What is Tec7 PUR Cleaner used for?

It is used for flushing PU foam guns and removing fresh, uncured polyurethane foam from tools and surfaces.

Does this aerosol can fit any PU foam gun?

Yes, it features a standard screw thread that fits standard PU foam application guns.

Can you use this cleaner without attaching it to a gun?

Yes, the included spray nozzle allows you to spray directly onto surfaces or onto a cleaning cloth.

Does it remove fully cured PU foam?

No, this solvent only removes uncured, wet foam. Cured polyurethane foam must be removed mechanically.

How do you flush and clean the inside of a foam gun?

Screw the can onto the closed gun, open the flow regulator wheel, and squeeze the trigger until clear liquid emerges.

TEC7 PUR Cleaner gun cleaner (500 ml spray) - 670801000

Name: TEC7 PUR Cleaner gun cleaner (500 ml spray) - 670801000
Brand: TEC7
SKU: 02313740
Price: 8.99 EUR
Availability: InStock

Supplier number: TEC7 670801000 | EAN 5414195670811

From 1 piece €8.99

From 12 pieces €8.54 - €5.39 saving

From 24 pieces €8.32 - €16.18 saving

From 36 pieces €8.09 - €32.37 saving

8.99 tax incl.

€7.43 excl. VAT (incl. all environmental contributions)

On stock - immediately available

Delivery by DHL

↓ Documents (2) ✆ Talk to a specialist

Fast maintenance with TEC7 PUR Cleaner

Practical benefits

Quick foam gun flushing: You screw the canister directly onto standard applicator guns to flush out internal uncured foam effortlessly.
Targeted manual residue removal: The included spray nozzle lets you clean fresh polyurethane foam easily from tools and nearby surfaces.
Long-term tool protection: Regular cleaning prevents stubborn internal blockages and keeps your applicator dispensing mechanism working smoothly.

In a nutshell

The right choise for

With the TEC7 pur cleaner, you keep your foam applicator gun and tools in optimal working condition. This 500 ml aerosol can screws directly onto standard foam guns to flush out uncured polyurethane foam residues thoroughly from the inside. This prevents internal blockages and ensures smooth dispensing performance. Thanks to the included spray nozzle, you can also easily target and remove fresh foam splatters from building materials, window frames, and tools, keeping your equipment clean and extending its service life.

Product information FAQ

€8.99

In stock - tax incl.

Key features according to our expert

Net volume: 500 ml
EUH-statements: EUH066
ADR packing group: Not applicable
ADR class: 2
Principal hazard property: GHS02 Flammable
UN number: UN1950
P-statements: P101; P102; P210; P211; P251; P280; P405; P410 + P412; P501
H-statements: H222; H229; H319; H336
Hazard class: GHS02 Flammable; GHS07 Harmful or irritant
Physical state: Aerosol
Packaging: Spray can

Product description

GUN CLEANER / REMOVAL OF UNCURED FOAM

Easy to use
For any gun with standard thread
Suitable for SprayTec and all PU foams
Easy to use
Suitable for all PU foams

Instructions

1. Cleaning the Spray & PUR gun: fully close the dose button on the gun and screw Spray & PUR
Cleaner firmly on the spray gun. Screw
The dosing knob
Off and fully depress the lever of the gun. Release the lever when Spray & Pur Cleaner comes out of the gun and allow the cleaner to take effect for at least 2 minutes
Operate the gun for a few seconds, until clean Spray & PUR Cleaner comes out. Fully close the dosage knob again and unscrew the Spray & Pur Cleaner. Clean the ring thoroughly and remove the remaining product from the gun. Remove the remaining foam from the head of the PUR canister
2. Removing uncured PUR foam. Fit the nozzle provided. Test the resistance of the surface in a low or non-visible area. Apply Spray & Pur Cleaner to a cloth and clean the surface with it. Repeat if necessary

Precautionary statements

P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211: Do not spray on an open flame or other ignition source.
P251: Do not pierce or burn, even after use.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P405: Store locked up.
P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/ 122°F.
P501: Dispose of contents/container to ... (see safety data sheet).

Hazard statements

H222: Extremely flammable aerosol.
H229: Pressurised container: May burst if heated.
H319: Causes serious eye irritation.
H336: May cause drowsiness or dizziness.

Supplemental hazard information

EUH066: Repeated exposure may cause skin dryness or cracking.

Documents

⤓ Technical data sheet PDF ⤓ Safety sheet PDF

All Features

Net volume: 500 ml
Euh-statements: EUH066
Adr packing group: Not applicable
Adr class: 2
Principal hazard property: GHS02 Flammable
Un number: UN1950
P-statements: P101; P102; P210; P211; P251; P280; P405; P410 + P412; P501
H-statements: H222; H229; H319; H336
Hazard class: GHS02 Flammable; GHS07 Harmful or irritant
Physical state: Aerosol
Packaging: Spray can

Brand TEC7
02313740
EAN 5414195670811
Supplier number TEC7 670801000

Frequently asked questions about this product

Answered by specialists

What is Tec7 PUR Cleaner used for?: It is used for flushing PU foam guns and removing fresh, uncured polyurethane foam from tools and surfaces.
Does this aerosol can fit any PU foam gun?: Yes, it features a standard screw thread that fits standard PU foam application guns.
Can you use this cleaner without attaching it to a gun?: Yes, the included spray nozzle allows you to spray directly onto surfaces or onto a cleaning cloth.
Does it remove fully cured PU foam?: No, this solvent only removes uncured, wet foam. Cured polyurethane foam must be removed mechanically.
How do you flush and clean the inside of a foam gun?: Screw the can onto the closed gun, open the flow regulator wheel, and squeeze the trigger until clear liquid emerges.