WERA 845/8 countersink bit set 8-piece - 05104655001

With the Wera 845/8 countersink bit set, you can easily seat screw heads flush in wood, plastic, and sheet metal. The 6 1-flute countersink bits provide efficient chip removal and guarantee chatter-free, score-free chamfering and deburring. Thanks to the universal 1/4" hexagon drive and the Rapidaptor quick-release chuck, you can switch between hand driving and power tool use in seconds without extra tools. The ergonomic Kraftform handle and universal bit holder give you optimal torque transfer and precise control on every installation task.

Scope of delivery

• 845/8 1-flute Countersink Bits Set, 8 pieces
• 1x 816 R Bitholding screwdriver with Rapidaptor quick-release chuck: 1/4" x 119 mm
• 1x 888/4/1 K Rapidaptor Universal Bit Holder: 1/4" x 50 mm
• 6x 845 1-flute Countersink Bits: 6.30x32 mm, 8.30x32 mm, 10.40x34 mm, 12.40x36 mm, 16.50x40 mm, 20.50x43 mm

Product description

8-piece countersink bit set in a stable plastic box for countersinking and deburring. The hexagonal shaft ensures very good power transfer. Ensures rattle and score-free working. Perfect chip removal and great durability. High quality, ergonomic bit holder equipped with a magnet. The Rapidaptor ensures rapid bit change without any extra tools. For insertion in the power screwdriver or for use in the chuck of the electric drill.

• Ideal for mobile repair and assembly work
• Rapid, uncomplicated change between drill, countersinking or screwdriving bit
• 1/4" drive suitable for power screwdrivers
• For countersinking and deburring
• 1-flute

Features and benefits

• 1-flute countersink bits, 90°
  • Application: Deburring, chamfering and countersinking
  • 1/4" drive suitable for holders as per DIN 3126-D 6.3 (ISO 1173)
  • Hexagon shaft for very high torque transfer
  • 1 tip
  • Guaranteed vibration-free and scratch-free operation
  • Optimal countersink surface quality
  • Long service life
  • Perfect chip removal
  • High corrosion protection
• The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either.
• Lightning-fast bit change without any extra tools. One-handed operation. With fast-rotating sleeve for easy wielding of the screwdriver.
• The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits.
• The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free.
• Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools.
• Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres.
• The free-turning sleeve allows screw steadying at the start of the screwdriving process. This makes it easier to apply the tool to the screw and prevents slipping. It can also be used as a short extension for 1/4" applications e.g. in combination with the Wera Zyklop Ratchets.