What are the dimensions of this plain bushing?

The bushing has an inside diameter of 25 mm, an outside diameter of 28 mm, and a width of 30 mm.

Is this SKF plain bearing bushing maintenance-free?

Yes, thanks to the self-lubricating PTFE composite layer, it operates completely maintenance-free without relubrication.

Does the SKF PCM 252830 E have a flange?

No, this model is a straight cylindrical plain bushing without a collar or flange.

What types of motion is this bushing suitable for?

It is suitable for rotating, oscillating, and linear movements accommodating radial loads.

What shaft and housing fits are recommended?

SKF recommends an f7 tolerance fit for the shaft and an H7 tolerance fit for the housing bore.

SKF PCM 252830 E plain bearing bush PTFE composite 25 x 28 x 30 mm

Supplier number: SKF PCM 252830 E | EAN 7316571875156

5.41 tax incl.

€4.47 excl. VAT (incl. all environmental contributions)

On stock - immediately available

Delivery by DHL

↓ Documents (1) ✆ Talk to a specialist

Reliable dry running with the Skf PCM 252830 E

Practical benefits

Maintenance-free dry operation: The self-lubricating PTFE composite layer ensures you achieve smooth movement without additional lubrication.
High radial load capacity: Thin-walled steel construction allows you to support heavy radial forces in oscillating and rotating setups.
Effective heat dissipation: Strong thermal conductivity helps you maintain consistent performance at higher sliding speeds and temperatures.

In a nutshell

The right choise for

With the Skf pcm 252830 e straight plain bearing bushing, you ensure dependable, maintenance-free performance in compact mechanical assemblies. The self-lubricating ptfe composite sliding layer delivers smooth operation without the need for grease or oil, keeping downtime and service intervals to a minimum. Despite its thin-walled profile measuring 25 mm inside diameter, 28 mm outside diameter, and 30 mm width, it easily supports heavy radial loads. Efficient heat dissipation maintains consistent operation across rotating, oscillating, and linear motions. It gives you a reliable solution to keep industrial machinery, agricultural equipment, and material handling systems running smoothly.

Product information FAQ

€5.41

In stock - tax incl.

Key features according to our expert

Inner diameter: 25 mm
Width: 30 mm
With collar: No
Material (plain bearing bush): PTFE composite
Outer diameter: 28 mm

Product description

SKF PTFE composite straight (cylindrical) bushings are suitable for oscillating, rotating and linear movements, and can accommodate radial loads. Despite their thin-walled design, they can accommodate heavy loads. They also provide good heat dissipation, therefore enabling relatively high sliding velocities.

Maintenance-free operation
Cost-effective with long service life
High operating temperatures
High load carrying capacity
High sliding velocity and small operating clearance

Documents

⤓ Technical data sheet PDF

All Features

Inner diameter: 25 mm
Width: 30 mm
With collar: No
Material (plain bearing bush): PTFE composite
Outer diameter: 28 mm
Material: PTFE composite
Relubrication feature: Without
Basic static load rating: 183
Bore diameter: 25
Basic dynamic load rating: 58.5
Outer diameter: 28
Design: Straight

Brand SKF
01330651
EAN 7316571875156
Supplier number SKF PCM 252830 E

Frequently asked questions about this product

Answered by specialists

What are the dimensions of this plain bushing?: The bushing has an inside diameter of 25 mm, an outside diameter of 28 mm, and a width of 30 mm.
Is this SKF plain bearing bushing maintenance-free?: Yes, thanks to the self-lubricating PTFE composite layer, it operates completely maintenance-free without relubrication.
Does the SKF PCM 252830 E have a flange?: No, this model is a straight cylindrical plain bushing without a collar or flange.
What types of motion is this bushing suitable for?: It is suitable for rotating, oscillating, and linear movements accommodating radial loads.
What shaft and housing fits are recommended?: SKF recommends an f7 tolerance fit for the shaft and an H7 tolerance fit for the housing bore.