Precise alignment for timber battening
- Stepless leveling without wedges: Integrated retaining ribs allow you to adjust timber battens to the exact required spacing with ease.
- Smooth Spax screw insertion: The 4CUT tip displaces wood fibres smoothly, preventing splitting even when driving close to outer edges.
- Secure drive and grip: The T-STAR plus T30 drive offers a firm bit hold and efficient torque transfer for fast fastening.
With the Spax adjusting screw 6 x 110 mm, you can level and align timber battens and substructures with pinpoint accuracy. The retaining ribs beneath the flat head allow for stepless distance adjustment, making wooden wedges and packing shims completely unnecessary. Thanks to the 4CUT point, wood splitting is effectively prevented, even when fastening close to the edges. The t-star plus T30 drive ensures a secure bit fit and efficient torque transfer without slip. Finished with the protective Wirox coating, this screw provides high corrosion resistance for interior finishing and renovations. You achieve flat, perfectly aligned timber frames with complete control.
Product description
- Optimum countersinking of the screw head thanks to special flat head
- Fast and reliable processing with little effort (more screws on one battery charge)
- Infinite levelling of wooden substructures on solid wood substrates, wood-based materials and boards
- Effectively reduces the risk of wood splitting, even at small edge distances
- Without pre-drilling (depending on the type of wood)
With a wooden substructure consisting of battens and bearing battens on wooden substrates, it comes down to millimetre-precise alignment of the battens. If you previously had to make do with washers or wedges, you can now save yourself the trouble with the SPAX adjusting screw.
By screwing the screw all the way in, the screw head is completely countersunk. When you then turn the screw slightly to the left, the holding ribs located under the screw head clamp into the wood and the batten is lifted off the substrate over the desired distance.
Our set screw also offers our own SPAX features, such as the T-STAR plus power gripping system, the 4CUT and the wave profile. The flat head allows optimal countersinking and offers high pull-through resistance. Our WIROX coating ensures that SPAX adjustment screws can be used both indoors and outdoors, as long as they are not exposed to the weather.
For you, this means: easy and millimetre-precise levelling of the support slats without wedges - this installation method is extremely time-saving.