Instant structural bonding with TEC7
- Instant grab without support: You mount heavy construction materials immediately without clamping or bracing thanks to the extreme initial adhesion up to 600 kg/m².
- Bonds on wet surfaces: You apply and seal seamlessly both indoors and outdoors, adhering firmly to dry as well as damp substrates.
- Permanently elastic and shockproof: The MS polymer formula absorbs vibrations and mechanical shocks, ensuring a durable and weather-resistant seal across diverse building materials.
With TEC7 X-Tack mounting adhesive, you can install heavy building materials immediately without clamping or temporary support. Thanks to the extreme initial grab of up to 600 kg/m², facade panels, stone cladding, and skirting boards stay firmly in place, even on vertical surfaces. The black ms polymer formula bonds reliably to both dry and damp substrates, indoors and outdoors. Because it is free from solvents and phthalates, it is safe to use on mirrors and natural stone. The bond remains permanently elastic, easily absorbing vibrations and mechanical shocks while resisting water and mould. The practical 290 ml cartridge ensures clean application for durable structural bonding.
Product description
EXTREME MOUNTING WITHOUT SUPPORT
- Extreme initial tack
- Vibration and impact resistant
- Also on wet substrates
- Perfect for vertical applications
- Super strong before curing: 600kg/m²
- Stable in adhesive thicknesses up to 40 mm
- Permanently elastic
- Free of phthalates, solvents and isocyanates
- Safe on mirrors, no marking on natural stone
- Almost odourless
- Also on damp, smooth surfaces
- Mould- and bacteria-resistant
- Water- and airtight
- Can be used on most building materials
Instructions
- Application temperature between -10°C and +40°C
- Apply to clean, dust- and grease-free substrates
- Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 polymers. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean
- Apply with hand or air pistol (best with telescopic piston)
- Due to the wide variety of different plastics and compositions, as well as materials prone to stress corrosion, preliminary tests are recommended
- Test adhesion to plastics, powdered paints, exotic woods and bituminous materials
- Reinforce weak and/or porous substrates first with Poxy Primer
- Due to the variety of lacquers and paints on the market, testing is recommended. The use of alkyd resin-based products may delay the drying process. Alkyd resin paints will cure with delay
- When bonding mirrors in sanitary facilities, only apply vertical bonding strips to avoid stagnating moisture caused by condensation
- When bonding mirrors in sanitary facilities, only apply vertical strips of adhesive to avoid stagnating moisture caused by condensation.
- The nozzle is equipped with a V-groove for perfect dispensing with the appropriate glue height, i.e. DO NOT TAPE DOWN
- When applying, position the nozzle vertically on the surface
- Easiest to spray with the Tec7 Multigun
- The strongest bonding with the fastest curing is achieved with adhesive strips (and not with adhesive dots)
