Spit FIX Z XTREM through bolt for heavy concrete anchoring
- Approved for cracked concrete: With ETA Option 1 certification, you achieve dependable fastening in both cracked and uncracked concrete under seismic conditions.
- High load bearing capacity: The thick expansion clip and optimized anchor body geometry give you high resistance against heavy tensile and shear forces.
- Fast and direct installation: Pre-assembled with a washer and nut, this anchor lets you secure structural elements quickly with minimal setting effort.
With the Spit fix z xtrem M12X105/10 through bolt anchor, you achieve dependable fastening in both cracked and uncracked concrete as well as seismic zones. Thanks to the eta Option 1 certification and optimized expansion clip, you gain maximum load capacity for demanding structural jobs such as securing base plates, safety barriers, or façade brackets. The pre-assembled washer and nut enable fast, direct push-through installation without wasting time on loose parts. Designed for a 12 mm drill hole and a fixture thickness of up to 10 mm, this anchor gives you the strength and speed needed to work with total confidence.
Product description
- Piercing anchor for cracked and non-cracked concrete and seismic applications
- ETA-approved quality anchor for safety applications
- Widely applicable XTREM anchor thanks to CE approval for use in cracked and non-cracked concrete
- High allowable loads thanks to special geometry and segment thickness
- Large range that can be used in all seismic C1 and C2 areas
- Geometry ensures easy placement and fast installation due to minimum number of turns
- Maximum flexibility thanks to the fully continuous screw act
Applications
- Steel structures
- Safety fences
- Curtain wall
- Purlin
- Wooden panel
- HVAC
- Timber structures