SKF PCMW 122401.5 E PTFE composite pivot ring 12 x 24 x 1.5 mm

Supplier number: SKF PCMW 122401.5 E | EAN 7316572486191

4.66 tax incl.

€3.85 excl. VAT (incl. all environmental contributions)

On stock - immediately available

Delivery by DHL

↓ Documents (1) ✆ Talk to a specialist

Reliable axial performance with PCMW 122401.5 E

Practical benefits

Completely maintenance-free operation: The self-lubricating PTFE composite layer ensures you achieve smooth, low-friction motion without requiring external lubricants.
High axial load support: Built with a rigid steel backing, it allows you to accommodate heavy axial forces during rotating and oscillating movements.
Efficient heat dissipation: The composite material transfers heat away quickly, enabling you to run at high sliding velocities without overheating.

In a nutshell

The right choise for

With the Skf pcmw 122401.5 e thrust washer, you achieve dependable axial guidance in compact mechanical designs. Measuring 12 x 24 x 1.5 mm, this thin-walled ring accommodates heavy axial forces during rotating and oscillating shaft movements. Thanks to its self-lubricating ptfe composite layer, you eliminate direct metal-to-metal contact and wear without needing external lubricants. The composite design provides efficient heat dissipation, allowing for higher sliding velocities in dry-running conditions. In addition, the integrated locating hole accommodates a pin or screw to prevent the washer from rotating on its seat, keeping your equipment running smoothly and completely maintenance-free.

Product information FAQ

€4.66

In stock - tax incl.

Key features according to our expert

Inner diameter: 12 mm
Outer diameter: 24 mm
Width: 1,5 mm

Product description

SKF PTFE composite thrust washers are suitable for rotating and oscillating movements, and can accommodate heavy axial loads. They have as standard a hole to take a pin or screw to prevent the washers from rotating on their seat. The material provides good heat dissipation, therefore enabling relatively high sliding velocities.

Maintenance-free operation
Cost-effective with long service life
High operating temperatures
High load carrying capacity
High sliding velocity

Documents

⤓ Technical data sheet PDF

All Features

Inner diameter: 12 mm
Outer diameter: 24 mm
Width: 1,5 mm
Outside diameter: 24
Height: 1.5
Material: PTFE composite
Basic dynamic load rating: 28
Bore diameter: 12
Basic static load rating: 85

Brand SKF
01331079
EAN 7316572486191
Supplier number SKF PCMW 122401.5 E

Frequently asked questions about this product

Answered by specialists

What are the dimensions of this thrust washer?: The thrust washer has an inside diameter of 12 mm, an outside diameter of 24 mm, and a thickness of 1.5 mm.
What types of loads is the SKF PCMW 122401.5 E designed for?: It is designed to accommodate heavy axial loads in rotating and oscillating movements.
Does this PTFE composite thrust washer require lubrication?: No, thanks to its self-lubricating PTFE sliding layer, it operates completely maintenance-free.
How do you prevent the washer from rotating on its seat?: It features a standard locating hole to fit a pin or screw that prevents rotation on the seat.