SKF LGEV 2/0.035 bearing grease (tube 35 g)

Supplier number: SKF LGEV 2/0.035 | EAN 7316571391885

From 30 piece €9.55

From 60 pieces €8.59 - €57.28 saving

From 90 pieces €8.11 - €128.88 saving

9.55 tax incl.

€7.89 excl. VAT (incl. all environmental contributions)

On order: delivered from 27/10/2026

The minimum purchase order quantity for the product is 30.

Delivery by DHL

↓ Documents (2) ✆ Talk to a specialist

Product information

€9.55

tax incl.

Key features according to our expert

Weight: 35 g
EUH-statements: EUH208; EUH210
ADR packing group: Not applicable
ADR class: Not applicable
UN number: Not applicable
Physical state: Solid
Packaging: Tube

Product description

A mineral oil based grease, using a lithium-calcium soap. Its high content of molybdenum disulphide and graphite, in conjunction with an extremely high viscosity oil, provide outstanding protection under the harshest conditions involving high loads, slow rotations and severe vibrations.

Extremely suitable for lubricating large sized spherical roller bearings subject to high loads and slow rotations, a situation where microslip is likely to occur
Extremely mechnically stable providing good water resistance and corrosion protection

Supplemental hazard information

EUH208: Contains ... (see safety data sheet). May produce an allergic reaction.
EUH210: Safety data sheet available on request.

Documents

⤓ Technical data sheet PDF ⤓ Safety sheet PDF

All Features

Weight: 35 g
Euh-statements: EUH208; EUH210
Adr packing group: Not applicable
Adr class: Not applicable
Un number: Not applicable
Physical state: Solid
Packaging: Tube
Suitable for applications with severe vibrations: +
Base oil type: Mineral
Suitable for applications with oscilating movements: O
Ep performance - 4 ball - weld load (min.) din 51350/4: 3000
Operating temperature range: -10-120
Penetration din iso 2137, prolonged (max.), 100 000 strokes, 10¯¹mm: +50
Corrosion protection, emcor, iso 11007 modified, 0.5% nacl: 2-2
Ep performance - 4 ball - wear scar (max.) din 51350/5, 1400n: 1.2
Nlgi consistency class: 2
Din 51825 code: KPF2K-10
Mechanical stability, v2f test, 144 hrs: M
Suitable for applications that require rust protection: +
Suitable for applications that require water resistance: +
Oil separation din 51817, 40°c, %: 1-5
Available for single point lubrication: no
Base oil viscosity din 51562 at 100 °c: 47
Lubrication ability, r2f test b at 120°c: Pass at 100°C
Mechanical stability - roll stability, astm d1831 (max.) 50 hrs at 80°c, 10¯¹mm: +50
Suitable for vertical shaft applications: O
Speed (max.) n x dm (x 1000): 300
Shelf life: 5
Color code: Black
Packsize: 35 g tube
Suitable for applications that require frequent start-up: ++
Penetration din iso 2137, worked, 60 strokes (10¯¹mm): 265 - 295
Dropping point (min) iso 2176: 180
Rolling bearing grease life (max.) rof test, l50 life, 10000 r/min, hrs at °c: 1000 at 100°C
Suitable for high load applications: ++
Corrosion protection, emcor, iso 11007 modified, water washout: 0-0
Copper corrosion (max.) din 51811 /astm d4048, 24 hrs at 100°c: 1 max.
Corrosion protection, emcor, iso 11007, distilled water: 0-0
Thickener: Lithium/calcium
Water resistance (max.) din 51807/1, 3 hrs at 90 °c: 1