r: 03242288 p: 0.92 pid: 181123 b: SPAX q: 0 st: lt: 5 ean: 4003530269752 sr: SPAX 1191010602005 sr_no_br: 1191010602005 sr_no_br_cl: 1191010602005 sr_cl: SPAX1191010602005 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 6 mm Material Steel Surface treatment Wirox For material Wood Length 200 mm n: SPAX 1191010602005 universal screw wirox flat head 6 x 200 mm full thread countersunk head T-STAR plus T30 steel - 92231001579 cn: FACADE SCREW cn2: FACADE SCREW cn_clear: FACADESCREW d: Product description Multifunctional indoor applications Fast and reliable processing with low effort (more screws on one battery charge) Universal use Effectively reduces the risk of wood splitting, even at small edge distances The special force application - the drive - is a so-called inner hexagon round. Compared to less precisely fitting drives, such as Phillips or Phillips heads, the gripping surface with our T-STAR plus is a multiple and the T-STAR bits always sit optimally in the screw head. The resulting optimum, precise power transfer from the cordless screwdriver to the screw by T-STAR plus therefore ensures easy and enormously smooth work, and that much more efficiently than with any other drive. That means for you: The troublesome ejection of the bit from the screw head is a thing of the past, you can complete large screw jobs in the shortest possible time! Mounting window and door frames made of plastic and aluminium profiles requires a head shape that can withstand high pull-through forces on one side and does not project too much on the other. Both conditions are perfectly fulfilled by our flat countersunk head. This is used in our SPAX-RA full-thread screw, which is used for dowel-less fastening of window and door frames. As so often, the drive takes place via T-STAR plus force engagement. That means for you: No annoying screw heads on the inside of window and door frames. Unlike partial threads, in most of our full thread screws, full thread extends along the entire or practically entire length of the screw, from tip to head. The more threads a screw has, the greater the tensile and compressive forces that can be derived across them. We exploit this particularly in structural timber construction, where our full-thread screws are used for heavy-duty timber joints. That means for you: You can fully trust wood joints with full-thread screws in terms of load-bearing capacity, no application of unsightly galvanised fittings required. The designation 4CUT for the tip of our screws describes the fact that it is not round but four-sided. These four sides displace the wood fibres during screwing in and thus make room for the core diameter of the screw. The otherwise inevitable spreading pressure, which the core exerts in the wood, is thus effectively reduced and splitting of the wood close to the edge is reduced. The torque required from the cordless screwdriver is also reduced because the core of the screwdriver does not have to "worm" its way through the wood. That means for you: Even at the otherwise splitting-sensitive edges of your workpiece, pre-drilling is practically no longer necessary! The 4CUT saves you a complete work cycle. Effective corrosion protection of the screws is absolutely essential for structures that are not exposed to the weather. With WIROX, SPAX has developed a coating that is far superior to conventional galvanisation in terms of corrosion protection. With WIROX coated, our screws are significantly more resistant to mechanical stress than their yellowish, chromated counterparts. WIROX contains no chromium(VI). The screws retain their load capacity even after years of outdoor applications not exposed to direct weather influences and are not environmentally harmful. Our WIROX screws are the first choice for all open construction without direct exposure to weather, such as carports and pergolas. However, for heavy weather exposure, such as terraces, we still recommend our screws in the stainless steel variant. That means for you: When you use our corrosion-resistant screws outdoors, you can rely on the joints of your structure - WIROX keeps our screws statically absolutely stable and reliably protected for many years in outdoor applications not exposed to direct weather. So you can save yourself the annual visual inspection! ds: dsc: kts: universal screw wirox flat head 6 x 200 mm full thread countersunk head T-STAR plus T30 steel kpn: 1191010602005 kpn_dash: kpn_clear: 1191010602005 bkpn: SPAX 1191010602005 bkpn_clear: SPAX 1191010602005 c_path: Home / Fasteners and machine components / Fasteners / Screws / Facade screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax facade screw sr_no_br_cl_ns: 1191010602005 sr_ns: SPAX1191010602005
r: 03242286 p: 0.6 pid: 181149 b: SPAX q: 0 st: lt: 5 ean: 4003530269745 sr: SPAX 1191010601605 sr_no_br: 1191010601605 sr_no_br_cl: 1191010601605 sr_cl: SPAX1191010601605 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 6 mm Material Steel Surface treatment Wirox For material Wood Length 160 mm n: SPAX 1191010601605 universal screw wirox flat head 6 x 160 mm full thread countersunk head T-STAR plus T30 steel - 92231001578 cn: FACADE SCREW cn2: FACADE SCREW cn_clear: FACADESCREW d: Product description Multifunctional indoor applications Fast and reliable processing with low effort (more screws on one battery charge) Universal use Effectively reduces the risk of wood splitting, even at small edge distances The special force application - the drive - is a so-called inner hexagon round. Compared to less precisely fitting drives, such as Phillips or Phillips heads, the gripping surface with our T-STAR plus is a multiple and the T-STAR bits always sit optimally in the screw head. The resulting optimal, precise power transfer from the cordless screwdriver to the screw by T-STAR plus therefore ensures easy and enormously smooth work, and that much more efficiently than with any other drive. That means for you: The troublesome ejection of the bit from the screw head is a thing of the past, you can complete large screw jobs in the shortest possible time! Mounting window and door frames made of plastic and aluminium profiles requires a head shape that can withstand high pull-through forces on one side and does not protrude too much on the other. Both conditions are perfectly fulfilled by our flat countersunk head. This is used in our SPAX-RA full-thread screw, which is used for dowel-less fastening of window and door frames. As so often, the drive takes place via T-STAR plus force engagement. That means for you: No annoying screw heads on the inside of window and door frames. Unlike partial threads, in most of our full-thread screws, full thread extends along the entire or practically entire length of the screw, from the tip to the head. The more threads a screw has, the greater the tensile and compressive forces that can be derived across them. We exploit this particularly in structural timber construction, where our full-thread screws are used for heavy-duty timber joints. That means for you: You can fully trust wood joints with full-thread screws in terms of load-bearing capacity, no application of unsightly galvanised fittings required. The designation 4CUT for the tip of our screws describes the fact that it is not round but four-sided. These four sides displace the wood fibres during screwing in and thus make room for the core diameter of the screw. The otherwise inevitable spreading pressure, which the core exerts in the wood, is thus effectively reduced and splitting of the wood close to the edge is reduced. The torque required from the cordless screwdriver is also reduced because the core of the screwdriver does not have to "worm" its way through the wood. That means for you: Even at the otherwise splitting-sensitive edges of your workpiece, pre-drilling is practically no longer necessary! The 4CUT saves you a complete work cycle. Effective corrosion protection of the screws is absolutely essential for structures that are not exposed to the weather. With WIROX, SPAX has developed a coating that is far superior to conventional galvanisation in terms of corrosion protection. With WIROX coated, our screws are significantly more resistant to mechanical stress than their yellowish, chromated counterparts. WIROX contains no chromium(VI). The screws retain their load capacity even after years of outdoor applications not exposed to direct weather influences and are not environmentally harmful. Our WIROX screws are the first choice for all open construction without direct exposure to weather, such as carports and pergolas. However, for heavy weather exposure, such as terraces, we still recommend our screws in the stainless steel variant. That means for you: When you use our corrosion-resistant screws outdoors, you can rely on the joints of your structure - WIROX keeps our screws statically absolutely stable and reliably protected for many years in outdoor applications not exposed to direct weather. So you can save yourself the annual visual inspection! ds: dsc: kts: universal screw wirox flat head 6 x 160 mm full thread countersunk head T-STAR plus T30 steel kpn: 1191010601605 kpn_dash: kpn_clear: 1191010601605 bkpn: SPAX 1191010601605 bkpn_clear: SPAX 1191010601605 c_path: Home / Fasteners and machine components / Fasteners / Screws / Facade screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax facade screw sr_no_br_cl_ns: 1191010601605 sr_ns: SPAX1191010601605
r: 03242284 p: 0.46 pid: 181146 b: SPAX q: 0 st: lt: 5 ean: 4003530269738 sr: SPAX 1191010601405 sr_no_br: 1191010601405 sr_no_br_cl: 1191010601405 sr_cl: SPAX1191010601405 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 6 mm Material Steel Surface treatment Wirox For material Wood Length 140 mm n: SPAX 1191010601405 universal screw wirox flat head 6 x 140 mm full thread countersunk head T-STAR plus T30 steel - 92231001577 cn: FACADE SCREW cn2: FACADE SCREW cn_clear: FACADESCREW d: Product description Multifunctional indoor applications Fast and reliable processing with low effort (more screws on one battery charge) Universal use Effectively reduces the risk of wood splitting, even at small edge distances The special force application - the drive - is a so-called inner hexagon round. Compared to less precisely fitting drives, such as Phillips or Phillips heads, the gripping surface with our T-STAR plus is a multiple and the T-STAR bits always sit optimally in the screw head. The resulting optimal, precise power transfer from the cordless screwdriver to the screw by T-STAR plus therefore ensures easy and enormously smooth work, and that much more efficiently than with any other drive. That means for you: The troublesome ejection of the bit from the screw head is a thing of the past, you can complete large screw jobs in the shortest possible time! Mounting window and door frames made of plastic and aluminium profiles requires a head shape that can withstand high pull-through forces on one side and does not protrude too much on the other. Both conditions are perfectly fulfilled by our flat countersunk head. This is used in our SPAX-RA full-thread screw, which is used for dowel-less fastening of window and door frames. As so often, the drive takes place via T-STAR plus force engagement. That means for you: No annoying screw heads on the inside of window and door frames. Unlike partial threads, in most of our full-thread screws, full thread extends along the entire or practically entire length of the screw, from the tip to the head. The more threads a screw has, the greater the tensile and compressive forces that can be derived across them. We exploit this particularly in structural timber construction, where our full-thread screws are used for heavy-duty timber joints. That means for you: You can fully trust wood joints with full-thread screws in terms of load-bearing capacity, no application of unsightly galvanised fittings required. The designation 4CUT for the tip of our screws describes the fact that it is not round but four-sided. These four sides displace the wood fibres during screwing in and thus make room for the core diameter of the screw. The otherwise inevitable spreading pressure, which the core exerts in the wood, is thus effectively reduced and splitting of the wood close to the edge is reduced. The torque required from the cordless screwdriver is also reduced because the core of the screwdriver does not have to "worm" its way through the wood. That means for you: Even at the otherwise splitting-sensitive edges of your workpiece, pre-drilling is practically no longer necessary! The 4CUT saves you a complete work cycle. Effective corrosion protection of the screws is absolutely essential for structures that are not exposed to the weather. With WIROX, SPAX has developed a coating that is far superior to conventional galvanisation in terms of corrosion protection. With WIROX coated, our screws are significantly more resistant to mechanical stress than their yellowish, chromated counterparts. WIROX contains no chromium(VI). The screws retain their load capacity even after years of outdoor applications not exposed to direct weather influences and are not environmentally harmful. Our WIROX screws are the first choice for all open construction without direct exposure to weather, such as carports and pergolas. However, for heavy exposure to weather, such as terraces, we still recommend our screws in the stainless steel variant. That means for you: When you use our corrosion-resistant screws outdoors, you can rely on the joints of your structure - WIROX keeps our screws statically absolutely stable and reliably protected for many years in outdoor applications not exposed to direct weather. So you can save yourself the annual visual inspection! ds: dsc: kts: universal screw wirox flat head 6 x 140 mm full thread countersunk head T-STAR plus T30 steel kpn: 1191010601405 kpn_dash: kpn_clear: 1191010601405 bkpn: SPAX 1191010601405 bkpn_clear: SPAX 1191010601405 c_path: Home / Fasteners and machine components / Fasteners / Screws / Facade screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax facade screw sr_no_br_cl_ns: 1191010601405 sr_ns: SPAX1191010601405
r: 03242283 p: 0.35 pid: 181094 b: SPAX q: 0 st: lt: 5 ean: 4003530269721 sr: SPAX 1191010601205 sr_no_br: 1191010601205 sr_no_br_cl: 1191010601205 sr_cl: SPAX1191010601205 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 6 mm Material Steel Surface treatment Wirox For material Wood Length 120 mm n: SPAX 1191010601205 universal screw wirox flat head 6 x 120 mm full thread countersunk head T-STAR plus T30 steel - 92231001508 cn: FACADE SCREW cn2: FACADE SCREW cn_clear: FACADESCREW d: Product description Multifunctional indoor applications Fast and reliable processing with low effort (more screws on one battery charge) Universal use Effectively reduces the risk of wood splitting, even at small edge distances The special force application - the drive - is a so-called inner hexagon round. Compared to less precisely fitting drives, such as Phillips or Phillips heads, the gripping surface with our T-STAR plus is a multiple and the T-STAR bits always sit optimally in the screw head. The resulting optimum, precise power transfer from the cordless screwdriver to the screw by T-STAR plus therefore ensures easy and enormously smooth work, and that much more efficiently than with any other drive. That means for you: The troublesome ejection of the bit from the screw head is a thing of the past, you can complete large screw jobs in the shortest possible time! Mounting window and door frames made of plastic and aluminium profiles requires a head shape that can withstand high pull-through forces on one side and does not project too much on the other. Both conditions are perfectly fulfilled by our flat countersunk head. This is used in our SPAX-RA full-thread screw, which is used for dowel-less fastening of window and door frames. As so often, the drive takes place via T-STAR plus force engagement. That means for you: No annoying screw heads on the inside of window and door frames. Unlike partial threads, in most of our full thread screws, full thread extends along the entire or practically entire length of the screw, from the tip to the head. The more threads a screw has, the greater the tensile and compressive forces that can be derived across them. We exploit this particularly in structural timber construction, where our full-thread screws are used for heavy-duty timber joints. That means for you: You can fully trust wood joints with full-thread screws in terms of load-bearing capacity, no application of unsightly galvanised fittings required. The designation 4CUT for the tip of our screws describes the fact that it is not round but four-sided. These four sides displace the wood fibres during screwing in and thus make room for the core diameter of the screw. The otherwise inevitable spreading pressure, which the core exerts in the wood, is thus effectively reduced and splitting of the wood close to the edge is reduced. The torque required from the cordless screwdriver is also reduced because the core of the screwdriver does not have to "worm" its way through the wood. That means for you: Even at the otherwise splitting-sensitive edges of your workpiece, pre-drilling is practically no longer necessary! The 4CUT saves you a complete work cycle. Effective corrosion protection of the screws is absolutely essential for structures that are not exposed to the weather. With WIROX, SPAX has developed a coating that is far superior to conventional galvanisation in terms of corrosion protection. With WIROX coated, our screws are significantly more resistant to mechanical stress than their yellowish, chromated counterparts. WIROX contains no chromium(VI). The screws retain their load capacity even after years of outdoor applications not exposed to direct weather influences and are not environmentally harmful. Our WIROX screws are the first choice for all open construction without direct exposure to weather, such as carports and pergolas. However, for heavy exposure to weather, such as terraces, we still recommend our screws in the stainless steel variant. That means for you: When you use our corrosion-resistant screws outdoors, you can rely on the joints of your structure - WIROX keeps our screws statically absolutely stable and reliably protected for many years in outdoor applications not exposed to direct weather. So you can save yourself the annual visual inspection! ds: dsc: kts: universal screw wirox flat head 6 x 120 mm full thread countersunk head T-STAR plus T30 steel kpn: 1191010601205 kpn_dash: kpn_clear: 1191010601205 bkpn: SPAX 1191010601205 bkpn_clear: SPAX 1191010601205 c_path: Home / Fasteners and machine components / Fasteners / Screws / Facade screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax facade screw sr_no_br_cl_ns: 1191010601205 sr_ns: SPAX1191010601205
r: 03198032 p: 0.32 pid: 180997 b: SPAX q: 350 st: 1 lt: 1 ean: 4003530266874 sr: SPAX 4577000450556 sr_no_br: 4577000450556 sr_no_br_cl: 4577000450556 sr_cl: SPAX4577000450556 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 4,5 mm Material Stainless steel A2 For material Wood Length 55 mm n: SPAX 4577000450556 mortise screw, 4.5 x 55 m - 92231001631 cn: FACADE SCREW cn2: FACADE SCREW cn_clear: FACADESCREW d: Product description No splitting of the wood, even at small edge distances High resistance to weathering and corrosion Quick and reliable processing with little effort Application: exterior and roof applications - exposed to weather influences Nothing can damage a structure as much as water penetration. To prevent this, not only the building materials used must be water-resistant, but also the connecting materials are part of a well-considered sealing system. The SPAX gusset screw is used where plastic roof panels, metal sheets or connection profiles must be fastened tightly and permanently. For this purpose, our washer screw is made of stainless steel and comes with an EPDM sealing washer already inserted. The latter prevents water from penetrating into the roofing and construction via the drilled hole. Unlike other products, our sealing ring consists of a single piece with a diameter of 20 mm. This benefits not only the seal itself, but also the pressure distribution on the often sensitive plastic or metal surfaces. Screw and sealing ring are made of A2 stainless steel and can easily withstand exposure to weather conditions. In addition to the larger sealing ring, it is above all our own SPAX features that make our SPAX mortise screw so special: these include the T-STAR plus power gripping and the 4CUT tip, which offer unique processing advantages. What this means for you: you can reliably fasten roof boards and cladding with a single working step and permanently seal the fastening points. ds: dsc: kts: mortise screw, 4.5 x 55 m kpn: 4577000450556 kpn_dash: kpn_clear: 4577000450556 bkpn: SPAX 4577000450556 bkpn_clear: SPAX 4577000450556 c_path: Home / Fasteners and machine components / Fasteners / Screws / Facade screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax facade screw sr_no_br_cl_ns: 4577000450556 sr_ns: SPAX4577000450556
r: 02684446 p: 0.3 pid: 180773 b: SPAX q: 0 st: lt: 6 ean: 4003530184048 sr: SPAX 25470004507022 sr_no_br: 25470004507022 sr_no_br_cl: 25470004507022 sr_cl: SPAX25470004507022 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 4,5 mm Material Stainless steel For material Wood Length 70 mm n: SPAX 25470004507022 chipboard screw, A2 bilge head small 8 mm thick milled ribs T-STAR plus, 31 mm - 92231001444 cn: FACADE SCREW cn2: FACADE SCREW cn_clear: FACADESCREW d: Product description: Raised countersunk head, T-STAR plus With MULTI Head and 4CUT, slide-coated Stainless steel A2 II Application: Wooden facades Advantages: Reduces splitting and bulging of the wood Clean countersinking thanks to milling ribs Minimises rust formation on the facade Special properties: The fixing thread permits a safe and permanent connection of the wood parts. Decorative Raised countersunk head T-STAR plus: secure bit grip, no cam-out effect, optimal force transmission Features: 4CUT: allows screwing in without pre-drilling (wood-dependent), reduces splitting as square end displaces the fibres Ground serrations: up to the point - quick and secure fastening ds: dsc: kts: chipboard screw, A2 bilge head small 8 mm thick milled ribs T-STAR plus, 31 mm kpn: 25470004507022 kpn_dash: kpn_clear: 25470004507022 bkpn: SPAX 25470004507022 bkpn_clear: SPAX 25470004507022 c_path: Home / Fasteners and machine components / Fasteners / Screws / Facade screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax facade screw sr_no_br_cl_ns: 25470004507022 sr_ns: SPAX25470004507022
r: 03198030 p: 0.29 pid: 181017 b: SPAX q: 400 st: 1 lt: 1 ean: 4003530266850 sr: SPAX 4577000450456 sr_no_br: 4577000450456 sr_no_br_cl: 4577000450456 sr_cl: SPAX4577000450456 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 4,5 mm Material Stainless steel A2 For material Wood Length 45 mm n: SPAX 4577000450456 mortise screw, 4.5 x 45 m - 92231001630 cn: FACADE SCREW cn2: FACADE SCREW cn_clear: FACADESCREW d: Product description No splitting of the wood, even at small edge distances High resistance to weathering and corrosion Quick and reliable processing with little effort Application: exterior and roof applications - exposed to weather influences Nothing can damage a structure as much as water penetration. To prevent this, not only do the building materials used have to be water-resistant, but the connecting materials are also part of a well-thought-out sealing system. The SPAX gusset screw is used where plastic roof panels, metal sheets or connection profiles must be fastened tightly and permanently. For this purpose, our washer screw is made of stainless steel and comes with an EPDM sealing washer already inserted. The latter prevents water from penetrating into the roofing and construction via the drilled hole. Unlike other products, our sealing ring consists of a single piece with a diameter of 20 mm. This benefits not only the seal itself, but also pressure distribution on the often sensitive plastic or metal surfaces. Screw and sealing ring are made of A2 stainless steel and can easily withstand exposure to weather conditions. In addition to the larger sealing ring, it is above all our own SPAX features that make our SPAX mortise screw so special: these include the T-STAR plus power gripping and the 4CUT tip, which offer unique processing advantages. What this means for you: you can reliably fasten roof boards and cladding with a single working step and permanently seal the fastening points. ds: dsc: kts: mortise screw, 4.5 x 45 m kpn: 4577000450456 kpn_dash: kpn_clear: 4577000450456 bkpn: SPAX 4577000450456 bkpn_clear: SPAX 4577000450456 c_path: Home / Fasteners and machine components / Fasteners / Screws / Facade screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax facade screw sr_no_br_cl_ns: 4577000450456 sr_ns: SPAX4577000450456
r: 03198028 p: 0.28 pid: 181073 b: SPAX q: 60 st: 1 lt: 1 ean: 4003530266836 sr: SPAX 4577000450357 sr_no_br: 4577000450357 sr_no_br_cl: 4577000450357 sr_cl: SPAX4577000450357 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 4,5 mm Material Stainless steel A2 For material Wood Length 35 mm n: SPAX 4577000450357 mortise screw, 4.5 x 35 m - 92231001629 cn: FACADE SCREW cn2: FACADE SCREW cn_clear: FACADESCREW d: Product description No splitting of the wood, even at small edge distances High resistance to weathering and corrosion Quick and reliable processing with little effort Application: exterior and roof applications - exposed to weather influences Nothing can damage a structure as much as water penetration. To prevent this, not only do the building materials used have to be water-resistant, but the connecting materials are also part of a well-thought-out sealing system. The SPAX gusset screw is used where plastic roof panels, metal sheets or connection profiles must be fastened tightly and permanently. For this purpose, our washer screw is made of stainless steel and comes with an EPDM sealing washer already inserted. The latter prevents water from penetrating into the roofing and construction via the drilled hole. Unlike other products, our sealing ring consists of a single piece with a diameter of 20 mm. This benefits not only the seal itself, but also pressure distribution on the often sensitive plastic or metal surfaces. Screw and sealing ring are made of A2 stainless steel and can easily withstand exposure to weather conditions. In addition to the larger sealing ring, it is above all our own SPAX features that make our SPAX mortise screw so special: these include the T-STAR plus power gripping and the 4CUT tip, which offer unique processing advantages. What this means for you: you can reliably fasten roof boards and cladding with a single working step and permanently seal the fastening points. ds: dsc: kts: mortise screw, 4.5 x 35 m kpn: 4577000450357 kpn_dash: kpn_clear: 4577000450357 bkpn: SPAX 4577000450357 bkpn_clear: SPAX 4577000450357 c_path: Home / Fasteners and machine components / Fasteners / Screws / Facade screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax facade screw sr_no_br_cl_ns: 4577000450357 sr_ns: SPAX4577000450357
r: 03242279 p: 0.26 pid: 180274 b: SPAX q: 0 st: lt: 5 ean: 4003530269714 sr: SPAX 1191010601005 sr_no_br: 1191010601005 sr_no_br_cl: 1191010601005 sr_cl: SPAX1191010601005 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 6 mm Material Steel Surface treatment Wirox For material Wood Length 100 mm n: SPAX 1191010601005 universal screw wirox flat head 6 x 100 mm full thread countersunk head T-STAR plus T30 steel - 92231001576 cn: FACADE SCREW cn2: FACADE SCREW cn_clear: FACADESCREW d: Product description Multifunctional indoor applications Fast and reliable processing with low effort (more screws on one battery charge) Universal use Effectively reduces the risk of wood splitting, even at small edge distances The special force application - the drive - is a so-called inner hexagon round. Compared to less precisely fitting drives, such as Phillips or Phillips heads, the gripping surface with our T-STAR plus is a multiple and the T-STAR bits always sit optimally in the screw head. The resulting optimum, precise power transfer from the cordless screwdriver to the screw by T-STAR plus therefore ensures easy and enormously smooth work, and that much more efficiently than with any other drive. That means for you: The troublesome ejection of the bit from the screw head is a thing of the past, you can complete large screw jobs in the shortest possible time! Mounting window and door frames made of plastic and aluminium profiles requires a head shape that can withstand high pull-through forces on one side and does not project too much on the other. Both conditions are perfectly fulfilled by our flat countersunk head. This is used in our SPAX-RA full-thread screw, which is used for dowel-less fastening of window and door frames. As so often, the drive takes place via T-STAR plus force engagement. That means for you: No annoying screw heads on the inside of window and door frames. Unlike partial threads, in most of our full thread screws, full thread extends along the entire or practically entire length of the screw, from tip to head. The more threads a screw has, the greater the tensile and compressive forces that can be derived across them. We exploit this particularly in structural timber construction, where our full-thread screws are used for heavy-duty timber joints. That means for you: You can fully trust wood joints with full-thread screws in terms of load-bearing capacity, no application of unsightly galvanised fittings required. The designation 4CUT for the tip of our screws describes the fact that it is not round but four-sided. These four sides displace the wood fibres during screwing in and thus make room for the core diameter of the screw. The otherwise inevitable spreading pressure, which the core exerts in the wood, is thus effectively reduced and splitting of the wood close to the edge is reduced. The required torque of the cordless screwdriver is also reduced because the core of the screwdriver does not have to "wriggle" through the wood. That means for you: Even at the otherwise splitting-sensitive edges of your workpiece, pre-drilling is practically no longer necessary! The 4CUT saves you a complete work cycle. Effective corrosion protection of the screws is absolutely essential for structures that are not exposed to the weather. With WIROX, SPAX has developed a coating that is far superior to conventional galvanisation in terms of corrosion protection. With WIROX coated, our screws are significantly more resistant to mechanical stress than their yellowish, chromated counterparts. WIROX contains no chromium(VI). The screws retain their load capacity even after years of outdoor applications not exposed to direct weather influences and are not environmentally harmful. Our WIROX screws are the first choice for all open construction without direct exposure to weather, such as carports and pergolas. However, for heavy weather exposure, such as terraces, we still recommend our screws in the stainless steel variant. That means for you: When you use our corrosion-resistant screws outdoors, you can rely on the joints of your structure - WIROX keeps our screws statically absolutely stable and reliably protected for many years in outdoor applications not exposed to direct weather. So you can save yourself the annual visual inspection! ds: dsc: kts: universal screw wirox flat head 6 x 100 mm full thread countersunk head T-STAR plus T30 steel kpn: 1191010601005 kpn_dash: kpn_clear: 1191010601005 bkpn: SPAX 1191010601005 bkpn_clear: SPAX 1191010601005 c_path: Home / Fasteners and machine components / Fasteners / Screws / Facade screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax facade screw sr_no_br_cl_ns: 1191010601005 sr_ns: SPAX1191010601005
r: 02684468 p: 0.25 pid: 180696 b: SPAX q: 0 st: lt: 6 ean: 4003530183959 sr: SPAX 25479004506022 sr_no_br: 25479004506022 sr_no_br_cl: 25479004506022 sr_cl: SPAX25479004506022 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 4,5 mm For material Wood Length 60 mm Material Stainless steel n: SPAX 25479004506022 chipboard screw, A2 antique lens head small 8 mm thick milled ribs T-STAR plus, 26 mm - 92231001446 cn: FACADE SCREW cn2: FACADE SCREW cn_clear: FACADESCREW d: Product description: Raised countersunk head, T-STAR plus With MULTI Head and 4CUT, slide-coated Stainless steel A2 antique II Application: Wooden facades Advantages: Reduces splitting and bulging of the wood Clean countersinking thanks to milling ribs Minimises rust formation on the facade Special properties: The fixing thread permits a safe and permanent connection of the wood parts. Decorative Raised countersunk head T-STAR plus: secure bit grip, no cam-out effect, optimal force transmission Features: 4CUT: allows screwing in without pre-drilling (wood-dependent), reduces splitting as square end displaces the fibres Ground serrations: up to the point - quick and secure fastening ds: dsc: kts: chipboard screw, A2 antique lens head small 8 mm thick milled ribs T-STAR plus, 26 mm kpn: 25479004506022 kpn_dash: kpn_clear: 25479004506022 bkpn: SPAX 25479004506022 bkpn_clear: SPAX 25479004506022 c_path: Home / Fasteners and machine components / Fasteners / Screws / Facade screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax facade screw sr_no_br_cl_ns: 25479004506022 sr_ns: SPAX25479004506022
r: 03198026 p: 0.25 pid: 181012 b: SPAX q: 75 st: 1 lt: 1 ean: 4003530266812 sr: SPAX 4577000450257 sr_no_br: 4577000450257 sr_no_br_cl: 4577000450257 sr_cl: SPAX4577000450257 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 4,5 mm Material Stainless steel A2 For material Wood Length 25 mm n: SPAX 4577000450257 mortise screw, 4.5 x 25 m - 92231001628 cn: FACADE SCREW cn2: FACADE SCREW cn_clear: FACADESCREW d: Product description No splitting of the wood, even at small edge distances High resistance to weathering and corrosion Quick and reliable processing with little effort Application: exterior and roof applications - exposed to weather influences Nothing can damage a structure as much as water penetration. To prevent this, not only do the building materials used have to be water-resistant, but the connecting materials are also part of a well-thought-out sealing system. The SPAX gusset screw is used where plastic roof panels, metal sheets or connection profiles must be fastened tightly and permanently. For this purpose, our washer screw is made of stainless steel and comes with an EPDM sealing washer already inserted. The latter prevents water from penetrating into the roofing and construction via the drilled hole. Unlike other products, our sealing ring consists of a single piece with a diameter of 20 mm. This benefits not only the seal itself, but also the pressure distribution on the often sensitive plastic or metal surfaces. Screw and sealing ring are made of A2 stainless steel and can easily withstand exposure to weather conditions. In addition to the larger sealing ring, it is above all our own SPAX features that make our SPAX mortise screw so special: these include the T-STAR plus power gripping and the 4CUT tip, which offer unique processing advantages. What this means for you: you can reliably fasten roof boards and cladding with a single working step and permanently seal the fastening points. ds: dsc: kts: mortise screw, 4.5 x 25 m kpn: 4577000450257 kpn_dash: kpn_clear: 4577000450257 bkpn: SPAX 4577000450257 bkpn_clear: SPAX 4577000450257 c_path: Home / Fasteners and machine components / Fasteners / Screws / Facade screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax facade screw sr_no_br_cl_ns: 4577000450257 sr_ns: SPAX4577000450257
r: 02684455 p: 0.2 pid: 180779 b: SPAX q: 0 st: lt: 6 ean: 4003530183935 sr: SPAX 25479004505022 sr_no_br: 25479004505022 sr_no_br_cl: 25479004505022 sr_cl: SPAX25479004505022 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 4,5 mm For material Wood Length 50 mm Material Stainless steel n: SPAX 25479004505022 chipboard screw, A2 antique lens head small 8 mm thick milled ribs T-STAR plus, 21 mm - 92231001445 cn: FACADE SCREW cn2: FACADE SCREW cn_clear: FACADESCREW d: Product description: Raised countersunk head, T-STAR plus With MULTI Head and 4CUT, slide-coated Stainless steel A2 antique II Application: Wooden facades Advantages: Reduces splitting and bulging of the wood Clean countersinking thanks to milling ribs Minimises rust formation on the facade Special properties: The fixing thread permits a safe and permanent connection of the wood parts. Decorative Raised countersunk head T-STAR plus: secure bit grip, no cam-out effect, optimal force transmission Features: 4CUT: allows screwing in without pre-drilling (wood-dependent), reduces splitting as square end displaces the fibres Ground serrations: up to the point - quick and secure fastening ds: dsc: kts: chipboard screw, A2 antique lens head small 8 mm thick milled ribs T-STAR plus, 21 mm kpn: 25479004505022 kpn_dash: kpn_clear: 25479004505022 bkpn: SPAX 25479004505022 bkpn_clear: SPAX 25479004505022 c_path: Home / Fasteners and machine components / Fasteners / Screws / Facade screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax facade screw sr_no_br_cl_ns: 25479004505022 sr_ns: SPAX25479004505022
r: 02621191 p: 0.17 pid: 180640 b: SPAX q: 0 st: lt: 6 ean: 4003530183881 sr: SPAX 25470004505022 sr_no_br: 25470004505022 sr_no_br_cl: 25470004505022 sr_cl: SPAX25470004505022 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Diameter 4,5 mm Material Stainless steel For material Wood Length 50 mm n: SPAX 25470004505022 chipboard screw, A2 bilge head small 8 mm thick milled ribs T-STAR plus, 21 mm - 92231001442 cn: FACADE SCREW cn2: FACADE SCREW cn_clear: FACADESCREW d: Product description: Raised countersunk head, T-STAR plus With MULTI Head and 4CUT, slide-coated Stainless steel A2 II Application: Wooden facades Advantages: Reduces splitting and bulging of the wood Clean countersinking thanks to milling ribs Minimises rust formation on the facade Special properties: The fixing thread permits a safe and permanent connection of the wood parts. Decorative Raised countersunk head T-STAR plus: secure bit grip, no cam-out effect, optimal force transmission Features: 4CUT: allows screwing in without pre-drilling (wood-dependent), reduces splitting as square end displaces the fibres Ground serrations: up to the point - quick and secure fastening ds: dsc: kts: chipboard screw, A2 bilge head small 8 mm thick milled ribs T-STAR plus, 21 mm kpn: 25470004505022 kpn_dash: kpn_clear: 25470004505022 bkpn: SPAX 25470004505022 bkpn_clear: SPAX 25470004505022 c_path: Home / Fasteners and machine components / Fasteners / Screws / Facade screw | Home / Our brands / Spax / Spax fasteners and machine components / Spax fasteners / Spax screws / Spax facade screw sr_no_br_cl_ns: 25470004505022 sr_ns: SPAX25470004505022
