SKF KMT 7 locknut 35 x 54 x 22 mm M35x1.5

Supplier number: SKF KMT 7 | EAN 7316577292605

Recommended Retail Price €167.16

82.60 tax incl.

€68.26 excl. VAT (incl. all environmental contributions)

On stock - immediately available | we have 2 products in stock.

Delivery by DHL

↓ Documents (1) ✆ Talk to a specialist

Accurate and secure shaft locking

Practical benefits

Reliable Skf locking mechanism: Three integrated locking pins allow you to secure bearings accurately at right angles to the shaft.
No keyway needed: You install the nut directly onto M35X1.5 threads without requiring additional locking washers or shaft slots.
Simple reusable adjustment: The design lets you precisely compensate for angular deviations and dismount components easily during maintenance.

In a nutshell

The right choise for

With the Skf kmt 7 precision lock nut, you secure and position bearings accurately and securely on shafts. Featuring three integrated locking pins, it enables precise right-angle alignment while compensating for slight angular deviations of adjacent components. Because it mounts directly onto M35X1.5 threads, you do not need shaft keyways or extra lock washers, preserving shaft strength and saving installation time. With an outer diameter of 54 mm and a width of 22 mm, this robust lock nut withstands high axial loads without damaging the thread. It allows simple preload adjustment, effortless dismounting, and dependable reusability during machine maintenance.

Product information FAQ

€82.60

In stock - tax incl.

Key features according to our expert

Outer diameter: 54 mm
Width: 22 mm
Thread designation: M35 x 1,5

Product description

KMT precision lock nuts are intended for applications where high precision, simple assembly and reliable locking are required. The three equally-spaced locking pins enable these lock nuts to be accurately positioned at right angles to the shaft. However, they can also be adjusted to compensate for slight angular deviations of adjacent components. Maximum axial run-out between the locating face and thread (up to size 40): 0.005 mm

No keyway required
Withstands high axial loads
Reliable, effective locking mechanism
Designed for frequent and simple installation and removal
Available for thread M 10x0.75 to M 200x3 (sizes 0 to 40) and Tr 220x4 to Tr 420x5 (sizes 44 to 84)

Documents

⤓ Technical data sheet PDF

All Features

Outer diameter: 54 mm
Width: 22 mm
Thread designation: M35 x 1,5
Outside diameter: 54
Bore diameter: 35
Associated mounting tool: HN 7
Nut for hydraulic mounting: No
Locking device: Incorporated in the lock nut

Brand SKF
01231009
EAN 7316577292605
Supplier number SKF KMT 7

Frequently asked questions about this product

Answered by specialists

What are the dimensions of this lock nut?: The lock nut features an M35x1.5 thread, an outer diameter of 54 mm, and a width of 22 mm.
Is a shaft keyway required for installation?: No, it locks directly onto the thread using three integrated locking pins, so no keyway is needed.
Which tool is used to mount the SKF KMT 7?: You can tighten it using an SKF HN 7 hook spanner or a 50 mm spanner.
Can this precision lock nut be reused?: Yes, the locking pin mechanism does not damage the shaft thread, allowing frequent mounting and dismounting.
What is the main application for the KMT 7?: It is designed for accurate axial positioning and secure locking of bearings on shafts.