What is Soudal Poly Liquid used for?

You use this 2C polyester resin with fiberglass matting to repair holes, cracks, and dents in metal, polyester, and wooden surfaces such as car bodies.

How do you mix this polyester resin?

Mix the required amount of Poly Liquid with 2% to 4% hardener until you obtain a fully homogeneous mixture without colour differences.

What is the recommended application temperature?

The recommended application temperature for this product is between 10 °C and 25 °C.

How do you finish a repair made with this resin?

Once cured, sand the surface with coarse sandpaper or a grinding disc, then apply a thin layer of body filler for a smooth finish.

What should you use to clean tools after application?

Clean uncured resin from your tools immediately using acetone.

SOUDAL Poly Liquid polyester resin for bodywork brown (1 kg) - 103438

Name: SOUDAL Poly Liquid polyester resin for bodywork brown (1 kg) - 103438
Brand: SOUDAL
SKU: 02798154
Price: 16.95 EUR
Availability: PreOrder

Supplier number: SOUDAL 103438 | EAN 5411183011137

Recommended Retail Price €18.58

16.95 tax incl.

€14.01 excl. VAT (incl. all environmental contributions)

On order: delivered from 03/10/2026

The minimum purchase order quantity for the product is 6.

Delivery by DHL

↓ Documents (1) ✆ Talk to a specialist

Reliable bodywork repairs with Soudal Poly Liquid

Practical benefits

High strength repair: Used together with fibreglass matting, you reinforce rusted areas and repair holes with long-lasting structural strength.
Fast chemical curing: The pre-accelerated two-component liquid cures quickly so you can proceed with sanding and finishing without delays.
Multi material versatility: You can easily apply this resin to various surfaces including metal, polyester, and wood for consistent bonding.

In a nutshell

The right choise for

With Soudal Poly Liquid, you repair rusted sheet metal, holes, and cracks with dependable structural strength. Used in combination with fibreglass matting, this pre-accelerated two-component liquid polyester resin creates a tough, reliable bond on metal, wood, and polyester. Whether you are restoring vehicle bodywork, repairing boats, or laminating structures, it seals and reinforces damaged areas without the direct need for welding. Simply mix with 2% to 4% hardener for fast chemical curing at temperatures between 10 °C and 25 °C. Once cured, sand the surface and apply a body filler for a smooth, lasting finish.

Product information FAQ

€16.95

tax incl.

Key features according to our expert

Weight: 1 kg
Principal hazard property: GHS02 Flammable
Relative density: 1
ADR packing group: III
UN number: UN3269; UN3108
ADR class: 3; 5.2
Physical state: Liquid
Flash point: 23 °C
H-statements: H226; H315; H317; H319; H332; H335; H361D; H372; H412; H242; H400; H410
P-statements: P210; P260; P280; P303 + P361 + P353; P304 + P340; P308 + P313; P101; P102; P264; P305 + P351 + P338; P403 + P235; P501
Hazard class: GHS02 Flammable; GHS07 Harmful or irritant; GHS08 Health hazard; GHS09 Environmental hazard

Product description:

POLYESTERLIQUID 1000.GRAM

Pre-accelerated polyester resin.
- To be used with fibreglass mat art.no. 12.54.0520
and hardener 12.54.0480

Precautionary statements

P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P260: Do not breathe dust/fume/gas/mist/vapours/spray.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water (or shower).
P304 + P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P308 + P313: IF exposed or concerned: Get medical advice/attention.
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P264: Wash ... (see safety data sheet) thoroughly after handling.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P403 + P235: Store in a well-ventilated place. Keep cool.
P501: Dispose of contents/container to ... (see safety data sheet).

Hazard statements

H226: Flammable liquid and vapour.
H315: Causes skin irritation.
H317: May cause an allergic skin reaction.
H319: Causes serious eye irritation.
H332: Harmful if inhaled.
H335: May cause respiratory irritation.
H361D: Suspected of damaging the unborn child.
H372: Causes damage to organs through prolonged or repeated exposure.
H412: Harmful to aquatic life with long lasting effects.
H242: Heating may cause a fire.
H400: Very toxic to aquatic life.
H410: Very toxic to aquatic life with long lasting effects.

Documents

⤓ Safety sheet PDF

All Features

Weight: 1 kg
Principal hazard property: GHS02 Flammable
Relative density: 1
Adr packing group: III
Un number: UN3269; UN3108
Adr class: 3; 5.2
Physical state: Liquid
Flash point: 23 °C
H-statements: H226; H315; H317; H319; H332; H335; H361D; H372; H412; H242; H400; H410
P-statements: P210; P260; P280; P303 + P361 + P353; P304 + P340; P308 + P313; P101; P102; P264; P305 + P351 + P338; P403 + P235; P501
Hazard class: GHS02 Flammable; GHS07 Harmful or irritant; GHS08 Health hazard; GHS09 Environmental hazard
Colour: brown
Packaging form: Tin
Product content: 1 kg

Brand SOUDAL
02798154
EAN 5411183011137
Supplier number SOUDAL 103438

Frequently asked questions about this product

Answered by specialists

What is Soudal Poly Liquid used for?: You use this 2C polyester resin with fiberglass matting to repair holes, cracks, and dents in metal, polyester, and wooden surfaces such as car bodies.
How do you mix this polyester resin?: Mix the required amount of Poly Liquid with 2% to 4% hardener until you obtain a fully homogeneous mixture without colour differences.
What is the recommended application temperature?: The recommended application temperature for this product is between 10 °C and 25 °C.
How do you finish a repair made with this resin?: Once cured, sand the surface with coarse sandpaper or a grinding disc, then apply a thin layer of body filler for a smooth finish.
What should you use to clean tools after application?: Clean uncured resin from your tools immediately using acetone.