn: WERA 05006591001 bkpn_clear: WERA 05006591001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006591001 sr_ns: WERA05006591001
r: 02827963 p: 8.099 pid: 46965 b: WERA q: 0 st: lt: 8 ean: 4013288033345 sr: WERA 05066690001 sr_no_br: 05066690001 sr_no_br_cl: 05066690001 sr_cl: WERA05066690001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 6 mm Blade thickness Type of drive profile (bit) Torq-set Connection size (bit) 1/4" VDE approved No Bit tip Torq-set 6 n: WERA 871/4 DC TORQ-SET Mplus bit, 6 x 50 mm - 05066690001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for TORQ-SET® screws. The stronger flanks - when compared with the conventional TORQ-SET® profile - result in 70% more breaking torque and thereby enhanced durability whilst at the same time providing a perfect fit in the screw head. The diamond coating of the bit ensures a secure fit in the screw, reduces the contact pressure required and lowers the risk of slipping. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For TORQ-SET® screws Mplus for more breaking torque and longer service life Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out 1/4" hexagon drive (Wera connecting series 4) Application TORQ-SET® screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Mplus for higher breaking torque and longer service life, diamond-coated for secure screw fit Features and benefits Wera developed the Mplus profile with stronger flanks compared with tools with a conventional TORQ-SET® profile. This results in approximately 70 % extra torsional strength and greatly extends the service life of Wera Mplus tools. The diamond coating of the DC bits lowers the danger of slipping as the minute diamond particles literally "bite" themselves into the screw head. Today, the Wera diamond bit - manufactured with the technology specifically developed by Wera for this application - still sets the standard in terms of resilience and functionality. Wera bits with a diamond coating ensure a secure fit of the bit in the screw head. The minute diamond particles applied to the tip of the tool literally "bite" into the screw and ensure an exact, anti-slip fit in the head of the screw. This secure fit protects the screw. The cam-out forces which compel the user to apply greater pressure to the screw are considerably reduced. Ideal for sensitive materials ds: dsc: Scope of delivery 871/4 DC TORQ-SET® Mplus bits, 6 x 50 mm kts: bit, 6 x 50 mm kpn: 871/4 DC TORQ-SET Mplus kpn_dash: 871/4 DC TORQ kpn_clear: 8714DCTORQSETMplus bkpn: WERA 871/4 DC TORQ-SET Mplus bkpn_clear: WERA 8714DCTORQSETMplus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066690001 sr_ns: WERA05066690001
r: 02827965 p: 8.099 pid: 45321 b: WERA q: 0 st: lt: 8 ean: 4013288033369 sr: WERA 05066694001 sr_no_br: 05066694001 sr_no_br_cl: 05066694001 sr_cl: WERA05066694001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 10 mm Blade thickness Type of drive profile (bit) Torq-set Connection size (bit) 1/4" VDE approved No Bit tip Torq-set 10 n: WERA 871/4 DC TORQ-SET Mplus bit, 10 x 50 mm - 05066694001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for TORQ-SET® screws. The stronger flanks - when compared with the conventional TORQ-SET® profile - result in 70% more breaking torque and thereby enhanced durability whilst at the same time providing a perfect fit in the screw head. The diamond coating of the bit ensures a secure fit in the screw, reduces the contact pressure required and lowers the risk of slipping. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For TORQ-SET® screws Mplus for more breaking torque and longer service life Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out 1/4" hexagon drive (Wera connecting series 4) Application TORQ-SET® screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Mplus for higher breaking torque and longer service life, diamond-coated for secure screw fit Features and benefits Wera developed the Mplus profile with stronger flanks compared with tools with a conventional TORQ-SET® profile. This results in approximately 70 % extra torsional strength and greatly extends the service life of Wera Mplus tools. The diamond coating of the DC bits lowers the danger of slipping as the minute diamond particles literally "bite" themselves into the screw head. Today, the Wera diamond bit - manufactured with the technology specifically developed by Wera for this application - still sets the standard in terms of resilience and functionality. Wera bits with a diamond coating ensure a secure fit of the bit in the screw head. The minute diamond particles applied to the tip of the tool literally "bite" into the screw and ensure an exact, anti-slip fit in the head of the screw. This secure fit protects the screw. The cam-out forces which compel the user to apply greater pressure to the screw are considerably reduced. Ideal for sensitive materials ds: dsc: Scope of delivery 871/4 DC TORQ-SET® Mplus bits, 10 x 50 mm kts: bit, 10 x 50 mm kpn: 871/4 DC TORQ-SET Mplus kpn_dash: 871/4 DC TORQ kpn_clear: 8714DCTORQSETMplus bkpn: WERA 871/4 DC TORQ-SET Mplus bkpn_clear: WERA 8714DCTORQSETMplus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066694001 sr_ns: WERA05066694001
r: 03229211 p: 8.099 pid: 71008 b: WERA q: 0 st: lt: 12 ean: 4013288213860 sr: WERA 05136308001 sr_no_br: 05136308001 sr_no_br_cl: 05136308001 sr_cl: WERA05136308001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 152 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ1 n: WERA 855/4 Z SB bit Pozidriv, PZ 1 x 152 mm - 05136308001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bit for Pozidriv screws. Tough, for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Suitable for Pozidriv screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 855/4 Z SB bits, PZ 1 x 152 mm kts: bit Pozidriv, PZ 1 x 152 mm kpn: 855/4 Z SB kpn_dash: kpn_clear: 8554ZSB bkpn: WERA 855/4 Z SB bkpn_clear: WERA 8554ZSB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05136308001 sr_ns: WERA05136308001
r: 03229456 p: 8.099 pid: 31590 b: WERA q: 0 st: lt: 10 ean: 4013288213815 sr: WERA 05136303001 sr_no_br: 05136303001 sr_no_br_cl: 05136303001 sr_cl: WERA05136303001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 152 mm Drive profile size (bit) 5 mm Blade thickness Type of drive profile (bit) Hexagon Plus Connection size (bit) 1/4" VDE approved No Bit tip HEX-Plus 5 mm n: WERA 840/4 Z SB bit, 5 x 152 mm - 05136303001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z SB bits, 5 x 152 mm kts: bit, 5 x 152 mm kpn: 840/4 Z SB kpn_dash: kpn_clear: 8404ZSB bkpn: WERA 840/4 Z SB bkpn_clear: WERA 8404ZSB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05136303001 sr_ns: WERA05136303001
r: 08108001 p: 8.099 pid: 159594 b: WERA q: 0 st: lt: 8 ean: 4013288229540 sr: WERA 05006583001 sr_no_br: 05006583001 sr_no_br_cl: 05006583001 sr_cl: WERA05006583001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" Connection profile (bit) Hexagonal VDE approved Yes Bit tip PZ2 Drive profile size (bit) 2 Product Range Wera Kraftform Kompakt n: WERA 05006583001 Kraftform Kompakt VDE insert for Pozidriv screws 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE stainless blades for Kraftform Kompakt handle/blade system. Lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Reduced blade diameter with integrated protective insulation, low-lying screw and spring elements can be easily reached and operated. Wera's stainless steel tools are vacuum ice tempered and therefore have the hardness and strength properties required for screw connections. Industrial use is possible without restrictions. With Take it easy Tool finder: Colour coding by profile and laser-engraved size indication. The hexagon anti-roll protection avoids blades from rolling away unintentionally. Kraftform Kompakt VDE interchangeable blade suitable for Pozidriv screws Insulated, individually tested as per IEC 60900 Reduced shaft diameter and integrated insulation protection In this way, low-lying PZ screws can be accessed and actuated Blades made of stainless steel to prevent extraneous rust Application Suitable for Pozidriv screws Blade Reduced blade diameter with integrated protective insulation, low lying PZ screws can be easily reached and operated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Stainless steel, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Our screwdrivers are tested for dielectric strength under a 10,000 volt load to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts. The VDE-insulated Kraftform Kompakt stainless blades are suitable for the 3817 VDE Stainless handle. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. ds: dsc: Scope of delivery Kraftform Kompakt VDE 3065 iS PZ Take it easy SB, stainless steel, PZ 2 x 157 mm kts: Kraftform Kompakt VDE insert for Pozidriv screws 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006583001 kpn_dash: kpn_clear: 05006583001 bkpn: WERA 05006583001 bkpn_clear: WERA 05006583001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006583001 sr_ns: WERA05006583001
r: 08107999 p: 8.099 pid: 159587 b: WERA q: 0 st: lt: 8 ean: 4013288229427 sr: WERA 05006581001 sr_no_br: 05006581001 sr_no_br_cl: 05006581001 sr_cl: WERA05006581001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" Connection profile (bit) Hexagonal VDE approved Yes Bit tip PH2 Drive profile size (bit) 2 Product Range Wera Kraftform Kompakt n: WERA 05006581001 Kraftform Kompakt VDE interchangeable blade for Phillips-Recess Phillips screws 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE stainless blades for Kraftform Kompakt handle/blade system. Lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Reduced blade diameter with integrated protective insulation, low-lying screw and spring elements can be easily reached and operated. Wera's stainless steel tools are vacuum ice tempered and therefore have the hardness and strength properties required for screw connections. Industrial use is possible without restrictions. With Take it easy Tool finder: Colour coding by profile and laser-engraved size indication. The hexagon anti-roll protection avoids blades from rolling away unintentionally. Kraftform Kompakt VDE interchangeable blade for cross recess screws, Phillips Insulated, individually tested as per IEC 60900 Reduced shaft diameter and integrated insulation protection In this way, low-lying PH screws can be accessed and actuated Blades made of stainless steel to prevent extraneous rust Application Phillips-head screws Phillips-Recess Blade Reduced blade diameter with integrated protective insulation, low lying PH screws can be easily reached and operated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Stainless steel, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication Features and benefits Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Our screwdrivers are tested for dielectric strength under a 10,000 volt load to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts. The VDE-insulated Kraftform Kompakt stainless blades are suitable for the 3817 VDE Stainless handle. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. ds: dsc: Scope of delivery Kraftform Kompakt VDE 3062 iS Take it easy SB, stainless steel, PH 2 x 157 mm kts: Kraftform Kompakt VDE interchangeable blade for Phillips-Recess Phillips screws 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006581001 kpn_dash: kpn_clear: 05006581001 bkpn: WERA 05006581001 bkpn_clear: WERA 05006581001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006581001 sr_ns: WERA05006581001
r: 02822392 p: 8.099 pid: 46770 b: WERA q: 0 st: lt: 12 ean: 4013288014351 sr: WERA 05065197001 sr_no_br: 05065197001 sr_no_br_cl: 05065197001 sr_cl: WERA05065197001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 44,5 mm Blade thickness Type of drive profile (bit) Phillips Connection size (bit) Nr.10 - 32 Connection profile (bit) Outer thread VDE approved No Bit tip PH2 Drive profile size (bit) 2 n: WERA 851/16 PH bit, PH 2 x 44.5 mm - 05065197001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for Phillips screws. Tough-absorbing for universal use. Threaded connector #10-32 UNF. For Phillips screws Tough for hard materials Thread drive 10-32" UNF (Wera connecting series 16) Application Phillips screws Drive Thread drive #10-32 UNF Design Tough, for universal use Features and benefits Thread drive # 10-32 UNF (Wera connecting series 16). Drive: For direct machine drive. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 851/16 Bits 10/32" NF2A, PH 2 x 44.5 mm kts: bit, PH 2 x 44.5 mm kpn: 851/16 PH kpn_dash: kpn_clear: 85116PH bkpn: WERA 851/16 PH bkpn_clear: WERA 85116PH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05065197001 sr_ns: WERA05065197001
r: 03337429 p: 7.98 pid: 159570 b: WERA q: 0 st: lt: 7 ean: 4013288228543 sr: WERA 05006512001 sr_no_br: 05006512001 sr_no_br_cl: 05006512001 sr_cl: WERA05006512001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 9 mm Connection profile (bit) Hexagonal VDE approved Yes Bit tip PH1 Drive profile size (bit) 1 Product Range Wera Kraftform Kompakt n: WERA 05006512001 Kraftform Kompakt VDE interchangeable blade for Phillips-Recess Phillips screws 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE blade for the Kraftform Kompakt handle/interchangeable blade system. Lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Reduced blade diameter with integrated protective insulation, low-lying screw and spring elements can be easily reached and operated. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. With Take it easy tool finder: colour coding by profile and laser-engraved size indication. The hexagon anti-roll protection avoids blades from rolling away unintentionally. Kraftform Kompakt VDE interchangeable blade for cross recess screws, Phillips Reduced shaft diameter and integrated insulation protection Insulated, individually tested as per IEC 60900 9 mm hex drive with with entry chamfer Black Point tip for enhanced corrosion protection and an exact fit Application Phillips-head screws Phillips-Recess Blade Reduced blade diameter with integrated protective insulation, low lying PH screws can be easily reached and operated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Burnished, Black Point tip, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Testing the tool for dielectric strength at 10,000 volt gives the user the peace of mind that their tool has been tested for its most important property, insulation. Wera VDE tools are subjected to this test piece by piece which guarantees safe working at up to 1,000 volt. The 157 mm length blades are suitable for Wera Kraftform bitholding screwdrivers 7400 VDE, 837 i RA, 827 T i and 817 VDE. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE 62 iS Take it easy, PH 1 x 157 mm kts: Kraftform Kompakt VDE interchangeable blade for Phillips-Recess Phillips screws 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006512001 kpn_dash: kpn_clear: 05006512001 bkpn: WERA 05006512001 bkpn_clear: WERA 05006512001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006512001 sr_ns: WERA05006512001
r: 03229177 p: 7.933 pid: 70056 b: WERA q: 0 st: lt: 16 ean: 4013288213839 sr: WERA 05136305001 sr_no_br: 05136305001 sr_no_br_cl: 05136305001 sr_cl: WERA05136305001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 152 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH1 n: WERA 851/4 Z SB bit Phillips, PH 1 x 152 mm - 05136305001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bit for Phillips screws. Tough, for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For Phillips screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 851/4 Z SB bits, PH 1 x 152 mm kts: bit Phillips, PH 1 x 152 mm kpn: 851/4 Z SB kpn_dash: kpn_clear: 8514ZSB bkpn: WERA 851/4 Z SB bkpn_clear: WERA 8514ZSB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05136305001 sr_ns: WERA05136305001
r: 03229178 p: 7.933 pid: 71001 b: WERA q: 0 st: lt: 16 ean: 4013288213846 sr: WERA 05136306001 sr_no_br: 05136306001 sr_no_br_cl: 05136306001 sr_cl: WERA05136306001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 152 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 n: WERA 851/4 Z SB bit Phillips, PH 2 x 152 mm - 05136306001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bit for Phillips screws. Tough, for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For Phillips screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 851/4 Z SB bits, PH 2 x 152 mm kts: bit Phillips, PH 2 x 152 mm kpn: 851/4 Z SB kpn_dash: kpn_clear: 8514ZSB bkpn: WERA 851/4 Z SB bkpn_clear: WERA 8514ZSB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05136306001 sr_ns: WERA05136306001
r: 02828327 p: 7.87 pid: 31177 b: WERA q: 0 st: lt: 12 ean: 4013288117700 sr: WERA 05073623001 sr_no_br: 05073623001 sr_no_br_cl: 05073623001 sr_cl: WERA05073623001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 25 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T25 Number per blister 1 n: WERA 3867/1 TS SB SIS TORX bit, stainless steel, TX 25 x 25 mm - 05073623001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits out of stainless steel for recessed TORX® screws. Wera stainless are made out of stainless steel which prevents the formation of unsightly extraneous rust. Come with Torsion zone: Torsion bits take-up torque peaks and absorb them in the Torsion zone. This prevents premature wear and extends the service life of the bit. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Solution to the extraneous rust problem: fasten stainless screws with stainless tools For recessed TORX® screws Torsion design against premature wear 1/4" hexagon drive (Wera connecting series 1) Take it easy tool finder: colour coding according to profile and size Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Stainless steel for minimising rust, special torsion-style design to reduce premature wear. Take it easy. tool finder: Output colour coding (green = TORX®) and large stamp to enable the desired bit to be easily located. Features and benefits Wera stainless steel bits are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel bits from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Torsion bits (T) absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 3867/1 TS SB TORX® bits, stainless, TX 25 x 25 mm kts: bit, stainless steel, TX 25 x 25 mm kpn: 3867/1 TS SB SIS TORX kpn_dash: kpn_clear: 38671TSSBSISTORX bkpn: WERA 3867/1 TS SB SIS TORX bkpn_clear: WERA 38671TSSBSISTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073623001 sr_ns: WERA05073623001
r: 02828334 p: 7.87 pid: 31154 b: WERA q: 0 st: lt: 12 ean: 4013288117724 sr: WERA 05073625001 sr_no_br: 05073625001 sr_no_br_cl: 05073625001 sr_cl: WERA05073625001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 30 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T30 Number per blister 1 n: WERA 3867/1 TS SB SIS TORX bit, stainless steel, TX 30 x 25 mm - 05073625001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits out of stainless steel for recessed TORX® screws. Wera stainless are made out of stainless steel which prevents the formation of unsightly extraneous rust. Come with Torsion zone: Torsion bits take-up torque peaks and absorb them in the Torsion zone. This prevents premature wear and extends the service life of the bit. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Solution to the extraneous rust problem: fasten stainless screws with stainless tools For recessed TORX® screws Torsion design against premature wear 1/4" hexagon drive (Wera connecting series 1) Take it easy tool finder: colour coding according to profile and size Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Stainless steel for minimising rust, special torsion-style design to reduce premature wear. Take it easy. tool finder: Output colour coding (green = TORX®) and large stamp to enable the desired bit to be easily located. Features and benefits Wera stainless steel bits are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel bits from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Torsion bits (T) absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 3867/1 TS SB TORX® bits, stainless, TX 30 x 25 mm kts: bit, stainless steel, TX 30 x 25 mm kpn: 3867/1 TS SB SIS TORX kpn_dash: kpn_clear: 38671TSSBSISTORX bkpn: WERA 3867/1 TS SB SIS TORX bkpn_clear: WERA 38671TSSBSISTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073625001 sr_ns: WERA05073625001
r: 02828312 p: 7.87 pid: 31140 b: WERA q: 0 st: lt: 12 ean: 4013288117670 sr: WERA 05073620001 sr_no_br: 05073620001 sr_no_br_cl: 05073620001 sr_cl: WERA05073620001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 10 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T10 Number per blister 1 n: WERA 3867/1 TS SB SIS TORX bit, stainless steel, TX 10 x 25 mm - 05073620001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits out of stainless steel for recessed TORX® screws. Wera stainless are made out of stainless steel which prevents the formation of unsightly extraneous rust. Come with Torsion zone: Torsion bits take-up torque peaks and absorb them in the Torsion zone. This prevents premature wear and extends the service life of the bit. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For recessed TORX® screws Stainless Steel Bits Solution to the extraneous rust problem: fasten stainless screws with stainless tools Vacuum ice-hardened Torsion design against premature wear Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Stainless steel for minimising rust, special torsion-style design to reduce premature wear. Take it easy. tool finder: Output colour coding (green = TORX®) and large stamp to enable the desired bit to be easily located. Features and benefits Wera stainless steel bits are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel bits from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Torsion bits (T) absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 3867/1 TS SB TORX® bits, stainless, TX 10 x 25 mm kts: bit, stainless steel, TX 10 x 25 mm kpn: 3867/1 TS SB SIS TORX kpn_dash: kpn_clear: 38671TSSBSISTORX bkpn: WERA 3867/1 TS SB SIS TORX bkpn_clear: WERA 38671TSSBSISTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073620001 sr_ns: WERA05073620001
r: 02828325 p: 7.87 pid: 32783 b: WERA q: 0 st: lt: 12 ean: 4013288117694 sr: WERA 05073622001 sr_no_br: 05073622001 sr_no_br_cl: 05073622001 sr_cl: WERA05073622001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 20 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T20 Number per blister 1 n: WERA 3867/1 TS SB SIS TORX bit, stainless steel, TX 20 x 25 mm - 05073622001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits out of stainless steel for recessed TORX® screws. Wera stainless are made out of stainless steel which prevents the formation of unsightly extraneous rust. Come with Torsion zone: Torsion bits take-up torque peaks and absorb them in the Torsion zone. This prevents premature wear and extends the service life of the bit. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Solution to the extraneous rust problem: fasten stainless screws with stainless tools For recessed TORX® screws Torsion design against premature wear 1/4" hexagon drive (Wera connecting series 1) Take it easy tool finder: colour coding according to profile and size Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Stainless steel for minimising rust, special torsion-style design to reduce premature wear. Take it easy. tool finder: Output colour coding (green = TORX®) and large stamp to enable the desired bit to be easily located. Features and benefits Wera stainless steel bits are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel bits from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Torsion bits (T) absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 3867/1 TS SB TORX® bits, stainless, TX 20 x 25 mm kts: bit, stainless steel, TX 20 x 25 mm kpn: 3867/1 TS SB SIS TORX kpn_dash: kpn_clear: 38671TSSBSISTORX bkpn: WERA 3867/1 TS SB SIS TORX bkpn_clear: WERA 38671TSSBSISTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073622001 sr_ns: WERA05073622001
r: 03336531 p: 7.86 pid: 159565 b: WERA q: 0 st: lt: 8 ean: 4013288228451 sr: WERA 05006503001 sr_no_br: 05006503001 sr_no_br_cl: 05006503001 sr_cl: WERA05006503001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness 0,8 mm Type of drive profile (bit) Slotted Connection size (bit) 9 mm Connection profile (bit) Hexagonal VDE approved Yes Bit tip Slotted 4 mm Drive profile size (bit) 4 mm Product Range Wera Kraftform Kompakt n: WERA 05006503001 Kraftform Kompakt VDE insert for slotted screws 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE blade for the Kraftform Kompakt handle/interchangeable blade system for lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. With anti-roll protection and Take it easy tool finder: colour coding by profile and laser-engraved size indication. Kraftform Kompakt VDE interchangeable blades for slotted screws Insulated, individually tested as per IEC 60900 9 mm hex drive with with entry chamfer Conical blade The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Slotted screws Blade Insulated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Conical cutting edge, burnished, Black Point tip, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Testing the tool for dielectric strength at 10,000 volt gives the user the peace of mind that their tool has been tested for its most important property, insulation. Wera VDE tools are subjected to this test piece by piece which guarantees safe working at up to 1,000 volt. The 157 mm length blades are suitable for Wera Kraftform bitholding screwdrivers 7400 VDE, 837 i RA, 827 T i and 817 VDE. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE 60 i Take it easy, 0.8 x 4 x 157 mm kts: Kraftform Kompakt VDE insert for slotted screws 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006503001 kpn_dash: kpn_clear: 05006503001 bkpn: WERA 05006503001 bkpn_clear: WERA 05006503001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006503001 sr_ns: WERA05006503001
