r: 02313753 p: 35.371 pid: 121604 b: TEC7 q: 20 st: 1 lt: 1 ean: 5414195670910 sr: TEC7 670901000 sr_no_br: 670901000 sr_no_br_cl: 670901000 sr_cl: TEC7670901000 sr_dash: sold: 7498.652 p_range: none type: standard act: 1 avo: 1 av: For max. content 750 ml Gun type Foam gun n: TEC7 670901000 spray & PUR foam gun cn: GUN cn2: GUN cn_clear: GUN d: Product description NO-STICK PUR GUN Perfect dosing Non-stick coating Easy to clean Spray & PUR Gun can be used with most PU foams in aerosol on the market With the Spray & PUR Gun, the PU foam can be dosed in a controlled way. This allows precise filling of joints and fitting of doors and windows in a fast, easy and safe way A long spray nozzle, which can be additionally extended, allows you to work even in hard-to-reach places Spray & PUR Gun can be cleaned quickly and easily with Spray & PUR Cleaner Instructions Check the functioning of the gun Shake PUR well before use Quickly screw canister onto gun Squeeze the trigger to fill the barrel Use dose screw to regulate flow rate Clean the canister and gun valve immediately with Spray & PUR Cleaner as directed for later use. For short breaks in work, close the dosing screw completely Change in viscosity of foam indicates poor sealing of the needle packing canister. In this case, remove the foam residue immediately with Spray & PUR Cleaner and tighten the control screw on the needle packing bushing more firmly with an 8mm spanner so that the packing seals again. Test the free movement of the needle and lubricate if necessary ds: dsc: kts: spray & PUR foam gun kpn: 670901000 kpn_dash: kpn_clear: 670901000 bkpn: TEC7 670901000 bkpn_clear: TEC7 670901000 c_path: Home / Tools / Hand tools / Paint, glue, and sealing tools / Gluing and sealing tools / Gun | Home / Our brands / Tec7 / Tec7 tools / Tec7 hand tools / Tec7 paint, glue, and sealing tools / Tec7 gluing and sealing tools / Tec7 gun sr_no_br_cl_ns: 670901000 sr_ns: TEC7670901000
r: 02313449 p: 19.504 pid: 122536 b: TEC7 q: 8 st: 1 lt: 1 ean: 5414195315200 sr: TEC7 315200000 sr_no_br: 315200000 sr_no_br_cl: 315200000 sr_cl: TEC7315200000 sr_dash: sold: 6007.232 p_range: none type: standard act: 1 avo: 1 av: For max. content 310 ml Gun type Cartridge gun n: TEC7 315200000 professional tube gun 310 ml cn: GUN cn2: GUN cn_clear: GUN d: Product description PROFESSIONAL ERGONOMIC TUBE GUN Ergonomic design High power transmission Long service life The Tec Gun is used for spraying most tubular products, regardless of viscosity, and even 2-component products, due to its 18:1 pump ratio The Tec Gun has a pre-release option that allows for a clean finish The Tec Gun features a stainless steel connecting rod with suspension hook The Tec Gun is ergonomic to use thanks to its perfect balance and a rotating stock to position the nozzle in the correct position Instructions Cut open the cartridge and screw on the nozzle Cut the nozzle to the desired flow rate Insert the cartridge into the holder (plunger is at the back) The red lip on the shutter offers two options: down for continuous pressure, appropriate when processing hard products such as X-Tack, and up for a slight retraction to limit the flow of softer products such as X-Seal ds: dsc: kts: professional tube gun 310 ml kpn: 315200000 kpn_dash: kpn_clear: 315200000 bkpn: TEC7 315200000 bkpn_clear: TEC7 315200000 c_path: Home / Tools / Hand tools / Paint, glue, and sealing tools / Gluing and sealing tools / Gun | Home / Our brands / Tec7 / Tec7 tools / Tec7 hand tools / Tec7 paint, glue, and sealing tools / Tec7 gluing and sealing tools / Tec7 gun sr_no_br_cl_ns: 315200000 sr_ns: TEC7315200000
r: 08102645 p: 39.173 pid: 165563 b: TEC7 q: 2 st: 1 lt: 1 ean: 5414195020845 sr: TEC7 315301260 sr_no_br: 315301260 sr_no_br_cl: 315301260 sr_cl: TEC7315301260 sr_dash: sold: 352.557 p_range: none type: standard act: 1 avo: 1 av: For max. content 400 ml Gun type Cartridge/sausage gun n: TEC7 315301260 OMNIGUN tube gun with adjustable force transmission cn: GUN cn2: GUN cn_clear: GUN d: Product description CAULKING GUN WITH ADJUSTABLE FORCE TRANSMISSION Stepless force adjustment from 12/1 to 25/1 For light sealants and heavy-duty adhesives in standard tube or sausage (400ml) Ergonomic lightweight design Rotatable tube holder Gun with infinitely adjustable power transmission from 12/1 for clean application of light, flexible sealant to 25/1 for easy pumping of heavy adhesive, 2K adhesive or chemical anchor and everything in between depending on the application Heavy duty materials for long life and treated steel connecting rod with suspension hook Instructions Cartridge: cut open the cartridge and screw on the nozzle Cut off the nozzle according to the desired flow rate Insert the cartridge into the holder (piston is at the back) Turn the adjustment knob to the desired position Sausage: unscrew the entire holder Screw the black attachment onto the steel connecting rod Screw the holder onto the Omnigun again Insert the sausage into the tube and cut it open behind the metal washer Insert the prick adaptor into the outlet nut Close the tube with the nut and attach the nozzle to the prick adaptor Turn the adjusting knob to the desired position The sausage can be removed from the gun after use and re-used later provided the adaptor with nozzle remains on the sausage The gear ratio can be read off to the side below the adjusting knob:12/1: X-Seal - 18/1: Tec7 - 25/1: X-Tack ds: dsc: kts: OMNIGUN tube gun with adjustable force transmission kpn: 315301260 kpn_dash: kpn_clear: 315301260 bkpn: TEC7 315301260 bkpn_clear: TEC7 315301260 c_path: Home / Tools / Hand tools / Paint, glue, and sealing tools / Gluing and sealing tools / Gun | Home / Our brands / Tec7 / Tec7 tools / Tec7 hand tools / Tec7 paint, glue, and sealing tools / Tec7 gluing and sealing tools / Tec7 gun sr_no_br_cl_ns: 315301260 sr_ns: TEC7315301260
r: 03320344 p: 65.123 pid: 165546 b: TEC7 q: 2 st: 1 lt: 1 ean: 5415207079318 sr: TEC7 670905290 sr_no_br: 670905290 sr_no_br_cl: 670905290 sr_cl: TEC7670905290 sr_dash: sold: 195.369 p_range: none type: standard act: 1 avo: 1 av: Gun type Foam gun n: TEC7 670905290 spray & PUR foam gun cn: GUN cn2: GUN cn_clear: GUN d: Product description NO-STICK PUR GUN WITH EXTRA-LONG SPRAY NECK (60CM) Perfect dosing Non-stick coating Easy to clean Spray & PUR Gun Plus can be used with most PU foams in spray can on the market With the Spray & PUR Gun, the PU foam can be dosed in a controlled way. This allows precise filling of joints and fitting of doors and windows in a fast, easy and safe way A long spray nozzle, which can be additionally extended, allows you to work even in hard-to-reach places Spray & PUR Gun can be cleaned quickly and easily with Spray & PUR Cleaner Instructions Check the functioning of the gun Shake PUR well before use Quickly screw canister onto gun Squeeze the trigger to fill the barrel Use dose screw to regulate flow rate Clean the canister and gun valve immediately with Spray & PUR Cleaner as directed for later use. For short breaks in work, close the dosing screw completely Change in viscosity of foam indicates poor sealing of the needle packing canister. In this case, immediately remove the foam residue with Spray & PUR Cleaner and tighten the control screw on the needle packing bushing more firmly with an 8mm spanner so that the packing seals again. Test the free movement of the needle and lubricate if necessary ds: dsc: kts: spray & PUR foam gun kpn: 670905290 kpn_dash: kpn_clear: 670905290 bkpn: TEC7 670905290 bkpn_clear: TEC7 670905290 c_path: Home / Tools / Hand tools / Paint, glue, and sealing tools / Gluing and sealing tools / Gun | Home / Our brands / Tec7 / Tec7 tools / Tec7 hand tools / Tec7 paint, glue, and sealing tools / Tec7 gluing and sealing tools / Tec7 gun sr_no_br_cl_ns: 670905290 sr_ns: TEC7670905290
r: 03349229 p: 31.239 pid: 167028 b: TEC7 q: 0 st: lt: 18 ean: 5414195013977 sr: TEC7 315300901 sr_no_br: 315300901 sr_no_br_cl: 315300901 sr_cl: TEC7315300901 sr_dash: sold: 187.434 p_range: none type: standard act: 1 avo: 1 av: For max. content 310 ml Gun type Cartridge gun n: TEC7 315300901 multigun cn: GUN cn2: GUN cn_clear: GUN d: Product description TUBE GUN WITH ADJUSTABLE FORCE TRANSMISSION Stepless force adjustment from 12/1 to 25/1 For light sealants and heavy adhesives in standard cartridges Ergonomic, lightweight design Rotatable tube holder Pistol with infinitely adjustable power transmission from 12/1 for clean application of light, flexible sealant to 25/1 for easy pumping of heavy adhesive, 2K adhesive or chemical anchor and everything in between depending on the application Heavy duty materials for long life and treated steel connecting rod with suspension hook Ergonomically balanced for optimal relief of fingers and wrists and a rotating stock to position the nozzle in the correct position Instructions Cut open the cartridge and screw on the nozzle Cut off the nozzle according to the flow rate required Insert the cartridge into the holder (plunger is at the back) Turn the adjustment knob to the desired position The gear ratio can be read off to the side below the adjustment knob 12/1: X-Seal - 18/1: Tec7 - 25/1: X-Tack ds: dsc: kts: multigun kpn: 315300901 kpn_dash: kpn_clear: 315300901 bkpn: TEC7 315300901 bkpn_clear: TEC7 315300901 c_path: Home / Tools / Hand tools / Paint, glue, and sealing tools / Gluing and sealing tools / Gun | Home / Our brands / Tec7 / Tec7 tools / Tec7 hand tools / Tec7 paint, glue, and sealing tools / Tec7 gluing and sealing tools / Tec7 gun sr_no_br_cl_ns: 315300901 sr_ns: TEC7315300901
r: 03346408 p: 35.867 pid: 165545 b: TEC7 q: 0 st: lt: 2 ean: 5414195022344 sr: TEC7 315501290 sr_no_br: 315501290 sr_no_br_cl: 315501290 sr_cl: TEC7315501290 sr_dash: sold: 107.601 p_range: none type: standard act: 1 avo: 1 av: For max. content 600 ml Gun type Cartridge gun n: TEC7 315501290 professional ergonomic tube gun 600 ml cn: GUN cn2: GUN cn_clear: GUN d: Product description PROFESSIONAL ERGONOMIC SEALANT GUN Ergonomic design High power transmission Long service life The Tec Gun is used for spraying most tubular products, regardless of viscosity, and even 2-component products, due to its 18:1 pump ratio The Tec Gun has a pre-release option that allows for a clean finish The Tec Gun features a stainless steel connecting rod with suspension hook The Tec Gun is ergonomic to use thanks to its perfect balance and a rotating stock to position the nozzle in the correct position Instructions Cut open the cartridge and screw on the nozzle Cut the nozzle to the desired flow rate Insert the cartridge into the holder (plunger is at the back) The red lip on the shutter offers two options: down for continuous pressure, appropriate when processing hard products such as X-Tack, and up for a slight retraction to limit the flow of softer products such as X-Seal ds: dsc: kts: professional ergonomic tube gun 600 ml kpn: 315501290 kpn_dash: kpn_clear: 315501290 bkpn: TEC7 315501290 bkpn_clear: TEC7 315501290 c_path: Home / Tools / Hand tools / Paint, glue, and sealing tools / Gluing and sealing tools / Gun | Home / Our brands / Tec7 / Tec7 tools / Tec7 hand tools / Tec7 paint, glue, and sealing tools / Tec7 gluing and sealing tools / Tec7 gun sr_no_br_cl_ns: 315501290 sr_ns: TEC7315501290
r: 03300249 p: 14.008 pid: 165540 b: TEC7 q: 0 st: lt: 8 ean: 5414195020906 sr: TEC7 315020290 sr_no_br: 315020290 sr_no_br_cl: 315020290 sr_cl: TEC7315020290 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Quantity per set 4 n: TEC7 315020290 Perfect Finish joint stripping set cn: SMOOTHING SPATULA SET cn2: SMOOTHING SPATULA SET cn_clear: SMOOTHINGSPATULASET d: Product description JOINT STRIPPING SET Shapes and sizes for all applications Handy format, even for hard-to-reach areas Easy to maintain The Tec7 Perfect Finish set contains four sturdy and flexible stripping tools in a handy storage box, for achieving both rounded and straight 45° joints, with the greatest ease and cleanest finish Cured sealant is easy to remove from the Perfect Finish tools Instructions Why finish with a straight edge at a 45° angle? Primarily for horizontal joints. With a semi-circular finish (with the finger), you get a flat piece at the bottom that runs very thin on the surface. Water can remain on that piece, which is an ideal microclimate for mould and bacteria. With a 45-degree finish, water drains away much easier and the grout dries faster, with less chance of mould growth. So horizontal joints in wet areas always finish straight at 45 degrees The straight finish also has an advantage in joints exposed to sunlight, because the thinner the layer, the more susceptible to damage from UV radiation. This is often the first visible damage to glass joints on windows, for example. With a straight finished joint, there is much less risk of UV damage due to the even thickness build-up Sometimes a rounded joint can be a better aesthetic choice, but best only indoors, on vertical joints and in dry areas. For this, use a Perfect Finish tool with rounded corners. Select the appropriate Perfect Finish finishing tool, moisten it and the fresh sealant with Prepare & Finish and smooth it off in a swift movement. Remove excess sealant Elongated tool right angles 45°: 5-8 m - Elongated tool round angles radius: 5-8 mm - Round angles radius: 6-8-10-14 mm - Straight angles 45°: 6-8-10-14 mm ds: dsc: Scope of delivery Elongated tool right angles 45°: 5 -8 mm Elongated tool round corners radius: 5-8 mm Round corners radius: 6-8-10-14 mm Right angles 45°: 6-8-10-14 mm kts: Perfect Finish joint stripping set kpn: 315020290 kpn_dash: kpn_clear: 315020290 bkpn: TEC7 315020290 bkpn_clear: TEC7 315020290 c_path: Home / Tools / Hand tools / Paint, glue, and sealing tools / Sets / Smoothing spatula set | Home / Our brands / Tec7 / Tec7 tools / Tec7 hand tools / Tec7 paint, glue, and sealing tools / Tec7 sets / Tec7 smoothing spatula set sr_no_br_cl_ns: 315020290 sr_ns: TEC7315020290
