Pour the hardener (the entire bottle) into the epoxy mortar (bucket)
Mix thoroughly until a homogeneous mass is obtained with a slowly rotating spindle for approx. 2 min
NEVER add water, cement or other products
Apply to clean, dry and stable substrate
For applications thicker than 4 cm, apply in several layers or formwork
Finishing after curing: sanding, grinding, drilling, gluing, anchoring, nailing, etc.
Clean tools with acetone
At +15°C: working time after mixing: 30 min, mechanically loadable after 24 hours and chemically resistant after 7 days. High temperatures accelerate curing, low temperatures slow down curing
Key features according to our expert
Flash point: 100 °C
Physical state: Solid; Liquid
Hazard class: GHS07 Harmful or irritant; GHS05 Corrosive; GHS08 Health hazard; GHS09 Environmental hazard