r: 03213549 p: 143.471 pid: 125466 b: SOUDAL q: 2 st: 1 lt: 1 ean: 5411183152762 sr: SOUDAL 134739 sr_no_br: 134739 sr_no_br_cl: 134739 sr_cl: SOUDAL134739 sr_dash: sold: 4017.188 p_range: none type: standard act: 1 avo: 1 av: Weight 1 kg Relative density 1,15 ADR packing group Packaging Bucket UN number ADR class EUH-statements EUH208; EUH210 Physical state Liquid n: SOUDAL Soudatight SP air- and vapour-tight membrane black 16 kg - 134739 cn: COATING cn2: COATING cn_clear: COATING d: Product description: Soudatight SP is the sprayable version of Soudatight LQ, only the glass fibres are logically omitted. This product can be very easily and quickly sprayed to form a liquid, air- and vapour-tight membrane on larger surfaces and on the connections between these surfaces (floor-wall, wall-ceiling, etc.). Forms a seamless elastic membrane after drying, which is an ideal base for painting or plastering. Best used in combination with Soudatight LQ for optimum results. Soudatight SP is applied using airless spray equipment. Properties: Air- and vapour-tight Very good adhesion to many porous materials Good adhesion on slightly damp substrates Permanently elastic after curing and very durable Can be painted over and plastered after drying Complies with GEV-EMICODE EC-1 PLUS: very low emission Applications: For air- and vapour-tight finishing of window connections, wall-floor connections, wall-ceiling connections and surfaces (no roof applications). Instructions for use: Make sure that Soudatight SP is at room temperature before use. Shake or stir well before use. Soudatight SP is applied to the substrate using airless or air-assisted spraying equipment directly from the packaging. The choice of spraying equipment, pressure, gun and spray tip depends on the application. Contact Soudal for further tailor-made information. Apply the air sealing paste undiluted and evenly in several layers (at least 2) to the substrate to a layer thickness of minimum 1 mm and maximum 3 mm. For best coverage, apply the product at a different angle the second time. It is recommended to apply the 2nd coat only after skin formation occurs with the first coat. The application thickness should be measured (wet) using a thickness gauge. For window applications ensure that the airtightness paste forms a seamless membrane of at least 3 mm on the window frame, over the flexible foam up to ± 5 cm on the day side of the building shell. The use of masking tape (on the window frame) is recommended. However, this should be removed shortly after application of Soudatight SP, before curing. For wall connections, ensure that the airtightness paste forms a seamless membrane of ± 15 cm on both surfaces. Before curing, Soudatight SP can be removed from materials and tools with water. ds: dsc: kts: air- and vapour-tight membrane black 16 kg kpn: Soudatight SP kpn_dash: kpn_clear: SoudatightSP bkpn: SOUDAL Soudatight SP bkpn_clear: SOUDAL SoudatightSP c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal surface treatment and repair / Soudal other surface treatment / Soudal coating sr_no_br_cl_ns: 134739 sr_ns: SOUDAL134739
r: 03213554 p: 54.876 pid: 123053 b: SOUDAL q: 0 st: lt: 17 ean: 5411183161245 sr: SOUDAL 145786 sr_no_br: 145786 sr_no_br_cl: 145786 sr_cl: SOUDAL145786 sr_dash: sold: 1646.28 p_range: none type: standard act: 1 avo: 1 av: Weight 6 kg Relative density 1,5 ADR packing group Packaging Bucket UN number ADR class EUH-statements EUH210 Physical state Solid Flash point >100 °C n: SOUDAL Soudatight Hybrid air- and impact-proof membrane 6 kg - 145786 cn: COATING cn2: COATING cn_clear: COATING d: Product description: Soudatight Hybrid is the hybrid version of Soudatight and can be used for both indoor and outdoor applications. This product allows very easy and fast application of a liquid, airtight membrane to penetrations, connections and surfaces (no roof applications). Soudatight Hybrid can be applied as a crease with a flat brush or using a hand, battery or pneumatic sealant gun. With the Cox Jetflow 3 Sachet 600 spray gun, Soudatight Hybrid can be applied both as a crease and sprayed as a coating. Properties: For exterior applications (interior applications also possible) Very good adhesion to most substrates Good adhesion on slightly damp substrates Permanently elastic after curing and very durable Solvent- and isocyanate-free Complies with GEV-EMICODE EC-1 PLUS: very low emission Can be painted over Applications: For the air- and watertight finishing of penetrations, connections, surfaces (no roof applications) and window connections such as the inside inner leaf (day side), the outside inner leaf (for installation of facade insulation), under the window sill, the outside solid walls and the outside ventilated facades. Instructions for use: Ensure that Soudatight Hybrid is at room temperature before use. Soudatight Hybrid is applied to the substrate directly from the packaging using a flat brush or sealant gun (hand, battery or pneumatic). Spread the airtightness paste undiluted and evenly with a (flat) brush to form a seamless film of at least 1 mm thick, to be applied in several layers. Soudatight Hybrid can also be applied with a pneumatic spray gun (Cox Jetflow 3 Sachet 600) as a bead or sprayed as a coating. By turning the spray tip, one has the choice between a crease and spray application (spray = more open = apply less product). When using the Cox Jetflow 3, spraying is optimal at 5 to 6 bar with the spray tip +/- 75% open. Even after spraying, always smooth with a (flat) brush and respect the minimum layer thickness. The application thickness should be measured (wet) with a thickness gauge. For window applications, ensure that the air and watertightness paste forms a seamless membrane of at least 10 mm on the window frame, over the flexible foam up to ± 5 cm on the night side of the shell. The use of masking tape (on the window frame) is recommended. However, this should be removed shortly after application of Soudatight Hybrid, before curing. Soudatight Hybrid can be removed from materials and tools with Soudal Surface Cleaner, White Spirit or Swipex, before curing has taken place. ds: dsc: kts: air- and impact-proof membrane 6 kg kpn: Soudatight Hybrid kpn_dash: kpn_clear: SoudatightHybrid bkpn: SOUDAL Soudatight Hybrid bkpn_clear: SOUDAL SoudatightHybrid c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal surface treatment and repair / Soudal other surface treatment / Soudal coating sr_no_br_cl_ns: 145786 sr_ns: SOUDAL145786
r: 03213546 p: 100.165 pid: 123049 b: SOUDAL q: 0 st: lt: 5 ean: 5411183161276 sr: SOUDAL 145789 sr_no_br: 145789 sr_no_br_cl: 145789 sr_cl: SOUDAL145789 sr_dash: sold: 1302.145 p_range: none type: standard act: 1 avo: 1 av: Weight 1 kg ADR packing group UN number ADR class EUH-statements EUH208; EUH210 Physical state Liquid n: SOUDAL Soudatight SP air- and vapour-tight membrane white 11 kg - 145789 cn: COATING cn2: COATING cn_clear: COATING d: Product description: Soudatight SP is the sprayable version of Soudatight LQ, only the glass fibres are logically omitted. This product can be very easily and quickly sprayed to form a liquid, air- and vapour-tight membrane on larger surfaces and on the connections between these surfaces (floor-wall, wall-ceiling, etc.). Forms a seamless elastic membrane after drying, which is an ideal base for painting or plastering. Best used in combination with Soudatight LQ for optimum results. Soudatight SP is applied using airless spray equipment. Properties: Air- and vapour-tight Very good adhesion to many porous materials Good adhesion on slightly damp substrates Permanently elastic after curing and very durable Can be painted over and plastered after drying Complies with GEV-EMICODE EC-1 PLUS: very low emission Applications: For air- and vapour-tight finishing of window connections, wall-floor connections, wall-ceiling connections and surfaces (no roof applications). Instructions for use: Make sure that Soudatight SP is at room temperature before use. Shake or stir well before use. Soudatight SP is applied to the substrate using airless or air-assisted spraying equipment directly from the packaging. The choice of spraying equipment, pressure, gun and spray tip depends on the application. Contact Soudal for further tailor-made information. Apply the air sealing paste undiluted and evenly in several layers (at least 2) to the substrate to a layer thickness of minimum 1 mm and maximum 3 mm. For best coverage, apply the product at a different angle the second time. It is recommended to apply the 2nd coat only after skin formation occurs with the first coat. The application thickness should be measured (wet) using a thickness gauge. For window applications ensure that the airtightness paste forms a seamless membrane of at least 3 mm on the window frame, over the flexible foam up to ± 5 cm on the day side of the building shell. The use of masking tape (on the window frame) is recommended. However, this should be removed shortly after application of Soudatight SP, before curing. For wall connections, ensure that the airtightness paste forms a seamless membrane of ± 15 cm on both surfaces. Before curing, Soudatight SP can be removed from materials and tools with water. ds: dsc: kts: air- and vapour-tight membrane white 11 kg kpn: Soudatight SP kpn_dash: kpn_clear: SoudatightSP bkpn: SOUDAL Soudatight SP bkpn_clear: SOUDAL SoudatightSP c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal surface treatment and repair / Soudal other surface treatment / Soudal coating sr_no_br_cl_ns: 145789 sr_ns: SOUDAL145789
r: 03213545 p: 99.669 pid: 125461 b: SOUDAL q: 0 st: lt: 8 ean: 5411183161252 sr: SOUDAL 145787 sr_no_br: 145787 sr_no_br_cl: 145787 sr_cl: SOUDAL145787 sr_dash: sold: 398.676 p_range: none type: standard act: 1 avo: 1 av: Weight 1 kg ADR packing group UN number ADR class EUH-statements EUH208; EUH210 Physical state Liquid n: SOUDAL Soudatight SP air- and vapour-tight membrane black 11 kg - 145787 cn: COATING cn2: COATING cn_clear: COATING d: Product description: Soudatight SP is the sprayable version of Soudatight LQ, only the glass fibres are logically omitted. This product can be very easily and quickly sprayed to form a liquid, air- and vapour-tight membrane on larger surfaces and on the connections between these surfaces (floor-wall, wall-ceiling, etc.). Forms a seamless elastic membrane after drying, which is an ideal base for painting or plastering. Best used in combination with Soudatight LQ for optimum results. Soudatight SP is applied using airless spray equipment. Properties: Air- and vapour-tight Very good adhesion to many porous materials Good adhesion on slightly damp substrates Permanently elastic after curing and very durable Can be painted over and plastered after drying Complies with GEV-EMICODE EC-1 PLUS: very low emission Applications: For air- and vapour-tight finishing of window connections, wall-floor connections, wall-ceiling connections and surfaces (no roof applications). Instructions for use: Make sure that Soudatight SP is at room temperature before use. Shake or stir well before use. Soudatight SP is applied to the substrate using airless or air-assisted spraying equipment directly from the packaging. The choice of spraying equipment, pressure, gun and spray tip depends on the application. Contact Soudal for further tailor-made information. Apply the air sealing paste undiluted and evenly in several layers (at least 2) to the substrate to a layer thickness of minimum 1 mm and maximum 3 mm. For best coverage, apply the product at a different angle the second time. It is recommended to apply the 2nd coat only after skin formation occurs with the first coat. The application thickness should be measured (wet) using a thickness gauge. For window applications ensure that the airtightness paste forms a seamless membrane of at least 3 mm on the window frame, over the flexible foam up to ± 5 cm on the day side of the building shell. The use of masking tape (on the window frame) is recommended. However, this should be removed shortly after application of Soudatight SP, before curing. For wall connections, ensure that the airtightness paste forms a seamless membrane of ± 15 cm on both surfaces. Before curing, Soudatight SP can be removed from materials and tools with water. ds: dsc: kts: air- and vapour-tight membrane black 11 kg kpn: Soudatight SP kpn_dash: kpn_clear: SoudatightSP bkpn: SOUDAL Soudatight SP bkpn_clear: SOUDAL SoudatightSP c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal surface treatment and repair / Soudal other surface treatment / Soudal coating sr_no_br_cl_ns: 145787 sr_ns: SOUDAL145787
r: 08085330 p: 149.752 pid: 106300 b: SOUDAL q: 0 st: lt: 8 ean: 5411183173897 sr: SOUDAL 155295 sr_no_br: 155295 sr_no_br_cl: 155295 sr_cl: SOUDAL155295 sr_dash: sold: 299.504 p_range: none type: standard act: 1 avo: 1 av: EUH-statements EUH208; EUH210 ADR packing group ADR class Weight 10 kg UN number Physical state Liquid Flash point >100 °C Packaging Bucket n: SOUDAL Soudatight WP one-component air- and waterproof membrane in bucket (10 kg) - 155295 cn: COATING cn2: COATING cn_clear: COATING d: Product description: Soudatight WP is a one-component liquid membrane based on hybrid polymers, specially developed for waterproofing exterior window-floor joints (such as in balcony and terrace windows). Also suitable for waterproofing the reveal side in insulated precast concrete panels. After curing, Soudatight WP forms a seamless, elastic, vapour-permeable and waterproof membrane, which can be plastered and painted over. The product should be applied in 2 layers, with Soudatextile between the two layers. Properties: Waterproof Resistant to standing water Vapour open Rainproof after 2 hours Airtight Ready to use: one-component system Good crack bridging Good adhesion on slightly damp and dusty substrates Solvent- and isocyanate-free Applications: For watertight finishing of window-floor connections such as in terraces and balconies, plinth connections and foundations (above ground), the day edges in insulated precast concrete panels and connection joints between precast concrete elements. Instructions for use: Soudatight WP can be applied directly to the surface with a flat brush. Apply the coating undiluted and evenly in a layer at least 1 mm thick (1/2 to 2/3 of the total layer thickness). Place Soudatextile in the still wet layer, avoid folds and air inclusions and press Soudatextile firmly into the wet layer with a brush or a putty knife. Multiple layers of fleece should overlap by 3-5 cm. Cut reinforcements for corners or penetrations in advance and apply them before the longer flat pieces. Apply a second layer of Soudatight WP (1/2 to 1/3 of the total layer thickness) on top of Soudatextile, preferably 1 cm wider than the fleece itself. The use of masking tape (on the window frame) is recommended, remove the tape shortly after applying Soudatight WP for curing. ds: dsc: kts: one-component air- and waterproof membrane in bucket (10 kg) kpn: Soudatight WP kpn_dash: kpn_clear: SoudatightWP bkpn: SOUDAL Soudatight WP bkpn_clear: SOUDAL SoudatightWP c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal surface treatment and repair / Soudal other surface treatment / Soudal coating sr_no_br_cl_ns: 155295 sr_ns: SOUDAL155295
r: 08085328 p: 6.793 pid: 105719 b: SOUDAL q: 0 st: lt: 8 ean: 5411183177116 sr: SOUDAL 156469 sr_no_br: 156469 sr_no_br_cl: 156469 sr_cl: SOUDAL156469 sr_dash: sold: 163.032 p_range: none type: standard act: 1 avo: 1 av: Net volume 600 ml EUH-statements EUH208; EUH210 ADR packing group ADR class UN number Physical state Liquid Packaging Sausage n: SOUDAL Soudatight SP coating black (600 ml) - 156469 cn: COATING cn2: COATING cn_clear: COATING d: Product description: Soudatight SP is the sprayable version of Soudatight LQ, only the glass fibres are logically omitted. This product can be very easily and quickly sprayed to form a liquid, air- and vapour-tight membrane on larger surfaces and on the connections between these surfaces (floor-wall, wall-ceiling, etc.). Forms a seamless elastic membrane after drying, which is an ideal base for painting or plastering. Best used in combination with Soudatight LQ for optimum results. Soudatight SP is applied using airless spray equipment. Properties: Air- and vapour-tight Very good adhesion to many porous materials Good adhesion on slightly damp substrates Permanently elastic after curing and very durable Can be painted over and plastered after drying Complies with GEV-EMICODE EC-1 PLUS: very low emission Applications: For air- and vapour-tight finishing of window connections, wall-floor connections, wall-ceiling connections and surfaces (no roof applications). Instructions for use: Make sure that Soudatight SP is at room temperature before use. Shake or stir well before use. Soudatight SP is applied to the substrate using airless or air-assisted spraying equipment directly from the packaging. The choice of spraying equipment, pressure, gun and spray tip depends on the application. Contact Soudal for further tailor-made information. Apply the air sealing paste undiluted and evenly in several layers (at least 2) to the substrate to a layer thickness of minimum 1 mm and maximum 3 mm. For best coverage, apply the product at a different angle the second time. It is recommended to apply the 2nd coat only after skin formation occurs with the first coat. The application thickness should be measured (wet) using a thickness gauge. For window applications ensure that the airtightness paste forms a seamless membrane of at least 3 mm on the window frame, over the flexible foam up to ± 5 cm on the day side of the building shell. The use of masking tape (on the window frame) is recommended. However, this should be removed shortly after application of Soudatight SP, before curing. For wall connections, ensure that the airtightness paste forms a seamless membrane of ± 15 cm on both surfaces. Before curing, Soudatight SP can be removed from materials and tools with water. ds: dsc: kts: coating black (600 ml) kpn: Soudatight SP kpn_dash: kpn_clear: SoudatightSP bkpn: SOUDAL Soudatight SP bkpn_clear: SOUDAL SoudatightSP c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal surface treatment and repair / Soudal other surface treatment / Soudal coating | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Coating sr_no_br_cl_ns: 156469 sr_ns: SOUDAL156469
