Product description
LIQUID MEMBRANE
- Durable water and wind sealing, even in difficult places
- Good adhesion to EPDM, tiles, metal roof materials
- 100% waterproof and UV-stable from 1 mm layer thickness
- Permanently flexible and walkable
- This MS hybrid polymer is easy to spread and quickly hardens into a tight membrane with a very long lifetime, suitable for repair, finishing and renovation of medium-sized roofs
- Can be applied horizontally and vertically to most roofing and building materials
- Can also be applied on slightly damp substrates and is rainproof after 2 hours
- Free of solvents and toxic substances
Instructions
- Apply to clean and stable substrate, which may be slightly moist
- Reinforce fragile or rusty surfaces with a coat of Poxy Primer
- Always reinforce weak spots, connections, seams and corners with glass fibre tape. Large surfaces (<4 m²)
- Reinforce with fibreglass mesh
- Apply with a brush or spatula, in one layer of at least 1 mm thickness
- Clean tools immediately with Tec7 Cleaner and your hands with Powerwipes. After curing remove only mechanically
- A surplus can be stored for a short time provided the bag in the pot is sealed airtight and air-free
- Test the adhesion on EPDM and plastics
- Discolouration and/or loss of adhesion may occur on bituminous materials, but can be applied to roofing treated with slate chippings
- Not suitable for permanent immersion
- Consumption for 1 mm thickness: 1 litre/m². Consumption varies with substrate roughness