What is this silicone remover used for?

It removes cured silicone residues and MS polymers from various surfaces.

How do you apply the remover?

Cut away excess sealant first, shake the bottle, and apply directly onto the residues.

What is the required penetration time?

Let the product penetrate for 10 to 15 minutes before removing the residues.

Does the product drip on vertical surfaces?

No, the formula does not drip during application.

Should the treated surface be rinsed after use?

Yes, rinse thoroughly with water after use to avoid surface degradation.

SOUDAL Silicone Remover silicone remover (100 ml) - 102853

Name: SOUDAL Silicone Remover silicone remover (100 ml) - 102853
Brand: SOUDAL
SKU: 02335154
Price: 10.82 EUR
Availability: InStock

Supplier number: SOUDAL 102853 | EAN 5411183032422

From 1 piece €10.82

From 12 pieces €10.28 - €6.49 saving

From 24 pieces €10.01 - €19.48 saving

From 36 pieces €9.74 - €38.97 saving

10.82 tax incl.

€8.95 excl. VAT (incl. all environmental contributions)

On stock - immediately available

Delivery by DHL

✆ Talk to a specialist

Effortless removal of sealant residues

Practical benefits

Soudal dissolves stubborn sealants: You easily soften and break down cured silicone and MS polymer residues across a wide range of surfaces.
Clean drip-free application: The non-sagging formula allows you to apply the liquid remover precisely where needed without messy run-off.
Fast preparation for resealing: Working in just ten minutes, it simplifies scraping away old residue so you can apply fresh sealant cleanly.

In a nutshell

The right choise for

With the Soudal silicone remover, you easily clear surfaces of stubborn, cured silicone sealants and ms polymers. Perfect for replacing old joints in bathrooms, kitchens, or around window frames, this cleaner thoroughly prepares the substrate without causing damage. After cutting away the bulk of the old sealant, apply the liquid formula directly onto the residue. Its non-sagging consistency does not drip on vertical surfaces, ensuring clean and controlled application. Working in just 10 to 15 minutes, it softens residues so you can scrape or wipe them away effortlessly. a quick rinse with water leaves the surface completely prepared for optimal adhesion of your fresh sealant layers.

Product information FAQ

€10.82

In stock - tax incl.

Key features according to our expert

Net volume: 100 ml
EUH-statements: EUH066
ADR packing group: Not applicable
ADR class: Not applicable
Principal hazard property: GHS07 Harmful or irritant
UN number: Not applicable
P-statements: P101; P102; P264; P280; P305 + P351 + P338; P337 + P313
H-statements: H319
Hazard class: GHS07 Harmful or irritant
Physical state: Liquid
Flash point: 75 °C
Packaging: Bottle

Precautionary statements

P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P264: Wash ... (see safety data sheet) thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337 + P313: If eye irritation persists: Get medical advice/attention.

Hazard statements

H319: Causes serious eye irritation.

Supplemental hazard information

EUH066: Repeated exposure may cause skin dryness or cracking.

All Features

Net volume: 100 ml
Euh-statements: EUH066
Adr packing group: Not applicable
Adr class: Not applicable
Principal hazard property: GHS07 Harmful or irritant
Un number: Not applicable
P-statements: P101; P102; P264; P280; P305 + P351 + P338; P337 + P313
H-statements: H319
Hazard class: GHS07 Harmful or irritant
Physical state: Liquid
Flash point: 75 °C
Packaging: Bottle
Packaging form: Bottle
Product content: 100 ml

Brand SOUDAL
02335154
EAN 5411183032422
Supplier number SOUDAL 102853

Frequently asked questions about this product

Answered by specialists

What is this silicone remover used for?: It removes cured silicone residues and MS polymers from various surfaces.
How do you apply the remover?: Cut away excess sealant first, shake the bottle, and apply directly onto the residues.
What is the required penetration time?: Let the product penetrate for 10 to 15 minutes before removing the residues.
Does the product drip on vertical surfaces?: No, the formula does not drip during application.
Should the treated surface be rinsed after use?: Yes, rinse thoroughly with water after use to avoid surface degradation.