Scope of delivery
- 3 x FoamTack Pro Construct
- 1 x Spray & PUR Cleaner
- 1 x FoamTack Pro Gun
Product description
STARTER KIT ADHESIVE FOAM FOR LOAD-BEARING WALLS
Ready to use, with cleaner and gun
- KOMO approved for load-bearing walls
- Fast processing, fast curing
- No mixing, no water needed
- No waiting time between brick layers
- Stronger than mortar
- Indoor and outdoor use
- 1 can FoamTack Pro Construct = 160 kg mortar = 10 m² aerated concrete blocks
This starter kit is your first choice for the certified bonding of load-bearing and non-load-bearing structures from dimensionally stable materials.
FoamTack Pro Construct is a KOMO-certified adhesive foam for all load-bearing and non-load-bearing constructions made of dimensionally stable materials such as calibrated quick-building brick, sand-lime brick (silicate brick), aerated concrete or concrete blocks (non-load-bearing).
This is a strong alternative to bricklaying or use of powder adhesive. Fast curing and prevention of moisture penetration means the wall can be finished almost immediately (plastering, fitting windows, etc.).
Work can be done quickly, without mixing and without waiting times between brick layers. 1 can of FoamTack Pro Construct is sufficient for 10 m² of aerated concrete blocks (600 x 250 x 150 mm).
FoamTack Pro Construct is a non-intrusive adhesive foam, which ensures optimum contact between the materials to be bonded, even with hollow building blocks. It is applicable at ambient temperatures between -10°C and +35°C.
With the included Spray & PUR Cleaner, you effortlessly clean the gun afterwards for the next use.
