- Max. working load: 250 kg
- Min. length (leg): 1180 mm
- Max. length (leg): 1880 mm
Aluminium hoisting tripods from 200 to 1000 kg, with or without winch
Lifting tripods are portable aluminium tripods for raising a load vertically above a well, manhole, shaft or any spot without a fixed lifting beam. They belong to the lifting devices, next to hoists, jacks and winches.
All the tripods in this category are Rema. Start with the working load: there are versions for 200, 250, 500 and 1000 kg. Take a model with some margin above the weight you lift most often, and allow for the weight of the lifting gear itself. The aluminium frame keeps the tripod light enough to set up and move on the job site.
Then decide whether you need a winch. A tripod with winch, recognisable by the DW versions, is ready to lift as soon as it stands. A tripod without winch, the D versions, is meant for hanging your own lifting device from it, for example a hoist with a working load that matches the tripod. Always set the legs on firm, level ground and check the locking before every use.
- Max. working load: 1000 kg
- Min. length (leg): 2400 mm
- Max. length (leg): 3000 mm
- Max. working load: 500 kg
- Min. length (leg): 2400 mm
- Max. length (leg): 3000 mm
- Max. working load: 500 kg
- Min. length (leg): 2100 mm
- Max. length (leg): 2500 mm
- Max. working load: 1000 kg
- Min. length (leg): 2250 mm
- Max. length (leg): 4000 mm
- Max. working load: 1000 kg
- Min. length (leg): 1780 mm
- Max. length (leg): 3000 mm
- Max. working load: 500 kg
- Min. length (leg): 1760 mm
- Max. length (leg): 3000 mm
- Max. working load: 200 kg
- Min. length (leg): 1180 mm
- Max. length (leg): 1880 mm
- Max. working load: 500 kg
- Min. length (leg): 1500 mm
- Max. length (leg): 2500 mm