r: 08085328 p: 6.793 pid: 105719 b: SOUDAL q: 0 st: lt: 8 ean: 5411183177116 sr: SOUDAL 156469 sr_no_br: 156469 sr_no_br_cl: 156469 sr_cl: SOUDAL156469 sr_dash: sold: 163.032 p_range: none type: standard act: 1 avo: 1 av: Net volume 600 ml EUH-statements EUH208; EUH210 ADR packing group ADR class UN number Physical state Liquid Packaging Sausage n: SOUDAL Soudatight SP coating black (600 ml) - 156469 cn: COATING cn2: COATING cn_clear: COATING d: Product description: Soudatight SP is the sprayable version of Soudatight LQ, only the glass fibres are logically omitted. This product can be very easily and quickly sprayed to form a liquid, air- and vapour-tight membrane on larger surfaces and on the connections between these surfaces (floor-wall, wall-ceiling, etc.). Forms a seamless elastic membrane after drying, which is an ideal base for painting or plastering. Best used in combination with Soudatight LQ for optimum results. Soudatight SP is applied using airless spray equipment. Properties: Air- and vapour-tight Very good adhesion to many porous materials Good adhesion on slightly damp substrates Permanently elastic after curing and very durable Can be painted over and plastered after drying Complies with GEV-EMICODE EC-1 PLUS: very low emission Applications: For air- and vapour-tight finishing of window connections, wall-floor connections, wall-ceiling connections and surfaces (no roof applications). Instructions for use: Make sure that Soudatight SP is at room temperature before use. Shake or stir well before use. Soudatight SP is applied to the substrate using airless or air-assisted spraying equipment directly from the packaging. The choice of spraying equipment, pressure, gun and spray tip depends on the application. Contact Soudal for further tailor-made information. Apply the air sealing paste undiluted and evenly in several layers (at least 2) to the substrate to a layer thickness of minimum 1 mm and maximum 3 mm. For best coverage, apply the product at a different angle the second time. It is recommended to apply the 2nd coat only after skin formation occurs with the first coat. The application thickness should be measured (wet) using a thickness gauge. For window applications ensure that the airtightness paste forms a seamless membrane of at least 3 mm on the window frame, over the flexible foam up to ± 5 cm on the day side of the building shell. The use of masking tape (on the window frame) is recommended. However, this should be removed shortly after application of Soudatight SP, before curing. For wall connections, ensure that the airtightness paste forms a seamless membrane of ± 15 cm on both surfaces. Before curing, Soudatight SP can be removed from materials and tools with water. ds: dsc: kts: coating black (600 ml) kpn: Soudatight SP kpn_dash: kpn_clear: SoudatightSP bkpn: SOUDAL Soudatight SP bkpn_clear: SOUDAL SoudatightSP c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal surface treatment and repair / Soudal other surface treatment / Soudal coating | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Coating sr_no_br_cl_ns: 156469 sr_ns: SOUDAL156469
r: 02334046 p: 8.429 pid: 121615 b: SOUDAL q: 7 st: 1 lt: 1 ean: 5411183009097 sr: SOUDAL 103421 sr_no_br: 103421 sr_no_br_cl: 103421 sr_cl: SOUDAL103421 sr_dash: sold: 160.151 p_range: none type: standard act: 1 avo: 1 av: Relative density 1,9 ADR packing group III ADR class 3 Weight 2 kg Principal hazard property GHS02 Flammable UN number UN3269 Conseils de prudence (P) P101; P102; P210; P260; P280; P303 + P361 + P353; P308 + P313; P362 + P364; P501 H-statements H226; H315; H319; H361D; H372 Hazard class GHS02 Flammable; GHS07 Harmful or irritant Physical state Liquid Flash point 34 °C Packaging Can n: SOUDAL Metal Plastic Standard polyester putty for bodywork grey (2kg) - 103421 cn: FILLING COMPOUND cn2: FILLING COMPOUND cn_clear: FILLINGCOMPOUND d: Product description: Metal Plastic Standard is a two component polyester putty based on unsaturated polyester resins. Characteristics: 2 components Very easy to apply Fast curing Excellent adhesion on all metals, even nonferro metals and zinc-coated substrates, polyester, wood Flexible Applications: Filling of dents, scratches and craks on car body and parts made from non-ferro metals or zinc coated steel, polyester Repair of damages on boats, surf boards etc. Directions for use: Method: Mix 2% B-component with the A-component. Ensure thorough mixing to achieve a homogeneous mixture. Do not mix more than can be applied within 5 minutes. Never deviate from the prescribed mixing ratio between A- and B-component. Every deviation of this mixting ratio will adverse the curing of the product and the final mechanical properties. Apply the mixed product by means of a spatula in a thin layer to the surface. Apply the filler in several layers if necessary. The putty can be sanded after 20 to 30 mins. Depending on ambient termperature. After curing repair can be continued (sanding, drilling, painting). Application temperature: +10°C to +25°C Cleaning: Uncured Metal Plastic Universal may be removed from tools with Acetone. Cured Metal Plastic Universal must be removed mechanically. Repair with: Metal Plastic Universal ds: dsc: kts: polyester putty for bodywork grey (2kg) kpn: Metal Plastic Standard kpn_dash: kpn_clear: MetalPlasticStandard bkpn: SOUDAL Metal Plastic Standard bkpn_clear: SOUDAL MetalPlasticStandard c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Filler | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal surface treatment and repair / Soudal other surface treatment / Soudal filler | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Filler sr_no_br_cl_ns: 103421 sr_ns: SOUDAL103421
r: 02334266 p: 12.727 pid: 122555 b: SOUDAL q: 2 st: 1 lt: 1 ean: 5411183009363 sr: SOUDAL 105975 sr_no_br: 105975 sr_no_br_cl: 105975 sr_cl: SOUDAL105975 sr_dash: sold: 127.27 p_range: none type: standard act: 1 avo: 1 av: EUH-statements EUH208; EUH212 Relative density 1,9 ADR packing group III Weight 2 kg UN number UN3269 Principal hazard property GHS02 Flammable ADR class 3 Conseils de prudence (P) P101; P102; P210; P264; P280; P303 + P361 + P353; P305 + P351 + P338; P308 + P313; P501 H-statements H226; H315; H319; H361D; H372 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS08 Health hazard Physical state Liquid Packaging Can n: SOUDAL Metal Plastic Soft polyester putty for bodywork beige (2kg) - 105975 cn: FILLING COMPOUND cn2: FILLING COMPOUND cn_clear: FILLINGCOMPOUND d: Product description: Metal Plastic Soft is a two component polyester putty based on unsaturated polyester resins. Characteristics: 2 components Very easy to apply Very easy to sand Fast curing Excellent adhesion on all metals, even nonferro metals and zinc- coated substrates, polyester, wood Flexible Applications: Filling of dents, scratches and craks on car body and parts made from non-ferro metals or zinc coated steel, polyester Repair of damages on boats, surf boards etc. Filling of scratches and dents in wooden surfaces Directions for use: Method: Mix 2% B-component with the A-component. Ensure thorough mixing to achieve a homogeneous mixture. Do not mix more than can Be applied within 5 minutes. Never deviate from the prescribed mixing ratio between A- and B-component. Every deviation of this mixing ratio will adverse the curing of the product and the final mechanical properties. Apply the mixed product by means of a spatula in a Thin layer to the surface. Apply the filler in several layers if necessary. The putty can be sanded after 20 to 30 mins. Depending on ambient termperature. After curing repair can be continued (sanding, painting etc.). Application temperature: +10°C to +25°C Cleaning: Uncured Metal Plastic Soft may be removed from tools with Acetone or any other solvent. Cured Metal Plastic Soft must be removed Mechanically. Repair with: Metal Plastic Soft ds: dsc: kts: polyester putty for bodywork beige (2kg) kpn: Metal Plastic Soft kpn_dash: kpn_clear: MetalPlasticSoft bkpn: SOUDAL Metal Plastic Soft bkpn_clear: SOUDAL MetalPlasticSoft c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Filler | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal surface treatment and repair / Soudal other surface treatment / Soudal filler sr_no_br_cl_ns: 105975 sr_ns: SOUDAL105975
r: 03225374 p: 6.32 pid: 123205 b: SOUDAL q: 0 st: lt: 8 ean: 5411183124141 sr: SOUDAL 126577 sr_no_br: 126577 sr_no_br_cl: 126577 sr_cl: SOUDAL126577 sr_dash: sold: 126.4 p_range: none type: standard act: 1 avo: 1 av: n: SOUDAL Soudatape OC waterproofing corner 105x150mm (2 pcs) - 126577 cn: DAMP-PROOFING cn2: DAMP-PROOFING cn_clear: DAMPPROOFING d: Product description: External corner piece. For sealing external 3D corners in bathrooms and showers. Applications: Watertight sealing of 3-dimensional (3D) corners in showers and bathrooms. For use in combination with Soudagum LM or Soudafoil ME. Instructions for use: The tapes are not self-adhesive and must be glued watertight using Soudagum LM or Soudabond MT. Press the Soudatape with its polypropylene part (Soudal logo facing upwards) well into the freshly applied adhesive. Work away any air bubbles with e.g. a spatula or putty knife. When used in combination with Soudagum LM, it is best to apply the tapes between the first and second layers. Apply the second layer of Soudagum LM also over the tapes so that they are fully incorporated into the liquid membrane. ds: dsc: kts: waterproofing corner 105x150mm (2 pcs) kpn: Soudatape OC kpn_dash: kpn_clear: SoudatapeOC bkpn: SOUDAL Soudatape OC bkpn_clear: SOUDAL SoudatapeOC c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Damp proofing | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal surface treatment and repair / Soudal other surface treatment / Soudal damp proofing | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Moisture barrier sr_no_br_cl_ns: 126577 sr_ns: SOUDAL126577
r: 03225373 p: 6.32 pid: 125557 b: SOUDAL q: 0 st: lt: 8 ean: 5411183124134 sr: SOUDAL 126578 sr_no_br: 126578 sr_no_br_cl: 126578 sr_cl: SOUDAL126578 sr_dash: sold: 126.4 p_range: none type: standard act: 1 avo: 1 av: Physical state Solid ADR class UN number ADR packing group n: SOUDAL Soudatape IC waterproofing tape 120x150mm (2 pcs) - 126578 cn: DAMP-PROOFING cn2: DAMP-PROOFING cn_clear: DAMPPROOFING d: Product description: Internal corner piece. For sealing internal 3D corners in bathrooms and showers. Applications: Watertight sealing of 3-dimensional (3D) corners in showers and bathrooms. For use in combination with Soudagum LM or Soudafoil ME. Instructions for use: The tapes are not self-adhesive and must be glued watertight using Soudagum LM or Soudabond MT. Press the Soudatape with its polypropylene part (Soudal logo facing upwards) well into the freshly applied adhesive. Work away any air bubbles with e.g. a spatula or putty knife. When used in combination with Soudagum LM, it is best to apply the tapes between the first and second layers. Apply the second layer of Soudagum LM also over the tapes so that they are fully incorporated into the liquid membrane. ds: dsc: kts: waterproofing tape 120x150mm (2 pcs) kpn: Soudatape IC kpn_dash: kpn_clear: SoudatapeIC bkpn: SOUDAL Soudatape IC bkpn_clear: SOUDAL SoudatapeIC c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Damp proofing | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal surface treatment and repair / Soudal other surface treatment / Soudal damp proofing | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Moisture barrier sr_no_br_cl_ns: 126578 sr_ns: SOUDAL126578
