Precise leveling of timber substructures
- Stepless and accurate adjustment: You effortlessly align wooden battens to the exact distance using the retaining ribs located under the flat head.
- Superior control with Spax: The T-STAR plus T30 drive ensures a secure bit fit to eliminate slipping and maximize driving torque.
- Reduced splitting in wood: The 4CUT tip displaces wood fibers without pre-drilling, while the durable Wirox coating provides high resistance against corrosion.
With the Spax adjustment screw 6 x 130 mm, you can level and align wooden battens and substructures on uneven walls or ceilings quickly and with absolute precision. Time-consuming shimming with wedges or packers is no longer needed. Simply drive the screw in and reverse it slightly: the retaining ribs beneath the flat head grip the timber to adjust the spacing continuously. The 4CUT tip reduces wood splitting and removes the need for pre-drilling in softwoods. You also benefit from maximum power transmission and zero bit slippage thanks to the t-star plus T30 drive, while the durable Wirox coating provides dependable corrosion protection for interior and sheltered outdoor applications.
Product description
- Optimum countersinking of the screw head thanks to special flat head
- Fast and reliable processing with little effort (more screws on one battery charge)
- Stepless levelling of wooden substructures on solid wood substrates, wood-based materials and boards
- Effectively reduces the risk of wood splitting, even at small edge distances
- Without pre-drilling (depending on the type of wood)
With a wooden substructure consisting of battens and bearing battens on wooden substrates, it comes down to millimetre-precise alignment of the battens. Whereas you previously had to make do with washers or wedges, you can now save yourself the trouble with the SPAX adjusting screw.
By screwing the screw all the way in, the screw head is completely countersunk. When you then turn the screw slightly to the left, the holding ribs located under the screw head clamp into the wood and the batten is lifted off the substrate over the desired distance.
Our set screw also offers our own SPAX features, such as the T-STAR plus force gripping system, the 4CUT and the wave profile. The flat head allows optimal countersinking and offers high pull-through resistance. Our WIROX coating ensures that SPAX adjustment screws can be used both indoors and outdoors, as long as they are not exposed to the weather.
For you, this means: easy and millimetre-precise levelling of the support slats without wedges - this installation method is extremely time-saving.