r: 02818542 p: 6.12 pid: 45133 b: WERA q: 0 st: lt: 12 ean: 4013288034328 sr: WERA 05059544001 sr_no_br: 05059544001 sr_no_br_cl: 05059544001 sr_cl: WERA05059544001 sr_dash: sold: 24.48 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 3 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH3 n: WERA 851/4 BTH PH bit Phillips, PH 3 x 50 mm - 05059544001 cn: BIT cn2: BIT cn_clear: BIT d: Product description BiTorsion bits for Phillips screws with Torsion zone where kinetic energy is diverted from peak loads. This greatly extends the product service life; 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For Phillips screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Particularly hard for semi-hard materials 1/4" hexagon drive (Wera connecting series 4) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design BiTorsion for long service life, extra-hard. Take it easy tool finder: Output colour coding (red = Phillips) and large stamp to enable the desired bit to be easily located. Features and benefits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. The BiTorsion holder and the BiTorsion bit can, of course, be used independently of one another. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 851/4 BTH bits, PH 3 x 50 mm kts: bit Phillips, PH 3 x 50 mm kpn: 851/4 BTH PH kpn_dash: kpn_clear: 8514BTHPH bkpn: WERA 851/4 BTH PH bkpn_clear: WERA 8514BTHPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059544001 sr_ns: WERA05059544001
r: 02818546 p: 6.12 pid: 45017 b: WERA q: 0 st: lt: 12 ean: 4013288034588 sr: WERA 05059552001 sr_no_br: 05059552001 sr_no_br_cl: 05059552001 sr_cl: WERA05059552001 sr_dash: sold: 24.48 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 n: WERA 851/4 BTZ PH bit Phillips, PH 2 x 50 mm - 05059552001 cn: BIT cn2: BIT cn_clear: BIT d: Product description BiTorsion bits for Phillips screws with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Tough, for universal use. 1/4" hexagonal, suitable for bitholding screwdrivers as per DIN ISO 1173-F 6.3. For Phillips screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design BiTorsion for long service life, extra-tough, for universal use. Take it easy tool finder: Output colour coding (red = Phillips) and large stamp to enable the desired bit to be easily located. Features and benefits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. The BiTorsion holder and the BiTorsion bit can, of course, be used independently of one another. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 851/4 BTZ bits, PH 2 x 50 mm kts: bit Phillips, PH 2 x 50 mm kpn: 851/4 BTZ PH kpn_dash: kpn_clear: 8514BTZPH bkpn: WERA 851/4 BTZ PH bkpn_clear: WERA 8514BTZPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059552001 sr_ns: WERA05059552001
r: 02818543 p: 6.12 pid: 45137 b: WERA q: 0 st: lt: 12 ean: 4013288034571 sr: WERA 05059550001 sr_no_br: 05059550001 sr_no_br_cl: 05059550001 sr_cl: WERA05059550001 sr_dash: sold: 24.48 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH1 n: WERA 851/4 BTZ PH bit Phillips, PH 1 x 50 mm - 05059550001 cn: BIT cn2: BIT cn_clear: BIT d: Product description BiTorsion bits for Phillips screws with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Tough, for universal use. 1/4" hexagonal, suitable for bitholding screwdrivers as per DIN ISO 1173-F 6.3. For Phillips screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design BiTorsion for long service life, extra-tough, for universal use. Take it easy tool finder: Output colour coding (red = Phillips) and large stamp to enable the desired bit to be easily located. Features and benefits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. The BiTorsion holder and the BiTorsion bit can, of course, be used independently of one another. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 851/4 BTZ bits, PH 1 x 50 mm kts: bit Phillips, PH 1 x 50 mm kpn: 851/4 BTZ PH kpn_dash: kpn_clear: 8514BTZPH bkpn: WERA 851/4 BTZ PH bkpn_clear: WERA 8514BTZPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059550001 sr_ns: WERA05059550001
r: 02823065 p: 6.12 pid: 46812 b: WERA q: 0 st: lt: 16 ean: 4013288034601 sr: WERA 05059920001 sr_no_br: 05059920001 sr_no_br_cl: 05059920001 sr_cl: WERA05059920001 sr_dash: sold: 24.48 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ1 n: WERA 855/4 BTZ PZ bit Pozidriv, PZ 1 x 50 mm - 05059920001 cn: BIT cn2: BIT cn_clear: BIT d: Product description BiTorsion bits for Pozidriv* screws with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-F 6.3. Suitable for Pozidriv screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design BiTorsion for long service life, extra-tough, for universal use. Take it easy tool finder: Output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located. Features and benefits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. The BiTorsion holder and the BiTorsion bit can, of course, be used independently of one another. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 855/4 BTZ bits, PZ 1 x 50 mm kts: bit Pozidriv, PZ 1 x 50 mm kpn: 855/4 BTZ PZ kpn_dash: kpn_clear: 8554BTZPZ bkpn: WERA 855/4 BTZ PZ bkpn_clear: WERA 8554BTZPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059920001 sr_ns: WERA05059920001
r: 87010189 p: 12.2 pid: 70979 b: WERA q: 0 st: lt: 13 ean: 4013288011299 sr: WERA 05057235001 sr_no_br: 05057235001 sr_no_br_cl: 05057235001 sr_cl: WERA05057235001 sr_dash: sold: 24.4 p_range: none type: standard act: 1 avo: 1 av: Length 41 mm Blade thickness 1,6 mm Type of drive profile (bit) Slotted Connection size (bit) 5/16" VDE approved No Bit tip Slotted 10 mm Drive profile size (bit) 10 mm n: WERA 800/2 Z slotted screw bit, 1.6 x 10 x 41 mm - 05057235001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough viscous bits for slotted screws for universal use. 5/16" hexagon, suitable for holders as per DIN ISO 1173-D 8. For slotted screws Tough for hard materials 5/16" hexagon drive (Wera connecting series 2) Application Slotted screws Drive 5/16" hexagon, suitable for DIN ISO 1173-D 8 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 800/2 Z bits, 1.6 x 10 x 41 mm kts: slotted screw bit, 1.6 x 10 x 41 mm kpn: 800/2 Z kpn_dash: kpn_clear: 8002Z bkpn: WERA 800/2 Z bkpn_clear: WERA 8002Z c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05057235001 sr_ns: WERA05057235001
r: 03336537 p: 12.18 pid: 159564 b: WERA q: 0 st: lt: 9 ean: 4013288228475 sr: WERA 05006505001 sr_no_br: 05006505001 sr_no_br_cl: 05006505001 sr_cl: WERA05006505001 sr_dash: sold: 24.36 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness 1,2 mm Type of drive profile (bit) Slotted Connection size (bit) 9 mm Connection profile (bit) Hexagonal VDE approved Yes Bit tip Slotted 6,5 mm Drive profile size (bit) 6,5 mm Product Range Wera Kraftform Kompakt n: WERA 05006505001 Kraftform Kompakt VDE insert for slotted screws 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE blade for the Kraftform Kompakt handle/interchangeable blade system for lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. With anti-roll protection and Take it easy tool finder: colour coding by profile and laser-engraved size indication. Kraftform Kompakt VDE interchangeable blades for slotted screws Insulated, individually tested as per IEC 60900 9 mm hex drive with with entry chamfer Conical blade The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Slotted screws Blade Insulated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Conical cutting edge, burnished, Black Point tip, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Testing the tool for dielectric strength at 10,000 volt gives the user the peace of mind that their tool has been tested for its most important property, insulation. Wera VDE tools are subjected to this test piece by piece which guarantees safe working at up to 1,000 volt. The 157 mm length blades are suitable for Wera Kraftform bitholding screwdrivers 7400 VDE, 837 i RA, 827 T i and 817 VDE. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE 60 i Take it easy, 1.2 x 6.5 x 157 mm kts: Kraftform Kompakt VDE insert for slotted screws 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006505001 kpn_dash: kpn_clear: 05006505001 bkpn: WERA 05006505001 bkpn_clear: WERA 05006505001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006505001 sr_ns: WERA05006505001
r: 03336526 p: 6.07 pid: 159553 b: WERA q: 0 st: lt: 10 ean: 4013288228420 sr: WERA 05006500001 sr_no_br: 05006500001 sr_no_br_cl: 05006500001 sr_cl: WERA05006500001 sr_dash: sold: 24.28 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness 0,4 mm Type of drive profile (bit) Slotted Connection size (bit) 9 mm Connection profile (bit) Hexagonal VDE approved Yes Bit tip Slotted 2,5 mm Drive profile size (bit) 2,5 mm Product Range Wera Kraftform Kompakt n: WERA 05006500001 Kraftform Kompakt VDE insert for slotted screws 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE blade for the Kraftform Kompakt handle/interchangeable blade system for lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. With anti-roll protection and Take it easy tool finder: colour coding by profile and laser-engraved size indication. Kraftform Kompakt VDE interchangeable blades for slotted screws Insulated, individually tested as per IEC 60900 9 mm hex drive with with entry chamfer Conical blade The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Slotted screws Blade Insulated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Conical cutting edge, burnished, Black Point tip, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Testing the tool for dielectric strength at 10,000 volt gives the user the peace of mind that their tool has been tested for its most important property, insulation. Wera VDE tools are subjected to this test piece by piece which guarantees safe working at up to 1,000 volt. The 157 mm length blades are suitable for Wera Kraftform bitholding screwdrivers 7400 VDE, 837 i RA, 827 T i and 817 VDE. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE 60 i Take it easy, 0.4 x 2.5 x 157 mm kts: Kraftform Kompakt VDE insert for slotted screws 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006500001 kpn_dash: kpn_clear: 05006500001 bkpn: WERA 05006500001 bkpn_clear: WERA 05006500001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006500001 sr_ns: WERA05006500001
r: 08108043 p: 12.08 pid: 159639 b: WERA q: 0 st: lt: 8 ean: 4013288228697 sr: WERA 05006527001 sr_no_br: 05006527001 sr_no_br_cl: 05006527001 sr_cl: WERA05006527001 sr_dash: sold: 24.16 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 9 mm Connection profile (bit) Hexagonal VDE approved Yes Bit tip PZ2 Drive profile size (bit) 2 Product Range Wera Kraftform Kompakt n: WERA 05006527001 Kraftform Kompakt VDE insert for Pozidriv screws 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE blade for the Kraftform Kompakt handle/interchangeable blade system. Lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Reduced blade diameter with integrated protective insulation, low-lying screw and spring elements can be easily reached and operated. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. With Take it easy tool finder: colour coding by profile and laser-engraved size indication. The hexagon anti-roll protection avoids blades from rolling away unintentionally. Kraftform Kompakt VDE interchangeable blade suitable for Pozidriv screws Reduced shaft diameter and integrated insulation protection Insulated, individually tested as per IEC 60900 9 mm hex drive with with entry chamfer The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Suitable for Pozidriv screws Blade Reduced blade diameter with integrated protective insulation, low lying PZ screws can be easily reached and operated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Burnished, Black Point tip, with Take it easy Tool finder: Colour coding by profile and size stamping Features and benefits Our screwdrivers are tested for dielectric strength under a 10,000 volt load to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts. The 157 mm length blades are suitable for Wera Kraftform bitholding screwdrivers 7400 VDE, 837 i RA, 827 T i and 817 VDE. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE 65 iS Take it easy, PZ 2 x 157 mm kts: Kraftform Kompakt VDE insert for Pozidriv screws 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006527001 kpn_dash: kpn_clear: 05006527001 bkpn: WERA 05006527001 bkpn_clear: WERA 05006527001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006527001 sr_ns: WERA05006527001
r: 02774748 p: 7.91 pid: 44430 b: WERA q: 0 st: lt: 8 ean: 4013288168283 sr: WERA 05135266001 sr_no_br: 05135266001 sr_no_br_cl: 05135266001 sr_cl: WERA05135266001 sr_dash: sold: 23.73 p_range: none type: standard act: 1 avo: 1 av: Length 44 mm Blade thickness 0,4 mm Type of drive profile (bit) Slotted Connection size (bit) 4 mm Connection profile (bit) Halfmoon VDE approved No Bit tip Slotted 2 mm Drive profile size (bit) 2 mm n: WERA 800/9 C slotted screw bit, 0.40 x 2 x 44 mm - 05135266001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Hard bits against premature breakage. Drive: halfmoon, 4 mm. For slotted screws Hard design 4 mm halfmoon drive (Wera connecting series 9) Application Slotted screws Drive Halfmoon, 4 mm Design Hard Features and benefits Halfmoon, 4mm, Wera Series 9. Drive: For direct machine drive. Suitable for: Delvo, Densei etc. ds: dsc: Scope of delivery 800/9 C bits, 0.40 x 2 x 44 mm kts: slotted screw bit, 0.40 x 2 x 44 mm kpn: 800/9 C kpn_dash: kpn_clear: 8009C bkpn: WERA 800/9 C bkpn_clear: WERA 8009C c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05135266001 sr_ns: WERA05135266001
r: 03229345 p: 7.91 pid: 71022 b: WERA q: 0 st: lt: 8 ean: 4013288194770 sr: WERA 05135264001 sr_no_br: 05135264001 sr_no_br_cl: 05135264001 sr_cl: WERA05135264001 sr_dash: sold: 23.73 p_range: none type: standard act: 1 avo: 1 av: Length 44 mm Blade thickness 0,35 mm Type of drive profile (bit) Slotted Connection size (bit) 4 mm Connection profile (bit) Halfmoon VDE approved No Bit tip Slotted 2,5 mm Drive profile size (bit) 2,5 mm n: WERA 800/9 C slotted screw bit, 0.35 x 2.5 x 44 mm - 05135264001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Hard bits against premature breakage. Drive: halfmoon, 4 mm. For slotted screws Hard design 4 mm halfmoon drive (Wera connecting series 9) Application Slotted screws Drive Halfmoon, 4 mm Design Hard Features and benefits Halfmoon, 4mm, Wera Series 9. Drive: For direct machine drive. Suitable for: Delvo, Densei etc. ds: dsc: Scope of delivery 800/9 C bits, 0.35 x 2.5 x 44 mm kts: slotted screw bit, 0.35 x 2.5 x 44 mm kpn: 800/9 C kpn_dash: kpn_clear: 8009C bkpn: WERA 800/9 C bkpn_clear: WERA 8009C c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05135264001 sr_ns: WERA05135264001
r: 02774751 p: 7.91 pid: 45990 b: WERA q: 0 st: lt: 8 ean: 4013288168290 sr: WERA 05135267001 sr_no_br: 05135267001 sr_no_br_cl: 05135267001 sr_cl: WERA05135267001 sr_dash: sold: 23.73 p_range: none type: standard act: 1 avo: 1 av: Length 44 mm Blade thickness 0,5 mm Type of drive profile (bit) Slotted Connection size (bit) 4 mm Connection profile (bit) Halfmoon VDE approved No Bit tip Slotted 3 mm Drive profile size (bit) 3 mm n: WERA 800/9 C slotted screw bit, 0.50 x 3 x 44 mm - 05135267001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Hard bits against premature breakage. Drive: halfmoon, 4 mm. For slotted screws Hard design 4 mm halfmoon drive (Wera connecting series 9) Application Slotted screws Drive Halfmoon, 4 mm Design Hard Features and benefits Halfmoon, 4mm, Wera Series 9. Drive: For direct machine drive. Suitable for: Delvo, Densei etc. ds: dsc: Scope of delivery 800/9 C bits, 0.50 x 3 x 44 mm kts: slotted screw bit, 0.50 x 3 x 44 mm kpn: 800/9 C kpn_dash: kpn_clear: 8009C bkpn: WERA 800/9 C bkpn_clear: WERA 8009C c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05135267001 sr_ns: WERA05135267001
r: 02823414 p: 4.62 pid: 45195 b: WERA q: 0 st: lt: 8 ean: 4013288029157 sr: WERA 05073314001 sr_no_br: 05073314001 sr_no_br_cl: 05073314001 sr_cl: WERA05073314001 sr_dash: sold: 23.1 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 20 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T20 Quantity per blister 2 n: WERA 867/1 SB SIS TORX bits, TX 20 x 25 mm (2 pcs) - 05073314001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX PLUS® screws. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For recessed TORX® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) In practical 2-piece set Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design For universal use Features and benefits ds: dsc: Scope of delivery 867/1 SB TORX® bits, TX 20 x 25 mm, 2 pieces 2x 867/1 TORX® bits: TX 20 x 25 mm kts: bits, TX 20 x 25 mm (2 pcs) kpn: 867/1 SB SIS TORX kpn_dash: kpn_clear: 8671SBSISTORX bkpn: WERA 867/1 SB SIS TORX bkpn_clear: WERA 8671SBSISTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073314001 sr_ns: WERA05073314001
r: 87010045 p: 7.61 pid: 72831 b: WERA q: 3 st: 1 lt: 1 ean: 4013288011275 sr: WERA 05057225001 sr_no_br: 05057225001 sr_no_br_cl: 05057225001 sr_cl: WERA05057225001 sr_dash: sold: 22.83 p_range: none type: standard act: 1 avo: 1 av: Length 41 mm Blade thickness 1,2 mm Type of drive profile (bit) Slotted Connection size (bit) 5/16" VDE approved No Bit tip Slotted 8 mm Drive profile size (bit) 8 mm n: WERA 800/2 Z slotted screw bit, 1.2 x 8 x 41 mm - 05057225001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough viscous bits for slotted screws for universal use. 5/16" hexagon, suitable for holders as per DIN ISO 1173-D 8. For slotted screws Tough for hard materials 5/16" hexagon drive (Wera connecting series 2) Application Slotted screws Drive 5/16" hexagon, suitable for DIN ISO 1173-D 8 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 800/2 Z bits, 1.2 x 8 x 41 mm kts: slotted screw bit, 1.2 x 8 x 41 mm kpn: 800/2 Z kpn_dash: kpn_clear: 8002Z bkpn: WERA 800/2 Z bkpn_clear: WERA 8002Z c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05057225001 sr_ns: WERA05057225001
r: 87010202 p: 7.57 pid: 72971 b: WERA q: 0 st: lt: 12 ean: 4013288016119 sr: WERA 05066902001 sr_no_br: 05066902001 sr_no_br_cl: 05066902001 sr_cl: WERA05066902001 sr_dash: sold: 22.71 p_range: none type: standard act: 1 avo: 1 av: Length 35 mm Drive profile size (bit) 27 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 5/16" VDE approved No Bit tip T27 n: WERA 867/2 Z TORX bit, TX 27 x 35 mm - 05066902001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX® screws. Tough viscous for universal use. 5/16" hexagon, suitable for holders as per DIN ISO 1173-D 8. For recessed TORX® screws Tough for hard materials 5/16" hexagon drive (Wera connecting series 2) Application TORX® socket screws Drive 5/16" hexagon, suitable for DIN ISO 1173-D 8 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/2 Z TORX® bits, TX 27 x 35 mm kts: bit, TX 27 x 35 mm kpn: 867/2 Z TORX kpn_dash: kpn_clear: 8672ZTORX bkpn: WERA 867/2 Z TORX bkpn_clear: WERA 8672ZTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066902001 sr_ns: WERA05066902001
r: 87010146 p: 5.67 pid: 70936 b: WERA q: 0 st: lt: 12 ean: 4013288011572 sr: WERA 05059325001 sr_no_br: 05059325001 sr_no_br_cl: 05059325001 sr_cl: WERA05059325001 sr_dash: sold: 22.68 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Blade thickness 0,8 mm Type of drive profile (bit) Slotted Connection size (bit) 1/4" VDE approved No Bit tip Slotted 5,5 mm Drive profile size (bit) 5,5 mm n: WERA 800/4 Z slotted screw bit, 0.8 x 5.5 x 50 mm - 05059325001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for slotted screws, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For slotted screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Slotted screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 800/4 Z bits, 0.8 x 5.5 x 50 mm kts: slotted screw bit, 0.8 x 5.5 x 50 mm kpn: 800/4 Z kpn_dash: kpn_clear: 8004Z bkpn: WERA 800/4 Z bkpn_clear: WERA 8004Z c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059325001 sr_ns: WERA05059325001
r: 87010037 p: 5.67 pid: 72090 b: WERA q: 0 st: lt: 11 ean: 4013288011534 sr: WERA 05059315001 sr_no_br: 05059315001 sr_no_br_cl: 05059315001 sr_cl: WERA05059315001 sr_dash: sold: 22.68 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Blade thickness 0,6 mm Type of drive profile (bit) Slotted Connection size (bit) 1/4" VDE approved No Bit tip Slotted 4,5 mm Drive profile size (bit) 4,5 mm n: WERA 800/4 Z slotted screw bit, 0.6 x 4.5 x 50 mm - 05059315001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for slotted screws, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For slotted screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Slotted screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 800/4 Z bits, 0.6 x 4.5 x 50 mm kts: slotted screw bit, 0.6 x 4.5 x 50 mm kpn: 800/4 Z kpn_dash: kpn_clear: 8004Z bkpn: WERA 800/4 Z bkpn_clear: WERA 8004Z c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059315001 sr_ns: WERA05059315001
r: 02827876 p: 7.44 pid: 45311 b: WERA q: 0 st: lt: 8 ean: 4013288169211 sr: WERA 05060300001 sr_no_br: 05060300001 sr_no_br_cl: 05060300001 sr_cl: WERA05060300001 sr_dash: sold: 22.32 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Square Connection size (bit) 1/4" VDE approved No Bit tip # 1 n: WERA 868/4 V inside square bit, 1 x 50 mm - 05060300001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for square socket screws with holding function. The wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screw on the tool. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Suitable for square head socket screws Holding function Tough for hard materials Prevents premature breakage of the drive tip 1/4" hexagon drive (Wera connecting series 4) Application Square socket head screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use, with holding function Features and benefits V bits have a conical profile. The clamping forces thus resulting hold Robertson screws securely on the tip of the tool. Ideal for screwdriving at difficult-to-access places. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 868/4 V Square-Plus bits, # 1 x 50 mm kts: inside square bit, # 1 x 50 mm kpn: 868/4 V kpn_dash: kpn_clear: 8684V bkpn: WERA 868/4 V bkpn_clear: WERA 8684V c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05060300001 sr_ns: WERA05060300001
r: 02828655 p: 11.15 pid: 42198 b: WERA q: 0 st: lt: 15 ean: 4013288155986 sr: WERA 05059701001 sr_no_br: 05059701001 sr_no_br_cl: 05059701001 sr_cl: WERA05059701001 sr_dash: sold: 22.3 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Drive profile size (bit) 15 Blade thickness Type of drive profile (bit) Ball-end Torx Connection size (bit) 1/4" VDE approved No Bit tip T15 n: WERA 867/4 KK TORX bit, TX 15 x 89 mm - 05059701001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX® screws. Ballpoint: the ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For recessed TORX® screws TORX® ballpoint for work in difficult installation situations Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Ball-end, tough, for universal use Features and benefits The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/4 KK TORX® bits, TX 15 x 89 mm kts: bit, TX 15 x 89 mm kpn: 867/4 KK TORX kpn_dash: kpn_clear: 8674KKTORX bkpn: WERA 867/4 KK TORX bkpn_clear: WERA 8674KKTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059701001 sr_ns: WERA05059701001
r: 87940075 p: 4.46 pid: 71014 b: WERA q: 7 st: 1 lt: 1 ean: 4013288030207 sr: WERA 05066405001 sr_no_br: 05066405001 sr_no_br_cl: 05066405001 sr_cl: WERA05066405001 sr_dash: sold: 22.3 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Square Connection size (bit) 1/4" VDE approved No Bit tip # 1 n: WERA 868/1 Z inside square bit, 1 x 25 mm - 05066405001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for square head socket screws. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. Suitable for square head socket screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Square socket head screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 868/1 Z Square-Plus bits, # 1 x 25 mm kts: inside square bit, # 1 x 25 mm kpn: 868/1 Z kpn_dash: kpn_clear: 8681Z bkpn: WERA 868/1 Z bkpn_clear: WERA 8681Z c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066405001 sr_ns: WERA05066405001
r: 02818183 p: 7.272 pid: 43841 b: WERA q: 0 st: lt: 12 ean: 4013288155511 sr: WERA 05059664001 sr_no_br: 05059664001 sr_no_br_cl: 05059664001 sr_cl: WERA05059664001 sr_dash: sold: 21.816 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 89 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 9/64" Drive profile size (bit) 9/64" Product Range Wera Hex-Plus n: WERA 840/4 Z Hex-Plus hexagon bit, 9/64" x 89 mm - 05059664001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z bits, 9/64" x 89 mm kts: hexagon bit, 9/64" x 89 mm kpn: 840/4 Z Hex-Plus kpn_dash: 840/4 Z Hex kpn_clear: 8404ZHexPlus bkpn: WERA 840/4 Z Hex-Plus bkpn_clear: WERA 8404ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05059664001 sr_ns: WERA05059664001
