r: 03213545 p: 100.495 pid: 125461 b: SOUDAL q: 0 st: lt: 8 ean: 5411183161252 sr: SOUDAL 145787 sr_no_br: 145787 sr_no_br_cl: 145787 sr_cl: SOUDAL145787 sr_dash: sold: 401.98 p_range: none type: standard act: 1 avo: 1 av: Weight 1 kg ADR packing group UN number ADR class EUH-statements EUH208; EUH210 Physical state Liquid n: SOUDAL Soudatight SP air- and vapour-tight membrane black 11 kg - 145787 cn: COATING cn2: COATING cn_clear: COATING d: Product description: Soudatight SP is the sprayable version of Soudatight LQ, only the glass fibres are logically omitted. This product can be very easily and quickly sprayed to form a liquid, air- and vapour-tight membrane on larger surfaces and on the connections between these surfaces (floor-wall, wall-ceiling, etc.). Forms a seamless elastic membrane after drying, which is an ideal base for painting or plastering. Best used in combination with Soudatight LQ for optimum results. Soudatight SP is applied using airless spray equipment. Properties: Air- and vapour-tight Very good adhesion to many porous materials Good adhesion on slightly damp substrates Permanently elastic after curing and very durable Can be painted over and plastered after drying Complies with GEV-EMICODE EC-1 PLUS: very low emission Applications: For air- and vapour-tight finishing of window connections, wall-floor connections, wall-ceiling connections and surfaces (no roof applications). Instructions for use: Make sure that Soudatight SP is at room temperature before use. Shake or stir well before use. Soudatight SP is applied to the substrate using airless or air-assisted spraying equipment directly from the packaging. The choice of spraying equipment, pressure, gun and spray tip depends on the application. Contact Soudal for further tailor-made information. Apply the air sealing paste undiluted and evenly in several layers (at least 2) to the substrate to a layer thickness of minimum 1 mm and maximum 3 mm. For best coverage, apply the product at a different angle the second time. It is recommended to apply the 2nd coat only after skin formation occurs with the first coat. The application thickness should be measured (wet) using a thickness gauge. For window applications ensure that the airtightness paste forms a seamless membrane of at least 3 mm on the window frame, over the flexible foam up to ± 5 cm on the day side of the building shell. The use of masking tape (on the window frame) is recommended. However, this should be removed shortly after application of Soudatight SP, before curing. For wall connections, ensure that the airtightness paste forms a seamless membrane of ± 15 cm on both surfaces. Before curing, Soudatight SP can be removed from materials and tools with water. ds: dsc: kts: air- and vapour-tight membrane black 11 kg kpn: Soudatight SP kpn_dash: kpn_clear: SoudatightSP bkpn: SOUDAL Soudatight SP bkpn_clear: SOUDAL SoudatightSP c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal surface treatment and repair / Soudal other surface treatment / Soudal coating sr_no_br_cl_ns: 145787 sr_ns: SOUDAL145787
r: 03225370 p: 16.363 pid: 125554 b: SOUDAL q: 0 st: lt: 8 ean: 5411183124127 sr: SOUDAL 126579 sr_no_br: 126579 sr_no_br_cl: 126579 sr_cl: SOUDAL126579 sr_dash: sold: 327.26 p_range: none type: standard act: 1 avo: 1 av: Physical state Solid ADR class UN number ADR packing group n: SOUDAL Soudatape ST waterproofing tape 120mm 10m - 126579 cn: DAMP-PROOFING cn2: DAMP-PROOFING cn_clear: DAMPPROOFING d: Product description: Waterproofing tape. For sealing 2D corners between walls and floors in bathrooms and showers. Applications: Waterproof sealing of 2-dimensional (2D) corners in showers and bathrooms. For use in combination with Soudagum LM or Soudafoil ME. Instructions for use: The tapes are not self-adhesive and must be glued watertight using Soudagum LM or Soudabond MT. Press the Soudatape with its polypropylene part (Soudal logo facing upwards) well into the freshly applied adhesive. Work away any air bubbles with e.g. a spatula or putty knife. When used in combination with Soudagum LM, it is best to apply the tapes between the first and second layers. Apply the second layer of Soudagum LM also over the tapes so that they are fully incorporated into the liquid membrane. ds: dsc: kts: waterproofing tape 120mm 10m kpn: Soudatape ST kpn_dash: kpn_clear: SoudatapeST bkpn: SOUDAL Soudatape ST bkpn_clear: SOUDAL SoudatapeST c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Damp proofing | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal surface treatment and repair / Soudal other surface treatment / Soudal damp proofing sr_no_br_cl_ns: 126579 sr_ns: SOUDAL126579
r: 08085330 p: 148.429 pid: 106300 b: SOUDAL q: 0 st: lt: 8 ean: 5411183173897 sr: SOUDAL 155295 sr_no_br: 155295 sr_no_br_cl: 155295 sr_cl: SOUDAL155295 sr_dash: sold: 296.858 p_range: none type: standard act: 1 avo: 1 av: EUH-statements EUH208; EUH210 ADR packing group ADR class Weight 10 kg UN number Physical state Liquid Flash point >100 °C Packaging Bucket n: SOUDAL Soudatight WP one-component air- and waterproof membrane in bucket (10 kg) - 155295 cn: COATING cn2: COATING cn_clear: COATING d: Product description: Soudatight WP is a one-component liquid membrane based on hybrid polymers, specially developed for waterproofing exterior window-floor joints (such as in balcony and terrace windows). Also suitable for waterproofing the reveal side in insulated precast concrete panels. After curing, Soudatight WP forms a seamless, elastic, vapour-permeable and waterproof membrane, which can be plastered and painted over. The product should be applied in 2 layers, with Soudatextile between the two layers. Properties: Waterproof Resistant to standing water Vapour open Rainproof after 2 hours Airtight Ready to use: one-component system Good crack bridging Good adhesion on slightly damp and dusty substrates Solvent- and isocyanate-free Applications: For watertight finishing of window-floor connections such as in terraces and balconies, plinth connections and foundations (above ground), the day edges in insulated precast concrete panels and connection joints between precast concrete elements. Instructions for use: Soudatight WP can be applied directly to the surface with a flat brush. Apply the coating undiluted and evenly in a layer at least 1 mm thick (1/2 to 2/3 of the total layer thickness). Place Soudatextile in the still wet layer, avoid folds and air inclusions and press Soudatextile firmly into the wet layer with a brush or a putty knife. Multiple layers of fleece should overlap by 3-5 cm. Cut reinforcements for corners or penetrations in advance and apply them before the longer flat pieces. Apply a second layer of Soudatight WP (1/2 to 1/3 of the total layer thickness) on top of Soudatextile, preferably 1 cm wider than the fleece itself. The use of masking tape (on the window frame) is recommended, remove the tape shortly after applying Soudatight WP for curing. ds: dsc: kts: one-component air- and waterproof membrane in bucket (10 kg) kpn: Soudatight WP kpn_dash: kpn_clear: SoudatightWP bkpn: SOUDAL Soudatight WP bkpn_clear: SOUDAL SoudatightWP c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal surface treatment and repair / Soudal other surface treatment / Soudal coating sr_no_br_cl_ns: 155295 sr_ns: SOUDAL155295
