Accurate alignment with Spax screws
- Precise and stepless adjustment: You adjust timber battens to the exact distance needed by simply turning the screw in reverse.
- Reduced splitting without predrilling: The 4CUT point minimizes wood splitting and allows you to drive screws straight in effortlessly.
- Maximum torque and control: The T-STAR plus T30 drive ensures a tight bit fit and prevents cam-out during demanding fastenings.
With the Spax adjusting screw 6 x 100 mm, you can align wooden battens and substructures with millimetre precision. Eliminate packing blocks and wedges entirely: drive the screw in and simply reverse it to adjust spacing steplessly. The retaining ribs under the flat head securely hold the timber at your chosen clearance. Thanks to the 4CUT point, you can fasten into softwood without pre-drilling while minimizing wood splitting. The t-star plus T30 drive delivers a firm bit fit and efficient torque transmission without cam-out, while the wirox steel coating provides reliable protection for your interior framing and renovation tasks.
Product description
- Optimum countersinking of the screw head thanks to special flat head
- Fast and reliable processing with little effort (more screws on one battery charge)
- Stepless levelling of wooden substructures on solid wood substrates, wood-based materials and boards
- Effectively reduces the risk of wood splitting, even at small edge distances
- Without pre-drilling (depending on the type of wood)
With a wooden substructure consisting of battens and joists on wooden substrates, it is a matter of millimetre-precise alignment of the battens. If you previously had to make do with washers or wedges, you can now save yourself the trouble with the SPAX adjusting screw.
By screwing the screw all the way in, the screw head is completely countersunk. When you then turn the screw slightly to the left, the holding ribs located under the screw head clamp into the wood and the batten is lifted off the substrate over the desired distance.
Our set screw also offers our own SPAX features, such as the T-STAR plus force gripping system, the 4CUT and the wave profile. The flat head allows optimal countersinking and offers high pull-through resistance. Our WIROX coating ensures that SPAX adjustment screws can be used both indoors and outdoors, as long as they are not exposed to the weather.
For you, this means: easy and millimetre-precise levelling of the support slats without wedges - this installation method is extremely time-saving.