r: 02313725 p: 6.98 pid: 154781 b: TEC7 q: 27 st: 1 lt: 1 ean: 5414195670019 sr: TEC7 670001000 sr_no_br: 670001000 sr_no_br_cl: 670001000 sr_cl: TEC7670001000 sr_dash: sold: 1661.24 p_range: none type: standard act: 1 avo: 1 av: Net volume 750 ml Conseils de prudence (P) P101; P102; P210; P211; P251; P308 + P313; P405; P410 + P412; P501 ADR packing group ADR class 2 UN number UN1950 Principal hazard property GHS02 Flammable Number of components 1 H-statements H222; H229; H315; H317; H319; H332; H334; H335; H351; H373 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS08 Health hazard Physical state Aerosol Packaging Spray can Fire class B3 - flammable Based on Polyurethane Fire resistant No n: TEC7 PUR insulation and mounting foam (750 ml) - 670001000 cn: PU FOAM cn2: PU FOAM cn_clear: PUFOAM d: Product description INSULATION AND MOUNTING FOAM Applicable 360° Minimal expansion pressure Usable at -10°C to +30°C Usable at -10°C to +30°C Rot-resistant Long shelf life, even when opened Ready-to-use PUR foam for assembly, filling, sealing, insulation, prevention of cold and sound bridges, ... Instructions As of 24 August 2023, appropriate training must be completed for industrial or professional use Shake well before use (for reversed use canister, shake during application for smooth flow) Protect adjacent surfaces Apply to clean and stable substrate Slightly moistening the substrate promotes adhesion and shortens the curing time Bring PUR to room temperature before use An opened container can be kept for several weeks if PU foam at the outlet ensures sealing Clean freshly spilt PUR with PUR Cleaner Clean hands with Powerwipes Remove hardened residues with Remove All Store upright and clamp for transport ds: dsc: kts: insulation and mounting foam (750 ml) kpn: PUR kpn_dash: kpn_clear: PUR bkpn: TEC7 PUR bkpn_clear: TEC7 PUR c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Pu foam | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 pu foam | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Pu foam sr_no_br_cl_ns: 670001000 sr_ns: TEC7670001000
r: 02869099 p: 11.62 pid: 155291 b: TEC7 q: 52 st: 1 lt: 1 ean: 5414195455005 sr: TEC7 534515000 sr_no_br: 534515000 sr_no_br_cl: 534515000 sr_cl: TEC7534515000 sr_dash: sold: 1487.36 p_range: none type: standard act: 1 avo: 1 av: Color Black Relative density 1,4 ADR packing group ADR class UN number Net volume 290 ml EUH-statements EUH208 Physical state Solid Packaging Cartridge Use environment Indoor and outdoor use Colour (manufacturer) Black n: TEC7 X-Tack mounting and sealing sealant black in cartridge (290 ml) - 534515000 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description EXTREME MOUNTING WITHOUT SUPPORT Extreme initial tack Vibration and impact resistant Also on wet substrates Perfect for vertical applications Super strong before curing: 600kg/m² Stable in adhesive thicknesses up to 40 mm Permanently elastic Free of phthalates, solvents and isocyanates Safe on mirrors, no marking on natural stone Almost odourless Also on damp, smooth surfaces Mould- and bacteria-resistant Water- and airtight Can be used on most building materials Instructions Application temperature between -10°C and +40°C Apply to clean, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 polymers. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (best with telescopic piston) Due to the wide variety of different plastics and compositions, as well as materials prone to stress corrosion, preliminary tests are recommended Test adhesion to plastics, powdered paints, exotic woods and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer Due to the variety of lacquers and paints on the market, testing is recommended. The use of alkyd resin-based products may delay the drying process. Alkyd resin paints will cure with delay When bonding mirrors in sanitary facilities, only apply vertical bonding strips to avoid stagnating moisture caused by condensation When bonding mirrors in sanitary facilities, only apply vertical strips of adhesive to avoid stagnating moisture caused by condensation. The nozzle is equipped with a V-groove for perfect dispensing with the appropriate glue height, i.e. DO NOT TAPE DOWN When applying, position the nozzle vertically on the surface Easiest to spray with the Tec7 Multigun The strongest bonding with the fastest curing is achieved with adhesive strips (and not with adhesive dots) ds: dsc: kts: mounting and sealing sealant black in cartridge (290 ml) kpn: X-Tack kpn_dash: X kpn_clear: XTack bkpn: TEC7 X-Tack bkpn_clear: TEC7 XTack c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 534515000 sr_ns: TEC7534515000
r: 02956385 p: 4.57 pid: 155299 b: TEC7 q: 0 st: lt: 5 ean: 5414195005392 sr: TEC7 528100000 sr_no_br: 528100000 sr_no_br_cl: 528100000 sr_cl: TEC7528100000 sr_dash: sold: 1151.64 p_range: none type: standard act: 1 avo: 1 av: ADR packing group ADR class UN number EUH-statements EUH208 Physical state Solid Flash point > 150 °C Packaging Cartridge Net volume 310 ml n: TEC7 Tecryl professional painting sealant for filling and joints white paintable (310 ml) - 528100000 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description PROFESSIONAL PAINTING SEALANT Tec7-quality acrylic sealant Almost odourless Easy to finish Paintable after 1 hour Compatible with all paints and lacquers Highly resistant to moisture and condensation Safe on all building materials Tecryl is a professional acrylic sealant for sealing and filling all building materials The formulation guarantees a perfect finish with all types of paint, stain or varnish: with little or no risk of reactions such as paint cracking or discolouration Tecryl cures to a plastic consistency that perfectly follows the expansion and movement of the substrate, but does not dissolve or crack Instructions Apply to clean and dry to slightly moist substrate Spread dry or wet with spatula Can be repainted after 1 hour, depending on temperature and humidity. Remove any protective tape before skin formation to prevent damage to it Use X-Seal for expansion joints Improve adhesion and strengthen weak substrates such as aerated concrete or plaster by coating with diluted Tecryl (2 parts water to 1 part Tecryl) Test the adhesion on plastics, powder paints, exotic woods, bluestone And bituminous materials The perfect joint is as deep as it is wide (from 5 to 10 mm) The drying time depends on: the temperature of the product, the temperature of the environment, the temperature of the substrate, the layer thickness, the humidity of the substrate Do not use as glass sealant or as adhesive sealant. Not suitable for joints with standing water or with immersion Use XealPro as a sealant for wet joints in showers, baths and sanitary rooms ds: dsc: kts: professional painting sealant for filling and joints white paintable (310 ml) kpn: Tecryl kpn_dash: kpn_clear: Tecryl bkpn: TEC7 Tecryl bkpn_clear: TEC7 Tecryl c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 528100000 sr_ns: TEC7528100000
r: 02956399 p: 4 pid: 155303 b: TEC7 q: 19 st: 1 lt: 1 ean: 5414195501023 sr: TEC7 501902000 sr_no_br: 501902000 sr_no_br_cl: 501902000 sr_cl: TEC7501902000 sr_dash: sold: 784 p_range: none type: standard act: 1 avo: 1 av: Net volume 10 ml EUH-statements EUH202 Relative density 1,05 ADR packing group ADR class 9 UN number UN3334 Principal hazard property GHS07 Harmful or irritant Conseils de prudence (P) P101; P102; P264; P271; P280; P304 + P340; P305 + P351 + P338; P405; P501 H-statements H315; H319; H335 Hazard class GHS07 Harmful or irritant Physical state Liquid Flash point 87 °C Packaging Bottle Color Transparent n: TEC7 501902000 Super super superglue 10 ml cn: ADHESIVE cn2: ADHESIVE cn_clear: ADHESIVE d: Product description HARD BROAD-SPECTRUM INSTANT ADHESIVE Cyanoacrylate adhesive Low viscosity and high adhesion For fast bonding and repair Small pot, great strength Super is a fast-curing adhesive based on cyanoacrylate Adhesives are resistant to temperatures from -30°C to +100°C Super bonds have high resistance to shearing forces and are shrink-proof Instructions Single-sided application on clean, dry, grease- and dust-free surface The thinner the adhesive layer, the stronger the bonding Press firmly for a few seconds ds: dsc: kts: Super super superglue 10 ml kpn: 501902000 kpn_dash: kpn_clear: 501902000 bkpn: TEC7 501902000 bkpn_clear: TEC7 501902000 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Adhesive | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 adhesive | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Adhesive sr_no_br_cl_ns: 501902000 sr_ns: TEC7501902000
r: 03203844 p: 9.33 pid: 157061 b: TEC7 q: 0 st: lt: 3 ean: 5414195535868 sr: TEC7 535806000 sr_no_br: 535806000 sr_no_br_cl: 535806000 sr_cl: TEC7535806000 sr_dash: sold: 783.72 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml EUH-statements EUH208 ADR packing group ADR class UN number Physical state Solid Packaging Cartridge Colour (manufacturer) Oak n: TEC7 535806000 all-glue oak RAL 1011 in cartridge (310 ml) cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description SEAL, BOND AND ASSEMBLE EVERYTHING Unique adhesion to almost all materials Very high bonding strength Fast strength build-up Cures up to -10°C Highest class in mould resistance Unique adhesion on difficult materials On dry and wet substrates Permanently elastic over the long term Highly UV-resistant and colourfast for indoor and outdoor use Safe on mirrors and insulation materials, no marking on natural stone Free of isocyanates, solvents and phthalates Water- and airtight Instructions Processing temperature between -10°C and +40°C. At temperatures below 0°C, curing will be greatly delayed Apply on clean, stable, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and a perfect finish In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Test the adhesion on plastics, powder paints, exotic woods and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer PT7 primer ensures optimal adhesion to difficult (LSE) plastics and powder coatings Tec7 cures through a reaction with (air) moisture Use Tec7 in lines, not in thick dots. Dots will cure much more slowly When used between two airtight materials, it is recommended to moisten one of the surfaces very slightly Use vertical glue strips to avoid moisture and dust accumulation Ideal adhesive thickness: 0.5 mm to 3 mm Thinner layers = higher strength, Thicker layers = higher elasticity Paintable after skin formation Do not use with alkyd-based lacquers and paints Use Tec7 Cleaner and/or Tec7 Powerwipes for cleaning tools and/or removing uncured Tec7. Clean hands and skin with Tec7 Powerwipes. Cured Tec7 can only be removed by mechanical means. The last residues can be removed with Remove All if the substrate can withstand it. ds: dsc: kts: all-glue oak RAL 1011 in cartridge (310 ml) kpn: 535806000 kpn_dash: kpn_clear: 535806000 bkpn: TEC7 535806000 bkpn_clear: TEC7 535806000 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 535806000 sr_ns: TEC7535806000
r: 02786121 p: 6.31 pid: 155276 b: TEC7 q: 0 st: lt: 4 ean: 5414195002889 sr: TEC7 528006000 sr_no_br: 528006000 sr_no_br_cl: 528006000 sr_cl: TEC7528006000 sr_dash: sold: 757.2 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml ADR packing group ADR class UN number Colour (manufacturer) Light grey EUH-statements EUH208 Physical state Solid Fire resistant No Packaging Cartridge Repaintable No n: TEC7 XealPro sealant light grey (310 ml) - 528006000 cn: SILICONE cn2: SILICONE cn_clear: SILICONE d: Product description THE NEW GENERATION OF SEALING AND FINISHING SEALANT The safe choice for all types of sealing work Very good chemical resistance and cannot be painted over Sanitary sealant for mould-resistant joint sealing XealPro combines the professional Tec7 quality with excellent application qualities XealPro adheres perfectly to almost all building materials and can be used safely everywhere: mirrors, sanitary facilities, kitchen worktops, ... It is fully CE-certified for all these applications. This new generation of sealant is based on environmentally friendly technology Unlike previous generations of silicone, XealPro contains no known toxic or harmful substances and is a completely MEKO-free silicone Instructions Processing temperature between +5°C and +40°C Apply on clean, stable and dry substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 products. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (telescopic piston is recommended) Test the adhesion on plastics, such as PE, PP and silicones, powder paints, exotic types of wood, bluestone and bituminous materials First reinforce weak and/or porous substrates with Poxy Primer Stain formation on natural stone cannot be excluded, therefore use Tec7 Rock as an alternative. Not paintable and not suitable for aquaria and swimming pools ds: dsc: kts: sealant light grey (310 ml) kpn: XealPro kpn_dash: kpn_clear: XealPro bkpn: TEC7 XealPro bkpn_clear: TEC7 XealPro c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Silicone | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 silicone | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Silicone sr_no_br_cl_ns: 528006000 sr_ns: TEC7528006000
r: 02956401 p: 5.28 pid: 155403 b: TEC7 q: 0 st: lt: 4 ean: 5414195011034 sr: TEC7 501903000 sr_no_br: 501903000 sr_no_br_cl: 501903000 sr_cl: TEC7501903000 sr_dash: sold: 506.88 p_range: none type: standard act: 1 avo: 1 av: Net volume 20 ml Conseils de prudence (P) P101; P102; P264; P271; P280; P304 + P340; P305 + P351 + P338; P405; P501 ADR packing group III ADR class 9 UN number UN3334 Principal hazard property GHS07 Harmful or irritant EUH-statements EUH202 H-statements H315; H319; H335 Hazard class GHS07 Harmful or irritant Physical state Liquid Flash point 87 °C Packaging Bottle Color Transparent n: TEC7 501903000 Super super superglue 20 ml cn: ADHESIVE cn2: ADHESIVE cn_clear: ADHESIVE d: Product description HARD BROAD-SPECTRUM INSTANT ADHESIVE Cyanoacrylate adhesive Low viscosity and high adhesion For fast bonding and repair Small pot, great strength Super is a fast-curing adhesive based on cyanoacrylate Adhesives are resistant to temperatures from -30°C to +100°C Super bonds have high resistance to shearing forces and are shrink-proof Instructions Single-sided application on clean, dry, grease- and dust-free surface The thinner the adhesive layer, the stronger the bonding Press firmly for a few seconds ds: dsc: kts: Super super superglue 20 ml kpn: 501903000 kpn_dash: kpn_clear: 501903000 bkpn: TEC7 501903000 bkpn_clear: TEC7 501903000 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Adhesive | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 adhesive | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Adhesive sr_no_br_cl_ns: 501903000 sr_ns: TEC7501903000
r: 02042527 p: 13.388 pid: 155106 b: TEC7 q: 0 st: lt: 15 ean: 5414195535387 sr: TEC7 535308000 sr_no_br: 535308000 sr_no_br_cl: 535308000 sr_cl: TEC7535308000 sr_dash: sold: 481.968 p_range: none type: standard act: 1 avo: 1 av: Color Grey EUH-statements EUH208 ADR packing group ADR class UN number Net volume 600 ml Physical state Solid Packaging Sausage n: TEC7 535308000 all purpose slimmer grey RAL 7004 in sausage (600 ml) cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description SEAL, BOND AND ASSEMBLE EVERYTHING Unique adhesion to almost all materials Very high bonding strength Fast strength build-up Cures up to -10°C Highest class in mould resistance Unique adhesion on difficult materials On dry and wet substrates Permanently elastic over the long term Highly UV-resistant and colourfast for indoor and outdoor use Safe on mirrors and insulation materials, no marking on natural stone Free of isocyanates, solvents and phthalates Water- and airtight Instructions Processing temperature between -10°C and +40°C. At temperatures below 0°C, curing will be greatly delayed Apply on clean, stable, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and a perfect finish In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Test the adhesion on plastics, powder paints, exotic woods and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer PT7 primer ensures optimal adhesion to difficult (LSE) plastics and powder coatings Tec7 cures through a reaction with (air) moisture Use Tec7 in lines, not in thick dots. Dots will cure much more slowly When used between two airtight materials, it is recommended to moisten one of the surfaces very slightly Use vertical glue strips to avoid moisture and dust accumulation Ideal adhesive thickness: 0.5 mm to 3 mm Thinner layers = higher strength, Thicker layers = higher elasticity Paintable after skin formation Do not use with alkyd-based lacquers and paints Use Tec7 Cleaner and/or Tec7 Powerwipes for cleaning tools and/or removing uncured Tec7. Clean hands and skin with Tec7 Powerwipes. Cured Tec7 can only be removed by mechanical means. The last residues can be removed with Remove All if the substrate can withstand it. ds: dsc: kts: all purpose slimmer grey RAL 7004 in sausage (600 ml) kpn: 535308000 kpn_dash: kpn_clear: 535308000 bkpn: TEC7 535308000 bkpn_clear: TEC7 535308000 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 535308000 sr_ns: TEC7535308000
r: 03068695 p: 7.47 pid: 156171 b: TEC7 q: 0 st: lt: 3 ean: 5414195008089 sr: TEC7 528013000 sr_no_br: 528013000 sr_no_br_cl: 528013000 sr_cl: TEC7528013000 sr_dash: sold: 268.92 p_range: none type: standard act: 1 avo: 1 av: Color Black EUH-statements EUH208 ADR packing group ADR class UN number Net volume 310 ml Physical state Solid Packaging Cartridge n: TEC7 X-Seal paintable sealant black in cartridge (310 ml) - 528013000 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description SEAL EVERYTHING AND EVERYWHERE Extremely flexible and satin-coloured Adheres to most building materials, even wet ones Safe and mould-resistant Perfectly paintable Can be used indoors and outdoors Safe on all materials Bonds all larger surfaces Contains no harmful solvents, isocyanates or phthalates Up to 5 m² adhesive surface per can High glue strength: 15 kg/cm² Instructions Processing temperature between +5°C and +40°C Apply on clean and stable substrates Remove old sealants completely Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 products. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand-electric or air pistol Test adhesion to plastics such as PP, PE, silicones, powder paints, exotic woods and bituminous materials. If necessary, use PT7 as adhesive primer. Reinforce weak and/or porous substrates first with Poxy Primer Can be painted immediately after skin formation. Use paint or varnish according to the movement of the joint. Alkyd resin paints will cure delayed on uncured X-Seal Use Rock for permanent submersion, such as swimming pools ds: dsc: kts: paintable sealant black in cartridge (310 ml) kpn: X-Seal kpn_dash: X kpn_clear: XSeal bkpn: TEC7 X-Seal bkpn_clear: TEC7 XSeal c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 528013000 sr_ns: TEC7528013000
r: 02838437 p: 5.24 pid: 155821 b: TEC7 q: 11 st: 1 lt: 1 ean: 5414195002223 sr: TEC7 535205000 sr_no_br: 535205000 sr_no_br_cl: 535205000 sr_cl: TEC7535205000 sr_dash: sold: 220.08 p_range: none type: standard act: 1 avo: 1 av: Color White EUH-statements EUH208 Relative density 1,62 ADR packing group ADR class UN number Net volume 100 ml Physical state Solid Packaging Tube Colour (manufacturer) White n: TEC7 535205000 all purpose slimmer white RAL 9016 in tube (100 ml) cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description SEAL, BOND AND ASSEMBLE EVERYTHING Unique adhesion to almost all materials Very high bonding strength Fast strength build-up Cures up to -10°C Highest class in mould resistance Unique adhesion on difficult materials On dry and wet substrates Permanently elastic over the long term Highly UV-resistant and colourfast for indoor and outdoor use Safe on mirrors and insulation materials, no marking on natural stone Free of isocyanates, solvents and phthalates Water- and airtight Instructions Processing temperature between -10°C and +40°C. At temperatures below 0°C, curing will be greatly delayed Apply on clean, stable, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and a perfect finish In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Test the adhesion on plastics, powder paints, exotic woods and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer PT7 primer ensures optimal adhesion to difficult (LSE) plastics and powder coatings Tec7 cures through a reaction with (air) moisture Use Tec7 in lines, not in thick dots. Dots will cure much more slowly When used between two airtight materials, it is recommended to moisten one of the surfaces very slightly Use vertical glue strips to avoid moisture and dust accumulation Ideal adhesive thickness: 0.5 mm to 3 mm Thinner layers = higher strength, Thicker layers = higher elasticity Paintable after skin formation Do not use with alkyd-based lacquers and paints Use Tec7 Cleaner and/or Tec7 Powerwipes for cleaning tools and/or removing uncured Tec7. Clean hands and skin with Tec7 Powerwipes. Cured Tec7 can only be removed by mechanical means. The last residues can be removed with Remove All if the substrate can withstand it. ds: dsc: kts: all purpose slimmer white RAL 9016 in tube (100 ml) kpn: 535205000 kpn_dash: kpn_clear: 535205000 bkpn: TEC7 535205000 bkpn_clear: TEC7 535205000 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 535205000 sr_ns: TEC7535205000
r: 03386865 p: 8.86 pid: 178033 b: TEC7 q: 0 st: lt: 8 ean: 5414195023822 sr: TEC7 670008000 sr_no_br: 670008000 sr_no_br_cl: 670008000 sr_cl: TEC7670008000 sr_dash: sold: 212.64 p_range: none type: standard act: 1 avo: 1 av: Net volume 880 ml H-statements H222; H229; H315; H317; H319; H332; H334; H335; H351; H362; H373; H413 ADR packing group ADR class 2 UN number UN1950 Principal hazard property GHS02 Flammable Number of components 1 Conseils de prudence (P) P101; P102; P210; P211; P251; P308 + P313; P405; P410 + P412; P501 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS08 Health hazard Physical state Aerosol Based on Polyurethane Curing system Polymerisatie door (lucht-)vochtigheid Colour (manufacturer) Grey Fire resistant No n: TEC7 FOAMTACK PRO CONSTRUCT spray adhesive foam (880 ml) - 670008000 cn: PU FOAM cn2: PU FOAM cn_clear: PUFOAM d: Product description CERTIFIED ADHESIVE FOAM FOR LOAD-BEARING WALLS KOMO approved for load-bearing walls Fast processing, fast curing No mixing, no water needed No waiting time between brick layers Indoor and outdoor use 1 can of FoamTack Pro Construct = 160 kg mortar = 10 m² aerated concrete blocks Stronger than mortar KOMO-certified adhesive foam for all load-bearing and non-load-bearing constructions made of dimensionally stable materials such as calibrated quicklime brick, sand-lime brick (silicate brick), aerated concrete or concrete blocks (non-load-bearing). This is a strong alternative to bricklaying or use of powder adhesive. Fast curing and prevention of moisture penetration means the wall can be finished almost immediately (plastering, fitting windows, etc.). Work can be done quickly, without mixing and without waiting times between brick layers. 1 can of FoamTack Pro Construct is sufficient for 10 m² of aerated concrete blocks (600 x 250 x 150 mm). FoamTack Pro Construct is a non-intrusive adhesive foam, which ensures optimum contact between the materials to be bonded, even with hollow building blocks. It can be used at ambient temperatures between -10°C and +35°C. ds: dsc: kts: spray adhesive foam (880 ml) kpn: FOAMTACK PRO CONSTRUCT kpn_dash: kpn_clear: FOAMTACKPROCONSTRUCT bkpn: TEC7 FOAMTACK PRO CONSTRUCT bkpn_clear: TEC7 FOAMTACKPROCONSTRUCT c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Pu foam | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 pu foam | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Pu foam sr_no_br_cl_ns: 670008000 sr_ns: TEC7670008000
r: 03203843 p: 9.33 pid: 155413 b: TEC7 q: 0 st: lt: 8 ean: 5414195002544 sr: TEC7 535706000 sr_no_br: 535706000 sr_no_br_cl: 535706000 sr_cl: TEC7535706000 sr_dash: sold: 167.94 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml EUH-statements EUH208 ADR packing group ADR class UN number Physical state Solid Packaging Cartridge Colour (manufacturer) Terracotta n: TEC7 535706000 all-glue terracotta RAL 3012 in cartridge (310 ml) cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description SEAL, BOND AND ASSEMBLE EVERYTHING Unique adhesion to almost all materials Very high bonding strength Fast strength build-up Cures up to -10°C Highest class in mould resistance Unique adhesion on difficult materials On dry and wet substrates Permanently elastic over the long term Highly UV-resistant and colourfast for indoor and outdoor use Safe on mirrors and insulation materials, no marking on natural stone Free of isocyanates, solvents and phthalates Water- and airtight Instructions Processing temperature between -10°C and +40°C. At temperatures below 0°C, curing will be greatly delayed Apply on clean, stable, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and a perfect finish In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Test the adhesion on plastics, powder paints, exotic types of wood and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer PT7 primer ensures optimal adhesion to difficult (LSE) plastics and powder coatings Tec7 cures through a reaction with (air) moisture Use Tec7 in lines, not in thick dots. Dots will cure much more slowly When used between two airtight materials, it is recommended to moisten one of the surfaces very slightly Use vertical glue strips to avoid moisture and dust accumulation Ideal adhesive thickness: 0.5 mm to 3 mm Thinner layers = higher strength, Thicker layers = higher elasticity Paintable after skin formation Do not use with alkyd-based lacquers and paints Use Tec7 Cleaner and/or Tec7 Powerwipes for cleaning tools and/or removing uncured Tec7. Clean hands and skin with Tec7 Powerwipes. Cured Tec7 can only be removed by mechanical means. The last residues can be removed with Remove All if the substrate can withstand it. ds: dsc: kts: all-glue terracotta RAL 3012 in cartridge (310 ml) kpn: 535706000 kpn_dash: kpn_clear: 535706000 bkpn: TEC7 535706000 bkpn_clear: TEC7 535706000 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 535706000 sr_ns: TEC7535706000
r: 02960643 p: 4.57 pid: 156159 b: TEC7 q: 0 st: lt: 3 ean: 5414195503201 sr: TEC7 539503000 sr_no_br: 539503000 sr_no_br_cl: 539503000 sr_cl: TEC7539503000 sr_dash: sold: 164.52 p_range: none type: standard act: 1 avo: 1 av: Net volume 50 ml ADR packing group ADR class UN number EUH-statements EUH208 Physical state Solid n: TEC7 Trans Clear universal sealant transparent (50 ml tube) - 539503000 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description TRANSPARENT UNIVERSAL SEALANT Also adheres to wet substrates Mould- and bacteria-resistant Super strong and permanently elastic after rapid curing Free of solvents and isocyanates Safe on mirrors, no marking on natural stone Almost odourless Also on damp, smooth surfaces Mould- and bacteria-resistant Water- and airtight Can be used on most building materials Instructions Processing temperature between +5°C and +40°C Apply on clean, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 polymers. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (best with telescopic piston) Due to the wide variety of different plastics and compositions, as well as materials prone to stress corrosion, preliminary tests are recommended Test adhesion to plastics, powdered paints, exotic woods and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer Due to the variety of lacquers and paints on the market, testing is recommended. The use of alkyd resin-based products may delay the drying process For mirror bonding in sanitary areas, only apply vertical glue strips to avoid stagnant moisture due to condensation Ideal adhesive thickness for optimal bonding strength: 3 mm ds: dsc: kts: universal sealant transparent (50 ml tube) kpn: Trans Clear kpn_dash: kpn_clear: TransClear bkpn: TEC7 Trans Clear bkpn_clear: TEC7 TransClear c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 sealant | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 539503000 sr_ns: TEC7539503000
r: 03203834 p: 13.057 pid: 155332 b: TEC7 q: 0 st: lt: 7 ean: 5414195535288 sr: TEC7 535208000 sr_no_br: 535208000 sr_no_br_cl: 535208000 sr_cl: TEC7535208000 sr_dash: sold: 156.684 p_range: none type: standard act: 1 avo: 1 av: Color White ADR packing group ADR class UN number Net volume 600 ml EUH-statements EUH208 Physical state Solid Packaging Cartridge Colour (manufacturer) White n: TEC7 535208000 all purpose slimmer white RAL 9016 in sausage (600 ml) cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description SEAL, BOND AND ASSEMBLE EVERYTHING Unique adhesion to almost all materials Very high bonding strength Fast strength build-up Cures up to -10°C Highest class in mould resistance Unique adhesion on difficult materials On dry and wet substrates Permanently elastic over the long term Highly UV-resistant and colourfast for indoor and outdoor use Safe on mirrors and insulation materials, no marking on natural stone Free of isocyanates, solvents and phthalates Water- and airtight Instructions Processing temperature between -10°C and +40°C. At temperatures below 0°C, curing will be greatly delayed Apply on clean, stable, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and a perfect finish In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Test the adhesion on plastics, powder paints, exotic woods and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer PT7 primer ensures optimal adhesion to difficult (LSE) plastics and powder coatings Tec7 cures through a reaction with (air) moisture Use Tec7 in lines, not in thick dots. Dots will cure much more slowly When used between two airtight materials, it is recommended to moisten one of the surfaces very slightly Use vertical glue strips to avoid moisture and dust accumulation Ideal adhesive thickness: 0.5 mm to 3 mm Thinner layers = higher strength, Thicker layers = higher elasticity Paintable after skin formation Do not use with alkyd-based lacquers and paints Use Tec7 Cleaner and/or Tec7 Powerwipes for cleaning tools and/or removing uncured Tec7. Clean hands and skin with Tec7 Powerwipes. Cured Tec7 can only be removed by mechanical means. The last residues can be removed with Remove All if the substrate can withstand it. ds: dsc: kts: all purpose slimmer white RAL 9016 in sausage (600 ml) kpn: 535208000 kpn_dash: kpn_clear: 535208000 bkpn: TEC7 535208000 bkpn_clear: TEC7 535208000 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 535208000 sr_ns: TEC7535208000
r: 03203848 p: 6.31 pid: 157062 b: TEC7 q: 0 st: lt: 5 ean: 5414195004265 sr: TEC7 528011000 sr_no_br: 528011000 sr_no_br_cl: 528011000 sr_cl: TEC7528011000 sr_dash: sold: 151.44 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml EUH-statements EUH208 Relative density 1,02 - 1,03 ADR packing group ADR class UN number Colour (manufacturer) Transparent Physical state Solid Fire resistant No Packaging Cartridge Repaintable No n: TEC7 XealPro sealant beige RAL 1015 (310 ml cartridge) - 528011000 cn: SILICONE cn2: SILICONE cn_clear: SILICONE d: Product description THE NEW GENERATION OF SEALING AND FINISHING SEALANT The safe choice for all types of sealing work Very good chemical resistance and cannot be painted over Sanitary sealant for mould-resistant joint sealing XealPro combines the professional Tec7 quality with excellent application qualities XealPro adheres perfectly to almost all building materials and can be used safely anywhere: mirrors, sanitary facilities, kitchen worktops, etc. It is fully CE-certified for all these applications. This new generation of sealant is based on environmentally friendly technology Unlike previous generations of silicone, XealPro contains no known toxic or harmful substances and is a completely MEKO-free silicone Instructions Processing temperature between +5°C and +40°C Apply on clean, stable and dry substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 products. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (telescopic piston is recommended) Test the adhesion on plastics, such as PE, PP and silicones, powder paints, exotic types of wood, bluestone and bituminous materials First reinforce weak and/or porous substrates with Poxy Primer Stain formation on natural stone cannot be excluded, therefore use Tec7 Rock as an alternative. Not paintable and not suitable for aquaria and swimming pools ds: dsc: kts: sealant beige RAL 1015 (310 ml cartridge) kpn: XealPro kpn_dash: kpn_clear: XealPro bkpn: TEC7 XealPro bkpn_clear: TEC7 XealPro c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Silicone | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 silicone | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Silicone sr_no_br_cl_ns: 528011000 sr_ns: TEC7528011000
r: 03203995 p: 45.785 pid: 155416 b: TEC7 q: 0 st: lt: 5 ean: 5414195011683 sr: TEC7 602205000 sr_no_br: 602205000 sr_no_br_cl: 602205000 sr_cl: TEC7602205000 sr_dash: sold: 91.57 p_range: none type: standard act: 1 avo: 1 av: Net volume 4,4 l EUH-statements EUH066 ADR packing group ADR class Principal hazard property GHS02 Flammable UN number Conseils de prudence (P) P101; P102; P210; P271; P280; P303 + P361 + P353; P304 + P340; P405; P501 H-statements H226; H336; H412 Hazard class GHS02 Flammable; GHS07 Harmful or irritant Physical state Liquid Flash point < 61 °C n: TEC7 WP7-301 repair paste for roofing waterproofing (4.4l pot) - 602205000 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description REPAIR PASTE FOR ROOFING ROOFS Cold repair of leaks, cracks and blisters With rubber for long-lasting flexibility With bitumen for perfect sealing With fibres for lasting strength Ready for use and easy to spread Applicable on wet and dry surfaces, also vertically, and immediately waterproof and rainproof Adheres to most building materials and is compatible with all bituminous materials Can be finished with slate chippings for extra UV protection and walkability Instructions Apply to clean and stable substrate, free of ice or snow If necessary, clean and dry (without heating), remove loose parts and hardened bitumen, blisters in roof lining cut open in cross shape Reinforce large repairs with pieces of roofing or fibreglass tape Apply with sealant gun, brush or spatula Finish and clean tools with Tec7 Cleaner Do not use in ponds or watercourses, or on roofs that drain into ponds Layer thickness 2 mm, for grouting slate chippings, 1 mm thickness is sufficient 1 litre = 1 mm on 1m² ds: dsc: kts: repair paste for roofing waterproofing (4.4l pot) kpn: WP7-301 kpn_dash: WP7 kpn_clear: WP7301 bkpn: TEC7 WP7-301 bkpn_clear: TEC7 WP7301 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 sealant | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 602205000 sr_ns: TEC7602205000
r: 03203993 p: 6.98 pid: 154958 b: TEC7 q: 13 st: 1 lt: 1 ean: 5414195011577 sr: TEC7 602150000 sr_no_br: 602150000 sr_no_br_cl: 602150000 sr_cl: TEC7602150000 sr_dash: sold: 55.84 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml EUH-statements EUH066 Relative density 1,12 ADR packing group ADR class UN number Principal hazard property GHS02 Flammable Conseils de prudence (P) P101; P102; P210; P271; P280; P303 + P361 + P353; P304 + P340; P405; P501 H-statements H226; H336; H412 Hazard class GHS02 Flammable; GHS07 Harmful or irritant Physical state Liquid Flash point < 61 °C Packaging Cartridge Color Black n: TEC7 WP7-301 repair paste for roofing waterproofing (310 ml cartridge) - 602150000 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description REPAIR PASTE FOR ROOFING ROOFS Cold repair of leaks, cracks and blisters With rubber for long-lasting flexibility With bitumen for perfect sealing With fibres for lasting strength Ready for use and easy to spread Applicable on wet and dry surfaces, also vertically, and immediately waterproof and rainproof Adheres to most building materials and is compatible with all bituminous materials Can be finished with slate chippings for extra UV protection and walkability Instructions Apply to clean and stable substrate, free of ice or snow If necessary, clean and dry (without heating), remove loose parts and hardened bitumen, blisters in roof lining cut open in cross shape Reinforce large repairs with pieces of roofing or fibreglass tape Apply with sealant gun, brush or spatula Finish and clean tools with Tec7 Cleaner Do not use in ponds or watercourses, or on roofs that drain into ponds Layer thickness 2 mm, for grouting slate chippings, 1 mm thickness is sufficient 1 litre = 1 mm on 1m² ds: dsc: kts: repair paste for roofing waterproofing (310 ml cartridge) kpn: WP7-301 kpn_dash: WP7 kpn_clear: WP7301 bkpn: TEC7 WP7-301 bkpn_clear: TEC7 WP7301 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 602150000 sr_ns: TEC7602150000
r: 03300245 p: 11.239 pid: 178023 b: TEC7 q: 20 st: 1 lt: 1 ean: 5414195020821 sr: TEC7 534529000 sr_no_br: 534529000 sr_no_br_cl: 534529000 sr_cl: TEC7534529000 sr_dash: sold: 44.956 p_range: none type: standard act: 1 avo: 1 av: Color White EUH-statements EUH208 Relative density 1,4 ADR packing group ADR class UN number Net volume 290 ml Physical state Solid Packaging Sausage Colour (manufacturer) White n: TEC7 X-TACK mounting and sealing sealant white in sausage (400 ml) - 534529000 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description EXTREME MOUNTING WITHOUT SUPPORT Extreme initial tack Vibration and impact resistant Also on wet substrates Perfect for vertical applications Super strong before curing: 600kg/m² Stable in adhesive thicknesses up to 40 mm Permanently elastic Free of phthalates, solvents and isocyanates Safe on mirrors, no marking on natural stone Almost odourless Also on damp, smooth surfaces Mould- and bacteria-resistant Water- and airtight Can be used on most building materials Instructions Application temperature between -10°C and +40°C Apply to clean, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 polymers. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (best with telescopic piston) Due to the wide variety of different plastics and compositions, as well as materials prone to stress corrosion, preliminary tests are recommended Test adhesion to plastics, powdered paints, exotic woods and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer Due to the variety of lacquers and paints on the market, testing is recommended. The use of alkyd resin-based products may delay the drying process. Alkyd resin paints will cure with delay When bonding mirrors in sanitary facilities, only apply vertical bonding strips to avoid stagnating moisture caused by condensation When bonding mirrors in sanitary facilities, only apply vertical strips of adhesive to avoid stagnating moisture caused by condensation. The nozzle is equipped with a V-groove for perfect dispensing with the appropriate glue height, i.e. DO NOT TAPE DOWN When applying, position the nozzle vertically on the surface Easiest to spray with the Tec7 Multigun The strongest bonding with the fastest curing is achieved with adhesive strips (and not with adhesive dots) ds: dsc: kts: mounting and sealing sealant white in sausage (400 ml) kpn: X-TACK kpn_dash: X kpn_clear: XTACK bkpn: TEC7 X-TACK bkpn_clear: TEC7 XTACK c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer sr_no_br_cl_ns: 534529000 sr_ns: TEC7534529000
r: 03203846 p: 4.23 pid: 155340 b: TEC7 q: 0 st: lt: 6 ean: 5414195203200 sr: TEC7 535203924 sr_no_br: 535203924 sr_no_br_cl: 535203924 sr_cl: TEC7535203924 sr_dash: sold: 25.38 p_range: none type: standard act: 1 avo: 1 av: Color White ADR packing group ADR class UN number Net volume 50 ml EUH-statements EUH208 Physical state Solid Packaging Tube Colour (manufacturer) White n: TEC7 535203924 all purpose slimmer white RAL 9016 in tube 50 ml (6 pcs.) cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description SEAL, BOND AND ASSEMBLE EVERYTHING Unique adhesion to almost all materials Very high bonding strength Fast strength build-up Cures up to -10°C Highest class in mould resistance Unique adhesion on difficult materials On dry and wet substrates Permanently elastic over the long term Highly UV-resistant and colourfast for indoor and outdoor use Safe on mirrors and insulation materials, no marking on natural stone Free of isocyanates, solvents and phthalates Water- and airtight Instructions Processing temperature between -10°C and +40°C. At temperatures below 0°C, curing will be greatly delayed Apply on clean, stable, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and a perfect finish In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Test the adhesion on plastics, powder paints, exotic types of wood and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer PT7 primer ensures optimal adhesion to difficult (LSE) plastics and powder coatings Tec7 cures through a reaction with (air) moisture Use Tec7 in lines, not in thick dots. Dots will cure much more slowly When used between two airtight materials, it is recommended to moisten one of the surfaces very slightly Use vertical glue strips to avoid moisture and dust accumulation Ideal adhesive thickness: 0.5 mm to 3 mm Thinner layers = higher strength, Thicker layers = higher elasticity Paintable after skin formation Do not use with alkyd-based lacquers and paints Use Tec7 Cleaner and/or Tec7 Powerwipes for cleaning tools and/or removing uncured Tec7. Clean hands and skin with Tec7 Powerwipes. Cured Tec7 can only be removed by mechanical means. The last residues can be removed with Remove All if the substrate can withstand it. ds: dsc: kts: all purpose slimmer white RAL 9016 in tube 50 ml (6 pcs.) kpn: 535203924 kpn_dash: kpn_clear: 535203924 bkpn: TEC7 535203924 bkpn_clear: TEC7 535203924 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 535203924 sr_ns: TEC7535203924
r: 03372172 p: 33.842 pid: 178022 b: TEC7 q: 0 st: lt: 12 ean: 5414195023594 sr: TEC7 591536000 sr_no_br: 591536000 sr_no_br_cl: 591536000 sr_cl: TEC7591536000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 250 ml ADR packing group ADR class UN number Color Beige Principal hazard property GHS07 Harmful or irritant Conseils de prudence (P) P101; P102; P264; P280; P305 + P351 + P338; P337 + P313 H-statements H319 Hazard class GHS07 Harmful or irritant Physical state Solid Packaging Cartridge n: TEC7 2K-FIX 2-component PU adhesive, filler and repair paste beige in cartridge 250 ml - 591536000 cn: ADHESIVE cn2: ADHESIVE cn_clear: ADHESIVE d: Product description FAST, IMPACT-RESISTANT 2K PU ADHESIVE Adhesive, filler and repair paste Hand strength after 30 minutes Low MDI: safe to use Very high adhesive strength Cures to an impact-resistant plastic Safe in use, odourless Shrink-free, also in thicker layers High chemical resistance An opened tube can be used several times Instructions Processing temperature between +5°C and +40°C Apply on clean, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 polymers. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (best with telescopic piston) Due to the wide variety of different plastics and compositions, as well as materials prone to stress corrosion, preliminary tests are recommended Test adhesion to plastics, powdered paints, exotic woods and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer Due to the variety of lacquers and paints on the market, testing is recommended. The use of alkyd resin-based products may delay the drying process For mirror bonding in sanitary areas, only apply vertical glue strips to avoid stagnant moisture due to condensation Ideal adhesive thickness for optimal bonding strength: 3 mm ds: dsc: kts: 2-component PU adhesive, filler and repair paste beige in cartridge 250 ml kpn: 2K-FIX kpn_dash: 2K kpn_clear: 2KFIX bkpn: TEC7 2K-FIX bkpn_clear: TEC7 2KFIX c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Adhesive | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 adhesive | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Adhesive sr_no_br_cl_ns: 591536000 sr_ns: TEC7591536000
