soudal_103420

SOUDAL Metal Plastic Standard polyester putty for bodywork grey (1kg) - 103420

SOUDAL
Supplier number: SOUDAL 103420 | EAN 5411183009080
10.31 tax incl.
€8.52 excl. VAT (incl. all environmental contributions)
On stock - immediately available

  • Delivery by DHL
↓ Documents (1) ✆ Talk to a specialist
  • GHS02 Flammable
  • GHS07 Harmful
  • GHS08 Hazardous to long-term health

Smooth bodywork repairs with Soudal

Practical benefits
  • Quick and easy application: You mix the two components smoothly and spread the pliable paste effortlessly using a putty knife across damaged surfaces.
  • Fast curing and sanding: Thanks to rapid chemical curing, you can begin sanding, drilling, or painting your repair within twenty to thirty minutes.
  • Long lasting multi-surface adhesion: You reliably fill scratches, tears, and dents across metal panels, polyester automotive components, and wooden workpieces.

In a nutshell

The right choise for

Repair dents, scratches, and surface imperfections on bodywork and sheet metal with Soudal Metal Plastic Standard polyester filler. You easily mix this two-component paste with 2 to 3% hardener into a smooth compound that adheres firmly to metal, galvanized steel, polyester, and wood. With a working time of 5 minutes, you can spread and level damaged areas cleanly with a putty knife. Thanks to rapid chemical curing, the repaired spot is ready for sanding or painting within twenty to thirty minutes. This 1kg can provides a dependable solution to restore panels and achieve a smooth, professional finish.



Product information FAQ
€10.31
In stock - tax incl.

Product information

Key features according to our expert

  • Principal hazard property: GHS02 Flammable
  • Relative density: 1,9
  • ADR packing group: III
  • Packaging: Can
  • UN number: UN3269
  • ADR class: 3
  • P-statements: P101; P102; P210; P260; P280; P303 + P361 + P353; P308 + P313; P362 + P364; P501
  • H-statements: H226; H315; H319; H361D; H372
  • Hazard class: GHS02 Flammable; GHS07 Harmful or irritant; GHS08 Health hazard
  • Physical state: Liquid
  • Flash point: 34 °C

Product description:

  • Metal Plastic Standard is a two component polyester putty based on unsaturated polyester resins.

Characteristics:

  • 2 components
  • Very easy to apply
  • Fast curing
  • Excellent adhesion on all metals, even nonferro metals and zinc-coated substrates, polyester, wood
  • Flexible

Applications:

  • Filling of dents, scratches and craks on car body and parts made from non-ferro metals or zinc coated steel, polyester
  • Repair of damages on boats, surf boards etc.

Directions for use:

  • Method: Mix 2% B-component with the A-component. Ensure thorough mixing to achieve a homogeneous mixture. Do not mix more than can be applied within 5 minutes. Never deviate from the prescribed mixing ratio between A- and B-component. Every deviation of this mixting ratio will adverse the curing of the product and the final mechanical properties. Apply the mixed product by means of a spatula in a thin layer to the surface. Apply the filler in several layers if necessary. The putty can be sanded after 20 to 30 mins. Depending on ambient termperature. After curing repair can be continued (sanding, drilling, painting).
  • Application temperature: +10°C to +25°C
  • Cleaning: Uncured Metal Plastic Universal may be removed from tools with Acetone. Cured Metal Plastic Universal must be removed mechanically.
  • Repair with: Metal Plastic Universal
Precautionary statements
  • P101: If medical advice is needed, have product container or label at hand.
  • P102: Keep out of reach of children.
  • P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • P260: Do not breathe dust/fume/gas/mist/vapours/spray.
  • P280: Wear protective gloves/protective clothing/eye protection/face protection.
  • P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water (or shower).
  • P308 + P313: IF exposed or concerned: Get medical advice/attention.
  • P362 + P364: Take off contaminated clothing and wash it before reuse.
  • P501: Dispose of contents/container to ... (see safety data sheet).
Hazard statements
  • H226: Flammable liquid and vapour.
  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H361D: Suspected of damaging the unborn child.
  • H372: Causes damage to organs through prolonged or repeated exposure.

Documents

⤓ Safety sheet PDF

All Features

Principal hazard property
GHS02 Flammable
Relative density
1,9
Adr packing group
III
Packaging
Can
Un number
UN3269
Adr class
3
P-statements
P101; P102; P210; P260; P280; P303 + P361 + P353; P308 + P313; P362 + P364; P501
H-statements
H226; H315; H319; H361D; H372
Hazard class
GHS02 Flammable; GHS07 Harmful or irritant; GHS08 Health hazard
Physical state
Liquid
Flash point
34 °C
Packaging form
Tin
Product content
1 kg
  • Brand SOUDAL
  • EAN 5411183009080
  • Supplier number SOUDAL 103420

Frequently asked questions about this product

Answered by specialists
Which substrates is this polyester filler suitable for?
You can use this 2-component filler on metal (including zinc and galvanized steel), polyester, and wood.
How much hardener should you mix in?
Mix the filler paste with 2 to 3% hardener until a streak-free, uniform compound is formed.
What is the working time after mixing?
The pot life of the mixture is 5 minutes.
Can the filler be sanded and painted after curing?
Yes, once fully cured, the repaired area can be sanded, primed, and painted.
How do you clean tools after application?
Clean uncured filler from your tools using acetone.
Questions about this product?

Our product specialists are happy to help with any questions about this range. Call, email or chat with us!

Chat with us
0032 3 74 000 41 [email protected]

Viewed products

⚠️
Connection lost
Oops! It looks like you lost your connection. Page was automaticaly reload.