Efficient extraction with Skf
- Access in tight spaces: The specialized separator design lets you easily insert the blades between the bearing and shaft shoulder.
- Safe shaft centering: The spring-loaded center point ensures you align the spindle precisely without damaging the shaft end.
- Direct inner ring grip: Firm contact behind the inner ring ensures you transmit pulling forces directly without stressing rolling elements.
With the Skf tmbs 50E strong back puller set, you can easily dismount bearings, gears, and pulleys from shafts where standard jaw pullers cannot fit. The slim separator blades slide directly between the bearing and the shaft shoulder, gripping firmly behind the inner ring so no pulling force stresses the rolling elements. Its mechanical spindle delivers up to 30 kN of withdrawal force with a maximum reach of 110 mm, while the spring-loaded center point protects the shaft end from damage. Ideal for shaft diameters from 7 to 50 mm, the set includes a separator unit, beam, mechanical spindle, two main rods, and a carrying case.
Scope of delivery
- 1 x separator set
- 1 x beam
- 1x mechanical spindle
- 2 x main rods
- IFU QR code card
- Case
Product description
The SKF TMBS 50E strong back puller facilitates dismounting of bearings in applications where the use of traditional jaw pullers is restricted due to lack of space or when the application requires a long reach. The puller is operated mechanically and especially suitable for small shaft diameters. A special separator design is used that can be easily inserted between the bearing and the shoulder on the shaft.
- Easily separator placement between bearing and shoulder on the shaft
- Spring-loaded centre point of spindle allows easy puller centring and minimises the risk of shaft damage
- Dismounting force is generated by mechanical spindle
- Firm grip behind the bearing's inner ring reduces the force required to dismount the bearing