Heavy load anchoring with Spit FIX 3
- Reliable holding in concrete: The ETA Option 7 approval ensures you achieve high load-bearing capacity when anchoring into non-cracked concrete.
- Rapid and secure expansion: The optimized clip design expands immediately in the 12 mm drilled hole for solid mechanical interlock.
- Fast pre-assembled installation: With the pre-mounted nut and washer, you save valuable time during through-fixing tasks up to 50 mm fixture thickness.
With the Spit fix 3 segment anchor M12X125/50, you create strong, dependable anchoring in non-cracked concrete and solid masonry. Featuring a total length of 125 mm, an M12 thread, and a usable fixture thickness of 50 mm, this zinc-plated steel anchor is built to secure heavy steel structures, base plates, and industrial racking. The eta Option 7 approval ensures high load-bearing capacity against tensile and shear loads. Its expansion clip expands firmly within the 12 mm drilled hole during tightening. Supplied with a pre-mounted nut and washer, it allows fast through-fixing in dry indoor environments.
Product description
- Pierce fitting for heavy loads in non-cracked concrete
- ETA approved quality anchor for standard applications
- ETA option 7 for use in non-cracked concrete
- Achieves the highest loads for an ETA option 7 approved anchor
- Fast expansion thanks to special segment design
- Extra large washer for a wide range of applications
- Long thread for flexible fixing thickness
Applications
- Steel structures
- Stairs
- Pull and pressure braces
- Purlin shoe
- Stadium seating
- HVAC
- Wooden structures
- Brackets
- Metal brackets
