Is a primer required before applying Floor Fix?

No, you can apply this 2-component epoxy mortar directly onto a clean, dry, and stable substrate without a primer.

How strong is this epoxy mortar after curing?

After shrink-free curing, it is three times stronger than concrete and withstands heavy traffic such as forklifts.

What layer thickness can be applied with Tec7 Floor Fix?

You can apply it in unlimited layer thicknesses and taper it down to zero level without shrinkage or loss of strength.

When can the repaired floor be loaded again?

At 15 °C, it is walkable after 12 hours, mechanically loadable after 24 hours, and chemically resistant after 7 days.

What should you use to clean tools after application?

Clean your tools immediately after use with acetone.

TEC7 602510000 FLOOR FIX Heavy duty epoxy mortar (1kg bucket) - 602510000

Name: TEC7 602510000 FLOOR FIX Heavy duty epoxy mortar (1kg bucket) - 602510000
Brand: TEC7
SKU: 11990034
Price: 17.6 EUR
Availability: InStock

Supplier number: TEC7 602510000 | EAN 5414195210710

From 1 piece €17.60

From 12 pieces €16.72 - €10.56 saving

From 24 pieces €16.28 - €31.68 saving

From 36 pieces €15.84 - €63.36 saving

17.60 tax incl.

€14.55 excl. VAT (incl. all environmental contributions)

On stock - immediately available | we have 6 products in stock.

Delivery by DHL

↓ Documents (2) ✆ Talk to a specialist

Durable floor repairs with TEC7 Floor Fix

Practical benefits

Three times stronger than concrete: You repair damaged industrial floors and ramps with a heavy-duty compound that easily withstands forklift and pallet traffic.
Direct adhesion without primer: You apply the mortar directly onto concrete, stone, wood, or metal surfaces without applying separate bonding agents.
Shrink-free application at any depth: You fill deep holes and feather edges down to zero thickness without losing strength or risking crack formation.

In a nutshell

The right choise for

With TEC7 Floor Fix, you repair damaged concrete floors, steps, and loading docks quickly and permanently. This 2-component epoxy mortar bonds directly to concrete, stone, wood, and metal without requiring a separate primer. Once cured without shrinkage, it becomes up to three times stronger than concrete, easily handling heavy vehicle traffic and forklifts. You can apply the mortar in unlimited layer thicknesses and taper edges down to zero level without losing strength or risking cracks. It allows you to fill deep pits, wide cracks, and broken edges efficiently for a tough, heavy-duty surface.

Product information FAQ

€17.60

In stock - tax incl.

Key features according to our expert

Packaging: Bucket
Principal hazard property: GHS07 Harmful or irritant
Relative density: 1,1
ADR packing group: Not applicable
ADR class: Not applicable
Flash point: > 150 °C
UN number: Not applicable
P-statements: P101; P102; P264; P280; P302 + P352; P305 + P351 + P338; P333 + P313; P337 + P313; P501
H-statements: H315; H317; H319; H412
Hazard class: GHS07 Harmful or irritant
Physical state: Solid

Product description

HEAVY DUTY EPOXY MORTAR

Industrial trowelable 2-K epoxy mortar with full glass beads
Stronger than concrete
Extreme chemical and mechanical resistance

Instructions

Pour the hardener (the full bottle) into the epoxy mortar (bucket)
Mix thoroughly until a homogeneous mass is obtained with a slowly rotating spindle for approx. 2 min
NEVER add water, cement or other products
Apply to clean, dry and stable substrate
Finish after curing: sanding, grinding, drilling, gluing, anchoring, nailing, .
Clean tools with acetone
At +15°C: working time after mixing: 30 min, walkable after 12 h, mechanically loadable after 24 h and chemical resistant after 7 days. High temperatures accelerate curing, low temperatures slow down curing

Precautionary statements

P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P264: Wash ... (see safety data sheet) thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352: IF ON SKIN: Wash with plenty of water/…
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
P337 + P313: If eye irritation persists: Get medical advice/attention.
P501: Dispose of contents/container to ... (see safety data sheet).

Hazard statements

H315: Causes skin irritation.
H317: May cause an allergic skin reaction.
H319: Causes serious eye irritation.
H412: Harmful to aquatic life with long lasting effects.

Documents

⤓ Technical data sheet PDF ⤓ Safety sheet PDF

All Features

Packaging: Bucket
Principal hazard property: GHS07 Harmful or irritant
Relative density: 1,1
Adr packing group: Not applicable
Adr class: Not applicable
Flash point: > 150 °C
Un number: Not applicable
P-statements: P101; P102; P264; P280; P302 + P352; P305 + P351 + P338; P333 + P313; P337 + P313; P501
H-statements: H315; H317; H319; H412
Hazard class: GHS07 Harmful or irritant
Physical state: Solid

Brand TEC7
11990034
EAN 5414195210710
Supplier number TEC7 602510000

Frequently asked questions about this product

Answered by specialists

Is a primer required before applying Floor Fix?: No, you can apply this 2-component epoxy mortar directly onto a clean, dry, and stable substrate without a primer.
How strong is this epoxy mortar after curing?: After shrink-free curing, it is three times stronger than concrete and withstands heavy traffic such as forklifts.
What layer thickness can be applied with Tec7 Floor Fix?: You can apply it in unlimited layer thicknesses and taper it down to zero level without shrinkage or loss of strength.
When can the repaired floor be loaded again?: At 15 °C, it is walkable after 12 hours, mechanically loadable after 24 hours, and chemically resistant after 7 days.
What should you use to clean tools after application?: Clean your tools immediately after use with acetone.