r: 08108004 p: 7.272 pid: 159585 b: WERA q: 0 st: lt: 8 ean: 4013288229458 sr: WERA 05006588001 sr_no_br: 05006588001 sr_no_br_cl: 05006588001 sr_cl: WERA05006588001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" Connection profile (bit) Hexagonal VDE approved Yes Bit tip T10 Drive profile size (bit) 10 Product Range Wera Kraftform Kompakt n: WERA 05006588001 Kraftform Kompakt VDE insert for TORX screws 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE stainless blades for Kraftform Kompakt handle/blade system. Lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Wera's stainless steel tools are vacuum ice tempered and therefore have the hardness and strength properties required for screw connections. Industrial use is possible without restrictions. With Take it easy Tool finder: Colour coding by profile and laser-engraved size indication. The hexagon anti-roll protection avoids blades from rolling away unintentionally. Kraftform Kompakt VDE interchangeable blade for TORX® screws Insulated, individually tested as per IEC 60900 Blades made of stainless steel to prevent extraneous rust Vacuum ice-hardening provides the required hardness and strength 9 mm hex drive with with entry chamfer Application TORX® screws Blade Insulated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Stainless steel, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Testing the tool for dielectric strength at 10,000 volt gives the user the peace of mind that their tool has been tested for its most important property, insulation. Wera VDE tools are subjected to this test piece by piece which guarantees safe working at up to 1,000 volt. The VDE-insulated Kraftform Kompakt stainless blades are suitable for the 3817 VDE Stainless handle. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE 3067 i TORX® Take it easy SB, stainless steel, TX 10 x 157 mm kts: Kraftform Kompakt VDE insert for TORX screws 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006588001 kpn_dash: kpn_clear: 05006588001 bkpn: WERA 05006588001 bkpn_clear: WERA 05006588001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006588001 sr_ns: WERA05006588001
r: 08108006 p: 7.272 pid: 159591 b: WERA q: 0 st: lt: 8 ean: 4013288229434 sr: WERA 05006586001 sr_no_br: 05006586001 sr_no_br_cl: 05006586001 sr_cl: WERA05006586001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" Connection profile (bit) Hexagonal VDE approved Yes Bit tip T8 Drive profile size (bit) 8 Product Range Wera Kraftform Kompakt n: WERA 05006586001 Kraftform Kompakt VDE insert for TORX screws 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE stainless blades for Kraftform Kompakt handle/blade system. Lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Wera's stainless steel tools are vacuum ice tempered and therefore have the hardness and strength properties required for screw connections. Industrial use is possible without restrictions. With Take it easy Tool finder: Colour coding by profile and laser-engraved size indication. The hexagon anti-roll protection avoids blades from rolling away unintentionally. Kraftform Kompakt VDE interchangeable blade for TORX® screws Insulated, individually tested as per IEC 60900 Blades made of stainless steel to prevent extraneous rust Vacuum ice-hardening provides the required hardness and strength 9 mm hex drive with with entry chamfer Application TORX® screws Blade Insulated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Stainless steel, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Testing the tool for dielectric strength at 10,000 volt gives the user the peace of mind that their tool has been tested for its most important property, insulation. Wera VDE tools are subjected to this test piece by piece which guarantees safe working at up to 1,000 volt. The VDE-insulated Kraftform Kompakt stainless blades are suitable for the 3817 VDE Stainless handle. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE 3067 i TORX® Take it easy SB, stainless steel, TX 8 x 157 mm kts: Kraftform Kompakt VDE insert for TORX screws 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006586001 kpn_dash: kpn_clear: 05006586001 bkpn: WERA 05006586001 bkpn_clear: WERA 05006586001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006586001 sr_ns: WERA05006586001
r: 08108046 p: 7.272 pid: 159627 b: WERA q: 0 st: lt: 8 ean: 4013288229199 sr: WERA 05006568001 sr_no_br: 05006568001 sr_no_br_cl: 05006568001 sr_cl: WERA05006568001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness Type of drive profile (bit) Pozidriv/Slotted Connection size (bit) 9 mm Connection profile (bit) Hexagonal VDE approved Yes Bit tip SL/PZ1 Drive profile size (bit) 1 Product Range Wera Kraftform Kompakt n: WERA 05006568001 Kraftform Kompakt VDE inserts for PlusMinus screws slotted/ Pozidriv 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE blade for the Kraftform Kompakt handle/interchangeable blade system. Combination profile slotted and Pozidriv, especially for use with clips, fuse boxes, switches, relays. Lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Reduced blade diameter with integrated protective insulation, low-lying screw and spring elements can be easily reached and operated. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. With Take it easy tool finder: colour coding by profile and laser-engraved size indication. The hexagon anti-roll protection avoids blades from rolling away unintentionally. Kraftform Kompakt VDE blade for PlusMinus screws slotted/Pozidriv Reduced shaft diameter and integrated insulation protection Insulated, individually tested as per IEC 60900 9 mm hex drive with with entry chamfer Black Point tip for enhanced corrosion protection and an exact fit Application PlusMinus screws slotted/Pozidriv Blade Reduced blade diameter with integrated protective insulation, low lying PlusMinus screws can be easily reached and operated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Burnished, Black Point tip, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Testing the tool for dielectric strength at 10,000 volt gives the user the peace of mind that their tool has been tested for its most important property, insulation. Wera VDE tools are subjected to this test piece by piece which guarantees safe working at up to 1,000 volt. The 157 mm length blades are suitable for Wera Kraftform bitholding screwdrivers 7400 VDE, 837 i RA, 827 T i and 817 VDE. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE 65 iS PZ/S Take it easy SB, # 1 x 157 mm kts: Kraftform Kompakt VDE inserts for PlusMinus screws slotted/ Pozidriv 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006568001 kpn_dash: kpn_clear: 05006568001 bkpn: WERA 05006568001 bkpn_clear: WERA 05006568001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006568001 sr_ns: WERA05006568001
r: 03229452 p: 7.272 pid: 31017 b: WERA q: 0 st: lt: 12 ean: 4013288213792 sr: WERA 05136301001 sr_no_br: 05136301001 sr_no_br_cl: 05136301001 sr_cl: WERA05136301001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 152 mm Drive profile size (bit) 3 mm Blade thickness Type of drive profile (bit) Hexagon Plus Connection size (bit) 1/4" VDE approved No Bit tip HEX-Plus 3 mm n: WERA 840/4 Z SB bit, 3 x 152 mm - 05136301001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z SB bits, 3 x 152 mm kts: bit, 3 x 152 mm kpn: 840/4 Z SB kpn_dash: kpn_clear: 8404ZSB bkpn: WERA 840/4 Z SB bkpn_clear: WERA 8404ZSB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05136301001 sr_ns: WERA05136301001
r: 02818287 p: 7.272 pid: 44309 b: WERA q: 0 st: lt: 12 ean: 4013288156648 sr: WERA 05380130001 sr_no_br: 05380130001 sr_no_br_cl: 05380130001 sr_cl: WERA05380130001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 7/32" Blade thickness Type of drive profile (bit) Ball-end hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 7/32" n: WERA 842/4 hexagon bit Ball head, 7/32" x 89 mm - 05380130001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough viscous Wera bits for hexagon socket screws and universal use. The ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hexagon ballpoint for work in difficult installation situations Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Ball-end, tough, for universal use Features and benefits The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 842/4 Bits, 7/32" x 89 mm kts: hexagon bit Ball head, 7/32" x 89 mm kpn: 842/4 kpn_dash: kpn_clear: 8424 bkpn: WERA 842/4 bkpn_clear: WERA 8424 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05380130001 sr_ns: WERA05380130001
r: 02828748 p: 7.272 pid: 42517 b: WERA q: 0 st: lt: 12 ean: 4013288037268 sr: WERA 05134684001 sr_no_br: 05134684001 sr_no_br_cl: 05134684001 sr_cl: WERA05134684001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 70 mm Drive profile size (bit) 10 Blade thickness Type of drive profile (bit) Torx Plus Connection size (bit) 1/4" VDE approved No Bit tip IP10 n: WERA 867/4 IP TORX PLUS bit, 10 IP x 70 mm - 05134684001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX PLUS® screws. TORX PLUS® profile: in comparison to normal TORX® profiles, the enlargement of the 6 torque-transferring flanks between the tool and the screw is effected by means of an ellipse-shaped profile design and not a circular one. This means that the power applied when screwdriving is spread over a larger area. Higher torque is transferred and the service life of the screw and tool is also enhanced. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For TORX PLUS® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX PLUS® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Compared with the "normal" TORX® profile, the elliptical instead of circular profile enlarges the 6 flanks that transfer torque between the tool and the screw. This means that the force applied when screwdriving is spread across a larger surface area. Higher torque is transferred and, in addition, the service life of the screw and tool are lengthened. The so-called centre-lock screws on cutting tools represent a typical use of this type of screw profile. The thermal influences on such holders for carbide insert tips often "bake" the retaining screws so firmly that it is important to have a profile that considerably enhances the loosening torque capability of the screws. For this reason a torque-stable screw profile is necessary to avoid any possible damage to the screw and to exclude the possibility of an otherwise costly machine downtime. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 IP TORX PLUS® bits, 10 IP x 70 mm kts: bit, 10 IP x 70 mm kpn: 867/4 IP TORX PLUS kpn_dash: kpn_clear: 8674IPTORXPLUS bkpn: WERA 867/4 IP TORX PLUS bkpn_clear: WERA 8674IPTORXPLUS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05134684001 sr_ns: WERA05134684001
r: 08108015 p: 7.272 pid: 159613 b: WERA q: 0 st: lt: 8 ean: 4013288229021 sr: WERA 05006554001 sr_no_br: 05006554001 sr_no_br_cl: 05006554001 sr_cl: WERA05006554001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness 1 mm Type of drive profile (bit) Slotted Connection size (bit) 9 mm Connection profile (bit) Hexagonal VDE approved Yes Bit tip Slotted 5,5 mm Drive profile size (bit) 5,5 mm Product Range Wera Kraftform Kompakt n: WERA 05006554001 Kraftform Kompakt VDE insert for slotted screws 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE blade for the Kraftform Kompakt handle/interchangeable blade system for lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. With anti-roll protection and Take it easy tool finder: colour coding by profile and laser-engraved size indication. Kraftform Kompakt VDE interchangeable blades for slotted screws Insulated, individually tested as per IEC 60900 9 mm hex drive with with entry chamfer Conical blade The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Slotted screws Blade Insulated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Conical cutting edge, burnished, Black Point tip, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Testing the tool for dielectric strength at 10,000 volt gives the user the peace of mind that their tool has been tested for its most important property, insulation. Wera VDE tools are subjected to this test piece by piece which guarantees safe working at up to 1,000 volt. The 157 mm length blades are suitable for Wera Kraftform bitholding screwdrivers 7400 VDE, 837 i RA, 827 T i and 817 VDE. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE 60 i Take it easy SB, 1 x 5.5 x 157 mm kts: Kraftform Kompakt VDE insert for slotted screws 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006554001 kpn_dash: kpn_clear: 05006554001 bkpn: WERA 05006554001 bkpn_clear: WERA 05006554001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006554001 sr_ns: WERA05006554001
r: 02818281 p: 7.272 pid: 44498 b: WERA q: 0 st: lt: 12 ean: 4013288156600 sr: WERA 05380126001 sr_no_br: 05380126001 sr_no_br_cl: 05380126001 sr_cl: WERA05380126001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 1/8" Blade thickness Type of drive profile (bit) Ball-end hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 1/8" n: WERA 842/4 hexagon bit Ball head, 1/8" x 89 mm - 05380126001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough viscous Wera bits for hexagon socket screws and universal use. The ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hexagon ballpoint for work in difficult installation situations Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Ball-end, tough, for universal use Features and benefits The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 842/4 Bits, 1/8" x 89 mm kts: hexagon bit Ball head, 1/8" x 89 mm kpn: 842/4 kpn_dash: kpn_clear: 8424 bkpn: WERA 842/4 bkpn_clear: WERA 8424 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05380126001 sr_ns: WERA05380126001
r: 08108026 p: 7.272 pid: 159611 b: WERA q: 0 st: lt: 8 ean: 4013288229083 sr: WERA 05006560001 sr_no_br: 05006560001 sr_no_br_cl: 05006560001 sr_cl: WERA05006560001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Bit tip PH2 Product Range Wera Kraftform Kompakt n: WERA 05006560001 Kraftform Kompakt VDE interchangeable blade for Phillips-Recess Phillips screws 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE blade for the Kraftform Kompakt handle/interchangeable blade system. Lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Reduced blade diameter with integrated protective insulation, low-lying screw and spring elements can be easily reached and operated. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. With Take it easy tool finder: colour coding by profile and laser-engraved size indication. The hexagon anti-roll protection avoids blades from rolling away unintentionally. Kraftform Kompakt VDE interchangeable blade for cross recess screws, Phillips Reduced shaft diameter and integrated insulation protection Insulated, individually tested as per IEC 60900 9 mm hex drive with with entry chamfer Black Point tip for enhanced corrosion protection and an exact fit Application Phillips-head screws Phillips-Recess Blade Reduced blade diameter with integrated protective insulation, low lying PH screws can be easily reached and operated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Burnished, Black Point tip, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Testing the tool for dielectric strength at 10,000 volt gives the user the peace of mind that their tool has been tested for its most important property, insulation. Wera VDE tools are subjected to this test piece by piece which guarantees safe working at up to 1,000 volt. The 157 mm length blades are suitable for Wera Kraftform bitholding screwdrivers 7400 VDE, 837 i RA, 827 T i and 817 VDE. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE 62 iS Take it easy SB, PH 2 x 157 mm kts: Kraftform Kompakt VDE interchangeable blade for Phillips-Recess Phillips screws 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006560001 kpn_dash: kpn_clear: 05006560001 bkpn: WERA 05006560001 bkpn_clear: WERA 05006560001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006560001 sr_ns: WERA05006560001
r: 08108007 p: 7.272 pid: 159589 b: WERA q: 0 st: lt: 8 ean: 4013288229441 sr: WERA 05006587001 sr_no_br: 05006587001 sr_no_br_cl: 05006587001 sr_cl: WERA05006587001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" Connection profile (bit) Hexagonal VDE approved Yes Bit tip T9 Drive profile size (bit) 9 Product Range Wera Kraftform Kompakt n: WERA 05006587001 Kraftform Kompakt VDE insert for TORX screws 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE stainless blades for Kraftform Kompakt handle/blade system. Lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Wera's stainless steel tools are vacuum ice tempered and therefore have the hardness and strength properties required for screw connections. Industrial use is possible without restrictions. With Take it easy Tool finder: Colour coding by profile and laser-engraved size indication. The hexagon anti-roll protection avoids blades from rolling away unintentionally. Kraftform Kompakt VDE interchangeable blade for TORX® screws Insulated, individually tested as per IEC 60900 Blades made of stainless steel to prevent extraneous rust Vacuum ice-hardening provides the required hardness and strength 9 mm hex drive with with entry chamfer Application TORX® screws Blade Insulated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Stainless steel, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Testing the tool for dielectric strength at 10,000 volt gives the user the peace of mind that their tool has been tested for its most important property, insulation. Wera VDE tools are subjected to this test piece by piece which guarantees safe working at up to 1,000 volt. The VDE-insulated Kraftform Kompakt stainless blades are suitable for the 3817 VDE Stainless handle. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE 3067 i TORX® Take it easy SB, stainless steel, TX 9 x 157 mm kts: Kraftform Kompakt VDE insert for TORX screws 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006587001 kpn_dash: kpn_clear: 05006587001 bkpn: WERA 05006587001 bkpn_clear: WERA 05006587001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006587001 sr_ns: WERA05006587001
r: 02646578 p: 7.272 pid: 44084 b: WERA q: 0 st: lt: 8 ean: 4013288112606 sr: WERA 05135120001 sr_no_br: 05135120001 sr_no_br_cl: 05135120001 sr_cl: WERA05135120001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Torx Plus Connection size (bit) 1/4" VDE approved No Bit tip IP1 n: WERA 867/1 IP TORX PLUS bit, 1 IP x 25 mm - 05135120001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX PLUS® screws. TORX PLUS® profile: in comparison to normal TORX® profiles, the enlargement of the 6 torque-transferring flanks between the tool and the screw is effected by means of an ellipse-shaped profile design and not a circular one. This means that the power applied when screwdriving is spread over a larger area. Higher torque is transferred and the service life of the screw and tool is also enhanced. Extra-hard. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For TORX PLUS® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application TORX PLUS® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits Compared with the "normal" TORX® profile, the elliptical instead of circular profile enlarges the 6 flanks that transfer torque between the tool and the screw. This means that the force applied when screwdriving is spread across a larger surface area. Higher torque is transferred and, in addition, the service life of the screw and tool are lengthened. The so-called centre-lock screws on cutting tools represent a typical use of this type of screw profile. The thermal influences on such holders for carbide insert tips often "bake" the retaining screws so firmly that it is important to have a profile that considerably enhances the loosening torque capability of the screws. For this reason a torque-stable screw profile is necessary to avoid any possible damage to the screw and to exclude the possibility of an otherwise costly machine downtime. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/1 IP TORX PLUS® bits, IP 1 x 25 mm kts: bit, 1 IP x 25 mm kpn: 867/1 IP TORX PLUS kpn_dash: kpn_clear: 8671IPTORXPLUS bkpn: WERA 867/1 IP TORX PLUS bkpn_clear: WERA 8671IPTORXPLUS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05135120001 sr_ns: WERA05135120001
r: 02798417 p: 7.272 pid: 45996 b: WERA q: 0 st: lt: 12 ean: 4013288037282 sr: WERA 05134686001 sr_no_br: 05134686001 sr_no_br_cl: 05134686001 sr_cl: WERA05134686001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 70 mm Drive profile size (bit) 15 Blade thickness Type of drive profile (bit) Torx Plus Connection size (bit) 1/4" VDE approved No Bit tip IP15 n: WERA 867/4 IP TORX PLUS bit, 15 IP x 70 mm - 05134686001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX PLUS® screws. TORX PLUS® profile: in comparison to normal TORX® profiles, the enlargement of the 6 torque-transferring flanks between the tool and the screw is effected by means of an ellipse-shaped profile design and not a circular one. This means that the power applied when screwdriving is spread over a larger area. Higher torque is transferred and the service life of the screw and tool is also enhanced. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For TORX PLUS® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX PLUS® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Compared with the "normal" TORX® profile, the elliptical instead of circular profile enlarges the 6 flanks that transfer torque between the tool and the screw. This means that the force applied when screwdriving is spread across a larger surface area. Higher torque is transferred and, in addition, the service life of the screw and tool are lengthened. The so-called centre-lock screws on cutting tools represent a typical use of this type of screw profile. The thermal influences on such holders for carbide insert tips often "bake" the retaining screws so firmly that it is important to have a profile that considerably enhances the loosening torque capability of the screws. For this reason a torque-stable screw profile is necessary to avoid any possible damage to the screw and to exclude the possibility of an otherwise costly machine downtime. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 IP TORX PLUS® bits, 15 IP x 70 mm kts: bit, 15 IP x 70 mm kpn: 867/4 IP TORX PLUS kpn_dash: kpn_clear: 8674IPTORXPLUS bkpn: WERA 867/4 IP TORX PLUS bkpn_clear: WERA 8674IPTORXPLUS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05134686001 sr_ns: WERA05134686001
r: 03177085 p: 7.272 pid: 33039 b: WERA q: 0 st: lt: 10 ean: 4013288202499 sr: WERA 05073059001 sr_no_br: 05073059001 sr_no_br_cl: 05073059001 sr_cl: WERA05073059001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 4 mm Blade thickness Type of drive profile (bit) Hexagon Plus Connection size (bit) 1/4" VDE approved No Bit tip HEX-Plus 4 mm n: WERA 840/4 Z SB bit, 4 x 50 mm (2 pcs) - 05073059001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw head is almost eliminated. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z SB bits, 4 x 50 mm, 2 pieces 2x 840/4 Z bits: 4 x 50 mm kts: bit, 4 x 50 mm (2 pcs) kpn: 840/4 Z SB kpn_dash: kpn_clear: 8404ZSB bkpn: WERA 840/4 Z SB bkpn_clear: WERA 8404ZSB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073059001 sr_ns: WERA05073059001
r: 02818285 p: 7.272 pid: 44900 b: WERA q: 0 st: lt: 12 ean: 4013288156631 sr: WERA 05380129001 sr_no_br: 05380129001 sr_no_br_cl: 05380129001 sr_cl: WERA05380129001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 3/16" Blade thickness Type of drive profile (bit) Ball-end hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 3/16" n: WERA 842/4 hexagon bit Ball head, 3/16" x 89 mm - 05380129001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough viscous Wera bits for hexagon socket screws and universal use. The ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hexagon ballpoint for work in difficult installation situations Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Ball-end, tough, for universal use Features and benefits The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 842/4 Bits, 3/16" x 89 mm kts: hexagon bit Ball head, 3/16" x 89 mm kpn: 842/4 kpn_dash: kpn_clear: 8424 bkpn: WERA 842/4 bkpn_clear: WERA 8424 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05380129001 sr_ns: WERA05380129001
r: 02122610 p: 7.23 pid: 45729 b: WERA q: 0 st: lt: 12 ean: 4013288038562 sr: WERA 05056343001 sr_no_br: 05056343001 sr_no_br_cl: 05056343001 sr_cl: WERA05056343001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 3 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 3 mm Product Range Wera Hex-Plus n: WERA 840/1 Z Hex-Plus BO hexagonal BO bits with bore, 3 x 25 mm - 05056343001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough viscous Wera bits for hexagon socket screws and universal use. Hex-Plus offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. Hexagon socket BO screws have a protruding pin in their drive profile. This prevents any unauthorised loosening since the "normal" hex tools cannot move these screws. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For hexagon socket screws with safety pin (BO = with bore hole) Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Hexagon socket screws with safety pin (BO = with bore hole) Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Hex-Plus with bore hole, tough, for universal use Features and benefits For hexagon socket screws with safety pin. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/1 Z Tamper-proof Hex-Plus BO bits, 3 x 25 mm kts: hexagonal BO bits with bore, 3 x 25 mm kpn: 840/1 Z Hex-Plus BO kpn_dash: 840/1 Z Hex kpn_clear: 8401ZHexPlusBO bkpn: WERA 840/1 Z Hex-Plus BO bkpn_clear: WERA 8401ZHexPlusBO c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05056343001 sr_ns: WERA05056343001
r: 41975576 p: 7.23 pid: 72757 b: WERA q: 0 st: lt: 15 ean: 4013288038593 sr: WERA 05056344001 sr_no_br: 05056344001 sr_no_br_cl: 05056344001 sr_cl: WERA05056344001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 4 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 4 mm Product Range Wera Hex-Plus n: WERA 840/1 Z Hex-Plus BO hexagonal BO bits with bore, 4 x 25 mm - 05056344001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough viscous Wera bits for hexagon socket screws and universal use. Hex-Plus offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. Hexagon socket BO screws have a protruding pin in their drive profile. This prevents any unauthorised loosening since the "normal" hex tools cannot move these screws. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For hexagon socket screws with safety pin (BO = with bore hole) Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Hexagon socket screws with safety pin (BO = with bore hole) Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Hex-Plus with bore hole, tough, for universal use Features and benefits For hexagon socket screws with safety pin. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/1 Z Tamper-proof Hex-Plus BO bits, 4 x 25 mm kts: hexagonal BO bits with bore, 4 x 25 mm kpn: 840/1 Z Hex-Plus BO kpn_dash: 840/1 Z Hex kpn_clear: 8401ZHexPlusBO bkpn: WERA 840/1 Z Hex-Plus BO bkpn_clear: WERA 8401ZHexPlusBO c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05056344001 sr_ns: WERA05056344001
r: 02646651 p: 7.23 pid: 43680 b: WERA q: 0 st: lt: 12 ean: 4013288038548 sr: WERA 05056341001 sr_no_br: 05056341001 sr_no_br_cl: 05056341001 sr_cl: WERA05056341001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 2 mm Product Range Wera Hex-Plus n: WERA 840/1 Z Hex-Plus BO hexagonal BO bits with bore, 2 x 25 mm - 05056341001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough viscous Wera bits for hexagon socket screws and universal use. Hex-Plus offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. Hexagon socket BO screws have a protruding pin in their drive profile. This prevents any unauthorised loosening since the "normal" hex tools cannot move these screws. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For hexagon socket screws with safety pin (BO = with bore hole) Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Hexagon socket screws with safety pin (BO = with bore hole) Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Hex-Plus with bore hole, tough, for universal use Features and benefits For hexagon socket screws with safety pin. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/1 Z Tamper-proof Hex-Plus BO bits, 2 x 25 mm kts: hexagonal BO bits with bore, 2 x 25 mm kpn: 840/1 Z Hex-Plus BO kpn_dash: 840/1 Z Hex kpn_clear: 8401ZHexPlusBO bkpn: WERA 840/1 Z Hex-Plus BO bkpn_clear: WERA 8401ZHexPlusBO c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05056341001 sr_ns: WERA05056341001
r: 02011591 p: 7.2 pid: 42560 b: WERA q: 0 st: lt: 12 ean: 4013288036384 sr: WERA 05135096001 sr_no_br: 05135096001 sr_no_br_cl: 05135096001 sr_cl: WERA05135096001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 50 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 5/32" Drive profile size (bit) 5/32" Product Range Wera Hex-Plus n: WERA 840/4 Z Hex-Plus hexagon bit, 5/32" x 50 mm - 05135096001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z bits, 5/32" x 50 mm kts: hexagon bit, 5/32" x 50 mm kpn: 840/4 Z Hex-Plus kpn_dash: 840/4 Z Hex kpn_clear: 8404ZHexPlus bkpn: WERA 840/4 Z Hex-Plus bkpn_clear: WERA 8404ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05135096001 sr_ns: WERA05135096001
r: 02240435 p: 7.2 pid: 43603 b: WERA q: 0 st: lt: 12 ean: 4013288036407 sr: WERA 05135098001 sr_no_br: 05135098001 sr_no_br_cl: 05135098001 sr_cl: WERA05135098001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 50 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 7/32" Drive profile size (bit) 7/32" Product Range Wera Hex-Plus n: WERA 840/4 Z Hex-Plus hexagon bit, 7/32" x 50 mm - 05135098001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z bits, 7/32" x 50 mm kts: hexagon bit, 7/32" x 50 mm kpn: 840/4 Z Hex-Plus kpn_dash: 840/4 Z Hex kpn_clear: 8404ZHexPlus bkpn: WERA 840/4 Z Hex-Plus bkpn_clear: WERA 8404ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05135098001 sr_ns: WERA05135098001
r: 87990194 p: 7.2 pid: 71556 b: WERA q: 0 st: lt: 12 ean: 4013288036391 sr: WERA 05135097001 sr_no_br: 05135097001 sr_no_br_cl: 05135097001 sr_cl: WERA05135097001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 50 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 3/16" Drive profile size (bit) 3/16" Product Range Wera Hex-Plus n: WERA 840/4 Z Hex-Plus hexagon bit, 3/16" x 50 mm - 05135097001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z bits, 3/16" x 50 mm kts: hexagon bit, 3/16" x 50 mm kpn: 840/4 Z Hex-Plus kpn_dash: 840/4 Z Hex kpn_clear: 8404ZHexPlus bkpn: WERA 840/4 Z Hex-Plus bkpn_clear: WERA 8404ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05135097001 sr_ns: WERA05135097001
