r: 02828278 p: 6.87 pid: 42633 b: WERA q: 0 st: lt: 12 ean: 4013288112101 sr: WERA 05073613001 sr_no_br: 05073613001 sr_no_br_cl: 05073613001 sr_cl: WERA05073613001 sr_dash: sold: 34.35 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ1 Quantity per blister 1 n: WERA 3855/1 TS SB SiS bit Pozidriv, stainless steel, PZ 1 x 25 mm - 05073613001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits out of stainless steel for Pozidriv screws. Wera stainless are made out of stainless steel which prevents the formation of unsightly extraneous rust. Come with Torsion zone: Torsion bits take-up torque peaks and absorb them in the Torsion zone. This prevents premature wear and extends the service life of the bit. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Suitable for Pozidriv screws Stainless Steel Bits Solution to the extraneous rust problem: fasten stainless screws with stainless tools Vacuum ice-hardened Torsion design against premature wear Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Stainless steel for minimising rust, special torsion-style design to reduce premature wear. Take it easy tool finder: Output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located. Features and benefits Stainless steel has the property of not rusting. However, if tools made out of conventional steel are used for stainless steel components or screws, the particles left behind from these tools can adhere to the surface and then rust. This effect - known as extraneous rust - can impair the visual appearance and even cause structural damage that may result in expensive repair work. The wear particles that cause this rust effect can be prevented by using stainless steel tools. Wera stainless steel bits are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel bits from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Torsion bits (T) absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 3855/1 TS SB bits, stainless, PZ 1 x 25 mm kts: bit Pozidriv, stainless steel, PZ 1 x 25 mm kpn: 3855/1 TS SB SiS kpn_dash: kpn_clear: 38551TSSBSiS bkpn: WERA 3855/1 TS SB SiS bkpn_clear: WERA 38551TSSBSiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073613001 sr_ns: WERA05073613001
r: 02828265 p: 6.87 pid: 42159 b: WERA q: 0 st: lt: 12 ean: 4013288112149 sr: WERA 05073611001 sr_no_br: 05073611001 sr_no_br_cl: 05073611001 sr_cl: WERA05073611001 sr_dash: sold: 34.35 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 Quantity per blister 1 n: WERA 3851/1 TS SB SiS bit Phillips, stainless steel, PH 2 x 25 mm - 05073611001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits out of stainless steel for cross-recess screws. Wera stainless are made out of stainless steel which prevents the formation of unsightly extraneous rust. Come with Torsion zone: Torsion bits take-up torque peaks and absorb them in the Torsion zone. This prevents premature wear and extends the service life of the bit. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For Phillips screws Stainless Steel Bits Solution to the extraneous rust problem: fasten stainless screws with stainless tools Vacuum ice-hardened Torsion design against premature wear Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Stainless steel for minimising rust, special torsion-style design to reduce premature wear. Take it easy tool finder: Output colour coding (red = Phillips) and large stamp to enable the desired bit to be easily located. Features and benefits Stainless steel has the property of not rusting. However, if tools made out of conventional steel are used for stainless steel components or screws, the particles left behind from these tools can adhere to the surface and then rust. This effect - known as extraneous rust - can impair the visual appearance and even cause structural damage that may result in expensive repair work. The wear particles that cause this rust effect can be prevented by using stainless steel tools. Wera stainless steel bits are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel bits from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Torsion bits (T) absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 3851/1 TS SB bits, stainless, PH 2 x 25 mm kts: bit Phillips, stainless steel, PH 2 x 25 mm kpn: 3851/1 TS SB SiS kpn_dash: kpn_clear: 38511TSSBSiS bkpn: WERA 3851/1 TS SB SiS bkpn_clear: WERA 38511TSSBSiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073611001 sr_ns: WERA05073611001
r: 87010085 p: 2.79 pid: 70716 b: WERA q: 12 st: 1 lt: 1 ean: 4013288015815 sr: WERA 05066320001 sr_no_br: 05066320001 sr_no_br_cl: 05066320001 sr_cl: WERA05066320001 sr_dash: sold: 33.48 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 40 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T40 n: WERA 867/1 TZ TORX bit, TX 40 x 25 mm - 05066320001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For recessed TORX® screws Torsion design against premature wear Prevents premature breakage of the drive tip Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Torsion-style design to reduce premature wear, tough, for universal use Features and benefits TZ-Bits are tough bits with a torsion zone. Torsion bits absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/1 TZ TORX® bits, TX 40 x 25 mm kts: bit, TX 40 x 25 mm kpn: 867/1 TZ TORX kpn_dash: kpn_clear: 8671TZTORX bkpn: WERA 867/1 TZ TORX bkpn_clear: WERA 8671TZTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066320001 sr_ns: WERA05066320001
r: 02800024 p: 6.69 pid: 46000 b: WERA q: 0 st: lt: 9 ean: 4013288156211 sr: WERA 05380201001 sr_no_br: 05380201001 sr_no_br_cl: 05380201001 sr_cl: WERA05380201001 sr_dash: sold: 33.45 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" Connection profile (bit) Hexagonal VDE approved No Bit tip PH0 Drive profile size (bit) 0 n: WERA 851/4 J bit Phillips, PH 0 x 89 mm - 05380201001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits, optimised for Asian PH screws. In particular, for applications with very small dimensions pursuant to the Japanese Camera Industrial Standard. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For Phillips screws Optimised for Japanese Phillips screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits J stands for Japan. J bits have been optimised to suit Asian PH screws. In particular, they are for use with very small dimensions as set out in the Japanese Camera Standard. ds: dsc: Scope of delivery 851/4 J bits, PH 0 x 89 mm kts: bit Phillips, PH 0 x 89 mm kpn: 851/4 J kpn_dash: kpn_clear: 8514J bkpn: WERA 851/4 J bkpn_clear: WERA 8514J c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05380201001 sr_ns: WERA05380201001
r: 02318088 p: 1.67 pid: 44515 b: WERA q: 0 st: lt: 10 ean: 4013288030368 sr: WERA 05066489001 sr_no_br: 05066489001 sr_no_br_cl: 05066489001 sr_cl: WERA05066489001 sr_dash: sold: 33.4 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 27 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T27 n: WERA 867/1 TORX bit, TX 27 x 25 mm - 05066489001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for TORX® socket screws. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For recessed TORX® screws 1/4" hexagon drive (Wera connecting series 1) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design For universal use Features and benefits ds: dsc: Scope of delivery 867/1 TORX® bits, TX 27 x 25 mm kts: bit, TX 27 x 25 mm kpn: 867/1 TORX kpn_dash: kpn_clear: 8671TORX bkpn: WERA 867/1 TORX bkpn_clear: WERA 8671TORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066489001 sr_ns: WERA05066489001
r: 02823353 p: 1.67 pid: 45243 b: WERA q: 0 st: lt: 8 ean: 4013288030351 sr: WERA 05066488001 sr_no_br: 05066488001 sr_no_br_cl: 05066488001 sr_cl: WERA05066488001 sr_dash: sold: 33.4 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 25 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T25 n: WERA 867/1 TORX bit, TX 25 x 25 mm - 05066488001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for TORX® socket screws. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For recessed TORX® screws 1/4" hexagon drive (Wera connecting series 1) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design For universal use Features and benefits ds: dsc: Scope of delivery 867/1 TORX® bits, TX 25 x 25 mm kts: bit, TX 25 x 25 mm kpn: 867/1 TORX kpn_dash: kpn_clear: 8671TORX bkpn: WERA 867/1 TORX bkpn_clear: WERA 8671TORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066488001 sr_ns: WERA05066488001
r: 02828498 p: 11.09 pid: 42489 b: WERA q: 7 st: 1 lt: 1 ean: 4013288158529 sr: WERA 05073965001 sr_no_br: 05073965001 sr_no_br_cl: 05073965001 sr_cl: WERA05073965001 sr_dash: sold: 33.27 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 25 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T25 Quantity per blister 1 n: WERA 867/4 IMP DC SB SIS TORX bit, TX 25 x 50 mm - 05073965001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX® screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For recessed TORX® screws Impaktor technology for above-average service life Particularly suitable for use with customary impact drivers Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out 1/4" hexagon drive (Wera connecting series 4) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design The Impaktor technology ensures an above-average service life even under extreme conditions thanks to a best-possible utilisation of the material properties and optimally designed geometry, particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance. Take it easy tool finder: Output colour coding (green = TORX®) and large stamp to enable the desired bit to be easily located. Features and benefits For an above-average service life. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Another product advantage is the coating of the Impaktor bits with minute diamond particles. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. For use with impact screwdrivers. Improve productivity when screwdriving with power tools. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Particularly high strength. Reduce the danger of premature bit breakage. Torsion zone specially designed to absorb such forces and thereby protect the bit tip. Another product advantage is the coating of the Impaktor bits with minute diamond particles. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 867/4 IMP DC SB Impaktor bits, TX 25 x 50 mm kts: bit, TX 25 x 50 mm kpn: 867/4 IMP DC SB SIS TORX kpn_dash: kpn_clear: 8674IMPDCSBSISTORX bkpn: WERA 867/4 IMP DC SB SIS TORX bkpn_clear: WERA 8674IMPDCSBSISTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073965001 sr_ns: WERA05073965001
r: 02818380 p: 3.3 pid: 44482 b: WERA q: 0 st: lt: 6 ean: 4013288032799 sr: WERA 05135009001 sr_no_br: 05135009001 sr_no_br_cl: 05135009001 sr_cl: WERA05135009001 sr_dash: sold: 33 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 n: WERA 851/1 RZ PH bit Phillips, PH 2 x 25 mm - 05135009001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for drywall screws. Reduced shaft diameter for low-lying screw connections. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For Phillips screws With reduced shaft diameter Particularly suitable for drywall screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Drywall screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Reduced shaft diameter, tough, for universal use Features and benefits Bits with reduced shaft diameter ensure that screws can be sunk without damaging the surface. This is particularly necessary in drywall construction applications. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 851/1 RZ bits, PH 2 x 25 mm kts: bit Phillips, PH 2 x 25 mm kpn: 851/1 RZ PH kpn_dash: kpn_clear: 8511RZPH bkpn: WERA 851/1 RZ PH bkpn_clear: WERA 8511RZPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05135009001 sr_ns: WERA05135009001
r: 02823418 p: 6.59 pid: 45252 b: WERA q: 0 st: lt: 9 ean: 4013288125859 sr: WERA 05073346001 sr_no_br: 05073346001 sr_no_br_cl: 05073346001 sr_cl: WERA05073346001 sr_dash: sold: 32.95 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 50 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T50 Quantity per blister 2 n: WERA 867/1 SB SIS TORX bit, TX 50 x 35 mm - 05073346001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX® screws. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For recessed TORX® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design For universal use Features and benefits ds: dsc: Scope of delivery 867/1 SB TORX® bits, TX 50 x 35 mm kts: bit, TX 50 x 35 mm kpn: 867/1 SB SIS TORX kpn_dash: kpn_clear: 8671SBSISTORX bkpn: WERA 867/1 SB SIS TORX bkpn_clear: WERA 8671SBSISTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073346001 sr_ns: WERA05073346001
r: 02822734 p: 6.55 pid: 45487 b: WERA q: 8 st: 1 lt: 1 ean: 4013288158383 sr: WERA 05073921001 sr_no_br: 05073921001 sr_no_br_cl: 05073921001 sr_cl: WERA05073921001 sr_dash: sold: 32.75 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ2 Quantity per blister 1 n: WERA 855/1 IMP DC SB SiS bit Pozidriv, PZ 2 x 25 mm - 05073921001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for Pozidriv* screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. * Pozidriv = registered trademark of European Industrial Service Ltd. Suitable for Pozidriv screws Impaktor technology for above-average service life Particularly suitable for use with customary impact drivers Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out 1/4" hexagon drive (Wera connecting series 1) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design The Impaktor technology ensures an above-average service life even under extreme conditions thanks to a best-possible utilisation of the material properties and optimally designed geometry, particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance. Take it easy tool finder: Output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located. Features and benefits Impaktor technology for an above-average service life even under extreme demands For an above-average service life. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Another product advantage is the coating of the Impaktor bits with minute diamond particles. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. For use with impact screwdrivers. Improve productivity when screwdriving with power tools. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Particularly high strength. Reduce the danger of premature bit breakage. Torsion zone specially designed to absorb such forces and thereby protect the bit tip. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 855/1 IMP DC SB Impaktor bits, PZ 2 x 25 mm kts: bit Pozidriv, PZ 2 x 25 mm kpn: 855/1 IMP DC SB SiS kpn_dash: kpn_clear: 8551IMPDCSBSiS bkpn: WERA 855/1 IMP DC SB SiS bkpn_clear: WERA 8551IMPDCSBSiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073921001 sr_ns: WERA05073921001
r: 02822768 p: 6.47 pid: 45179 b: WERA q: 0 st: lt: 16 ean: 4013288029362 sr: WERA 05073336001 sr_no_br: 05073336001 sr_no_br_cl: 05073336001 sr_cl: WERA05073336001 sr_dash: sold: 32.35 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ1 Quantity per blister 1 n: WERA 855/1 BDC SB SiS bit Pozidriv, PZ 1 x 25 mm - 05073336001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Bits for Pozidriv* screws with tiny diamond particles on the bit tip. This ensures a secure fit of the bit in the screw, reduces the contact pressure required and lowers the risk of slipping. Comes with Torsion zone where kinetic energy is diverted from peak loads. This greatly extends the product service life; 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. * Pozidriv = registered trademark of European Industrial Service Ltd. Suitable for Pozidriv screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out 1/4" hexagon drive (Wera connecting series 1) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design BiTorsion for long service life, diamond-coated for secure screw fit. Take it easy tool finder: Output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located. Features and benefits Particularly when applications involve sensitive materials or high quality surfaces are involved, bits with a diamond coating ensure that work is done safer, faster and at lower cost. Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. One of the greatest problems with power tool applications is that the conventional bit easily slips out of the head of the screw (cam-out). This often destroys both the head of the screw and the tool. High resulting costs are incurred e.g. from damaged surfaces and screw connections that can no longer be loosened. Screwdriving will become safer and more economic if this problem of slipping can be minimised. Today, the Wera diamond bit - manufactured with the technology specifically developed by Wera for this application - still sets the standard in terms of resilience and functionality. Wera bits with a diamond coating ensure a secure fit of the bit in the screw head. The minute diamond particles applied to the tip of the tool literally "bite" into the screw and ensure an exact, anti-slip fit in the head of the screw. This secure fit protects the screw. The cam-out forces which compel the user to apply greater pressure to the screw are considerably reduced. Ideal for sensitive materials The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 855/1 BDC SB bits, PZ 1 x 25 mm kts: bit Pozidriv, PZ 1 x 25 mm kpn: 855/1 BDC SB SiS kpn_dash: kpn_clear: 8551BDCSBSiS bkpn: WERA 855/1 BDC SB SiS bkpn_clear: WERA 8551BDCSBSiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073336001 sr_ns: WERA05073336001
r: 02822771 p: 6.47 pid: 45066 b: WERA q: 0 st: lt: 16 ean: 4013288029379 sr: WERA 05073337001 sr_no_br: 05073337001 sr_no_br_cl: 05073337001 sr_cl: WERA05073337001 sr_dash: sold: 32.35 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ2 Quantity per blister 1 n: WERA 855/1 BDC SB SiS bit Pozidriv, PZ 2 x 25 mm - 05073337001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Bits for Pozidriv* screws with tiny diamond particles on the bit tip. This ensures a secure fit of the bit in the screw, reduces the contact pressure required and lowers the risk of slipping. Comes with Torsion zone where kinetic energy is diverted from peak loads. This greatly extends the product service life; 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. * Pozidriv = registered trademark of European Industrial Service Ltd. Suitable for Pozidriv screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out 1/4" hexagon drive (Wera connecting series 1) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design BiTorsion for long service life, diamond-coated for secure screw fit. Take it easy tool finder: Output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located. Features and benefits Particularly when applications involve sensitive materials or high quality surfaces are involved, bits with a diamond coating ensure that work is done safer, faster and at lower cost. Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. One of the greatest problems with power tool applications is that the conventional bit easily slips out of the head of the screw (cam-out). This often destroys both the head of the screw and the tool. High resulting costs are incurred e.g. from damaged surfaces and screw connections that can no longer be loosened. Screwdriving will become safer and more economic if this problem of slipping can be minimised. Today, the Wera diamond bit - manufactured with the technology specifically developed by Wera for this application - still sets the standard in terms of resilience and functionality. Wera bits with a diamond coating ensure a secure fit of the bit in the screw head. The minute diamond particles applied to the tip of the tool literally "bite" into the screw and ensure an exact, anti-slip fit in the head of the screw. This secure fit protects the screw. The cam-out forces which compel the user to apply greater pressure to the screw are considerably reduced. Ideal for sensitive materials The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 855/1 BDC SB bits, PZ 2 x 25 mm kts: bit Pozidriv, PZ 2 x 25 mm kpn: 855/1 BDC SB SiS kpn_dash: kpn_clear: 8551BDCSBSiS bkpn: WERA 855/1 BDC SB SiS bkpn_clear: WERA 8551BDCSBSiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073337001 sr_ns: WERA05073337001
r: 02818172 p: 6.446 pid: 43838 b: WERA q: 0 st: lt: 13 ean: 4013288155481 sr: WERA 05059661001 sr_no_br: 05059661001 sr_no_br_cl: 05059661001 sr_cl: WERA05059661001 sr_dash: sold: 32.23 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 89 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 3/32" Drive profile size (bit) 3/32" Product Range Wera Hex-Plus n: WERA 840/4 Z Hex-Plus hexagon bit, 3/32" x 89 mm - 05059661001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z bits, 3/32" x 89 mm kts: hexagon bit, 3/32" x 89 mm kpn: 840/4 Z Hex-Plus kpn_dash: 840/4 Z Hex kpn_clear: 8404ZHexPlus bkpn: WERA 840/4 Z Hex-Plus bkpn_clear: WERA 8404ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05059661001 sr_ns: WERA05059661001
r: 08085380 p: 6.44 pid: 70143 b: WERA q: 0 st: lt: 8 ean: 4013288222398 sr: WERA 05018140001 sr_no_br: 05018140001 sr_no_br_cl: 05018140001 sr_cl: WERA05018140001 sr_dash: sold: 32.2 p_range: none type: standard act: 1 avo: 1 av: Length 70 mm Drive profile size (bit) 4 mm Blade thickness 0,8 mm Type of drive profile (bit) Slotted Connection size (bit) 1/4" VDE approved No Bit tip Slotted 4 mm n: WERA 800 S slotted bit for impact screwdriver, 0.8 x 4 x 70 mm - 05018140001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Extra tough bit for slotted screws. This prevents the bit from breaking prematurely and extends its service life. Suitable for use with Wera impact screwdriver 921. With 1/4" hexagonal drive. For slotted screws Extra tough for long durability 1/4" hexagon drive For use with Wera impact screwdriver 921 Application Slotted screws; for use with impact screwdriver 921 Drive 1/4" hexagonal Design Extra tough Features and benefits The 921 impact screwdriver combines the advantages of manual impact wrenches, compact tools and screwdrivers with pound-thru blade. The Wera impact screwdriver bits are particularly suitable for use with the Wera 921 impact screwdriver. The extra tough bits stand out with their particularly long service life. Premature breakage is prevented. ds: dsc: Scope of delivery 800 S Slotted bits for impact screwdrivers, 0.8 x 4 x 70 mm kts: slotted bit for impact screwdriver, 0.8 x 4 x 70 mm kpn: 800 S kpn_dash: kpn_clear: 800S bkpn: WERA 800 S bkpn_clear: WERA 800S c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05018140001 sr_ns: WERA05018140001
r: 08108045 p: 10.71 pid: 159635 b: WERA q: 0 st: lt: 8 ean: 4013288228727 sr: WERA 05006530001 sr_no_br: 05006530001 sr_no_br_cl: 05006530001 sr_cl: WERA05006530001 sr_dash: sold: 32.13 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness Type of drive profile (bit) Pozidriv/Slotted Connection size (bit) 9 mm Connection profile (bit) Hexagonal VDE approved Yes Bit tip SL/PZ1 Drive profile size (bit) 1 Product Range Wera Kraftform Kompakt n: WERA 05006530001 Kraftform Kompakt VDE inserts for PlusMinus screws slotted/ Pozidriv 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE blade for the Kraftform Kompakt handle/interchangeable blade system. Combination profile slotted and Pozidriv, especially for use with clips, fuse boxes, switches, relays. Lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Reduced blade diameter with integrated protective insulation, low-lying screw and spring elements can be easily reached and operated. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. With Take it easy tool finder: colour coding by profile and laser-engraved size indication. The hexagon anti-roll protection avoids blades from rolling away unintentionally. Kraftform Kompakt VDE blade for PlusMinus screws slotted/Pozidriv Reduced shaft diameter and integrated insulation protection Insulated, individually tested as per IEC 60900 9 mm hex drive with with entry chamfer Black Point tip for enhanced corrosion protection and an exact fit Application PlusMinus screws slotted/Pozidriv Blade Reduced blade diameter with integrated protective insulation, low lying PlusMinus screws can be easily reached and operated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Burnished, Black Point tip, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Testing the tool for dielectric strength at 10,000 volt gives the user the peace of mind that their tool has been tested for its most important property, insulation. Wera VDE tools are subjected to this test piece by piece which guarantees safe working at up to 1,000 volt. The 157 mm length blades are suitable for Wera Kraftform bitholding screwdrivers 7400 VDE, 837 i RA, 827 T i and 817 VDE. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE 65 iS PZ/S Take it easy, # 1 x 157 mm kts: Kraftform Kompakt VDE inserts for PlusMinus screws slotted/ Pozidriv 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006530001 kpn_dash: kpn_clear: 05006530001 bkpn: WERA 05006530001 bkpn_clear: WERA 05006530001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006530001 sr_ns: WERA05006530001
r: 02059342 p: 10.66 pid: 42134 b: WERA q: 0 st: lt: 11 ean: 4013288031426 sr: WERA 05060031001 sr_no_br: 05060031001 sr_no_br_cl: 05060031001 sr_cl: WERA05060031001 sr_dash: sold: 31.98 p_range: none type: standard act: 1 avo: 1 av: Length 127 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ1 n: WERA 855/4 Z PZ bit Pozidriv, PZ 1 x 127 mm - 05060031001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for Pozidriv* screws. Tough, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. * Pozidriv = registered trademark of the company European Industrial Service Ltd. Suitable for Pozidriv screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 855/4 Z bits, PZ 1 x 127 mm kts: bit Pozidriv, PZ 1 x 127 mm kpn: 855/4 Z PZ kpn_dash: kpn_clear: 8554ZPZ bkpn: WERA 855/4 Z PZ bkpn_clear: WERA 8554ZPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05060031001 sr_ns: WERA05060031001
r: 02824927 p: 7.933 pid: 46899 b: WERA q: 0 st: lt: 12 ean: 4013288104526 sr: WERA 05066950001 sr_no_br: 05066950001 sr_no_br_cl: 05066950001 sr_cl: WERA05066950001 sr_dash: sold: 31.732 p_range: none type: standard act: 1 avo: 1 av: Length 70 mm Drive profile size (bit) 50 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 5/16" VDE approved No Bit tip T50 n: WERA 867/2 Z TORX bit, TX 50 x 70 mm - 05066950001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX® screws. Tough viscous for universal use. 5/16" hexagon, suitable for holders as per DIN ISO 1173-D 8. For recessed TORX® screws Tough for hard materials 5/16" hexagon drive (Wera connecting series 2) Application TORX® socket screws Drive 5/16" hexagon, suitable for DIN ISO 1173-D 8 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/2 Z TORX® bits, TX 50 x 70 mm kts: bit, TX 50 x 70 mm kpn: 867/2 Z TORX kpn_dash: kpn_clear: 8672ZTORX bkpn: WERA 867/2 Z TORX bkpn_clear: WERA 8672ZTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066950001 sr_ns: WERA05066950001
r: 02801824 p: 3.17 pid: 44224 b: WERA q: 0 st: lt: 12 ean: 4013288034281 sr: WERA 05056712001 sr_no_br: 05056712001 sr_no_br_cl: 05056712001 sr_cl: WERA05056712001 sr_dash: sold: 31.7 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ2 n: WERA 855/1 BTH PZ bit Pozidriv, PZ 2 x 25 mm - 05056712001 cn: BIT cn2: BIT cn_clear: BIT d: Product description BiTorsion bits for Pozidriv* screws with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Best possible service life with the matching holder. Extra-hard design. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. * Pozidriv = registered trademark of the company European Industrial Service Ltd. Suitable for Pozidriv screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Particularly hard for semi-hard materials 1/4" hexagon drive (Wera connecting series 1) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design BiTorsion for long service life, extra-hard. Take it easy tool finder: Output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located. Features and benefits BTH-Bits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 855/1 BTH bits, PZ 2 x 25 mm kts: bit Pozidriv, PZ 2 x 25 mm kpn: 855/1 BTH PZ kpn_dash: kpn_clear: 8551BTHPZ bkpn: WERA 855/1 BTH PZ bkpn_clear: WERA 8551BTHPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056712001 sr_ns: WERA05056712001
r: 02815512 p: 1.57 pid: 44847 b: WERA q: 0 st: lt: 8 ean: 4013288010940 sr: WERA 05072057001 sr_no_br: 05072057001 sr_no_br_cl: 05072057001 sr_cl: WERA05072057001 sr_dash: sold: 31.4 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Blade thickness 0,8 mm Type of drive profile (bit) Slotted Connection size (bit) 1/4" VDE approved No Bit tip Slotted 5,5 mm Drive profile size (bit) 5,5 mm n: WERA 800/1 Z slotted screw bit, 0.8 x 5.5 x 25 mm - 05072057001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough viscous Wera bits for slotted screws and universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For slotted screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Slotted screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 800/1 Z bits, 0.8 x 5.5 x 25 mm kts: slotted screw bit, 0.8 x 5.5 x 25 mm kpn: 800/1 Z kpn_dash: kpn_clear: 8001Z bkpn: WERA 800/1 Z bkpn_clear: WERA 8001Z c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05072057001 sr_ns: WERA05072057001
r: 02815510 p: 1.57 pid: 44237 b: WERA q: 0 st: lt: 12 ean: 4013288010957 sr: WERA 05072059001 sr_no_br: 05072059001 sr_no_br_cl: 05072059001 sr_cl: WERA05072059001 sr_dash: sold: 31.4 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Blade thickness 1 mm Type of drive profile (bit) Slotted Connection size (bit) 1/4" VDE approved No Bit tip Slotted 5,5 mm Drive profile size (bit) 5,5 mm n: WERA 800/1 Z slotted screw bit, 1 x 5.5 x 25 mm - 05072059001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough viscous Wera bits for slotted screws and universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For slotted screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Slotted screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 800/1 Z bits, 1 x 5.5 x 25 mm kts: slotted screw bit, 1 x 5.5 x 25 mm kpn: 800/1 Z kpn_dash: kpn_clear: 8001Z bkpn: WERA 800/1 Z bkpn_clear: WERA 8001Z c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05072059001 sr_ns: WERA05072059001
