r: 02335033 p: 5.118 pid: 124929 b: SOUDAL q: 0 st: lt: 8 ean: 5411183001671 sr: SOUDAL 102421 sr_no_br: 102421 sr_no_br_cl: 102421 sr_cl: SOUDAL102421 sr_dash: sold: 81.888 p_range: none type: standard act: 1 avo: 1 av: Net volume 300 ml EUH-statements EUH210 Relative density 1 ADR packing group ADR class Colour (manufacturer) Teak UN number Physical state Liquid Flash point >100 °C Fire resistant No Packaging Cartridge n: SOUDAL Silirub 2 neutral silicone teak (310 ml) - 102421 cn: SILICONE cn2: SILICONE cn_clear: SILICONE d: Product description: Silirub 2 is a high-quality neutral, elastic onecomponent joint sealant based on silicones. Characteristics: Very easy application Permanent colour, UV-resistant Stays elastic after curing Available in a wide range of colours Very good adhesion on many materials Low modulus Excellent acoustic properties (noise reduction) Applications: Buildingand construction joints Topsealing at glazing jobs Joints with high movement between different building materials Sealings between treated wood, metal, PVC profiles and glass Directions for use: Type: all usual building surfaces State of Surface: clean, dry, free of dust and grease Preparation: for certain applications apply Primer 150 on porous surfaces (see primer table) - no primer required for non porous surfaces. Surface Activator should be used to enhance adhesion to non porous surfaces. We recommend a preliminary compatibility test. Remarks: Do not use on natural stones like marble, granite, (staining effect). Use Silirub MA for these applications.Not recommended for use on PC and PMMA because it can cause crazing (stress cracking) in these materials. Use an alkoxy type instead onthese materials.Technical Norms/Conforms with: Belgium: ATG 1808 (NIT 107) Rapport IANESCO 3812-label alimentaire for applications in food surroundings Gemany: DIN 18540 Teil 2 - DIN 18545 Teil 2 Dichtstoffgruppe E United Kingdom: BS 5889 Type A USA: TTS 001543a Class A ds: dsc: kts: neutral silicone teak (310 ml) kpn: Silirub 2 kpn_dash: kpn_clear: Silirub2 bkpn: SOUDAL Silirub 2 bkpn_clear: SOUDAL Silirub2 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Silicone | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal silicone | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Silicone sr_no_br_cl_ns: 102421 sr_ns: SOUDAL102421
r: 03213539 p: 6.937 pid: 122125 b: SOUDAL q: 0 st: lt: 6 ean: 5411183171541 sr: SOUDAL 154260 sr_no_br: 154260 sr_no_br_cl: 154260 sr_cl: SOUDAL154260 sr_dash: sold: 76.307 p_range: none type: standard act: 1 avo: 1 av: Net volume 600 ml EUH-statements EUH208; EUH210 Relative density 1 ADR packing group UN number ADR class Physical state Liquid Packaging Sausage n: SOUDAL Soudatight LQ air- and vapour-tight membrane black (600 ml sausage) - 154260 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Soudatight LQ is a high-quality fibre-reinforced polymer paste that, once dry, forms an air- and vapour-tight elastic membrane. Use Soudatight LQ for air- and vapour-tight sealing of penetrations, window, floor-wall, wall-ceiling and roof connections. The product can be applied very easily with a flat brush. Cracks up to 2 mm can easily be bridged thanks to the fibre reinforcement. Soudatight LQ changes colour when dry (= visual check). Properties: Air- and vapour-tight Fibre reinforced making it suitable for crack bridging up to 2 mm Very good adhesion to many porous materials Good adhesion on slightly damp substrates Permanently elastic after curing and very durable Can be painted over and plastered after drying Meets GEV-EMICODE EC-1 PLUS: very low emission Applications: For air- and vapour-tight finishing of penetrations, seams, gaps, cracks and openings, wall/floor connections, wall/ceiling connections and window connections such as inside inner leaf (day side) and outside inner leaf (for application of facade insulation). Instructions for use: Allow Soudatight LQ to reach room temperature before use. Shake or stir well before use. Soudatight LQ is applied to the substrate directly from the packaging using a flat brush. The product should be smeared/coated onto the substrate. Apply the airtightness paste undiluted and evenly in several layers (at least 2) to the substrate to a layer thickness of minimum 1 mm and maximum 3 mm. For best coverage, apply the product at a different angle the second time. It is recommended to apply the 2nd coat only after skin formation occurs with the first coat. The application thickness should be measured (wet) using a thickness gauge. For window applications ensure that the airtightness paste forms a seamless membrane of at least 3 mm on the window frame, over the flexible foam up to ± 5 cm on the day side of the building shell. The use of masking tape (on the window frame) is recommended. However, this should be removed shortly after the application of Soudatight LQ, before curing. For wall connections, ensure that the airtightness paste forms a seamless membrane of ± 15 cm on both surfaces. Before curing, Soudatight LQ can be removed from materials and tools with water. ds: dsc: kts: air- and vapour-tight membrane black (600 ml sausage) kpn: Soudatight LQ kpn_dash: kpn_clear: SoudatightLQ bkpn: SOUDAL Soudatight LQ bkpn_clear: SOUDAL SoudatightLQ c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 154260 sr_ns: SOUDAL154260
